Equipment Block

Hi,
I have created a truck as an equipment.When i do a preventive or Breakdown maintenence,i should be able to do the delivery of my final product by using this truck.How to map this scenario into SAP

Hi Mrugan,
As I mentioned in my previous explanation.
step1: All the trunks maintenance should have special dedicated order types
step2: Create the User status profile as per your requirment i.e
a.) Maintain the status 0010: Mainteance
b) Maintain the status 0020: Ready to deliver
After maintaining the status assign this status profile to Order type.
So now your status is ready for the dedicated order types for truck maintenance
Now When ever you create order for truck ( example in your case truck is equipment) you see two user status
1. Maintenance
2. Ready to deliver
take the help of ABAP person with user exist ask him to put the check while creating the delivery VL01N system should check the status.
IF the user status of the order is Maitnenace it should allow to create the delivery
if and only if the stus is ready to deliver it should allow to create the delivery.
With this you can able to block the truck( equipment) to create the delivery when under maintenance.
Note: you can create status profile in OIBS.( which has create option)
With this you can map ur senario.
Thanks
regards
Krishna

Similar Messages

How to process such kind of XML data?

Hi gurus,
I need your help in processing this kind of XML data. Please note the ns# value can go up all the way to the 1000's. Thanks.
<AllStatuteQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/3.0">
<ns1:Statutes xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/3.0">
<ns1:Statutes>
<ns2:StatuteId xmlns:ns2="http://crimnet.state.mn.us/mnjustice/statute/3.0">1</ns2:StatuteId>
<ns3:Chapter xmlns:ns3="http://crimnet.state.mn.us/mnjustice/statute/3.0">84</ns3:Chapter>
<ns4:Section xmlns:ns4="http://crimnet.state.mn.us/mnjustice/statute/3.0">82</ns4:Section>
<ns5:Subdivision xmlns:ns5="http://crimnet.state.mn.us/mnjustice/statute/3.0">1a</ns5:Subdivision>
<ns6:Year xmlns:ns6="http://crimnet.state.mn.us/mnjustice/statute/3.0">0</ns6:Year>
<ns7:LegislativeSessionCode xmlns:ns7="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns7:StatuteCode>
<ns7:code>4</ns7:code>
<ns7:description>4</ns7:description>
</ns7:StatuteCode>
</ns7:LegislativeSessionCode>
<ns8:SessionTextIndicator xmlns:ns8="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns8:SessionTextIndicator>
<ns9:HeadNoteIndicator xmlns:ns9="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns9:HeadNoteIndicator>
<ns10:EffectiveDate xmlns:ns10="http://crimnet.state.mn.us/mnjustice/statute/3.0">1859-01-01</ns10:EffectiveDate>
<ns11:EnactmentDate xmlns:ns11="http://crimnet.state.mn.us/mnjustice/statute/3.0">1859-01-01</ns11:EnactmentDate>
<ns12:RepealedIndicator xmlns:ns12="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns12:RepealedIndicator>
<j:DocumentLocationURI xmlns:j="http://www.it.ojp.gov/jxdm/3.0.2">
<j:ID xsi:type="j:TextType" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">http://www.revisor.leg.state.mn.us/stats/84/82.html</j:ID>
</j:DocumentLocationURI>
<ns13:SummaryDescriptionText xmlns:ns13="http://crimnet.state.mn.us/mnjustice/statute/3.0">Snowmobiles-Snowmobile registration</ns13:SummaryDescriptionText>
<ns14:StatuteFunction xmlns:ns14="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns14:StatuteIntegrationId>1</ns14:StatuteIntegrationId>
<ns14:FunctionCode>
<ns14:StatuteCode>
<ns14:code>1</ns14:code>
<ns14:description>Charge</ns14:description>
</ns14:StatuteCode>
</ns14:FunctionCode>
<ns14:CrimeOfViolenceIndicator>false</ns14:CrimeOfViolenceIndicator>
<ns14:EnhanceableIndicator>false</ns14:EnhanceableIndicator>
<ns14:TargetedMisdemeanorIndicator>false</ns14:TargetedMisdemeanorIndicator>
<ns14:RegisterableOffenseIndicator>false</ns14:RegisterableOffenseIndicator>
<ns14:JuvenileOnlyIndicator>false</ns14:JuvenileOnlyIndicator>
<ns14:MandatoryAppearanceIndicator>false</ns14:MandatoryAppearanceIndicator>
<ns14:OffenseLevelCode>
<ns14:StatuteCode>
<ns14:code>PM</ns14:code>
<ns14:description>Petty Misdemeanor</ns14:description>
</ns14:StatuteCode>
</ns14:OffenseLevelCode>
<ns14:GeneralOffenseCode>
<ns14:StatuteCode>
<ns14:code>4</ns14:code>
<ns14:description>DWI/Traffic/Vehicle Regulation</ns14:description>
</ns14:StatuteCode>
</ns14:GeneralOffenseCode>
<ns14:DetailedOffenseCode>
<ns14:StatuteCode>
<ns14:code>499</ns14:code>
<ns14:description>Traffic/Transportation</ns14:description>
</ns14:StatuteCode>
</ns14:DetailedOffenseCode>
<ns14:OffenseSummaryCode>
<ns14:StatuteCode>
<ns14:code>J</ns14:code>
<ns14:description>Traffic/Accidents(exclude DWI)</ns14:description>
</ns14:StatuteCode>
</ns14:OffenseSummaryCode>
<ns14:OffenseSummarySeverityLevelCode>
<ns14:StatuteCode>
<ns14:code>28</ns14:code>
<ns14:description>Rank 28</ns14:description>
</ns14:StatuteCode>
</ns14:OffenseSummarySeverityLevelCode>
</ns14:StatuteFunction>
<ns15:StatuteFunction xmlns:ns15="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns15:StatuteIntegrationId>2</ns15:StatuteIntegrationId>
<ns15:FunctionCode>
<ns15:StatuteCode>
<ns15:code>1</ns15:code>
<ns15:description>Charge</ns15:description>
</ns15:StatuteCode>
</ns15:FunctionCode>
<ns15:CrimeOfViolenceIndicator>false</ns15:CrimeOfViolenceIndicator>
<ns15:EnhanceableIndicator>false</ns15:EnhanceableIndicator>
<ns15:TargetedMisdemeanorIndicator>false</ns15:TargetedMisdemeanorIndicator>
<ns15:RegisterableOffenseIndicator>false</ns15:RegisterableOffenseIndicator>
<ns15:JuvenileOnlyIndicator>false</ns15:JuvenileOnlyIndicator>
<ns15:MandatoryAppearanceIndicator>false</ns15:MandatoryAppearanceIndicator>
<ns15:OffenseLevelCode>
<ns15:StatuteCode>
<ns15:code>M</ns15:code>
<ns15:description>Misdemeanor</ns15:description>
</ns15:StatuteCode>
</ns15:OffenseLevelCode>
<ns15:GeneralOffenseCode>
<ns15:StatuteCode>
<ns15:code>4</ns15:code>
<ns15:description>DWI/Traffic/Vehicle Regulation</ns15:description>
</ns15:StatuteCode>
</ns15:GeneralOffenseCode>
<ns15:DetailedOffenseCode>
<ns15:StatuteCode>
<ns15:code>499</ns15:code>
<ns15:description>Traffic/Transportation</ns15:description>
</ns15:StatuteCode>
</ns15:DetailedOffenseCode>
<ns15:OffenseSummaryCode>
<ns15:StatuteCode>
<ns15:code>J</ns15:code>
<ns15:description>Traffic/Accidents(exclude DWI)</ns15:description>
</ns15:StatuteCode>
</ns15:OffenseSummaryCode>
<ns15:OffenseSummarySeverityLevelCode>
<ns15:StatuteCode>
<ns15:code>28</ns15:code>
<ns15:description>Rank 28</ns15:description>
</ns15:StatuteCode>
</ns15:OffenseSummarySeverityLevelCode>
</ns15:StatuteFunction>
</ns1:Statutes>
<ns1:Statutes>
<ns16:StatuteId xmlns:ns16="http://crimnet.state.mn.us/mnjustice/statute/3.0">2</ns16:StatuteId>
<ns17:Chapter xmlns:ns17="http://crimnet.state.mn.us/mnjustice/statute/3.0">219</ns17:Chapter>
<ns18:Section xmlns:ns18="http://crimnet.state.mn.us/mnjustice/statute/3.0">383</ns18:Section>
<ns19:Subdivision xmlns:ns19="http://crimnet.state.mn.us/mnjustice/statute/3.0">3</ns19:Subdivision>
<ns20:Year xmlns:ns20="http://crimnet.state.mn.us/mnjustice/statute/3.0">0</ns20:Year>
<ns21:LegislativeSessionCode xmlns:ns21="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns21:StatuteCode>
<ns21:code>4</ns21:code>
<ns21:description>4</ns21:description>
</ns21:StatuteCode>
</ns21:LegislativeSessionCode>
<ns22:SessionTextIndicator xmlns:ns22="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns22:SessionTextIndicator>
<ns23:HeadNoteIndicator xmlns:ns23="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns23:HeadNoteIndicator>
<ns24:EffectiveDate xmlns:ns24="http://crimnet.state.mn.us/mnjustice/statute/3.0">1859-01-01</ns24:EffectiveDate>
<ns25:EnactmentDate xmlns:ns25="http://crimnet.state.mn.us/mnjustice/statute/3.0">1859-01-01</ns25:EnactmentDate>
<ns26:RepealedIndicator xmlns:ns26="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns26:RepealedIndicator>
<j:DocumentLocationURI xmlns:j="http://www.it.ojp.gov/jxdm/3.0.2">
<j:ID xsi:type="j:TextType" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">http://www.revisor.leg.state.mn.us/stats/219/383.html</j:ID>
</j:DocumentLocationURI>
<ns27:SummaryDescriptionText xmlns:ns27="http://crimnet.state.mn.us/mnjustice/statute/3.0">Railroads-Railroad Equipment Block Crossing More Than 10 Minutes</ns27:SummaryDescriptionText>
<ns28:StatuteFunction xmlns:ns28="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns28:StatuteIntegrationId>3</ns28:StatuteIntegrationId>
<ns28:FunctionCode>
<ns28:StatuteCode>
<ns28:code>1</ns28:code>
<ns28:description>Charge</ns28:description>
</ns28:StatuteCode>
</ns28:FunctionCode>
<ns28:CrimeOfViolenceIndicator>false</ns28:CrimeOfViolenceIndicator>
<ns28:EnhanceableIndicator>false</ns28:EnhanceableIndicator>
<ns28:TargetedMisdemeanorIndicator>false</ns28:TargetedMisdemeanorIndicator>
<ns28:RegisterableOffenseIndicator>false</ns28:RegisterableOffenseIndicator>
<ns28:JuvenileOnlyIndicator>false</ns28:JuvenileOnlyIndicator>
<ns28:MandatoryAppearanceIndicator>false</ns28:MandatoryAppearanceIndicator>
<ns28:OffenseLevelCode>
<ns28:StatuteCode>
<ns28:code>PM</ns28:code>
<ns28:description>Petty Misdemeanor</ns28:description>
</ns28:StatuteCode>
</ns28:OffenseLevelCode>
<ns28:GeneralOffenseCode>
<ns28:StatuteCode>
<ns28:code>4</ns28:code>
<ns28:description>DWI/Traffic/Vehicle Regulation</ns28:description>
</ns28:StatuteCode>
</ns28:GeneralOffenseCode>
<ns28:DetailedOffenseCode>
<ns28:StatuteCode>
<ns28:code>499</ns28:code>
<ns28:description>Traffic/Transportation</ns28:description>
</ns28:StatuteCode>
</ns28:DetailedOffenseCode>
<ns28:OffenseSummaryCode>
<ns28:StatuteCode>
<ns28:code>J</ns28:code>
<ns28:description>Traffic/Accidents(exclude DWI)</ns28:description>
</ns28:StatuteCode>
</ns28:OffenseSummaryCode>
<ns28:OffenseSummarySeverityLevelCode>
<ns28:StatuteCode>
<ns28:code>28</ns28:code>
<ns28:description>Rank 28</ns28:description>
</ns28:StatuteCode>
</ns28:OffenseSummarySeverityLevelCode>
</ns28:StatuteFunction>
</ns1:Statutes>
</AllStatuteQueryResponse>
Thanks!
Ben

Hi Mark, please help me again.
This is what I did and I don't get any data out.
declare
          cursor c_xmls is
          select cs.*
          from
          xmltable
               xmlnamespaces
                    'http://crimnet.state.mn.us/mnjustice/statute/service/3.0' as "cx",
                    'http://crimnet.state.mn.us/mnjustice/statute/messages/3.0' as "ns",
                    'http://crimnet.state.mn.us/mnjustice/statute/3.0' as "cs"
               '/cx:AllStatuteQueryResponse/ns:Statutes'
               passing v_xml
               columns
               StatuteID     number     path '//Statutes/StatuteId'
          ) cs;
     begin
          dbms_output.put_line('Processing started here');
          for c_sid in c_xmls loop
               dbms_output.put_line(c_xmls%rowCount || ' ID = ' || c_sid.StatuteId);
          end loop;
     end;
But if I use this (added the cs prefix) I get the error LPX-00601: Invalid token in: '//cs:Statutes/cs:StatuteId'
declare
          cursor c_xmls is
          select cs.*
          from
          xmltable
               xmlnamespaces
                    'http://crimnet.state.mn.us/mnjustice/statute/service/3.0' as "cx",
                    'http://crimnet.state.mn.us/mnjustice/statute/messages/3.0' as "ns",
                    'http://crimnet.state.mn.us/mnjustice/statute/3.0' as "cs"
               '/cx:AllStatuteQueryResponse/ns:Statutes'
               passing v_xml
               columns
               StatuteID     number     path '//cs:Statutes/cs:StatuteId'
          ) cs;
     begin
          dbms_output.put_line('Processing started here');
          for c_sid in c_xmls loop
               dbms_output.put_line(c_xmls%rowCount || ' ID = ' || c_sid.StatuteId);
          end loop;
     end;
Please tell me what I did wrong. Thanks a lot!
Ben

Blocking creation of order/notificaiton against a equipment

Hi Friends ,
My requirement is to block order/notification creation against an equipment . I have tried creating a user status and activating radio button for "forbidden" against following transactions :
But its not working . Please help . Am I missing something ...

Here is User-exit way of achieving this. Once code is put in the respective user-exit it is hassle-free. Only thing is it prevents at the time of Save. Suppose the Equipment user status which should not allow user to create Notification or Order is 'DAMG' (say damaged),
Code for user-exit QQMA0014 to prevent notification creation
IF I_VIQMEL-EQUNR IS NOT INITIAL.
DATA: BEGIN OF I_USTAT OCCURS 10.
          INCLUDE STRUCTURE BAPI_ITOB_STATUS .
DATA:END OF I_USTAT.
DATA: BEGIN OF I_SSTAT OCCURS 10.
          INCLUDE STRUCTURE BAPI_ITOB_STATUS .
DATA:END OF I_SSTAT.
CALL FUNCTION 'BAPI_EQUI_GETSTATUS'
    EXPORTING
      EQUIPMENT     = I_VIQMEL-EQUNR
    TABLES
      USER_STATUS   = I_USTAT
      SYSTEM_STATUS = I_SSTAT.
LOOP AT I_USTAT.
    IF I_USTAT-TEXT = 'DAMG'.
      MESSAGE: 'The Status of equipment does not allow Notification Creation'
      TYPE 'E' DISPLAY LIKE 'I'.
    ENDIF.
ENDLOOP.
ENDIF.
This gives this error pop-up while saving, and the Notification is not created.
Similarly the code attached herewith, if used in user-exit IWO10009, would prevent Order creation giving rise to similar error pop-up. Hope this would be useful to you.
KJogeswaraRao

Apple should do something for the equipment stolen something like block and only activated by key words given to register the device on the apple's website

Apple should do something for the equipment stolen something like block it(them) and only activated by key words given to register the device on the apple's website

Tell Apple:
http://www.apple.com/feedback
Doubtful that this would happen. Privacy laws would likely be tested with this.
No manufacturer does this.

Blocked scheduling defect equipment

Dear expert,
I have a query regarding defective equipment.
I used serial number management to track the history of equipment.
I replace equipment with the new one. After i dismantle defective equipment the equipment status is become AVLB (available). then, when i GI to Order that defective equipment using movement type 262, equipment status become ESTO (in warehouse).
My question is: is it possible to make automatic scheduling maintenance plan become "Blocked" (can't run scheduling) because the equipment status is ESTO? The maintenance plan should be able to be schedule again after we change the equipment number in the maintenance plan to the new one (new equipment). Is it possible?

Hi
I dont think there is any standard requirement for this.
You can check with abaper, to give a batch job... to pick the equipments with status ESTO and to deactivate the maintenance plan relevant to that equipment...
Also check whether u can do any enhancement in IP25 - Set deletion flag...
Where u can enter Equipment Status and search for the maintenance plan
Or
select the Equipment which have the ESTO status, enter it in IP25 and Execute
Excute in Test Run and then remove the Tick and Execute ... The plans corresponding to the equipments, the deletion flag will be set...
- Pithan

Firefox.exe message . "The procecedure entry point sqlite3_ob_status could not be located in the dynamic link library mozsqlite3.dll" - appears immediately and blocks further use of the equipment. How do I solve the problem?

Message
"Firefox.exe. The procedure entry point sqlite3_ob_status could not be located in the dynamic link library mozsqlite.dll"
Appears as soon as I try to use Firefox. Kit in Toshiba Net book.
No problems of this type before.

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

ASA 5505 NAT rules blocking inside traffic

Previous attempts to set up these NAT rules has been met with minimal success. We have been able to get the NAT rules created, and able to ping our inside servers and receivers from a different outside network, but every time we get that far our internal network crashes. Running the Packet Trace utility via the ASDM shows that internal traffic from the servers to the workstations is being blocked by the default implicit rule under the access rule heading that states "any to any, service being ip, action= deny". Reverse traffic from the workstations to the servers is being allowed though. In an effort to start over again, the Cisco ASA has been Factory Defaulted via the CLI, and has had it's Inside network, and Outside IP address set back up. DHCP pool has been setup for a minimal amount of addresses on the   inside network, since most of our equipment will always be assigned statics. We reset our static NAT policies, and seem to be having the same problem. My partner and I have been working on this for some time now, and have ourselves so frustrated that I know we are missing something simple. Any help will be greatly appreciated.
Embarq :          Network                                      xxx.xxx.180.104
Gateway:                                                             xxx.xxx.180.105
Subnet Mask:                                                     255.255.255.248
Our Static IP's:                                                    xxx.xxx.180.106 to xxx.xxx.180.110
Cisco Pix for VPN tunnels :                              xxx.xxx.180.107 outside IP
    used for DataBase Servers :                        100.1.0.2 Inside IP/ Gateway 2
Cisco ASA 5505:                                               xxx.xxx.180.106 outside IP
    all other traffic :                                              100.1.0.1 Inside IP/ Gateway 1
Inside Network:                                                 100.1.0.0/24
Application Server:                                          100.1.0.115 uses Gateway 1
BackUp AppSrvr:                                             100.1.0.116 uses Gateway 1
DataBase Server:                                            100.1.0.113 uses Gateway 2
BackUp DBSrvr:                                               100.1.0.114 uses Gateway 2
Cobox/Receiver:                                               100.1.0.140
BackUp Cobox:                                                 100.1.0.150
Workstation 1:                                                   100.1.0.112
Workstation 2:                                                   100.1.0.111
Network Speaker1,2,3,4:                                 100.1.0.125 to 100.1.0.128
Future Workstations:                                        100.1.0.0/24
1.           Embarq Gateway feeds both Cisco Pix, and Cisco ASA. Both Ciscos feed a Dell Switch.
2.           All inside network devices at 100.1.0.0/24 are networked into the Dell Switch.
3.           All Workstations/Network Speakers need to be able to communicate with all four servers, and   the Cobox/Receiver.
4.          The DataBase Servers have VPN tunnels created in the Pix for clients to be able to login securely and edit their account info.
5.          The App Server (100.1.0.115), and BackUp App Srvr (100.1.0.116) need to have a NAT rule created NAT'ing them to xxx.xxx.180.109.
      A.          The xxx.xxx.180.109 NAT rule needs to allow ALL UPD traffic TO and FROM ANY outside    IP address.
      B.          The xxx.xxx.180.109 NAT rule needs to allow ICMP traffic FROM ANY Outside IP address.
6.          The Cobox/Receiver (100.1.0.140) and BackUp Cobox (100.1.0.150) need to have a NAT rule created NAT'ing them to xxx.xxx.180.108
      A.          The xxx.xxx.180.108 NAT rule needs to allow UDP traffic FROM ANY Outside IP address source port 6000 or 9000 to destination port 9000
      B.           The xxx.xxx.180.108 NAT rule needs to allow ICMP traffic FROM ANY Outside IP address.
7.          Right now the Cisco PIX is functioning and working perfectly for our VPN tunnels.
8.
: Saved
ASA Version 8.2(5)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 100.1.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address xxx.xxx.180.106 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_4
protocol-object icmp
protocol-object udp
object-group protocol DM_INLINE_PROTOCOL_5
protocol-object icmp
protocol-object udp
access-list outside_access_in extended permit object-group DM_INLINE_PROTOCOL_3 any xxx.xxx.180.104 255.255.255.248
access-list outside_access_in extended permit object-group DM_INLINE_PROTOCOL_4 host xxx.xxx.180.108 any
access-list outside_access_in extended permit object-group DM_INLINE_PROTOCOL_5 host xxx.xxx.180.108 any
access-list inside_access_allow extended permit object-group DM_INLINE_PROTOCOL_2 100.1.0.0 255.255.255.0 100.1.0.0 255.255.255.0
access-list inside_access_allow extended permit object-group DM_INLINE_PROTOCOL_1 any any
access-list inside_nat_static extended permit udp host 100.1.0.140 eq 9000 any
access-list inside_nat_static_1 extended permit ip host 100.1.0.115 any
access-list inside_nat0_outbound extended permit ip 100.1.0.0 255.255.255.0 100.1.0.0 255.255.255.0
access-list outside_nat_static extended permit udp host xxx.xxx.180.108 eq 6000 host 100.1.0.140
access-list outside_nat_static_1 extended permit ip host xxx.xxx.180.109 host 100.1.0.115
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
no asdm history enable
arp timeout 14400
nat-control
global (inside) 1 100.1.0.3-100.1.0.254 netmask 255.0.0.0
nat (inside) 0 access-list inside_nat0_outbound
static (inside,outside) udp xxx.xxx.180.108 6000 access-list inside_nat_static
static (outside,inside) udp 100.1.0.140 9000 access-list outside_nat_static
static (inside,outside) xxx.xxx.180.109 access-list inside_nat_static_1
static (outside,inside) 100.1.0.115 access-list outside_nat_static_1
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 100.1.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 100.1.0.5-100.1.0.15 inside
dhcpd dns 71.0.1.211 67.235.59.242 interface inside
dhcpd auto_config outside interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
prompt hostname context
call-home reporting anonymous
Cryptochecksum:52e69fa95fcffd43ed9e73df320e3a55
: end
no asdm history enable

OK. Thank you very much for your help. I am going to get with the powers that be to upgrade the "Base" license in this ASA.
In the meantime I will Close and Rate this post for now so others can get this info also.
If we have any further issues after the upgrade, then I will open a new post.
Thanks again. We new it was something simple. Not sure how we overlooked that, but hey we're getting somewhere now.

Cannot activate used iPhone 5 - is it blocked somewhere?

My company had a branch office in Japan which recently closed. Among equipment in the office were several iPhone 5 devices, one of which was the loaner I used while in country. We canceled the contract with the carrier and (according to them) are paid in full, so I would like to activate that iPhone 5 in the USA to use as a touch and for APP/iOS testing purposes.
I've reset the phone and updated to 7.1.2 and when I try to activate over WiFi, I get a message that "Could Not Activate iPhone. Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes."
So, I tried to activate while connected to iTunes on both a PC & a Mac (both running current iTunes - 11.3) on different internet connections. Both give me the same message - "We're sorry, we are unable to continue your activation at this time. Please try again later, or contact customer care."
I've checked with the carrier (au/KDDI), who confirmed there is no problem on the account and that the phone should be able to be activated with the original SIM (which is in the phone). I'm not sure who else may have used the phone while visiting - maybe they connected it to their iCloud account or something? I'm struggling for answers since anybody who could have answered my questions are no longer with the company.
I guess I'm wondering who would be able to tell me what the problem is with activation - if there's an issue, is it an Apple thing or a carrier thing? If there's a block somewhere,
I tried calling Apple support, but since the phone isn't in warranty status any longer, they didn't want to help me very much.

When I turn on the phone, it brings me to the Hello screen, then I connect to WiFi (I have no service with the Japanese provider in the USA - the phone just says Searching...), and the phone goes off and tries to activate himself. After a few minutes, it comes back with the "Could Not Activate iPhone" message. I cannot get far enough with the phone to go into the Settings menu.
I've had some correspondence with the provider (au/KDDI), and they confirmed that they will not unlock the phone to be used with another carrier, but they do support it being used on WiFi as a glorified iTouch, which is what I'm hoping to do. They also confirmed there are no billing issues with the account.
I guess what I'm trying to understand is if the carrier would block the phone from activation for some reason or if that's an Apple thing. Or both? I would imagine the carrier could disallow the phone to be used on its network (stolen or whatever), but would the carrier have the ability block the device from being activated with Apple?

IOS 7 blocked uncertified chargers?Is there any way to fix this?

I just read that Apple blocked uncertified lightning cables with the ios 7! Those were the only ones I had that WORKED, APPLE! I have a box full of certified chargers that don't work. The optimism I had for a better quality charger lasted only as long as the first one that died...less than a month. Nine months ago we bought 3 iphone 5's and 2 iPads. None of those chargers work. I have HAD to buy chargers that were not certified because, really, who in their right mind would pay $30 for something that is designed to break (as evidenced by my "Box-O'-Apple-FAIL")?
It has to be one of two reasons.
1. They are purposely making faulty equipment.
2. They literally CAN'T figure out how to make a charger!
The "plug in, turn off, turn back on" didn't work. I'm hoping somebody has figured this out. If not... well played Apple, for fixing it so I have a box of crappy certified chargers and now a box of ones that you made sure I can't use and no Apple store within 120 miles!

Between my wife and I, we have 7 lightning cables covering home, work, and the cars... we have NEVER had one fail. Well.... we won't talk about the one the cat chewed up...
If they are failing that often for you, either you are doing something to physically damage them, or the power source you're using is highly unstable and is cooking the chip in them.

How to restrict the department to not user other departments' equipment?

Dear SAPIENTS,
How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
Regards,
Kaushal Rai

Kaushal Rai,
Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
goto the below path for cerating the Authorization group:
IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
Regards,
Praveen.

Work Center Block

Hi Experts,
We have one scenario
W/C in PP(wc category m/c) = Equipment in Plant maintenance
Is it possible to block the W/C automatically whenever there is creation of maintenance order for equipment(w/c for PP) so that it is blocked in routing and can not be used in production.
Thanks in advance,
Amit Kataria

Dear,
You can lock work center. if work center is lock, now production order will be created with locked work center.
If you require that whenever maintenance order created against specific equipment in which locked work center used, system will not allow to create production or production order execution. In SAP Maintenance, there is integration with PP that whenever maintenance order created, system will not allow to execute production order. Kindly consult with you PM consultant in this regard.
Thanks
Muhammad Ashfaq

Block production work center during maintenance order

Dear Experts,
iam trying to do the integration between PM and PP, I want to block the production work center from any production order when there is any maintenance order opened for a certain equipment which is inside this work center ,
till now i did the following:
1) the production work center is now inside the equipment location tab
2) when i open any maintenance order i put system condition as zero
now what i only achieved ,
- in transaction CM25 the capacity is black for the period of the maintenance order
BUT the work center is not blocked and any production order can be created without any error
please help and much thanks in advance
Best Regards

Hi,
Till time you have performed right things to integrate PP-PM & system is also responding according to setting.
Showing block capicity in CM25 against the Maintenance Order.
If you want to block production order as well, you need to do one more setting.
go to t- code OIOI, selection Production order types (those you want to block) & in capacity Availabilty choose Collect conversion as 3 : No creation if there is insufficiant caacity.
i hope this will definately solve your problem.
- Yatharth

To all of my friends in fb: please help me in blocking my stolen Ipad3 SN: DY******VD1 thanks so much, I would greatly appreciate if culprit would learn his lesson!

To all of my friends in fb: please help me in blocking my stolen Ipad3 SN: DY*****VD1 thanks so much, I would greatly appreciate if culprit would learn his lesson!
<Edited by Host>

Apple does not track nor block iPads. If it was equipped to access
cellular, report it to your cellular provider. Report the loss to your
local police. If covered by your insurance, report to your insurance
company.
Immediately change all of your passwords.
If you had previously set it up, you may be able to track it via
Find my iPhone.
Texas Mac Man has some excellent links in this thread:
https://discussions.apple.com/thread/4869627?tstart=270
Message was edited by: imobl added link to Texas Mac Man post

Equipment download from ECC 6.0 to CRM 7.0

Hi Guys,
I am trying to Replicate equipments from ECC 6.0 to CRM 7.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
SURESH.

Hi,
go to ERP.
check there the table CRMRFCPAR
Is there an entry for OBJ_NAME EQUIPMENT?
If no create it.
If yes check this entry if everything looks fine.
Afterwards start a new initial load.
Best regards
Manfred

Equipment range is not updating

Hi Guys
I need help with the report, It is working fine with one equipment but when I placed the range it is not displaying between the equipments that many records.
Any correction in the report please comment
REPORT Z_FUEL LINE-SIZE 200 LINE-COUNT 75
NO STANDARD PAGE HEADING.
TABLES : equi,
equz,
imptt,
imrg,
eqkt,
iloa.
Type Declaration
TYPES: BEGIN OF ty_data ,
        equnr type equnr, " Euipment no
        eqktx type eqkt-eqktx, " Equipment Text
        eqfnr type iloa-eqfnr, " Equipment Sort field
        idate type imrg-idate, " Measuring Date
        recdu type imrg-recdu, " Unit of measuring ='KM','L','H'
        recdv type imrg-recdv, " Counter reading data
      END OF ty_data.
TYPES: BEGIN OF ty_final,
        equnr type equnr, " Equipment no
        eqktx type eqkt-eqktx, " Equipment Text
        eqfnr type iloa-eqfnr, " Equipment Sort field
        min_date type imrg-idate, " Min Date
        min_km type p decimals 2, " Max Km
        max_km type p decimals 2, " Min km
        t_max_min_km type i, " Total min_km-max_km
        max_date type imrg-idate, " Max Date
        min_hr type imrg-recdv, " Max hr
        max_hr type imrg-recdv, " Min hr
        t_max_min_hr type i, " Total min_hr-max_hr
        min_lit type imrg-recdv, " Max lit
        max_lit type imrg-recdv, " Min lit
        t_max_min_lit type i, " Total min_lit-max_lit
        fuel_con type p decimals 2, " Total_hrs / t_max_min_hr
        km_l type p decimals 2, " km / L
        lit_per_hr type i , " fuel comsumed / t_max_min_hr
      END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
      wa_data TYPE ty_data, " work area
      i_final TYPE TABLE OF ty_final, " internal table
      wa_final TYPE ty_final. " work area
data: begin of itab occurs 0,
num type i,
end of itab.
data: v_min_1 type i,
v_max_1 type i,
min like imrg-recdv,
max like imrg-recdv,
max_dt like imrg-idate,
min_dt like imrg-idate,
t_ma_mi type p decimals 2,
V1 LIKE IMRG-RECDV ,
V2 LIKE IMRG-RECDV .
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr ,"no-extension no intervals,
p_idate FOR imrg-idate, "NO-EXTENSION NO INTERVALS OBLIGATORY,
p_recdu FOR imrg-recdu. "NO-EXTENSION NO INTERVALS default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/1(40) ' INVESTMENT LIMITED '.
WRITE:/50(40) ' FUEL CONSUMPTION REPORT ' CENTERED ,
2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Date From :'.
write: /2 'Equipment No :'.
write: /2 'Unit :'.
SKIP.
ULINE.
WRITE:/1 sy-vline,
2 'EQUIP NO', 10 sy-vline,
11 'NAME', 40 sy-vline,
41 'min date', 50 sy-vline,
51 'max date', 60 sy-vline,
61 'min km', 70 sy-vline,
71 'max km' , 80 sy-vline,
81 't_max_min_km', 90 sy-vline,
91 'min hr', 100 sy-vline,
101 'max hr', 110 sy-vline,
111 't_max_min_hr' , 120 sy-vline,
121 'min lit', 130 sy-vline,
131 'max lit', 140 sy-vline,
141 't_max_min_lit', 150 sy-vline,
151 'fuel con', 160 sy-vline,
161 'km_l', 170 sy-vline,
171 'lit_per_hr', 180 sy-vline.
FORMAT COLOR 3 ON.
ULINE.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu ='KM' .
LOOP AT i_data into wa_data.
SORT i_data BY recdv ascending .
Read table i_data into wa_data index 1.
max = wa_data-recdv.
max_dt = wa_data-idate.
SORT i_data BY recdv descending .
Read table i_data into wa_data index 1.
min = wa_data-recdv.
min_dt = wa_data-idate.
t_ma_mi = min - max.
ENDLOOP.
ON CHANGE OF WA_DATA-EQUNR.
WRITE:/ wa_data-equnr,
        wa_data-eqktx,
        wa_data-eqfnr ,
        max_dt ,
        max EXPONENT 0 DECIMALS 2 ,
        wa_data-recdu,
        min_dt,
        min EXPONENT 0 DECIMALS 2,
        t_ma_mi EXPONENT 0 DECIMALS 2.
ENDON.

does anybody else have any suggestions ? i don't know what safe mode is and if that is taking all my security down sorry not running my internet w/out security. my question has been here forever nobody knows ?

Equipment Block

Similar Messages

Maybe you are looking for