Error 13562..duplicate server entries

i am getting this error
The nTDSConnection object cn=car1,cn=ntds settings,cn=mgt,cn=servers,cn=sj-site1,cn=sites,cn=configuration,dc=cxxxrr,dc=org is conflicting with cn=car1\0acnf:df6f128c-b062-4780-944d-0e9b4f222122,cn=ntds settings,cn=mgt,cn=servers,cn=sj-site1,cn=sites,cn=configuration,dc=cxxxrr,dc=org.
Using cn=car1,cn=ntds settings,cn=mgt,cn=servers,cn=sj-site1,cn=sites,cn=configuration,dc=cxxxrr,dc=org  
can someone please tell me how to delete this duplicate object.

Edit:
I just noticed that this is a duplicate case with following one:
http://social.technet.microsoft.com/Forums/en-US/c9349775-939f-476d-8554-11b21e54acf4/error-13562duplicate-server-entries?forum=winserverDS
It seems that you have already get the answer. This one with be locked. Thank you for your time!

Similar Messages

  • How to remove duplicate server entries in System Landscape

    Hi there, in our SSM 4.0 system landscape (SMSY), there are duplicate server entries (one in lowercase, the other in uppercase). How do you remove the duplicate entries, as whenever you try to delete, say, the uppercase server entry, the system tells you that it is being used in a solution etc? Thus, even though the server entries are in different cases, it still views them as the same server entry, and you cannot delete one or the other.

    Hello Bernardt,
    In smsy there is an icon "Where is used".
    I suppose you speak about a server that has been created in lowercase and again in uppercase. Until you don´t "clean" logical component, project, solution you are not going to be able to delete the entry.
    At least usually I follow this path. I don´t think there is a most "automatic" way, but who knows
    Best regards,
    Dolores

  • No Dimension Server entry was found in the EPM registry

    I have installed 11.1.2.3 on Linux 64bit.
    I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
    No Dimension Server entry was found in the EPM registry.
    Please ADVISE. Thanks.

    Avishek wrote:
    I have installed 11.1.2.3 on Linux 64bit.
    I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
    No Dimension Server entry was found in the EPM registry.
    Please ADVISE. Thanks.
    Have we not been here before and you asked similar questions?
    https://forums.oracle.com/thread/2482930
    https://forums.oracle.com/thread/2473594
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

    I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
    2 - Domain Controllers running Server 2012
    1 - Exchange Server 2013 running on Server 2012
    I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
    [Status/Consequence]
    The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_search_s() finished, return code is 0x20
    [2014/04/05:09:12:38.873]
    Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [Status/Consequence]
    The operation has not run or is not currently running. It will be run next.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_modify_s() finished, return code is 0x13
    [2014/04/05:09:12:38.905]
    Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [User Action]
    Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    [2014/04/05:09:12:38.936]
    Adprep encountered an LDAP error.
    Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
     0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
    DSID Info:
    DSID: 0x181112dd
    ldap error = 0x13
    NT BUILD: 9600
    NT BUILD: 16384
    [2014/04/05:09:12:38.967]
    Adprep was unable to update forest information.
    [Status/Consequence]
    Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
    [User Action]
    Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    Any Help would be appreciated. Thanks!

    Hi,
    did you check which servers has FSMO roles?
    You can do that via command prompt: netdom query fsmo
    For forestprep you must do that on DC which have Schema Operations marter role.
    Command
    Domain controller
    Number of times to run the command
    adprep /forestprep
    Must be run on the schema operations master for the forest.
    Once for the entire forest
    adprep /domainprep
    Must be run on the infrastructure operations master for the domain.
    Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
    Note
    Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
    http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

  • Provider-hosted Apps debug error: The remote server returned an error: (401) unauthorised

    Hi,
    Any help appreciated!!
    I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app.  I get the error on this line:  
    HttpWebResponse response = (HttpWebResponse)request.GetResponse();
    See code below
    I created a high trust development environment following the instructions provided here:
    http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
    http://msdn.microsoft.com/library/office/fp179923
    I created a provider-hosted app with the intent to:
    create a SharePoint list in the appweb
    Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint.  (No changes were made to tokenhelper.cs and sharepointcontext.cs)
    retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
    What happens:
    The app is deployed successfully to the Dev site
    The SharePoint feature is deployed and activated
    The default.aspx page of the remote web loads
    The error (see image) is returned on clicking of the button
    My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
    The code block below is a copy of the default.aspx code-behind
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using Microsoft.SharePoint.Client;
    using Microsoft.IdentityModel.S2S.Tokens;
    using System.Net;
    using System.IO;
    using System.Xml;
    using System.Data;
    using System.Xml.Linq;
    using System.Xml.XPath;
    namespace Idea.GeneratorWeb
    public partial class Default : System.Web.UI.Page
    SharePointContextToken contextToken;
    string accessToken;
    Uri sharepointUrl;
    protected void Page_PreInit(object sender, EventArgs e)
    Uri redirectUrl;
    switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
    case RedirectionStatus.Ok:
    return;
    case RedirectionStatus.ShouldRedirect:
    Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
    break;
    case RedirectionStatus.CanNotRedirect:
    Response.Write("An error occurred while processing your request.");
    Response.End();
    break;
    protected void Page_Load(object sender, EventArgs e)
    //// The following code gets the client context and Title property by using TokenHelper.
    //// To access other properties, the app may need to request permissions on the host web.
    var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
    //var spContext = new ClientContext("MySPDevInstance");
    //spContext.Credentials = new NetworkCredential("username", "password");
    //using (var clientContext = spContext.CreateUserClientContextForSPHost())
    // clientContext.Load(clientContext.Web, web => web.Title);
    // clientContext.ExecuteQuery();
    // Response.Write(clientContext.Web.Title);
    string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
    if (contextTokenString != null)
    // Get context token
    contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
    // Get access token
    sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
    accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
    // Pass the access token to the button event handler.
    Button1.CommandArgument = accessToken;
    protected void Button1_Click(object sender, EventArgs e)
    // Retrieve the access token that the Page_Load method stored
    // in the button's command argument.
    string accessToken = ((Button)sender).CommandArgument;
    if (IsPostBack)
    sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
    // REST/OData URL section
    string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
    // HTTP Request and Response construction section
    HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
    request.Method = "GET";
    request.Accept = "application/atom+xml";
    request.ContentType = "application/atom+xml;type=entry";
    request.Headers.Add("Authorization", "Bearer " + accessToken);
    HttpWebResponse response = (HttpWebResponse)request.GetResponse();
    // Response markup parsing section
    XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
    XNamespace atom = "http://www.w3.org/2005/Atom";
    XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
    XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
    List<XElement> entries = oDataXML.Descendants(atom + "entry")
    .Elements(atom + "content")
    .Elements(m + "properties")
    .ToList();
    var entryFieldValues = from entry in entries
    select new
    Character = entry.Element(d + "Title").Value,
    Actor = entry.Element(d + "Diagram").Value,
    CastingStatus = entry.Element(d + "SharingStatus").Value
    GridView1.DataSource = entryFieldValues;
    GridView1.DataBind();
    Any ideas what I might be doing wrong

    Hi ,
    Use the below code
    Public string GetAccessToken(){
    string sharePointSiteUrlHost =  Page.Request["SPHostUrl"].Tostring();
    string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
    return accessToken;
    Than initialize the ClientCOntext with the below Method
     private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
                ClientContext clientContext = new ClientContext(targetUrl);
                clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
                clientContext.FormDigestHandlingEnabled = false;
                clientContext.ExecutingWebRequest +=
                    delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
                        webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
                        webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
                            "Bearer " + accessToken;
                return clientContext;
    use this clientCOntext and it will work.
    Do not use
    SharePointContextProvider
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • HTTP error 500: Internal server error: In OAC0 tcode - CS Admin button.

    Hi,
    In our ecc system, when I go to OAC0 TCode and click the button CS Admin, it does open the page "Content Server administration" but on the bottom bar I always see error "HTTP error 500: Internal server error".
    I want to know if this is normal. We have setup archiving a few years back.
    The Archive database is Filenet system and using websphere web server.
    Thanks.

    Thanks you But ys, the backend archive server (in this case Filenet along with Websphere) is up and running all the time.
    How do I check content repository connection?? is it in OAC0? If yes then we did it and it works fine.
    We have also resent the certificate from OAC0 and it got imported at their end too. Yes our SAP system got refreshed but after that we created new entry in strustsso2 and exchanged the certificate. But till date I have always seen HTTP 500 on the "Content Server administration", enen on production server. Not sure if this is normal.
    Apart from this, on non production systems we are unable to perform any kind of archiving too. We get HTTP500 whenever we run a Store Job.
    Regards,

  • Html error while downloading table entries to Excel.

    Hi,
    I am getting an error while downloading table entries from webdynpro to excel. After some entries below error script comes and  this is not comming all the times.
    Is this because of large size?Can anyone please suggest me on this?
    <u>Here is the dump:</u>
    [code]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>                                   
    <head>                                   
         <title>Error Report</title>                              
    <style>                                   
    td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}                                   
    A:link                                    
    A:visited                                    
    A:active                                    
    </style>                                   
    </head>                                   
    <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">                                   
    <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">                                   
    <tr bgcolor="#FFFFFF">     
        <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  500   Internal Server Error</b></font></td>     
    </tr>     
    <tr bgcolor="#3F73A3">     
        <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>     
        <td height="23"><img width=1 height=1 border=0 alt=""></td>     
        <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.40 </b></font></td>     
    </tr>     
    <tr bgcolor="#9DCDFD">     
        <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>     
    </tr>     
    </table>     
    <br><br><br><br><br><br>     
    <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  Application error occurs during processing the request.</b></font></p>     
    <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> Details:</b></td><td valign="top"><PRE><pre>com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The stream has already been committed.     
         at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:792)
         at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:780)
         at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:768)
         at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.responseCachedWebResource(WebDynproExchangeHandler.java:98)
         at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.doExchange(WebDynproExchangeHandler.java:189)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doExchangeProcessing(DispatcherServlet.java:164)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:119)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    </pre></PRE></font></td></tr></table></font></p>     
    </body>     
    </html>[/code]
    Thanks,
    Sanjeev

    Hallo Sanjeev,
    How do you exactly "download the table entries from Web Dynpro to Excel?"
    I wrote a new <b>Wiki Code Tutorial </b>which demonstrates how to download an Excel file from a Web Dynpro <i>Table </i>UI element <b>on-demand</b>. In this scenario the resource gets re-created on every request. The solution is based on re-initializing the context with a new  0-byte resource object within the calculated context attribute getter method.
    See <a href="https://wiki.sdn.sap.com/wiki/display/Snippets/ExportingTableDatainWebDynproJava-SAPNetWeaver04s">Exporting Table Data in Web Dynpro Java - SAP NetWeaver 04s</a>
    Regards, Bertram

  • Error while reading file entries from the database

    Hi there,
    We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
    "Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
    Any clue? Any suggestion on how we can recover from that?
    Thanks a whole lot,
    Dom
    Server log:
    #1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
    #1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
    #1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
    #1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
    #1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
    #1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
    #1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#

    Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.

  • Timeout causes error 500 (internal server error)

    Hello,
    I am running Weblogic server 8.1.
    Running a web application works ok initially, but -
    After initially viewing any page, if no user activity happens for about 30 minutes, and then user clicks any link, the following error is shown:
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    My guess is there is some timeout that is causing this.
    I searched the code, server settings and documentation for any kind of "timeout" value.
    No values were found in the code or server settings.
    My web.xml or weblogic.xml did not have any entries for timeout.
    I added a value for "session-timeout" in web.xml, which I made 65 minutes in web.xml, but still no change.
    Still times out in 30 minutes.
    Does anyone know what the issue could be?
    Any help is greatly appreciated.
    Thanks in advance for your help.
    Edited by: 833070 on Feb 2, 2011 7:23 AM

    Faisal,
    Thanks,
    I looked but there is no Exception / error seen in the logs.
    I looked at mydomain.log, myserver.log, access.log and my own application logs.
    None of them show an error.
    The only error seen is by the user on the browser (after 30 minutes idle time), which I have mentioned earlier...

  • Check duplicate data entry in multi record block,which is a mandatory field

    Dear all,
    I have a situation where i have to check duplicate data entry(on a particular field,which is a mandatory field,i.e. it cannot be skipped by user without entering value) while data key-in in a Multi Record block.
    As for reference I have used a logic,such as
    1>In a When-Validate-Record trigger of that block I am assigning the value of that current item in Table type variable(collection type)
    as this trigger fire every time as soon as i leave that record,so its assigning the value of that current time.And this process continues
    then
    2>In a When-Validate-Item trigger of that corresponding item(i.e. the trigger is at item level) has been written,where it compares the value of that current item and the value stored in Table type variable(collection type) of When-Validate-Record trigger.If the current item value is matched with any value stored in Table type variable I am showing a message of ('Duplicate Record') following by raise_form_trigger failure
    This code is working fine for checking duplicate value of that multi record field
    The problem is that,if user enter the value in that field,and then goes to next field,enter value to that field and then press 'Enter Query 'icon,the bolth Validate trigger fires.As result first when-validate record fires,which stores that value,and then when-validate-item fires,as a result it shows duplicate record message
    Please give me a meaningful logic or code for solving this problem
    Any other logic to solve this problem is also welcome

    @Ammad Ahmed
    first of all thanks .your logic worked,but still i have some little bit of problem,
    now the requirement is a master detail form where both master and detail is multirecord ,where detail cannot have duplicate record,
    such as..........
    MASTER:--
    A code
    A1
    A2
    DETAIL:--
    D code
    d1
    d2 <-valid as for master A1 , detail d1 ,d2 are not duplicate
    d2 <--invalid as as for master A1 , detail d2 ,d2 are duplicate
    validation rule:  A Code –D Code combination is unique. The system will stop users from entering duplicate D Code for a A Code. Appropriate error message will be displayed.*
    actually i am facing a typical problem,the same logic i have been applied in detail section ,its working fine when i am inserting new records.problem starts when i query,after query in ' a ' field say 2 records (i.e. which has been earlier saved) has been pasted,now if i insert a new record with the value exactly same with the already present value in the screen(i.e. value populated after query) its not showing duplicate.................could u tell me the reason?and help me out...............its urgent plzzzzzzzzz
    Edited by: sushovan on Nov 22, 2010 4:34 AM
    Edited by: sushovan on Nov 22, 2010 4:36 AM
    Edited by: sushovan on Nov 22, 2010 8:58 AM

  • Urgent !!!! Duplicate invoice entry

    Hello Experts,
    I have a meeting tomorrow with business people to discuss the problems of "Double Entry Invoice" and how to control that.
    Here is what I was told by Business Unit head:
    I have observed that we sometimes make duplicate payments, usually through the AP check payments then again via wire transfer, but also could be duplicate invoice entry.  I need to understand how this could happen and what we can be done to prevent (or minimize) the possibility of this occurring.  Are there any SAP configuration settings we can use that we are not currently using?
    I joined very recently in this project and didnt know much about the configuration settings of the System.
    How should I deal this situation? Please advise me on what points should I prepare.
    Any help in this regard is highly appreciated and duly rewarded.
    Regards,
    Sriram

    HI Sriram,
    In vendor master data you need to check " check double invoice"
    In the vendor master, set whether the system should check for duplicate invoices.
    The check for duplication of invoice entry aims to avoid invoices being accidentally created and paid twice.
    When you enter invoices, the system first checks whether the accounting documents in Financial Accounting and then documents in Logistics Invoice Verification – only those that contain errors or that were entered for verification in the background – match up according to the following criteria.
    Vendor
    Currency
    Company code
    Gross invoice amount
    Reference document number
    Invoice doc. date
    The system only checks invoices. It does not check credit memos or subsequent credits/debits. When you create a duplicate invoice, the system displays a warning or error message, depending on your settings in Customizing.
    Exception
    For the Argentina country version and for documents in Financial Accounting, both invoices and credit memos are checked for duplicate entries.
    If a previously created document is canceled and then created again, the system does not display a message.
    Integration with Financial Accounting
    One of the following checks is performed in Financial Accounting, depending on the entry in the Reference field:
    If you enter a reference document number in the current invoice or credit memo, then the system checks for previously posted invoices or credit memos in Financial Accounting that match the following attributes:
    Company code
    Vendor
    Currency
    Document date
    Reference document number
    If you do not enter a reference document number in the current invoice or credit memo, then the system checks for previously posted invoices or credit memos in Financial Accounting that match the following attributes:
    Company code
    Vendor
    Currency
    Document date
    Amount in document currency
    Your system settings determine whether the system sends a warning or error message when it finds an invoice or a credit memo that matches all the relevant attributes.
    Prerequisites
    In the vendor master record, select the Chk double inv. (check for duplicate invoice) on the Payments in Accounting screen.
    The system only checks for duplicate invoices in Logistics Invoice Verification if you enter the reference document number when entering the invoice.
    In the Implementation Guide (IMG) for Logistics Invoice Verification, you can define that the following characteristics are not checked:
    (Logistics Invoice Verification ® Incoming Invoice ® Set Check for Duplicate Invoices)
    Reference document number
    Invoice date
    Company code
    The result of this is that the system is more likely to find a duplicate invoice, as it checks fewer characteristics.
    Note, that if you deselect the Company Code field this can have a negative effect on system performance. This is because the system then checks numerous documents from existing company codes.
    Features
    During the check for duplicate invoices, the system compares the following entered attributes in the standard system in Logistics Invoice Verification:
    Reference document number
    Invoice date
    Gross invoice amount
    Currency
    Vendor
    Company code
    Best Regards
    Ashish Jain

  • Mail: Proper way to adjust IMAP/SMTP mail server entries?

    Please forgive, but I am still on 10.4 (Tiger) with an iCloud mail account. I believe this is still a widely applicable and helpful question!
    IMAP (Incoming Mail Server):
         MINE IS STILL:      mail.me.com  (Currently still working fine)
         Advised/required:     imap.mail.me.com
    SMTP (Outgoing mail server):
         MINE IS STILL:          smtp.me.com  (Currently still working fine)
         Advised/required:      smtp.mail.me.com
    QUESTION 1: To have the server entries set properly, can I simply make textual changes in the Incoming/Outgoing server name fields for my IMAP iCloud mail account (via insert of word "mail" in server names; change is not shown here)...
    ...or should one DELETE IMAP ACCOUNT (as I have commonly read!) and recreate with all new correct settings? If it is advisable to Delete the account, why wouldn't just making the quick server name adjustments be sufficient?
    Also, I need some fears assuaged:
    - "Deleting an IMAP mail account" in Mail has no risk/danger of losing/deleting all of your Sent and Received Inbox/Sentbox contents, correct? When you recreate an Account, all of your mail held on server is still fully safe and accessible, yes?
    ISSUE TWO:
    I like to use both my "me.com" and "mac.com" email addresses.
    Under "Edit (Outgoing) Server List," I still have a secondary older entry "smtp.mac.com" listed.
    QUESTION 2: Is the following statement of my understanding accurate?
    "Deletion of the smtp.mac.com outgoing server is completely acceptable and would not prohibit sending of email under mac.com email address because the "mac.com" email address is an alias for the me.com address and ALL mail (whether sent with mac.com or me.com email address) goes out through the ME.COM server."
    Is that correct. If not, kindly advise!
    I really appreciate the help.
    I am not a beginning Mac user and find that the complete configuration intricacies of Apple Mail (I know that's the old name) are one thing that users are never really guided to master and comprehend.
    Many thanks in advance!
    Bill from Maryland

    These are the settings recomended by Apple.
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead.

  • Kernel Upgrade Message server entry problem

    Hallo,
    My system
    kernel release                700
    kernel make variant           700_REL
    compiled on                   HP-UX B.11.23 U ia64
    patch number                  114
    We patched the syste to 221. There are two instances on this system.  But the error comes below - system does not comes up.
    dev_disp
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    **ROR => platform patchno is 114 114 [dpxxdisp.c   18253]
    ERROR => but my patchno   is 221 [dpxxdisp.c   18254]
    DP_FATAL_ERROR => Release inconsistent with running system
    DISPATCHER EMERGENCY SHUTDOWN ***
    I have seen note number 409839. I dont understand the solution.
    Do I delete the message server entry in RZ03 -> Utilities-> diagnosis-> message server status area pertaining Rel_patch_number ?
    Where do I take the message server entry from ?
    Please help if you had similar problems and solved them.

    I found something in the AI
    actually the exe directory is not linked to the kernel. This looks unusual. As exe here should be linked to the /sapmnt/SID/exe
    s96pnp20:pcpadm 43> pwd
    /usr/sap/PCP/D01
    s96pnp20:pcpadm 44> ls -ltr
    total 22
    drwxr-xr-x   7 pcpadm     sapsys          96 Jun  1  2008 igs
    drwxr-xr-x   2 pcpadm     sapsys          96 Jun  1  2008 sec
    drwxr-xr-x   2 pcpadm     sapsys          96 Jun  1  2008 log
    drwxr-xr-x   5 pcpadm     sapsys        4096 Jul  3 20:38 exe
    drwxr-xr-x   4 pcpadm     sapsys        2048 Sep 30 10:00 data
    drwxr-xr-x   2 pcpadm     sapsys        5120 Sep 30 10:14 work

  • Java.io.IOException: Error writing to server after installing SP17

    After installing SP17 in production, we are seeing message in AE failing with com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: Error writing to server.
    The messages don't make it to IS and are stuck in AE.
    We've checked pipeline url / sm59 entry for INTEGRATION_DIRECTORY_HMI using user - XIISUSER, we did a full cache refresh.
    They all appear to be set correctly.
    We'll take any ideas and suggestions.
    Thank you.

    Yes...we have been working all night on this. The FM did create an entry but it does no look like its recognising.
    This is what we see in the Adapter messaging tool.
    2006-09-18 13:28:24 Error Returning synchronous error notification to calling application: Received HTTP response code 401 : Unauthorized.
    2006-09-18 13:28:24 Error Transmitting the message using connection http://host:8176/sap/xi/engine?type=entry failed, due to: Received HTTP response code 401 : Unauthorized.
    2006-09-18 13:28:24 Error The message status set to FAIL.
    2006-09-18 13:28:24 Error Returning to application. Exception: Received HTTP response code 401 : Unauthorized
    Any help?

  • Error in Creating Server Pool

    while creating a server pool , it getting starting creation of severpool and got this error "During creating server pool (OraServerPool), cluster setup failed: (OVM-1011 OVM Manager communication with 192.168.2.21 for operation HA Setup for Oracle VM Agent 2.2.0 failed:
    errcode=00000, errmsg=Unexpected error: <Exception: ha_check_hostname_ip
    failed:<Exception: check srv('192.168.2.21') hostname/IP failed! => <Exception: Invalid hostname/IP configuration: hostname=OracleVM;ip=127.0.0.1>
    its not a HA server, we didnt enable the HA
    Pls helo me

    You do not need to setup or configure a DNS server in a private LAN, unless you want to be reachable beyond your local home network. The local hosts file provides the same functions in terms of mapping a TCP/IP number to a name and vice versa like a DNS server. It is not designed to maintain large corporate networks with dynamic IP addresses, but easy to maintain in your small home network. Your DSL modem is most likely the a gateway for all internet traffic outside your private LAN and also re-routing DNS requests for public host resolving. Unless you explicitly configured an authoritative internet domain name for your home LAN on your DSL modem your computers may not have been assigned internet host and domainname via DHCP.
    To analyze your current situation you can use the following commands:
    # hostname
    If this shows something like "localhost.local" this means you do not have given your computer a hostname and domainname and it is using defaults.
    # domainname
    It will be "blank" if not configured.
    # ping localhost.local
    This should show resolve in your real IP address like 192.168.2.1, but will show nothing if DNS or /etc/hosts is not configured properly.
    # ping localhost
    This should result in 127.0.0.1, which is a looback interface of the TCP/IP stack.
    You need to make appropriate entries in your /etc/hosts file if you cannot use a DNS server.
    192.168.2.1 localhost.local ovmserver
    127.0.0.1 localhost
    If this does not resolve the issue you can try the below. This is not a very clean configuration, but could work.
    192.168.2.1 localhost.local ovmserver localhost
    127.0.0.1 localhost
    If you have any entry like:
    127.0.0.1 ovmserver - this is wrong and needs to be removed.
    Be aware of possible network address translation if you use VMware, in which case you need to configure your VMware network interface accordingly.
    BTW: Error status on newly created pool
    Edited by: Markus Waldorf on Jul 26, 2010 5:53 PM

Maybe you are looking for