Equivalent to VirtualBox Host-Guest Communication Manager in Hyper-V?

Hello,
Chapter 7 of the VirtualBox
SDK Programming Guide (pdf) explains that the "VirtualBox Host-Guest Communication Manager (HGCM) allows a guest application or a guest driver to call a host shared library."
Is there anything like this in Hyper-V?
The document also goes into a bit more details on the implementation, stating "HGCM uses the VMM virtual PCI device to exchange data between the guest and the host."
Is it possible to implement a 3rd-party virtual device in Hyper-V?
Thanks for your time!

Any form of network communication can be used between the virtual machine and its host in the same manner that two physical computers can communicate with one another. As Samir stated, this is a security boundary that was purposefully established.
There is a capability to pass key-value pairs between the host and guest.
https://technet.microsoft.com/en-us/library/dn798287.aspx?f=255&MSPPError=-2147217396
. : | : . : | : . tim

Similar Messages

Payment Rule maintenance per currency in Bank Communication Management

Hi,
We have maintained Rules for Payment Grouping in Bank Communication Management based on amount limits. The basic currency we expected is GBP so we have the same set of amount limits for all Company Codes until now.
We've now introduced a new Company Code which makes payments in USD. We'd like the same amount limits to be used for payments from this Company Code too.
Eg: We have a rule for amount range from 100K to 150K. If the payment is in GBP the rule gets picked up if the payment amount is between 100K GBP and 150K GBP.
Now if a USD payment is made of 130K USD, the above rule gets picked up. We would like to see that the GBP equivalent of 130K USD... i.e. 205K USD is considered as the amount and a suitable rule is picked up.
How do we achieve this in the rule definitions? I see that the Currency field limits the rule to be considered only for payments made in one currency. Is there a way of associating the amount limits to a base currency so that other currency payments will get converted against this currency and be evaluated?
Would appreciate any help in this regard as we're at a loss currently.
Thanks in advance.
Madhu

HI
Can you verify your payment run log? are there any payments available or not
Reg
Vishnu

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

Creating a virtualbox host

Hi,
When I try to add the virtualbox host server i get the following error:-
Step 2:Verify Certificate
Review the certificates below and click Finish to add the VirtualBox host.
ErrorWarningSuccessInformationVerification of VirtualBox Host Failed
java.net.SocketTimeoutException: Read timed out
SSH Certificate
ErrorIssued By: Required
217.77.5.43
ErrorFingerPrint: Required
f3:95:e5:c5:5e:97:3a:c3:ed:83:20:c1:e7:e9:8f:f2
SSL Certificate
ErrorIssued By: Required
Sun Microsystems
Menlo Park
Ca
US
ErrorMD5: Required
2BC59371313D911703F33D494A50738D
I can add the storage host no problems. Any ideas? The machine has had an IP change:-)
Cheers

was the machine a desktop provider in the vdi-manager before aou changed the IP?
is it still in the config with the old IP?
ragards,
Zoltan

New Community Manager?

I just spotted a NigelE who's a Community Manager.
But no mention of him here Has Kerry gone? Are there now two managers? Would you care to introduce yourself Nigel? Do you intend to make any improvements to the BTCare forums?
Value Added Guest (Inspiring Not Aspiring)
Rate a post if you like it! - just click the star under the user's name on the left. (N.B. ratings facility no longer available in Forum Help and Suggestions; nor is it available in the Lounge)

Hi Pasha_Selim
Thanks for the post. There was an error in the status showing for NigelE, this has now been corrected. Nigel is a mod and his bio will be uploaded in the 'meet the mods' section soon.
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How to find the server hosting office communication ?

Hello
How to find the server hosting office communication ?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hello,
I have:
DG URL Internal;https://OCS.ad.xxxxxx.xxxx.xxx/GroupExpansion/Int/service.asmx;--;
DG URL External;;--;
Quality Metrics URI;;--;
URL Internal From Server;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
URL External From Server;;--;
Voice mail URI;sip:[email protected];opaque=app:voicemail;--;
MRAS Server;;Not Configured;
GAL Status;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
Controlled Phones;TRUE;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Focus Factory;sip:[email protected];gruu;opaque=app:conf:focusfactory;--;
Telephony Mode;Telephony Mode Disabled;--;
Line;;--;
Line Configured From;Auto Line Configuration;--;
Location Profile;;--;
Local Log Folder;C:\Users\me\tracing;;
MAPI Information;MAPI Status OK;MAPI Status OK;
Inside User Status;TRUE;;
Auto Update Download Started;--;--;
Auto Update Download Completed;--;--;
Last Auto Update Request;--;--;
Pairing State;Communicator cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
I see my email on the sip line but no server... what do I miss?
Is it by the URL?
Thanks,
Dom

How to migrate from BE6000 to Communications Manager

Dear forum members,
first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
issues with our Cisco reseller (Deutsche Telekom/T-Systems).
It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
It took us (me and our reseller) over a year to set these things "right".
Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
I thought, "Hey, finally eveything works as expected..."
I was wrong, so wrong...
What happend? I tell you what happend...
During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
And that was the point when our communication stucked...
Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
Kind regards,
René

DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
I assume you've already verified your server is supported under 3rd party spec guidelines???
But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

Ask the Expert: Upgrading Cisco Unified Communications Manager (CUCM) to Version 9.1 (Drive to 9)

Welcome to the Cisco Support Community Ask the Expert conversation. Learn from experts Vijay Rao and Amit Singh about simplified upgrade process and focused support from Cisco to migrate to version 9.1.
This is a continuation of the live Webcast
Drive to 9 is a comprehensive and holistic program designed to help you upgrade the current Cisco® Unified Communications Manager installed base to version 9.1 or higher. This upgrade will enable customers to have next-generation collaboration experiences.
During the live event, Cisco subject matter experts Vijay Rao and Amit Singh focussed on the simplified upgrade process and focused support from Cisco to migrate to version 9.1. They also talked about the changes made to the licensing model of User Connect Licensing and Cisco Unified Workspace Licensing.
Vijay Rao is a Network Consulting Engineer and is currently a unified communications (UC) consultant for Bank of America. He has been providing consulting assistance to the bank for the past 6 years. He helps design complex UC networks for large enterprise customers. He was previously part of Cisco IT in the Asia Pacific, Japan, and China (APJC) region and was instrumental in designing and implementing the Bangalore campus. He has been working with Cisco for 9 years and has 12 years of UC experience. He has a Cisco CCVP® certification.
Amit Singh is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has 7 years of experience in his areas of expertise: wireless, Cisco Unified Communications Manager, multiservices, Cisco Unity®, and Cisco Unified Contact Center Express. He has been involved in various escalation requests from India, Singapore, and Australia and is currently working as a technical lead for the Voice team in Bangalore, India. He is a computer science graduate.
Remember to use the rating system to let Vijay and Amit know if you have received an adequate response.
Vijay and Amit might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community forum shortly after the event. This event lasts through July 19, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
Webcast related links:
Webcast Video
FAQ from the live webcast
Slides from the live webcast

Hello Robert,
Apologies for a delayed response, some days get very hectic.
In CallManager, we only define the SRST reference, and CUCM version and SRST version are independent of each other.
The only thing, which is related and will change with CUCM upgrade is Phone F/w version.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
You may just want to check your, phone f/w compatibility with the SRST version running on your ISR G1 Gateways:
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
For Example: SRST version 7.1
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
You may want to do some lab testing with CUCM 9.1 and an SRST supported f/w on your phones.
If you decide to run the old Phone/F/w to support the SRST version, you may not be able to take advantage of new features.
Also, you can try and upgrade your phones(Wih CUCM 9.1) and test them with your SRST version.
It should work fine, but from a troubleshooting perspective, TAC may request you to come into a Cisco Supported combination.
Please, let me know if this clarifies your doubt or we can have a quick phone call.
Regards
Amit Singh

Bank Communication Management - Incoming messages from Banks

Hi,
We are using Bank communication management. When we send our ACH and Wire files to the bank, the bank sends two confirmations: 1. First confirmation says that the file is received. 2. Second confirmation sends the total number of items and total amount in the payment file.
I have done the necessary configuration in BCM in the step shown below:
Financial Supply Chain Management ® Bank Communication Management ® Payment Status Management ® Map External Status to Internal Status
How do I update this in the payment monitor (T-CODE - BNK_MONI)?
SAP says
You must connect the XI system to the ERP system. The interface Collective Payment Order Notification must be set up. What is this interface 'Collective payment order notification' and where should I set it up?
Any help in this regard is greatly appreciated.
Kalyan

Hi Ankish,
As mentioned by Kalyan above (check suggestions from SAP in his comment), you should use the interface Collective Payment Order Notification given by SAP in ESR (Enterprise Service Repository) SAP APPL (SAP APPL 6.05). If your PI environment doesnot have it then you need to request yuor basis to download this from SAP.
After you download the ESR , you can find the standard Service interface called "CollectivePaymentOrderNotification_In" under Namespace http://sap.com/xi/APPL/Global2 .
Now once you have this interface downloaded, create a new message mapping using the message Type "CollectivePaymentOrderNotification_async" as Target, and your message from BANK or SWIFT (uploaded into PI as external definition) as source. Map the required fields , mainly map the external status code from BANK to ExecutionStatusCode field. Also map the required header fields.
Once you create the new mapping , create required Integration builder objects and you are all set.
The CollectivePaymentOrderNotification interface is proxy in ECC which has required methods to update the BCM with the status.
Also please check below links for more information.
http://help.sap.com/esoa_erp2005_ehp2/helpdata/en/46/802b59e186429ee10000000a1553f7/content.htm
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/22/e-payment-a-customized-solution-other-than-sap-integration-package-swift-part-3-receive-from-bank-push-to-sap-bcm
Regards,
Suresh

Ordering new 8.6 Unified communications manager

Hi everybody,
For the next year I'm going to order a new CUCM 8.6 system as replacement our old CallManager. I trying now to make a order list. We have 300 ip phones 7911,7941,7960,7970. Please help me out here, I've made this list, correct me if i'm wrong.
1. CUCM-USR-LIC
2. R-CUCM-USR-LIC
3. MCS-7816-I5-IPC1
4. UCM-7816-86
5. UCM-7816-86-KIT
6. UCSS-UCM
I know that it comes with starter license of 50 DLUs. After installation I can find out exactly DLUs number to order. Is it enough for me?
thanks.

Guys I've made a list with dynamic configuration tool. Is it correct? Please I need your advice. Is it enough?
Product
Description
Quantity
CUCM-USR-LIC
Top Level Sku For User License
1
LIC-CUCM-USR-A
Unified Communications Manager Enhanced Single User-Under 1K
300
UCSS-UCM-1-1-A
UC Manager Enh UCSS Less than 1K users - 1 user - 1 year
300
LIC-CUCM-BASIC-A
Unified Communications Manager Basic Single User-Under 1K
300
UCSS-UCM-BAS-1-1-A
UC Manager Basic UCSS Less than 1K users - 1 user - 1 year
300
UCM-7816-86-XU
CUCM 8.6 7816 Export Unrestricted Media Kit
2
CCX-85-CMBUNDLE-K9
CCX 8.5 Promo Bundle available only with NEW CUCM or BE6000
1
CUCM-PAK
Include PAK Auto-expanding PAK for CUCM
1
CUCM-USR
Include PAK Auto-expanding User for CUCM
3000
UCM-7816-86-KIT-XU
CUCM Auto-Expansion Media Kit
1
UCM-7816-NODE
CUCM 7816 Node
2
UCSS-UCM-BASIC-PAK
Include PAK Auto-expanding UCSS Basic PAK for CUCM
1
UCSS-UCM-PAK
Include PAK Auto-expanding UCSS PAK for CUCM
1

PC Suite Communications Manager Blank Messages

Hi,
I am using Windows XP SP3 with PC Suite 7.1.30.8. I am connecting to my Nokia 5310 through Bluetooth.
When I use the communications manager in PC suite to check on the SMSes on my phone, I see 5 blank messages. No matter how I try to delete these messages thru PC Suite, they always show up again when I sync. However on my phone itself, these blank message do hot show up. Example: I see 10 regular SMS and 5 blank SMS in PC suite, but when I access SMS directly on my phone, I only see the 10 regular SMS but not the 5 blank SMS.
Any way I can delete these blank SMSes?
Thanks

Hi,
You can also check the following post, if it could help you
/discussions/board/message?board.id=pcsuite&thread.id=36027

Adapter for Avaya communication manager

Hi Everyone,
Can anyone help me with the connector for Avaya communication manager?
I am confused which jar to use for Avaya communication manager and how to create the configuration file(XML) file for that,i mean fields that are required in XML file?
I have worked on the configuration of Sun java directory server with OIM.
Thanks in advance.
Satbir.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

Ideas on adding licenses to a 8.X Communications Manager cluster before upgrade to v10.

Hi, hope is all well. This is something I started working with my global Cisco reseller but it takes sometime I wanted to make sure I see different options if possible to present. My company has deployments of collaboration products mainly on v8.x (all three main 8.0.2, 8.5.1 and 8.6.2) going to v10 during this year. Some already run on UCS but some are on MCS and will be late in migration. For those late, there are some growth need in end user/phone deployment but since v8 is end of sale, my provider may not be able to sell licenses.
If this is true, they might offer to buy v10 licenses with software subscription just like new deployment, which is not too bad at all since we will use this added amount on future v10 upgrade, but has anyone ever did that? I am afraid we use v10 PAK (if possible) to generate v8 license file, will render it not upgradable later. Reasoning is, let's say there is 1000 licenses on v8 with UCSS and we buy 15 v10 licenses downgraded to v8. Once we processo v8 to v10 upgrade on PUT, Cisco might see only 1000 original v8 liceses to provide upgrade instead of 1015.
Does it make sense or am I missing something here? Thank you very much for any suggestions.

UCSS and CUCM 8.X licenses have both been EoL. Even the existing UCSS+ ESW has been converted to SWSS.
Ref: CUCM 8.X Device and Licenses EoL notification
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-732309.html
Customers may be able to continue to purchase Cisco Unified Communications Manager Version 8.x Phone Units and Device License Units the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Product Migration Options
Customers are encouraged to migrate to the Cisco Unified Communications Manager v 9.2 or later.
Ref: UCSS EoL
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-software-subscription/eos-eol-notice-c51-732026.html
-Terry
Please rate all helpful posts

What is Communication Manager?

if you now about that,plz give some information!
i need to know what is the job of communication manager, and what functions are needed to build it?

I'm sorry. with no context, I don't have any help for you.
We have "communication express", which is a unified client for our Messaging Server and Calendar Server.
I'm not familiar with "communication manager"

Workflow for Bank Communication Management

Hi ,
I need to find out any SAP workflows are responsible for the below activities in Bank communication management .
spro-Financial Supply Chain Management- > Bank Communication Management -> Release Strategy -> Change and Release ->
Assign Role to Release Steps , Here i am assigning rule - 96000144 against Rel Obj BNK_INI .
In pfac for rule 96000144 , i am assigning responsibilities where i am maintaining Agents ( User IDs ) .
The rule IDs specific to amount limits are maintained in SPRO under Financial Supply Chain Management- > Bank Communication Management -> Payment Grouping
When in t code bnk_moni , for Bat No , the approver list has to be displayed .
If anyone has any idea on Workflow related to Bank Communication Management , suggestion will be highly appreciated .
Regards
Prabhudutta

Please check OSS 1041016, it contains documentation on BCM WF setup.
Rememeber that release WF is needed only if you have more than one release step - first release step is always done via BNK_APP, at the moment it's hardcoded in BCM (if you have all the latest patches).
WBR -
Pauls

Equivalent to VirtualBox Host-Guest Communication Manager in Hyper-V?

Similar Messages

Maybe you are looking for