ERM Cannot approve a role: Invalid Priority Value

Hi all,
I'm implementing Enterprise Role Provisioning.
When I test my workflow and I click on the "approve" button the following message appears: "Create a valid request"
Looking at the log file, i found the following error message:
2009-05-15 10:17:49,655 [SAPEngine_Application_Thread[impl:3]_42] ERROR 2010 : com.virsa.ae.core.ObjectNotFoundException: Invalid Priority Value : RE_HIGH
It shold be a problem related to the Compliance User Provisioning module, but I can't understand what is missing.
Can you help?
Thanks

Hi Annamaria.
Do you create the priority RE_HIGH in CUP?
If yes then what is the workflow type you have defined? It must be ERM.
Whether your workflow for role approval is created in CUP?
If not then create it with the name ROLE_APPROVAL with folowing value -
Workflow type = ERM
Attributes -
Condition...................Atribute............Value
AND..........................Priority.............RE High
AND..........................Request Type...RE Role Approval
Please let me know if you have any other issues.
Regards,
Sudip.
Edited by: Sudip Saha on May 15, 2009 2:16 PM

Similar Messages

Java.sql.SQLException: Invalid precision value. Cannot be less than zero

Hi,
In my portlet application have several jsf tables which bind to several oracle tables. I have tested the portlet in pluto and tried to deploy it on liferay. However, I get an exception stating:
java.sql.SQLException: Invalid precision value. Cann
ot be less than zero
What could this exception mean? Has anyone else encountered this?
Marc
P.S. The trace is shown below:
Feb 6, 2007 12:34:56 AM org.apache.catalina.core.ApplicationDispatcher invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.RuntimeException: java.sql.SQLException: Invalid precision value. Cann
ot be less than zero
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(Cach
edRowSetDataProvider.java:343)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(Ca
chedRowSetDataProvider.java:300)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(Cache
dRowSetDataProvider.java:624)
at com.sun.rave.web.ui.component.TableRowGroup.getRowKeys(TableRowGroup.
java:806)
at com.sun.rave.web.ui.component.TableRowGroup.getFilteredRowKeys(TableR
owGroup.java:429)
at com.sun.rave.web.ui.component.TableRowGroup.getRowCount(TableRowGroup
.java:749)
at com.sun.rave.web.ui.component.Table.getRowCount(Table.java:307)
at com.sun.rave.web.ui.renderer.TableRenderer.renderTitle(TableRenderer.
java:400)
at com.sun.rave.web.ui.renderer.TableRenderer.encodeBegin(TableRenderer.
java:123)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.jav
a:683)

I've dug deeper into this problem and am able reproduce the error in the Pluto server. To reproduce this error, I modified my Oracle jdbc driver from the JSC embedded driver (smoracle.jar) to the Oracle native driver (ojdbc14.jar). Now, I am getting the exception in my Sun Application Server:
What is the difference between ojdbc14.jar and smoracle.jar that could cause this problem? What can I do so that I can fix this problem for ojdbc14.jar?
Thanks,
Marc
P.S.
The problem is with the clob column (DOR_NOTE_TX). The stack trace is:
[#|2007-02-06T09:00:53.663-0800|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=16;|
Reader executing query ps=0 SELECT DOR_NOTE_DT, DOR_NOTE_TX FROM DOR.DOR_NOTE_DATA WHERE DOR_NOTE_CD='SECURITY' AND TO_CHAR(DOR_Note_Dt, 'mm/dd/yyyy') = '02/05/2007'
No Params|#]
[#|2007-02-06T09:00:53.679-0800|WARNING|sun-appserver-pe8.2|javax.enterprise.system.stream.err|_ThreadID=16;|
java.sql.SQLException: Invalid precision value. Cannot be less than zero
Message was edited by:
marcnikko

Invalide Approver: The beneficiary cannot approve or update the task.

Hi,
How are you daling with the error: Invalide Approver: The beneficiary cannot approve or update the task ?
I have some resources that can be requested by the approver, so when he's tried that, he got the error message below. I know the message and validation make sense and is necessary.
Thanks,
Renato.

Thanks Nitesh.
I've already done that but the validations persists. As xelsysadm, I've tryed to provision a resource to myself and I've got the same error message.
OIM is executing the sql SELECT rqu.usr_key FROM rqu WHERE req_key = 74. As the usr_key is equals to the task assignee... There is no query to get the resource authorizers.
The approval task is assigned to a user group.
Any suggestion about that?
My Solution: We decided for those users, We can do a direct provisioning (OIM Administrator) or have access policies without approval :-(
Thanks.
Renato.
Edited by: Renato.Guimaraes on 02/11/2009 07:53 - Use access policies or direct provisioning

ERM - Workflow Approval Configuration in ERM and CUP

Hi Experts,
I'm in the midst of configuring the workflow approval for ERM and have some queries.
I followed the post-installation guide part 1 for ERM on the workflow configuration and have sucessfully done the following:
1. Verified that the "AE_init_append_data_RE.xml" has been uploaded in CUP with Append option
2. Verified that request type "RE_ROLE_APPROVAL" with workflow type "RE" exists
3. Verified that priority "RE_HIGH" with workflow type "RE" exists
4. Created a workflow initiator for ERM called "ROLE_APPROVAL" in CUP -> Configuration -> Workflow -> Initiator (with the said details as per the post-installation guide)
5. Created a CAD called "ERM_ROLE_APPROVER" for ERM in CUP -> Configuration -> Workflow -> Custom Approver Determinator (with the said details as per the post installation guide, filling in the necessary URI, uname/pw for admin with UME roles)
6. Created TWO stages , one stage for the role owner called "ERM_ROLE_APPROV", and one stage for the internal control owner called "ERM_ROLE_APPRO2", both with workflow type "RE" and Approver Determinator "ERM_ROLE_APPROVER" which was created in step 5 earlier.
7. Created a path for ERM Role Approval Workflow in CUP -> Configuration -> Workflow -> Path, with workflow type "RE", Number of Stages "2", Initiator "ROLE_APPROVER", Active "checked" and I put Stage 1 as "ERM_ROLE_APPROV" and stage 2 as "ERM_ROLE_APPRO2".
8. Configured the Exit Web Service (followed the details as per the post-installation guide for ERM)
As my role approval is pretty straight forward (i.e. based on business process attribute defined, with each role owner being responsible for their business process), I did the following:
1. Create approval criteria "Role Approver for Business Process FI"
2. For that criteria, I based it on attribute "Business Process"
3. I clicked on "Assign Approvers" to define who is the approver (i.e. the respective role owner responsible for Process FI)
4. I defined the condition for this criteria, Condition = AND, Attribute = Business Process, Value = FI
My queries:
1. Is the approval criteria which I created in ERM, referring to 1st stage or 2nd stage of the path in CUP?
2. I'm assuming that for query 1, the approval criteria which I created is for 1st stage (i.e. ERM_ROLE_APPROV), where can I configure the 2nd level approval for the internal control owner (i.e. ERM_ROLE_APPRO2, in the path which I defined in CUP)?
Thanks!

Hi Baldwin,
All workflow paths in CUP are triggered by an Initiator. Once the request from ERM meets "Initiator" ("ROLE_APPROVAL") requirements in CUP, the request will go to the first stage defined in the respective path. Approvers defined in each stage of the path can approve request. Once the request is approved in CUP, approval information will be sent to ERM and then the role in ERM will be moved to the next stage.
Best Regards,
Sirish Gullapalli.

-1013 Invalid valid value in Enum BoTaxTypes

I know this post is similar to a thread started on Sept 4, but it was regarding a draft document & the BoYesNo enum and the answers given in that thread do not help me.
I am trying to update a PO that I just created to change it's confirm status to no (using the BoYesNO enum). The update does not occur and I get the message "-1013 Invalid valid value in Enum BoTaxTypes"
My code looks like this:
         lretcode = vPO.Add
               If lRetCode <> 0 Then
                    'Check Error
                    oCompany.GetLastError(nErr, errMsg)
                    rtncde = -2 'SBO PO Add failed
                End If
                ' Check to see if the SBO Order total matches the WEBi Order Total
                Dim docentry As Long
                docentry = oCompany.GetNewObjectKey()
                If vPO.GetByKey(docentry) Then
                    If vPO.DocTotal <> POH.DocTotal Then
                        rtncde = +6 'SBO Order total does not match the WEBi Order Total.
                        'vPO.Comments = vPO.Comments.Trim & vbCrLf & "Totals Don't Match"
                        vPO.Confirmed = SAPbobsCOM.BoYesNoEnum.tNO
                        lRetCode = vPO.Update()
                        If lRetCode <> 0 Then
                            'Check Error
                            oCompany.GetLastError(nErr, errMsg)
                            rtncde = +5 ' po update failed
                        End If
                    End If
                End If
I have tried just changing the comments on the PO instead of changing the confirmed property and I get the same message.
The PO is added successfully and I can go into the client and clear the "approved" check box on the logistics pane and update the record successfully.
Does anyone have any ideas? - THANKS!

Hi John,
Your code works on the US demo DB with some internal build of the next patch for 2005 SP01 (which is currently going through the QA process)!
I should be published "soon", but I cannot give you an exact date.
Sorry.
Regards,
Frank

ERM Methodology - Approval

Hi,
Can ERM allow having multiple approval steps in the methodology? We need 3 different approvals placed in different stages in the process.
For testing this, I created new request types of ERM in CUP. Created new steps of approval type in ERM and added them to the methodology. Used ERM request types as initiators for the workflows and attributes for CADs.
With this ERM has to send the request for approval to different approvers as per the CADs. But ERM is asking for role owner name in the role when submitting for approval.
Does only ERM CAD of type 'web service' works to send the request for approval?
Also ERM CAD type web service is working when a single approval step exists in the methodology. ERM 5.3 SP12.
Please help.
R M

Hello ,
To create multiple approval steps ,in CUP you need ot have atleast one ERM CAD type =attribute.
For eg:
Role Owner = X
ERM CAD1 Type=webservice
ERM CAD2 Type=attribute and approver =Y
Stage1 -> CAD1
Stage2-> CAD2
Path: Stage1 -> Stage2
In the above case , the workflow will first go to role owner X , then to CAD2 approver Y.
Regards
-Ranjiv

Migration Tool - Upsert Access Profile - Invalid input value

Folks,
I am migrating AccessProfiles and I'm trying to Upsert the Admin access profiles as it's a new deployment and I'm moving code from Staging to Production. I have successfully Upserted all new AccessProfiles but get this error for the Admin AccessProfiles:
Invalid input value 'CR' for 'CustObj1 Cmpltd Activity'(SBL-ODS-50843)
I already have the correct privileges, I have full access to the entity via Role Settings and I can even manually set the Permission for Custom Object 1 - Completed Activity as Create/Read. Anyone come across this? Is this a bug?
Thanks
Oli @ Innoveer

Hi,
Any ideas?
Invalid dimension error usually appears if there is no member or invalid chars etc in a member of the dimension.
The note 1661799 says , assigning a member in a data access profile and deleting that member causes this error. I checked this case, too.

Invalid character value for cast specification using SSIS? Please assist

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft
SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Invalid character value for cast specification". There was an error with input column "INV_DT" (627) on input "OLE DB Destination Input" (332). The column status
returned was: "The value could not be converted because of a potential loss of data.". SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (332)" failed because error code 0xC0209077 occurred,
and the error row disposition on "input "OLE DB Destination Input" (332)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information
about the failure. SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (319) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (332). The identified component
returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. The attempt
to add a row to the Data Flow task buffer failed with error code 0xC0047020. SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when
the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Hi Jony2422,
From the error message, we can infer the issue is caused by the input column “INV_DT” cannot convert to the output column in OLE DB Destination.
Based on my research, the exactly cause is the data type of input column “INV_DT” can convert to the data type of corresponding output column, but the data in the input column “INV_DT” cannot convert to the data type of corresponding output column. We can
verify the issue in the Advanced Editor dialog box of OLE DB Destination.
To avoid this issue, please make sure the input column can convert to the output column in OLE DB Destination, including the all the values in the input column. For more details, please refer to Visakh's suggestions.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while attaching document to report on Portal - Invalid selection valu

Hello All,
We are running our reports on Portal and as per the business requirement the users have to create comments or attach documents to certain amounts in certain columns and once they create the comment a document icon shows up near that amount (for example there are 3 columns Budget, actual, balance then the user have to create comment for some amounts which needs explanation) they do that from context menu Documents -> Create new Comment.
Now we want those documents to be saved on Infoprovider level and not on master data for any particular object. We have activated the flag "Characteristic is document property" on related infoobjects. We have the flag to display document icon on Infoprovider active in the web template. Now when I run the report I am able to create new comments on first two columns and when the report refreshes it shows me icon near that amount but it gives me errors on third column after the report refreshes itself. Now when I go in portal KM repository where documents are stored I do see the document that I created for the third column as well so looks like the document is getting created and being stored but the issue is when it tries to display the icon on that third column.
The error I get is this:
The initial exception that caused the request to fail was:
Invalid selection value: AttributeMember
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException: Invalid selection value: AttributeMember
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLowForced(ProviderRange.java:297)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLow(ProviderRange.java:291)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.set(ProviderRange.java:469)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.SingleMember.set(SingleMember.java:125)
at com.sap.ip.bi.km.common.assignment.AssignmentMember.isContained(AssignmentMember.java:192)
Please give some inputs if anyone is facing same problem or is anyone has worked previously with this kinda of stuff.
Thanks in advance.
Kiran

Hi!
Have you solved this problem? I have the same problem after a SPS implementation (SPS 17). The message appears when we select a single value in a DP (hierarchical filter item) that filters another one, but when I select a node it doesn't.
Before the patch implementation the apliccation worked ok.
Any idea?
Thanks in advance.
Jose

Popup Key LOV, NULL and "Invalid numeric value undefined for column"

Hello.
I've created an item based on database column of NUMBER type and set the following properties:
Display As = Popup Key LOV (Displays description, returns key value)
List of values definition=select 'display_value' d, 1 r from dual
Null display value=%
Null return value=
Display Null=Yes
When I select "%" in the LOV and try to apply changes to database I get error:
ORA-20001: Error in DML: p_rowid=1781, p_alt_rowid=N1, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value undefined for column N2
Error Unable to process row of table TTT.
If I set Display As = Select List, all works fine. But I need Popup Key LOV.
Could anybody help me?
I use Application Express 2.2.1.00.04

Hi all,
I did my homework and solved this issue. First I would like to thank Patrick Wolf for the invaluable help he gives out on thread Re: Null value handling in LOVs The code presented here is just a minor edit to his code, but an essential one when dealing with Popup Key LOV items.
Here's what I did:
1. Create an Application Process.
Name: RemoveNulls
Sequence: 0
Point: On Submit: After Page Submission - Before Computations and Validations
Process Text:
BEGIN
    FOR rItem IN
      ( SELECT ITEM_NAME
          FROM APEX_APPLICATION_PAGE_ITEMS
         WHERE APPLICATION_ID   = TO_NUMBER(:APP_ID)
           AND PAGE_ID          IN (TO_NUMBER(:APP_PAGE_ID), 0)
           AND LOV_DISPLAY_NULL = 'Yes'
           AND LOV_DEFINITION   IS NOT NULL
           AND LOV_NULL_VALUE   IS NULL
    LOOP
        IF (V(rItem.ITEM_NAME) = '%null' || '%' OR V(rItem.ITEM_NAME) = 'undefined')
        THEN
            Apex_Util.set_session_state(rItem.ITEM_NAME, NULL);
        END IF;
    END LOOP;
END;Error Message: #SQLERRM#Condition: None
2. You should be able to submit a Popup Key LOV with a NULL value now.
Once again, THANKS, Patrick! You rock! I'm seriously thinking of trying ApexLib now :)
Georger

"Invalid text value" error when calling a web service from a workflow in SharePoint Online

I'm trying to create a workflow that loops through a list in SharePoint Online using a REST web service call. However, I'm having
some trouble trying to pass the authentication token as described in the following article.
http://www.fabiangwilliams.com/2013/09/03/more-on-sharepoint-2013-r...
Basically, the workflow stops right at the "Call web service" action, and the only error it tells me is the following.
Invalid text value.
A text field contains invalid data. Please check the value and try again
Has anyone had success with web service calls to SharePoint Online?
Dan Kreitz, Solutions Architect, Séafra Inc.

Hi DanPoint,
Thank you for your sharing!
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Invalid parameter value Error while Extending PoReqDistributionsVO

Hi,
My Requirement is to restrict user from enetring certain values in a field in iProcurement Page based on some condition. The attribute on which I have to place the validation is CodeCombinationId and the VO name is PoReqDistributionsVO. So, I extended the VO and generated the VORowImpl class for the extended VO. Please note that I have extended the VO just to override the setter method for the CodeCombinationId in the VORowImpl. I did not change any other thing on the VO. Once I deploy the code, I am getting the following error for the first time:
## Detail 0 ##
oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value PoReqDistributionsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
And then if I try to open the page again, it gives me multiple distribution lines. (Say for example I have only one distribution line for the requistion line and my distribution table PO_REQ_DISTRIBUTIONS_ALL has total 20 records, then all the 20 records are getting displayed in the front end.)
So, clearly after I extended the VO, the viewlink is not able to identify the viewlink.
I went through the following thread:
oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value
As suggested in the therad, I thought of copying all the view link related methods from the original VO files. But, I could not get any Viewlink related information in any of the three seeded files PoReqDistributionsVO.xml, PoReqDistributionsVOImpl.class and PoReqDistributionsVORowImpl.class. But I can find one View Link oracle.apps.icx.por.req.server.ReqLineToDistributionsVL in teh server which is linking PoRequisitionLinesVO to PoReqDistributionsVO.
Could anyone suggest me what I need to do to resolve the issue.
Edited by: 892480 on Oct 20, 2011 8:13 AM

Hi Gurus,
Any suggestion on the above issue?

Cannot add new items to a value list in AW database

I have a database which I have been using for many years. One of the fields is a value list. I just went to add another item to the list, and no matter what I do, the Create button is grayed out. I have another value list in the same database that works fine.
There are currently 170 items in the value list that is causin the problem, but I didn't think that there was a limit to the number of items that can be is a value list. (At least there is nothing in the AW technical specifications to indicate thin. I duplicated the existing database, deleted about 20 items from the list, then saved the file, and reopened it, and still cannot add new items to that value list. Does anyone know what might be causing the problem?

Oops
I read too fast.
Here is a short script which may help.
Replace the pop-up item by a text one and edit the property myList in my script to fit your needs.
Select the field to fill and run the script.
Then choose an item in the displaid list. It will be pasted in the selected field.
This trick would give you to work with a "no limit" list of items.
-- [SCRIPT DB fillFieldFromAlist ]
Assuming that
the front document is a database one
and that a text field is selected,
run the script to select an item in a list
and paste it in the field.
Yvan KOENIG, Vallauris (FRANCE)
le 19 mars 2007
property MyList : {"item 1", ¬
"item 2", ¬
"item 3", ¬
"item 4", ¬
"item 5", ¬
"item 6", ¬
"item 7", ¬
"item 8", ¬
(* edit the list to fit your needs *)
tell application "AppleWorks 6"
activate
tell document 1
set laClasse to (get class of selection)
if laClasse is not field then return (* the selection is not a field *)
set myItem to choose from list MyList
if myItem is false then return
set the clipboard to myItem's item 1
select menu item 7 of menu 3 (*
Tout sélectionner •• Select All *)
paste
end tell -- document 1
end tell -- AppleWorks
-- [/SCRIPT]
Yvan KOENIG (from FRANCE lundi 19 mars 2007 16:44:53)

Couldn't export schema because of invalid argument value and other errors.

Hello, All.
I am using an oracle 10g database, which is running on a Redhat9 linux server, to manage our lab information.
I plan to export a schema (only tables, not the real data) into a file.
First, I used the Enterprise Manager to export. I went through and complete the export job. After submitting, the system says:
There is a problem writing to the export files: ORA-39094: Parallel execution not supported in this database edition..
So I just copy the PL/SQL code which would be send to the source database and comment the set_parallel procedure.
The code is listed here:
declare
h1 NUMBER;
begin
begin
h1 := dbms_datapump.open (operation => 'EXPORT', job_mode => 'SCHEMA', job_name => 'EXPORT000468', version => 'COMPATIBLE');
end;
--begin
--dbms_datapump.set_parallel(handle => h1, degree => 1);
--end;
begin
dbms_datapump.add_file(handle => h1, filename => 'EXPDAT.LOG', directory => 'DATA_FILE_DIR', filetype => 3);
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
end;
begin
dbms_datapump.metadata_filter(handle => h1, name => 'SCHEMA_EXPR', value => 'IN(''FLOWLIMS'')');
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
end;
begin
dbms_datapump.add_file(handle => h1, filename => 'EXPDAT%U.DMP', directory => 'DATA_FILE_DIR', filetype => 1);
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
end;
begin
dbms_datapump.data_filter(handle => h1, name => 'INCLUDE_ROWS', value => 0);
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'DATA_ACCESS_METHOD', value => 'AUTOMATIC');
end;
begin
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
end;
begin
dbms_datapump.detach(handle => h1);
end;
end;
I paste the code in an SQL*Plus session and execute it. The system says:
declare
ERROR at line 1:
ORA-39001: invalid argument value
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2486
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2718
ORA-06512: at line 23
I am not very sure which part is wrong for I have exported another schema successfully using this method just now.
Any advice is highly appreciated!
Qian

Well, I will list more details about how to complete the job here.
1) Go to the Enterprise Manager, log in as FLOWLIMS (I just want to export the schema FLOWLIMS)
2)Go to the "Maitenance"
3)Under the "Utilities", select the "Export to files"
4)in the next page: Export: Export Type, select "Schemas"
5) in the next page, select the schema "FLOWLIMS"
6) in the next page, select these parameters:
Maximam Number of Threads in Export job: 1
Estimate Disk Space: Blockes
7) when I click the "Estimate Disk Space Now", it says :
Export Estimate Failed
There is a problem writing to the export files: ORA-39094: Parallel execution not supported in this database edition..
8) So I give up extimating
9) Other options:
I select "Generate Log file"
The Directory Object is the default value "DATA_FILE_DIR"
The Log File is the default value "EXPDAT.LOG"
10) the advanced options are like these:
Content: What to export from the Source Database: "Metadata only"
Export content: "include all objects"
Flashback: select "As the specified System Change Number (SCN)
SCN: just accept the default number 28901412
Query: select nothing. I need all fields of all tables.
11) in the next page, I accept the default directory object "DATA_FILE_DIR" and the default File Name "EXPDAT%U.DMP". The Maximam File Size is blank, I just leave it blank.
12) in the next page "Schedule" , I select to start the job immediatly.
13) in the next page "Review", it shows:
Export Type          Schemas
Statistics type          Estimate optimizer statistics when data is imported
Parallelism          1
Files to Export          DATA_FILE_DIR EXPDAT%U.DMP
Log File          DATA_FILE_DIR EXPDAT.LOG
and the PL/SQL is like that:
declare
h1 NUMBER;
begin
begin
h1 := dbms_datapump.open (operation => 'EXPORT', job_mode => 'SCHEMA', job_name => 'EXPORT000487', version => 'COMPATIBLE');
end;
begin
dbms_datapump.set_parallel(handle => h1, degree => 1);
end;
begin
dbms_datapump.add_file(handle => h1, filename => 'EXPDAT.LOG', directory => 'DATA_FILE_DIR', filetype => 3);
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
end;
begin
dbms_datapump.metadata_filter(handle => h1, name => 'SCHEMA_EXPR', value => 'IN(''FLOWLIMS'')');
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
end;
begin
dbms_datapump.add_file(handle => h1, filename => 'EXPDAT%U.DMP', directory => 'DATA_FILE_DIR', filetype => 1);
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
end;
begin
dbms_datapump.data_filter(handle => h1, name => 'INCLUDE_ROWS', value => 0);
end;
begin
dbms_datapump.set_parameter(handle => h1, name => 'DATA_ACCESS_METHOD', value => 'AUTOMATIC');
end;
begin
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
end;
begin
dbms_datapump.detach(handle => h1);
end;
end;
14) after I click the "submit" , it shows:
Export Submit Failed
There is a problem writing to the export files: ORA-39094: Parallel execution not supported in this database edition..
15) I copy the PL/SQL, comment this part:
--begin
--dbms_datapump.set_parallel(handle => h1, degree => 1);
--end;
I run it in an iSQL*Plus Release 10.1.0.2,
It shows:
declare
ERROR at line 1:
ORA-39001: invalid argument value
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2486
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2718
ORA-06512: at line 23
Could anybody help? Thanks a lot!
Qian

CUP Workflow - Approval on role level

Hi Community,
I have a question regarding the design/capabilities of CUP.
Scenario:
Stage 1 - based on Functional Area --> approval on request level
Stage 2 - based on organisational area of role --> approval on role level
===========================================
In stage 2, the person A receives the request with all the roles (let's say 10). Out of these 10 roles, there are 3 within his area. I understand that 7 are greyed out and therefore only approval for "his" 3 roles is required.
Here come the questions:
- If I set the stage to "mitigation enforced", a risk analysis needs to be performed. That Risk Analysis will deliver risks that derive from all 10 roles or only the 3?
- Since approval needs to be given for the other 7 roles as well by person B, the request is forwarded to person B once the person A approves. What is the order that CUP applies here? Who gets the request first? I know that the request is not split and parallel processing does not take place since I do not use different initiators... so it must be some kind of order that is applied.
Any help on this is greatly appreciated.
Mo

Mo,
The risk analysis is always performed on full CUP request. It does not care @ who is the approver at that point.
Also, role owner level approval always happens parallely. You should try this and you will see it. There is no order. Both person A and person B can approve the request at same time.
Regards,
Alpesh

ERM Cannot approve a role: Invalid Priority Value

Similar Messages

Maybe you are looking for