Error: 03-EEEE-00000

I have a new hard drive. When using the recovery disc I get a Error message 03-EEEE-0000 after following the instructions as stated. I have a a215-s7416 with Vista Basic
When I get to the command mode I see x:\source\recovery\Tools. I am lost after that.

I spent a few hours reading all these threads and banging my head against a wall getting the error below.
Double check that your swm files are actually in c:\temp and not c:\temp\zzimages
Sounds dumb but I messed up my xcopy and couldn't figure it out for the world. Hopefully someday this will help someone like me.

Similar Messages

Error: 03-EEEE-0000

My laptop has crashed will not load even in safe mode. I decided to do a full system restore to out of box condition. Unfortunately when I load the CD I get the following error: :
Error: 03-EEEE-0000
If I need a new recovery disk where do I get one.I haven't found any info on this websites about this type of error....
Solved!
Go to Solution.

Here they are. Thanks for the help! I was reciving the workaround error because the copying wasn't working correctly. these instructions should succesfully work around the 03-eeee-0000 error.
1. Boot the Recovery disc or HDD image and select System Recovery Options.
2. Follow the prompts (click next) until you get to the menu and then select the command prompt.
3. Type the following commands exactly as I type them you MUST in order for anything else to work.
first change to the C: drive by typing
c:
then make our temp directory by typing
md c:\temp
if it says there is a file or directory with that name already (which there should NOT be) simply type
erase temp
(if it is a directory [or file without an extention] it will be gone. if it is a file with an extention you will need the extention as well, to find it type
dir
this will display the contents of the C: drive you will see the file somewhere like temp.exe or temp.doc or something like that. then simply use the erase command with the file's extention.)
4. Copy the \zzimages\zzimages directory for all recovery discs to a temporary directory on the hard drive (c:\temp).
5. to do so use the following command exactly as I have typed it.
xcopy D:\zzimages\zzimages c:\temp
If it asks you to overwrite anything, you've done something wrong, tell it yes (because it won't let you do anything else) and start over.
6. insert the second disc and use the same command.
xcopy D:\zzimages\zzimages c:\temp
7. YOU MUST remember to Reinsert disc one Change to the Bin directory To do this type:
D:
this will change to the disk and then type
chdir D:\BIN
8. Now run the command
tosimagex /apply c:\temp\preinst.swm 1 c:\ /ref c:\temp\preinst*.swm
9. After is completes retart your computer, if it says "operating system not found" re-run the disc, go back to recovery options, and run start-up repair. This should suceffully reubuild your operating system.

Error 03-EEEE-0000 AND error fc040003

Hi
I have windows vista home edition 32 bit I call to toshiba soport tell me that is a software problem some body can help me happen to me exact same problem.
error 03-EEEE-0000 on my toshiba A215-s7444 after trying to do a back to factory setting of my HHD from the recovery discs that came with the laptop. I done what you guys say is the fix, that is getting to the command prompt, putting \zzimages from both discs into c:\temp, then doing the tosimage thing. I get this:
WIM File: c:\temp\preinst.swm1(0)
Dst File: c:\temp\preinst*.swm
App Name: TOSHIBA Recovery Wizard
Open WIM file failed!
.\TixRestore.cpp(52): Error FC040003

I spent a few hours reading all these threads and banging my head against a wall getting the error below.
Double check that your swm files are actually in c:\temp and not c:\temp\zzimages
Sounds dumb but I messed up my xcopy and couldn't figure it out for the world. Hopefully someday this will help someone like me.

GROUP BY Clause -SQL Devolper error 00904. 00000 - "%s: invalid identifier

I'm a real novice with SQL and I am having a problem understanding why this doesn't work. Searching the web got me to this forum, but I haven't been able to find a solution. Obviuosly I don't really understand how to use the GROUP BY clause. The SQL works fine without that clause.
As stated in the subject I am getting this error:
ORA-00904: "SORTPLAN": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Error at Line: 9 Column: 17
With this SQL statement:
SELECT START_DTM,
END_DTM,
MACHINE_SORT_PROGRAM_NAME as Sortplan,
sum(TOTAL_PIECES_FED_CNT) AS TotalFed
FROM END_OF_RUN
WHERE MODS_DATE BETWEEN '27-Jul-2011' AND '27-Jul-2011'
AND MAIL_OPERATION_NBR =919
AND SITE_ID = 81003
GROUP BY Sortplan
ORDER BY Sortplan;
TIA
Mike

Gary,
Thank you for pointing me in the right direction. There are so many choices here I had a hard time deciding which to use. :)
I tried your suggestion and still got an error. I had thought I didn't need to use aggregate functions on all of the fields. I guess that was wrong, so I changed it. Once I did that the SQL worked fine.
ORA-00979: not a GROUP BY expression
00979. 00000 - "not a GROUP BY expression"
*Cause:
*Action:
Error at Line: 2 Column: 3
SELECT MACHINE_SORT_PROGRAM_NAME AS Sortplan,
min(START_DTM),
max(END_DTM),
sum(TOTAL_PIECES_FED_CNT) AS TotalFed
FROM END_OF_RUN
WHERE MODS_DATE BETWEEN '27-Jul-2011' AND '27-Jul-2011'
AND MAIL_OPERATION_NBR =919
AND SITE_ID = 81003
GROUP BY MACHINE_SORT_PROGRAM_NAME
ORDER BY Sortplan;
Mike

Error SIZE_LIMIT_EXCEEDED (WIS 00000) in Web Intelligence BO 4.0 SP02

Hi All,
I am getting the following error in WebI on BO 4.0: SIZE_LIMIT_EXCEEDED (WIS 00000)
It is a big data set that I am fetching using a BICS connection from SAP BW BEx Query. There is no documentation available for this error.
If I remove one of the dimensions u2013 Quarter, it runs fine. But addition of Quarter or Month dimension leads to this error. There are no variables that I have defined in BEx query, though I am using 1 structure.
I cant use input controls as I need all this data and I query from this superset in my Dashboard.
Environment: BO 4.0 SP02
WAS: NW 7.3
Any ideas would be helpful. Thanks in advance.
Error Details:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: SIZE_LIMIT_EXCEEDED
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
     at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
     at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:74)
     at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
     at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
     at javax.swing.SwingWorker$1.call(SwingWorker.java:278)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at javax.swing.SwingWorker.run(SwingWorker.java:317)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.businessobjects.sdk.core.server.ServerException: SIZE_LIMIT_EXCEEDED
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
     ... 18 more

Hi,
If you BW is 7.x, then you need to be on 7.01 SP06 as a minimum supported version (for BICS - webi integration). Most reference 7.01 customers are on SP09 with 10 in the pipe.
No, there is no BOBJ setting to resolve this - it's a warning thrown by the BW to indicate that you are requesting too much data. You might even be dumping ST22 cores into BW when this error shows!
As i said before - use mandatory Filters / Variables in Bex , and Query Stripping in webi. You need to go for a more lean, targetted reporting approach, not crude data extraction.
Also Note 1593802 in the BW can help performance.
Regards,
H
p.s. for any BICS corrections on the BW side, please search component RA-BI-BICS for available corrections

Error: 03-EEEE-00000

I have tried solutions given in several of the forum threads with no success.
I have a A215-S7416 with Vista Basic. I can get to the prompt command, X:\sources\recovery\Tools>. I have tried the steps in the thread below with no success. I do have a X drive partition on my HD. I am also able to change drive by using the following command c,d, or e:,\bin. Can also change with this command c,d or e:,\temp, but nothing after that.
Re: Satellite A215 "03-EEEE-0000" Error
05-18-2009 09:42 AM
Step-by-step:
1) Copy files from recovery disks to c:\temp
2) Boot from Recovery Disk 1
3) Select Command Prompt
Location prompt shows: x:\sources\recovery\Tools
4) Try to switch to Bin in following places
* x:\sources\recovery\Tools\Bin
* x:\sources\recovery\Bin
* x:\sources\Bin
* x:\Bin
All give same error message; "The system cannot find the path"

Never solved. The laptop still works, i just can't wipe the hard drive and set it back to factory settings. I was thinking about replacing my hard drive and installing Linux.
You would think with so many people having the same problem there would be a solution posted somewhere, this is the first and last Toshiba i will ever own.

Recovery Disc Errors 03-EEEE-0000

When following the instructions to hold down "C" while turning on power, this is supposed to initiate the factory restore process. Instead, windows loads files and takes me to a screen with two options one is the Toshiba recovery wizard. When this is selected I get "ERROR has occurred 03-EEEE-0000" Whats up with this?
Have tried this procedure 10X with the same result.
PLEASE HELP
thx
bw

http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-quot-03-EEEE-0000-quot-Error/td...
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Webi error (BICSRange (WIS 00000)

Hi,
Has anyone familiar with the below error on WEBI report?. I am getting this error when i try to pull the query into query panel.
Can anyone help me on this?
Thanks
Vijay Muniraj

Hi Vijay,
Sorry I just realised I had used a link not publicly accessible, correct one is http://service.sap.com/sap/support/notes/1941472. I guess you still could find this SAP Note in Support portal.
This error occurs when SemanticLayer component is processing default answers to variables, either predefined in BEx Variable or built in a Customer Exit ABAP function. So it could be possible first time you created report that default answers did not bring this issue, and later on when working on same BEx Query you may have gotten different default answers leading to your problem.
I think you should give it a try with newer release of BOE, like BI4.1 SP04, to check if it's reproducible at all in there.
Regards,
Loic

I have a Satellite A215 error 03-EEEE-0000

My computer will not allow me to do a full system recovery. I have did every step on this thread.
The first time I followed the steps it wouldnt read the images. Next time I tried it thinking I did something wrong I am getting:
Access is Denied.
When I got to erasing the temp folder the next time its saying access is denied into c:\temp\preinst8
Please help!

Hi! The reason for the recovery discs is so you can replace the HD and restore your OS on to the new HD. The recovery hidden partition is on your fried HD and is not a option any longer. That's the reason for the recovery discs.I suggest you read your user guide and learn how to restore back to factory settings.http://support.toshiba.com/support/staticContentDetail?contentId=1731559&isFromTOCLink=false
PS I think it starts on page 57
PS I learned this from Jerry; so blame him.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Dreaded Error: 03-EEEE-0000

I have googled and read every topic in this fourm for help. I have tried suggest ideas From Techman advice. Still doesn't work...I cannot take my laptop to ASP due to fact that I am taking summer school and need my laptop to complete work....Unless this situation can be cleared up in a couple of hours..Any suggestions....

Does anyone have an inkling as to how this problem can be resolved?

EPMCSS-00000 error when running a job at Workspace

Hi Gurus,
      I am facing an error at workspace when trying to run a job with my username as following :
[2015-03-31T15:31:14.866-03:00] [EPMRAF] [ERROR] [] [oracle.EPMRAF.com.sqribe.transformer.SAConfig] [host: bihost.petrobras.com.br]
[nwaddr: 10.30.52.26] [tid: 59] [userId: sapandes] [ecid: 0000Kll6WmaAxGw_wD5EiW1Kytos0009cx,0:5]
[SRC_CLASS: com.sqribe.transformer.SAConfig] [session_id: g85V33u7-0000014c71175b4b-0000-ea1e-0a1e341a]
[subject: userJohnDoe] [SRC_METHOD: log:?] [originator_name: JF1] AUTHEN_CSSLoginFailed[[
Mar 31 15:31:14.866
Login failed for . Error Code: EPMCSS-00000. Message: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.[RESTORE_TOKEN] com.brio.one.services.authentication.CSSAuthenticationException: Login failed for . Error Code: EPMCSS-00000. Message: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.[RESTORE_TOKEN]
        at com.brio.one.common.utils.CommonIdlUtility.convert(Unknown Source)
        at com.brio.one.common.utils.CommonIdlUtility.convertCorbaException(Unknown Source)
        at com.brio.one.common.utils.CommonIdlUtility.convertCorbaException(Unknown Source)
        at com.brio.one.services.proxy.BusinessServiceProxy.convertCorbaException(Unknown Source)
        at com.brio.one.services.sessionmanager.proxy.SessionManagerProxy.createSession(Unknown Source)
        at com.brio.one.client.impl.ServerClient.createClient(Unknown Source)
        at com.brio.one.client.impl.ServerClient.createSubjectClient(Unknown Source)
        at com.sqribe.transformer.utils.ConversionRoutines.getUserContext(Unknown Source)
        at com.sqribe.transformer.RunAsyncJobFactoryCommand.execute(Unknown Source)
        at com.sqribe.transformer.SessionCommand.execute(Unknown Source)
        at com.sqribe.transformer.ClientThread.run(Unknown Source)
[AUTHEN_CSSLoginFailed]: EPMCSS-00000, , EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.[RESTORE_TOKEN]]]
      However I've got to run this same job when I log as admin user, but my username (userJohnDoe) belongs a group with admin provision in all environment.
      I've already checked out the permission to my group at all folders in Workspace and set it to "Full Control", but the error still persists....
     Does anyone could help me on that ?
      My environment is at 11.1.2.0 version in a linux box.
Regards
Thanks

Are you having issues only with a particular job or all the job? Also checking shared services security client log would give you more details.
Thx
Vivek

Content Server 6.40 with MaxDB 7.7.4 giving ODBC State 00000 error

Hi Guru,
I'm having a problem with Content Server 6.40 with MaxDB 7.7.4 under windows installation, as following from RZ20:
Date       Time     Short name                               Object name                              User Name    ALUSER16
Message
30.10.2009 12:55:26 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 12:55:37 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 12:55:49 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 12:56:01 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_DOCUME
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:31:22 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:31:45 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:51:05 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 13:51:31 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 14:03:08 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
30.10.2009 14:03:38 Requests                                 ContRep: ZCONTENT01                      AXONBASIS    HTTP_POST_FILES_
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 0"
The error is happening while executing RSCMST report. Content Server installation and configuration finished successfully. I installed for 3 server, 2 of them don't have this kind of issue. Please need your expertise on this.
Thanks in advance.
Regards,
Yan

Hi Natalia,
Thanks a lot for your suggestion. I've read the mentioned OSS last time while I was having the related issue. Now the issue had been solved by reinstall the content server. I though I did the wrong step while installing or upgrading the MaxDB.
With Best Regards,
Yan

A215-S7422 03-EEEE-0000 recovery error

Had to install a new HDD. Purchased recovery disks. Followed the "tosimagex" procedure that seem to work - 100%.
When tosimagex ends - what is the next step I should do? The new HDD has only one partition with the "temp" folder on it.

I had a bad HDD. I installed new one. I started the recovery process booting from Disk 1 of 2 .
I was able to to get to the screen that asks if you want to use "Toshiba Recovery Wizard" - clicked on next and got the following error 03-EEEE-0000. I found out that this error seems to be common and one of the solutions was to
Select System recovery options (instead of Recovery Wizard)
Select "US English"
Select Command Prompt and then
Copy the \zzimages\zzimages directory for all recovery discs to a temp directory on the hard drive (c:\temp).
Change to the Bin directory on the first recovery disc and run
"tosimagex /apply c:\temp\preinst.swm 1 c:\ /ref c:\temp\preinst*.swm" without the quotes.
tosimagex seem to work - processed 10 preinst files
I can boot up from a different Vista recovery CD and look at the C drive - it contains "windows, users, program files, etc"
But I never went thru the normal recovery process - no formatting of the HDD was done.
Since the normal recovery process will not run - I need to format and create partitions and boot area on the new HDD before I run the above tosimagex process.
Any ideas on how to do this? I can't run a cloning process since the original HDD is unreadable.
thank you

Help! Still get error message after installing new hard drive

The original problem is below and thought that it would help to include it to see the initial problem.
I went out and bought a new hard drive (500gb) and installed it in my laptop. I went to use the restore disks and I got the same exact error mentioned below. I used a set of disks that I copied from the original recovery disk and it still did the same. What is the error code and how can I fix this!!
Please help!!
I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

Error message in JDeveloper

I keep getting the following error message when trying to execute a custom package:
Error starting at line 1 in command:
call xxnwu_bud_vacant_pkg.GET_POSITIONS ('31-JUL-2009', 3001)
Error report:
SQL Error: ORA-04063: package body "APPS.XXNWU_BUD_VACANT_PKG" has errors
04063. 00000 - "%s has errors"
*Cause: Attempt to execute a stored procedure or use a view that has
errors. For stored procedures, the problem could be syntax errors
or references to other, non-existent procedures. For views,
the problem could be a reference in the view's defining query to
a non-existent table.
Can also be a table which has references to non-existent or
inaccessible types.
*Action: Fix the errors and/or create referenced objects as necessary.
I called the package and it worked fine. I then added code but forgot to insert the ; at the end of the statement and it did not compile giving me an error message. I fixed the error and recompiled the package. When I tried to call the function again I got the above mentione error. I removed the changes I made so that the function would be the way it was when it did not give me an error but it still gives me the error even though it is the same code that worked an hour ago. The package compiles without any errors but I keep getting the error above.
Does anyone have any advice??
I have tried SQL Developer 1.5.1 & 1.2.1
I have tried to drop the package and re-create it but it does not solve my problem.
Thanks
Roald
Wrong forum - please disregard
Edited by: Roald on 2009/06/29 4:37 PM
Edited by: Roald on 2009/06/29 4:38 PM

Hi,
since there is no JDeveloper 1.5.1 & 1.2.1 I assume you mean SQL Developer. In this case you are posting to the wrong forum. Please post it to the SQL Developer forum
Frank

Error: 03-EEEE-00000

Similar Messages

Maybe you are looking for