Error -1074397150 occurred at IMAQ Snap.vi
Hi.
(Sorry if my English is wrong )
I want to snap a picture - from a camera that was designed in my lab - and save it in a BMP file.
I use the "IMAQ PCI-1428" to accomplish this task and the "HL snap&save to BMP.vi".
But, as I try to run the VI I'm getting this error - "Error -1074397150 occurred at IMAQ Snap.vi", afterward I'm getting
another massage - "ERROR(DMA Timeout): The system is unable to capture all of the incoming video data....".
What should I do, to resolve this problem?
ThanX.
Hi elbit,
Here is a link to Error
Codes with NI-IMAQ. You error is
addressed there and that information may be helpful to you.
I noticed you were using the PCI-1428 framegrabber card. This card supports Camera Link cameras. In order to tell the PCI-1428 how to
communicate with the camera, the NI-IMAQ driver uses a camera file that
contains camera specific information for configuration. You will need to have a properly configured
camera file for you camera that you have created.
NI has a large number of camera files that are created and
certified to support popular industrial grade cameras. In cases where a custom camera file is needed,
NI provides the NI-Camera
File Generator as a utility for camera file creation. Keep in mind that custom camera files are not
supported by National Instruments Applications Engineers.
Good luck with your camera design. Please let us know if you have any further
questions or concerns.
Regards,
Luke H
Similar Messages
-
Error - 1074397153 occurred at IMAQ Grab Setup.vi
The sensor we are using is Goodrich SU640KTSX. I can run SUI image Analysis 3.1 software, Measurement & Automation software, and MATLAB code on an XP machine with no errors when grabbing images. We are tying to build a newer PC;
Dell T7500 with Intel xeon CPU x5650 @ 2.67GHz
Memory; 12GB
OS Win7 64-bit
Camlink card is NI PCIe-1430
Nvidia QUADRO 4000
The error we get is "Error -1074397153 occurred at IMAQ Grab Setup.vi / Cannot detect recognizable video source" when using the SUI image Analysis 3.1 software or MATLAB code. When we use the NI-IMAQ i/o 2.3.1- Measurement & Automation I can snap, grab and record without any error.
Any help on this would be great
ThanksHi,
Let us know which standard your camera is following (whether it is cameralink or ethernet).
Check this link for error info: http://digital.ni.com/public.nsf/allkb/3434173630CBC97686256F8000536593.
If at all it is cameralink camera make sure that you are following proper trigger sequence for your camera. As u are grabbing frames in MAX and not in other acquisition softwares it might be triggering issue or cables problem. -
Error -1074397038 occurred at IMAQ Start.vi for 64bit Labview 2011 SP1, Win7
Hello,
I am using a MC1362 camera from Mikrotron with a PCIe1433 framegrabber. I was using it with windows XP, 32 bit, labview 2010 SP1 32 bit, it was working perfectly fine. I just switch to windows 7 with labview 2011 SP1 64bit, and it is not working anymore with my custom routine in labview, though it works with MAX and camera file generator and I use the same camera file.
When I run my routine, I have this error message:
Error -1074397038 occurred at IMAQ Start.vi
Possible reason(s):
NI-IMAQ: The requested serial termination string was not found in the returned buffer.
Then, If I try to run the camera with MAX, it doesn't work anymore, I have to reboot the camera, and put it in the right mode with the Mikrotron control tool to obtain an image.
I have seen similar issue on a Basler camera on the forum, and it has been solved by using a camera file to set the different parameters. There is no camera file complete to set all the parameters of the camera, so I had to program them in serial to drive the camera with my Labview routine.
Could you help me to solve this issue please?
Thanks
Bests
David DulinThis forum post is already handled --> SR 1154262.
Kind regards,
Corné Westeneng
Applications Engineer
NI-Netherlands -
Error -1074395975 occurred at IMAQ AVI Read Frame DirectX has timed out readin
When i run the "Read AVI Example" on every kind of AVI file, I get the error:
Error -1074395975 occurred at IMAQ AVI Read Frame DirectX has timed out reading or writing the AVI file. When closing an AVI file, try adding an additional delay. When reading an AVI file, try reducing CPU and disk load.The forums search gives two threads talking about this error:
http://forums.ni.com/ni/board/message?board.id=170&message.id=392042&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=195832
Did you allready had a look at them? -
Error -1074395395 occurred at IMAQ Match Color Pattern after merge programs
Dear all
I have 2 separate programs that use same source image (red01a1.jpg). The first find location of color particles (color location 01.vi) and second find location of particles after threshold color image (particle location 01.vi). Both of them run good.
But when 2 programs were merged into one program (color sorter 01i.vi), that happened error . The error message is “Error -1074395395 occurred at IMAQ Match Color Pattern”. How can I fix it ?
Thanks
Solved!
Go to Solution.
Attachments:
color sorter 01i.vi 126 KB
Color -particle location.zip 86 KB
red01a1.zip 86 KBHi Xuan
Check it out the attached vi
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney
Attachments:
color sorter 01i.vi 120 KB -
Error -1074396116 occurred at IMAQ CalibrationTargetToPoints
Error -1074396116 occurred at IMAQ CalibrationTargetToPoints, So there any one to solve this problem and thank you.
there is the VI and the picture of device. SO i need to calculate the dimension and thank you
Attachments:
Calibration.vi 77 KB
Capture.PNG 27 KB -
Error 1074396024 occur at imaq usb snap.vi
hallo, ich habe labview 8.0 mit dem vision development modul und
benutze eine logitech webcam zur bilderfassung. ich habe ein vi
erstellt das im zeitraum von 1s ständig neue bilder macht und diese mit
einem referenzbild vergleicht. mein problem ist das so bei ungefähr
1000 vergleichen eines neuen bildes mit dem referenzbild der fehler
1074396024 occur at imaq usb snap.vi auftritt und ich aber nicht weiß
warum. würde mich freuen wenn mir jemand helfen kannPlease have a look at this thread which discusses similar issues in detail.
Best regards,
Jochen Klier
National Instruments Germany -
Error 1074397150 in gated IMAQ acquisition
Hi,
I have a SUI linescan camera which is read out with an NI 1427 framegrabber. I use an acquisition routine similar to LL ring acquisition. I want to gate the camera externally such that a fixed number of lines is acquired when the gate is high. So I put a TTL signal with duty cycle 50% on the gate of the camera. What should happen is that when I start grabbing the images from the camera, the buffer rate is half as high as without gating.
This is indeed the case SOMETIMES. In many cases labview doesn't start acquiring images and the acquisition 'while loop' is locked. The error is in IMAQ Extract Buffer->IMAQ Examine buffer->IMAQ img WaitForIMAQOccurence with error code 1074397150. Apparently the occurence is not made by the .dll imgSessionExamineBufferWithOccur This problem occurs even with a gating speed of >1 kHz, so it is no timeout issue I think. If I operate in a mode without gating, there is no problem and the acquisition rate is as expected.
Thanks in advance for the advise.
Sincerely,
JeroenDear Jeroen,
Thank you for your post on our discussion forum. or some reason your video signal may be corrupt. If this is the case te following example may be suitable for you; http://sine.ni.com/devzone/cda/epd/p/id/3859 .
To test that your camera is returning valid images, try running some of the high level IMAQ examples that ship with LabVIEW by going to Help >> Find Examples. In the middle folder list, browse to Hardware Input and Output, and select the IMAQ folder. Browse to the High Level folder, and try running some of the examples in this folder to verify that the camera is working properly with LabVIEW.
I hope this helps.
Best regards,
Martijn
Martijn S
Applications Engineer
NI Netherlands -
How to solve Error -1074396080 occurred at IMAQ array to color Image
Hello,
I am getting above mentioned error.
Here I have attached my screen shot of the error.
Could any one Please guide me how to solve this error.
I am using Kinesthesia kinect driver which generate U24 Bit RGB Image and I want to convert it in IMAQ Image type, But I am getting mentioned error.
But when I am not using the vision acquisition and vision assistant then every thing is fine means there is no any error which I have attached in attachment 2.
Please guide me how to solve this problem.
Thank you very much.
Solved!
Go to Solution.
Attachments:
invalid image type.png 251 KB
imaq2.png 56 KBThank you very much for quick reply.
I follow your instruction but it give me still same error.
here in attachment I have attache screen shot as well Vi so you have a look.
thank you very much once again for help and time.
Attachments:
Unbenannt.png 174 KB
kinect templet.vi 137 KB -
IError -1074395992 occurred at IMAQ ReadFile when processing batch via a vi
I have built a vi from a visoin assitant file via the automated vi creation under tools in vision assitant. The vi works fine on a single file but then the input control is changed to select an entire directory it crashed with
Error -1074395992 occurred at IMAQ ReadFile File access denied.
It reads all the files individually but won't run in the batch mode.
Attachments:
vitest.vi 164 KBHi Patrick,
Sorry it's taken so long to get back to you. The function you are trying to use doesn't actually support reading of many files at a time (batch processing), what you will have to do is extract all of the path names individually and then complete paralel processing on all of the images. (The image constant that is passed to each of the functions can only store one image at a time)
I have taken your vi and changed it slightly to allow for this functionality.
I hope this helps
AdamB
Applications Engineering Team Leader | National Instruments | UK & Ireland
Attachments:
vitest[1].vi 80 KB -
Error -1074396199 occurred at Invalid Coordinate System error is coming when i try to run the VI. i had used simple 3 things first is Orignal image than colour extract then pattren maching then coordinate system.
But it gives error during run time.
PLease solve...
Gagandeep sharmaThis could have any number of causes. Maybe the image size was changed, or the coordinate system did not carry over after an Image Copy, or Image save. More datails would be helpful to make a better determination.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions -
Error 1055 occurred at Property node
Generating the error:
"Error 1055 occurred at Property Node in ... Possible reason(s): LabVIEW object reference is invalid."
when I try to wire the IMAGE OUT output from the IMAQdx Snap vi to the value property of an externally referenced image display control.
To describe in more detail, I have a parent vi with an image display control and a child vi which has a control refnum linked to the parent vi display. In the child vi I create a value property for the refnum and try to write images to it, essentially to drive the parent display from the child vi.
The technique works elsewhere, though I can't think of what I could have done differently to generate this error?Hi Mike - looks like I may not need to. I've been working away at this and have found the original cause and something else a bit weird...
I deleted the objects from the sub-VI that was giving me errors, then cut and pasted the objects (image display refnum and value property) from a VI that was working and this solved the problem. So you might think that the issue was just some obscure configuration item, or I'd used the wrong type in my reference or something.
I found the display reference in the parent VI was not even wired to the sub VI - duh! Error between keyboard and chair. So at least the original error message made sense, but I have no idea why it actually worked after pasting in the new objects. Are these references using some sort of auto-magic? Who knows. Safer to wire up my sub-VI's properly methinks.
Sorry for wasting forum time on this one. -
Getting AB0 Run-time error "RFC_NO_AUTHORITY" occurred.
We are using ecc5 with oracle 9i and windows 2003. I am getting dumps every day at same time and error AB0 Run-time error "RFC_NO_AUTHORITY" occurred.
.Please suggest how to correct them step.
Details Page 3 Line 29 System Log: Local Analysis of sap 1
Time Ty. Nr Cl. User Tcod MNo Text
20:50:59 DIA 01 000 TMSADM R68 Perform rollback
Details
Recording at local and central time........................ 04.11.2008 20:50:59
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1Problem class....... W Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000232200
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R6 8
Variable parts...... ThIRollroll bathxxhead1240
Details Page 3 Line 30 System Log: Local Analysis of sap 1
Time Ty. Nr Cl. User Tcod MNo Text Date : 04.11.08
20:51:01 DIA 01 000 TMSADM
*AB0 Run-time error "RFC_NO_AUTHORITY*" occurred
Details
Recording at local and central time........................ 04.11.2008 20:51:01
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abrfcfun
Line................ 3686
Error text.......... ab_RfcAuthorityCheck
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. RFC_NO_AUTHORITY
Technical details
File................ 000048
Position............ 0000232560
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_RfcAuthorityCheck abrfcfun3686
20:51:01 DIA 01 000 TMSADM
AB1 > Short dump "081104 205101 sap TMSADM " generated
Details
Recording at local and central time........................ 04.11.2008 20:51:01
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... SABP
ABAP Mini dump
Date................ 20081104
Time................ 205101
Host................ sapsm
User................ TMSADM
Documentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
Technical details
File................ 000048
Position............ 0000232740
Entry type.......... s ( ABAP Runtime Error )
Message ID.......... AB 1
Variable parts...... 081104205101sapsm TMSADM
Regards,Please find the Sqlnet.ora file details.
sqlnet.ora
Filename......: sqlnet.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
NAME.DEFAULT_ZONE = WORLD
SQLNET.EXPIRE_TIME = 0
SQLNET.AUTHENTICATION_SERVICES = *(NTS){*code}TCP.NODELAY=YES
*If i changes NTS to None then there is and error*
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\soladm.SAPSM>SQLPLUS
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 7 22:14:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: /as sysdba
ERROR:
ORA-01031: insufficient privileges
Regards,
Shiva
Edited by: SHIVA on Nov 8, 2008 11:56 AM -
Error 42 occurred at ni_tagger_​lv_Write
I am trying to output an IMAQ Image to a network variable. However, when I run the VI I receive the error message "Error 42 occurred at ni_tagger_lv_Write", "Possible reason(s): LabVIEW: Generic error."
Is there some kind of setup I need to perform to get network variables working? All I did was add one to the project and configure it as a variant. As a side note, the program works fine using "single-process" variables as opposed to "network-published" variables.
edit: I am using LabVIEW 8.2.1
Message Edited by thorholiday on 06-25-2007 12:09 PMThere is a problem sending certain datatypes to network published Variant Shared Variables. This problem (Error 42) still exists as of LV 8.6.1. See my post here:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=342875
-Jason
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs -
Error-1074360293 occured at IMAQdz GetImage.vi
At first, my Labview program acquired 1-5 images and then this error message would pop:
Error-1074360293 occured at IMAQdz GetImage.vi
Possible reasons(s):
NI-IMAQ-dx: (Hex 0xBFF6901B) Time Out
After reading a bit about that error on the forum, I turned down my firewall. Now it goes much better, but the error message still appears from time to time (every 10-200 images depending of the time).
Would someone have an idea to help?
Thank you!Since you mention the firewall, I am going to assume that you are using a GigE camera.
1. If you are using a network adapter that supports Jumbo Packets, you will need to access the advanced properties tab of the adapter, and turn on Jumbo Packet support.
2. If you do not have a network adapter that supports Jumbo Packets, you will need to configure the camera in MAX to use a packet size <= 1024. 8000 is the default.
3. If you want to not turn off your firewall, and if the camera suports it, you can enable Firewall Traversal. You will need to click on "SHOW ALL ATTRIBUTES" in the Attributes tab, and look under the GeniCAM section.
4. Make sure that any devices between your PC and your camera support jumbo packets as well (routers, switches, etc.)
5. It would be best to use a CAT6 cable directly between the PC and the camera.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions
Maybe you are looking for
-
Outline Agreements - min order qty and regular vendor flag
As a part of E Source Integration with ECC we are planning to leverageusing Outline Agreement(Contract Type MK) to store Price and other Business Terms for Material / Vendor combinations. Currently we are using Purchase Information Record with minimu
-
Can I use product key from Windows 7 32bit to 64bit?
Hi, i have a Toshiba L505-10V and the original cds(2) with Windows 7 prenium 32-bit. I have downloaded windows 7 prenium 64bit from here http://www.techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/ I use the key from 32 bit bu
-
How to add a signature at the end of each post
How do you add a signature at the end of each post (if possible)? ^^right now, I just have to copy and paste that
-
Updated iphone now i can't charge or sync it!
Windows XP I updated itunes to 7.3.1, then plugged my iphone into the dock and then was prompted to install the 1.0.1 iphone update. Cool! Update goes through and everything looks fine. Quit itunes, undock the phone and go about some business. Next t
-
ASMA in SOAP Sender adapter.
Hi All, Using ASMA under SOAP sender adapter I am trying to get the username of the user . I am referring below links for the same: /people/michal.krawczyk2/blog/2009/05/26/pixi-pseudo-principal-propagation (referring this only for getting username)