Error -10609 -- even with example that ships with LV 7.0

I'm getting error -10609 ("A transfer is already in progress for the specified resource...") at AI Control from the error out cluster of AI Start. I tried running the example called Cont Acq&Graph (buffered).vi that ships with LabVIEW 7.0, and I get the same error at the same place, so I know it's not my code. I also tried rebooting the computer and power cycling the hardware, and the error still shows up on the very first attempt to run. I have no other processes running.
I have multifunction DAQ PCI-6052E and an SCXI-1001 chassis with 2 SCXI-1100 modules and 2 SCXI-1102 modules.
Any suggestions or advice would be greatly appreciated. Thanks in advance!

Hi Iflash,
This error will sometimes occur during debugging of a data acquisition program. What happens is that when you start an operation and then terminate the program prematurely using the Abort button the process could still be running on the DAQ board.
The best way to avoid this is to reset the board. There are several ways to do this. The easiest is to run the Device Reset VI in LabVIEW. You will just need to wire up the device number and run the VI. Another option is to go into Measurement & Automation Explorer (MAX) and run the test panels on the device. It will error the first time but if you close the test panel and run it again it should be fine. Finally, in MAX 3.0, there should be a Reset button that you can access from the Devices and I
nterfaces >> DAQmx devices.
Anyway, hope that helps. Have a good day.
Ron

Similar Messages

  • My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

    My data acquisition program uses Traditional NI-DAQ in Visual C++ 6.0. When I run the program, I get error -10609 at the SCAN_Start that states
    A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the process of performing transfers, possibly with different resources.
    Why do I receive this error?

    Hi,
    TThe error -10609 can result from several situations in which the device's resources are already in use.
    A Measurement & Automation (MAX) test panel is already open.
    If you open a test panel window for your device and attempt to run your application, you can get this error. If this is the case, close the MAX test panel.
    An AI Clear function was not used at the end of the previous acquisition.
    If you do not call the AI Clear function after performing your acquisition, the resources remain open. Be sure to call this function, inputting your taskID, at the end of the acquisition.
    Multiple programs are accessing the device.
    If you have multiple VIs accessing the device, or perhaps a LabVIEW VI and another application, the resource will be taken and you will receive the error. You can only run one application accessing the specific resource (for example, analog input on channel 0) at a time
    I hope this helps...and have a Great Day!
    George

  • Even with nothing connected to my Mac Pro, I get a USB error message

    Even with nothing connected, I get this error message:
    Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
    I have restarted a few times and restarted in safe mode, and reset the PRAM and it is still there.
    Any ideas?

    Even with the mouse and keyboard unplugged, I got the same error message. It always gives me 5 warning messages in 5 separate dialog boxes. The 2 USB ports on the front of the machine are disabled, and the 3 in the back are ok.
    Profiler recognizes the "Hub in Apple Pro Keyboard" that lists the keyboard and the USB laser mouse (Logitec).
    I'll give the SMC reset a try, but I have read in another thread where it didn't work for the guy with the problem, and his final solution was a complete re-install of the system software. I'm thinking maybe an upgrade to Lion 10.7 might fix it without having to rebuild my whole computer. I'm using 10.6.8.
    -I'm still perplexed.

  • LabVIEW DSC 8.0 examples that deal with events check for valid timestamp.Why?

    Hi folks !
    There are examples that come with LabVIEW DSC 8.0 that deal with alarm events, In these examples - DSC Alarms Event Structure Support.vi contained in DSC Alarms Demo.lvproj, for instance - when an alarm event occurs, the code checks for a valid time stamp - 17:00:00.000 31/12/1975. I´m confused, can anyone help me understanding why it´s done?
    Thanks !

    Hello marc8470,
    Each Virtex 5 FPGA bank requires an external voltage reference.  The FlexRIO FPGA module provides this reference in the form of Vccoa and Vccob.  Because there are two voltage references available on the FlexRIO FPGA module, each Vcco reference is connected to 2 IO banks.  The Adapter Module Interface and Protocol chapter of the FlexRIO MDK manual has a table that indicates which GPIO banks are referenced to which Vcco reference.  The Vcco levels set in the general section of the adapter module configuration file are not used by the Xilinx compiler, but instead by the fixed FlexRIO logic to configure the external voltage references.  The IO standard constraints section of the adapter module configuration file is used during compile to configure the output drivers in the Virtex 5.  If the general VccoALevel and VccoBLevel values do not match the IO standard constraints, no error will occur during compile, but the hardware will not be configured correctly during runtime.  The logic families used by each general purpose IO (GPIO) line must match that of the Vcco levels set in the general section of the adapter module configuration file.  A mismatch in values could result to incorrect behavior or possible damage to the FlexRIO FPGA module or the adapter module. 
    In the future, please use the email address included in your NI FlexRIO Adapter Module Development Kit (MDK) User Manual to send your questions directly to the FlexRIO MDK support team.  This group has experience with specific FlexRIO MDK questions such as this one. 
    The FlexRIO MDK manual is designed to provide all of the information a hardware designer will need to create a FlexRIO adapter module.  National Instruments is always improving and working on new releases of the FlexRIO MDK.  Please feel free to use the support email address in the FlexRIO MDK manual to send me any feedback you have on the contents of the manual.
    Regards,
    Browning G
    FlexRIO R&D

  • What causes Media not present error, even with disc inserted

    I have a 2 hr  video project that I would like to place on a DVD in NTSC format.  I get an error msg "Media not present" even with DVD inserted in burner.  I have checked "Fit content to available space".  Is the 2 hr project too long to compress onto the DVD, or are there other possible causes?  I did a 1 1/2 hr project with no problems.  I have plenty of hard drive space. 

    download orders
    What version of Premiere Elements and on what computer operating system is it running?
    The problem is the disc in the burner tray not being recognized by Premiere Elements. Another frequent related issue is Burner Location: in burn dialog being empty when the Premiere Elements does not recognize the burner.
    In the problem that you have,
    a. Have you tried other brands/types of DVD discs?
    b. If you start a new project and take the new Timeline content to DVD-VIDEO on DVD disc, does the problem remain the same?
    B. Have you tried program uninstall/free ccleaner run through/reinstall with antivirus and firewall(s) disabled?
    If you are in a time crunch, you should consider burning the Timeline content to folder and then taking the VIDEO_TS Folder from that
    saved folder into a program like ImgBurn for the DVD-VIDEO on DVD production.
    Please review and consider and then we will supply you with how to details. Looking forward to your results.
    Thank you.
    ATR

  • Playing around with cfschedule, getting a time limit error - even with requesttimeout

    Hello, everyone.
    This isn't critical, I'm just playing around with the cfschedule tag.  But it's still annoying to get a time limit error, even with the requesttimeout attribute set to 10800.
    <cfschedule action="run" task="Collection_Daily_I" requesttimeout="10800">
    Less than one minute after loading the page, I get:
    The request has exceeded the allowable time limit Tag: cfhttp
    ^_^

    I tried something else here. I noticed that on the last circuit you posted you had a resistor tied from ground to the clock line in addition to the one tied back to VCC. This would be R4 in the origianl schematic. I also noticed that in this circuit I saw no double tripping of the clock signal but it did have a sloping rising edge. I am assuming this is what you are refering to as being dirty. Not a clean square wave by any means.
    I removed this extra resistor from the clock line and re-added the inverter and this seemed to clean up this slope. I do, not know what  purpose you may have had for this resistor but I believe that to be causing the sloping edge. I was incorrect about the inverter. I just know that in the original configuration I didin't get the double clocking when it was removed, but I failed to notice the sloping of the edge of the signal. Now with this new information I hope this will get it the way you want it.
    I will repost the circuit with my modifications. Let me know what you think. Just so you will know I am using asll default settings with the exception of the digital setting which is set to REAL.
    Here it is:
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day
    Attachments:
    ring_glitch possible solution_again1.ms10 ‏888 KB

  • My DVD write comes up with an error -43. Never done that before. What could be the reason. Please help

    My DVD write comes up with an error -43. Never done that before. What could be the reason. Please help

    iDVD is not involved in the process at all.
    What you want to do is create a data disk on a DVD.  That's done by inserting a blank DVD disc in the optical drive, Option+drag the files you want to backup onto the disc icon on the desktop and then drag that icon to the Trash bin in the dock which turns into the Burn feature. 
    Try that (the Option+drag and see if you can get your files to burn.
    OT

  • How do I change the apple id on the copy of Lion that shipped with my Macbook Pro?

    I've inherited a Macbook Pro that shipped with Lion installed. The app store is showing three updates for iPhoto, GarageBand, and iMovie. When I try to update them it request the password for the Apple ID for the person who set up the Macbook. These apps came with Lion which came with the Macbook. I could reload the OS but that would wipe out my configuration. How can I change the Apple ID to reflect me as the new owner so I can update the apps included with Lion? Thanks in advance for any assistance.

    If you know the seller, then maybe it can be done; according to the licensing agreement, if you sell/gift a Mac which came with Lion preinstalled, you are allowed to make a one time transfer of your software license. That would involve a call to Apple (I've not had to do this, but I've read that you need to call Apple and explain that you wish to transfer the Lion license from xxxxx to xxxxxx - don't know if it involves name/address or any other info). So, if your seller is willing to do this, and Apple re-registers the MBP in your name, you shouldn't have to do anything. You may want to check into this because it also may play a role when there is an OS update - not sure that you'll be able to get that with your different Apple ID.

  • I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be pa

    I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be paying twice for each SMS sent. Help please

    Wipe iPhone/iPad/iPod touch clean
    There are a few steps to do:
    Switch off iMessage in Settings > Messages
    Switch off FaceTime in Settings > FaceTime (iPod touch 4th Generation or later, iPhone 4 or later and iPad 2 or later)
    Delete iCloud in Settings > iCloud > Delete Account
    Finally Settings > General > Reset > Erase All Content and Settings.
    Un-register your device: https://supportprofile.apple.com
    Now you can sell/give.
    Now, you should get her a new Apple ID to sign in the options above.

  • XIF or BDoc Trigger even with errors in Business Document

    Hello Experts,
    I am stuck in an issue regarding BDoc trigger. My query is as per my understanding, if a business document like Sales order or Opportunity is in error but is saved, there is no BDoc triggered. Please correct if I am wrong.
    My actual Requirement is to trigger BDoc and thus XIF IDOC if Opporutnity is saved even with error.
    Do we have a method for this apporach.
    Please assist.
    Thx,
    Ravi

    Hey Luis,
    Thanks for your assistance.
    I assumed this functionality will haunt me. Can you suggest any workaround. The XIF IDOC will not get send also because internally they are connected to BDoc adapter itself.
    Do we have any method to trigger XIF IDOC by some logic etc.
    Thx,
    Ravi

  • I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode?

    I have an eMac that shipped with 10.4 and want to set it up so that it will run in Classic mode? However, when I launch System Restore it asks me to load the disc marked with teh sinfgle dot but then doesn't seem to run it?

    Follow up. I went to the site at the link I refered to and downloaded the recomended
    "NetBoot for Mac OS 9."       http://support.apple.com/kb/DL1192
    The netbook9.dmg needs to be mounted on a PPC Mac as it would not open on a the intel Mac I used for downloading. (Reason - legacy image should be converted.) I copied to a G4 iBook and mounted it then saved the english folder conaining the NetBook.pkg. From there follow the attached picture using Pacifist to extract the NetBook HD folder which contains an OS 9.2.2 System folder.

  • Can I wipe out newer OS on ibook G4 and restore with OS 9 or 8 or even 7 so that I can run the hundreds of Educational CDs we still have at our school? We do not need to go online or be wireless or install any newer programs.

    Can I wipe out newer OS on ibook G4 and restore with OS 9 or 8 or even 7 so that I can run the hundreds of Educational CDs we still have at our school? We do not need to go online or be wireless or install any newer programs.

    Look on the outside of the case to see if it has a port with a symbol similar to a Y, or compare its specifications against those of the first two computers on this list.
    (64597)

  • WF error: There are no workflows that have already worked with this object

    Hello all,
        I am getting the error "There are no workflows that have already worked with this object" when I go to IQS23--> enter notification number --> workflow overview. I tried to find information related to this error message but could not find anything. If anyone happen to know anything about this error, please let me know.
    Thanks.
    Mithun

    Hello,
    As the error message says, it can't find any workflows that have dealt with the instance of the object you're inquiring about.
    If you know this isn't true, or if you don't know what object this concerns, the you could try debug to see which object is being searched for.
    regards
    Rick Bakker
    Hanabi Technology

Maybe you are looking for

  • Windows won't install and can't get back to mac os

    I printed boot camp instructions.  I partitioned the disk with no problem, inserted windows 7 and it came up a black screen with blinking cursor.  I cannot get out of it and if I restart, it says to insert bootable disk.  I cannot get mac os to come

  • Can't print to PDF with CS3

    Since upgrading to CS3 my FHMX won't print to PDF, the method I used to get decent prints on my non-postscript printer. Does anyone know if something changed in Acrobat 8 to prevent this?

  • URGENT: Issue with hierarchy level keys and report drill down

    Hi, BASIC STRUCTURE: I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw

  • MBPro wont shut down

    Since the mtn lion update I am unable to shut down my laptop.  Screen goes white with spnning circle.  Have to hold the power button down in order for it to actually turn off. I've ran the check disk utility a few times with no luck...actually I take

  • Full Screen Caller ID picture

    would you please show me how to set full screen caller id photo. I do have picture taken by my iphone associated to contacts but they always show in small circle beside the caller id name. regards...