Error 7 in Invoke Node in 'Dist Build App from LLB.vi'

I am encountering this error when trying to build an application. The error occurs while the builder is indicating that the application is actually being built (after files have been copied to the application). I am positive that all of my file paths are correct. I also have successfully mass compiled all of the VIs in the application. Is there something I'm overlooking?
The really funny thing is, using this same .bld script, I successfully built the application on another computer (running LV 7.0, just like this one).
My ideal approach to solving this problem would be to get into 'Dist Build App from LLB.vi' (or it's caller) and take a look at exactly which VI in my build is tripping up the build process.
Does anyone know the path for the LLB where I can find these VIs? And will I be able to access their block diagrams?
Thanks,
Nick
"You keep using that word. I do not think it means what you think it means." - Inigo Montoya

I just fixed the problem. When I said I was positive that all of the paths were correct, I was talking about paths to the LLBs in my build. However, somehow the LabVIEW system paths got changed. I don't recall ever doing anything to change LV's seach paths. I reset to the default values in Tools>>Options... and everything seems to work now. Sorry for the trouble, and thanks for the quick response, A.
-Nick
"You keep using that word. I do not think it means what you think it means." - Inigo Montoya

Similar Messages

Error 6 occurred at invoke node in dist build app

Error 6 occurred at Invoke Node in Dist Build App from LLB.vi->Dist Build App Image.vi->Build Application.vi
Possible reasons:
LabView: Generic file I/O error
or
NI-488: I/O operation aborted
Version 6.0.2

I noticed that you updated your system to 6.0.2. A couple things to check on that may remedy the problem.
1)Did you install the application builder after upgrading your system to 6.0.2? You will want to install the application builder 6.0 first, and then add the 6.0.2 update to the whole system.
2)Have you mass compiled all of your VIs since the upgrade? You will want to make sure that all of your VIs are in 6.0.2 format before trying to build them into an executable.
Matt Kisler
Applications Engineer
National Instruments

Error 6 at Invoke Node in Dist Send Result File to RT.vi-- Build Applicaiton.vi

I am using cFP 2000 RT in my application. When I build exe and download the application to the cFP 2000 RT, I get "Error 6 occured in Invoke Node in Dist Send Result File To RT.vi--> Build Application.vi"
The steps followed.
1. In the LabVIEW 7.0 Main Panel, Select the execution target as RT Target.
2. Tools --> Build Application or Shared Library. In the Target Tab the destination directory is selected as \\xxx.xxx.xxx.xxx\c\ni-rt\startup automatically.
3. In the SOurce file tab, select the Top level VI.
4. Press Build to make the executable of the application. The application is built and at the end the error message is poped up. (see the attached file)
Software Configuratio
n:
1. LabVIEW 7.0
2. Field Point 4.0
3. LabVIEW RT 7.0
Help me solve this problem. Thanks in advance.
Attachments:
Error_Message_and_RT_Info.bmp ‏313 KB

This is most likely coming from the specific file it mentions in the error, Dist Send Result File To RT.vi. The error 6 means the file can't be found. One thing to try first is to add this VI as a Dynamic VI in Application Builder. Another option is to change the path that this VI is invoked from, or is not called by an Invoke Node at all.
I hope this helps, feel free to contact support if the problem continues.
Regards,
Robert Jackson
Application Engineer

Error 7 occurred at Invoke Node in Dist read linkages.vi- Dist Cmp Settings to Disk Hier.vi- Build Application.vi

Error 7 occurred at Invoke Node in Dist read linkages.vi->Dist Cmp Settings to Disk Hier.vi->Build Application.vi????
Hi I do not understand how to resolve this nagging problem.
I run the program in the development time and it all goes smoothly.
However when i wanted to build the program. I often run into this problem.
How to resolve it?
Clement

Hey Clement,
Which version of LabVIEW are you using? There some knowledgebases out there that address the issue. Click here for the first KB or here for the second one. Hopefully these would help.
Regards,
Chetan K
Application Engineer
National Instruments

Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi- Dist Build LLB Image.vi- Dist Build App Image.vi- Build Application.vi

When trying to build an application using labview 7.1 and windows XP, I get the error
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
I've tried the crtl-shift-run as well as a mass compile and I still get the error.
Any ideas?
Thanks,
Mike

Hopefully this thread, or this KB article might help.
It seems like this could come from a lot of things, but there's suggestions in those which might lead you in the right direction
Message Edited by Day on 09-22-2006 02:07 PM

Call failed. Error: An unexpected 'PrimitiveValue' node was found when reading from the JSON reader. A 'StartObject' node was expected.

Hi All,
I am trying to add a new task to a Tasks list called CATasks. The list was created via Visual Studio “Add > New Item > List” process and not by custom code. The code I am using to add a task is shown below.
What I have noticed is if I use my code to add a Task to a Task List created by Visual studio “Add > New Item > List” process, I get an error. Error message when adding an item:
Call failed. Error: An unexpected 'PrimitiveValue' node was found when reading from the JSON reader. A 'StartObject' node was expected.
But if I create the same list using custom code I don't get an error.
Am I missing something in my custom code or is this a bug?
I hope you can help.
CEStar
App.js Code:
function createItem() {
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/Web/?$select=Title,CurrentUser/Id&$expand=CurrentUser/Id",
type: "GET",
dataType: "json",
headers: {
Accept: "application/json;odata=verbose"
call.done(function (data, textStatus, jqXHR) {
var userId = data.d.CurrentUser.Id;
addItem(userId);
call.fail(function (jqXHR, textStatus, errorThrown) {
failHandler(jqXHR, textStatus, errorThrown);
function addItem(userId) {
var due =
new Date();
due.setDate(due.getDate() + 7);
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/Web/Lists/getByTitle('CATasks')/Items",
type: "POST",
data: JSON.stringify({
"__metadata": { type:
"SP.Data.CATasksListItem" },
Title: "Sample Task",
AssignedToId: userId,
DueDate: due
headers: {
Accept: "application/json;odata=verbose",
"Content-Type":
"application/json;odata=verbose",
"X-RequestDigest": jQuery("#__REQUESTDIGEST").val()
call.done(function (data, textStatus, jqXHR) {
var div = jQuery("#message");
div.text("Item added");
call.fail(function (jqXHR, textStatus, errorThrown) {
failHandler(jqXHR, textStatus, errorThrown);
function failHandler(jqXHR, textStatus, errorThrown) {
var response = JSON.parse(jqXHR.responseText);
var message = response ? response.error.message.value : textStatus;
alert("Call failed. Error: " + message);
Create List Custom Code:
function createList() {
var call = jQuery.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/Web/Lists",
type: "POST",
data: JSON.stringify({
"__metadata": { type:
"SP.List" },
BaseTemplate: SP.ListTemplateType.tasks,
Title: "CATasks"
headers: {
Accept: "application/json;odata=verbose",
"Content-Type":
"application/json;odata=verbose",
"X-RequestDigest": jQuery("#__REQUESTDIGEST").val()
call.done(function (data, textStatus, jqXHR) {
var message = jQuery("#message");
message.text("List added");
call.fail(function (jqXHR, textStatus, errorThrown) {
var response = JSON.parse(jqXHR.responseText);
var message = response ? response.error.message.value : textStatus;
alert("Call failed. Error: " + message);

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Error 1069 on Invoke Node

Hello all,
I'm trying to build an application we have. In one of the sub-vi's there's a call to invoke node to start another vi. When I run the program from the VI this works fine as it should. When I build my executable and have my .llb for the executable, the program gets to this point and I get the above error, Error 1069: The sub vi is not executable. I know there's no executable for this and the spawn vi that calls it is in the llb. Any ideas as to why it will work as a vi but not as an exe? Thanks for any help.
Gary

Aaron G wrote:
Gary,
A common reason for error 1069 is because you are attempting to launch the code from the executable environment and not a develoment environment. When it attempts to launch the VI, it may not find all of the subVIs, causing the VI to be reported as non-executable. One way around this is to open the VI that is dynamically launched, go to File>>Save With Options and choose Application Distribution. This will allow you to create an Application Distribution LLB file. If your executable launches the version of the VI that is in the Application Distribution LLB, it will work. As a word of caution, when saving files as an Application Distribution, the block diagrams are removed from the VIs, DO NOT OVERWRITE your existing VIs. You will never be able to edit them again if you do this. Alternatively, when you build the application, make sure that the VI is included as a dynamically launched VI in the list of included files.
Regards,
Aaron
Aaron, thanks for the reply. I am saving with options and doing the Application Distribution. I'm also getting error 1003 but it's still saying the possible cause may be that the vi is not executable. The vi's that the invoke fails on are not included in the llb but according to the previous version of the software (in LV 6.1) it's not needed. (I checked the old llb file and the options in application builder.) I have the spawn vi which calls the invoke in the llb. The spawn takes a path, creates a reference and then does the invoke on this path. The vi's themselves are not in the llb. Will these need to be moved in? And if so will the paths need to be changed?

Error 10000 at invoke node

There is an Error 10000 happened at invoke node in one of my subvi. Please see attached snapshot of the error message.
This program(VI) has run for one month, and yesterday this error happened first time. After I stopped the VI, and ran it again, there was no error anymore.
Can anybody tell me possible causes? Thanks.
WT
LV2013SP1
Attachments:
Invoke Node error at CallSubVI_Do.PNG ‏36 KB
Call_Subvi_Do(variant).vi ‏20 KB

weitong wrote:
Thanks. But, I didn't get what you said.
I am using "Call_Subvi_Do(variant).vi " to open and run another VI. Which one I should check the state of by using the Property node "Execution>State>Idle", "Call_Subvi_Do(variant).vi" OR the VI called by Call_Subvi_Do(variant).vi? By the way, the error is promted happening at the Invoke node in "Call_Subvi_Do(variant).vi" .
Yes on the top its happens in the sub VI but when you debugg the sub VI you may find that error occuring at the onvoke node "Run VI". Check the attached VI with added check for the state of the VI.
The best solution is the one you find it by yourself
Attachments:
Call_Subvi_Do(variant)_Anand.vi ‏21 KB

Why do I get the 'PowerPC code' error when trying to launch an Intel-based app from a CD?

When trying to launch a Flash-based app from a CD on my Mac Book Pro, I get the "PowerPC apps are no longer supported" error. Yet the app is not built with PowerPC code.
This also happened with Microsoft Office programs soon after I upgraded to OSX Lion, but someone was able to solve that for me.

It's just a free disc from a photo magazine, but the app runs fine on a Mac Pro running 10.7.3. Could it be hardware related?
I have actually asked this on behalf of a reader (I work for the company that makes the magazine) who is experiencing this problem, I just can't find any reason why the error would display in these circumstances. I apologise if this is against the community's usual practise - I just want to sort this guy out!
The app on the disc is compiled using MDM Zinc, but like I said it runs a-OK on Lion everywhere else.
Any help would be gratefully received and appreciated!

Error 6 occurred at Invoke Node in Dist Cmp Settings to Disk Hier.vi- Build Application.vi

My application runs fine under the LV 6.1 Professional Development System. When I attempt to add, in the application builder's source files tab, a dynamic vi that makes scope card and gpib calls, I get this error.
NI Scope and NI-488.2 ver 1.70 are installed.
Any suggestions?

I'm not sure if this will help, but you might take at look at these and give the ideas a try:
http://digital.ni.com/public.nsf/websearch/229402206118211186256752005C1E40?OpenDocument
http://digital.ni.com/public.nsf/websearch/862567530005F09C86256745006E4494?OpenDocument

Error 1 at Invoke Node

This VI was always working perfectly and no changes have been made to it but yet i am now seeing an error.
Any ideas?
Attachments:
TBIMon_EmailAsynchronus.vi ‏32 KB

Misspelling would cause you problems.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

"An unknown error has occurred" iphone 4 when downloading any app from app store

Every time I try to download any app (paid or free) from the appstore from my Iphone 4 I get this same error. Any help would be appreciated. I've tried updating my credit card info, as well as changing my apple ID password - neither had any effect. This is the first time I've tried to download an app after installing the latest iOS though. Anyone else having this same issue? or know of other things to try? Thanks in advance.

Thank you so much.
I renewed my credit card details at Apple and it caused the error message.
It was easy to understand what happened/ what to do by reading your message.
I hope that Apple make the message more friendly.
Appreciated

Error message when trying to install free iPad apps from Canadian App Store

I have an appleid for use in the Canadian App Store. I browse to the Canadian store, select a free app to install on my iPad, and get an arror message indicating that I cant use my appleid in the US store. I cant find any place where the setting might be cached. Any suggestions?

bbao wrote:
Nokia should issue a new certificate for this popular app.
Accenture's remit for continuing support for Symbian is probably quite restricted, as such issues starting to affect S60 3rd Ed. FP1 and FP2 devices increasingly now!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Linux AppBldr Error 7 Invoke Node

* LabVIEW 6.02 FDS Linux S/N G12X17332
* AppBldr 6 Linux S/N J12X64523
My SSP subscription on this software has expired.
The products were installed on Linux Mandrake 8.2 using the provided National Instruments RPM method. A query of the rpm database shows that the following
versions are installed:
labview-help-6i-1
labview-examples-6i-1
labview-ref-6i-1
labview-desktop-6i-1
labview-rte-6.0.2-1
labview-pro-update-6.0.2-1
labview-app-6i-1
labview-vxi-6i-1
labview-update-6.0.2-1
nivisa-2.5-1
If I attempt to build an application from a workable VI (that resided on the local disk and not in memory), the build process proceeds until a dialog box is
displayed, stating "Error 7 occurred at Invoke Node in Dist Build
App from LLB.vi->Dist Build App Image.vi->Application.vi"
I have looked into the NI Knowlege Base and I see the notes about not using forward slash in VI names, and I have complied with this naming restriction.
Do you have any suggestions??
Thank You,
Jerome Whelan

Jerome,
I strongly suggest that you submit a support request to NI at ni.com/ask. But first, try the following.
The error you are receiving is a missing file. The source could be your build. I have received error 7 on many occasions building an app (on Windows) because I had the source code open. Be sure that you first open all of your code, and do a "Save All". Then, close all code, and close LabVIEW. This will ensure that all VIs are out of memory. Then, open the app builder anew, and try building your application.
If you still have the problem, try doing a test build of a simple "Hello world" type of VI that has no subVI calls. Follow the procedure above to dump the memory, and build it. If you still have the error, then the problem is with
the Application Builder, at which point, you will want to contact NI.

Error 7 application builder invoke node

I get this error when I tried to build an application. "Error 7 occured at Invoke Node in Dist read linkage.vi-> Dist Cmp Settings to Disk Hier.vi-> Dist Build App Image.vi-> Build Application.vi Possible reason, LabView: File not found.....and then NI-488 Non Existent board." Anyone knows why? I was able to build application just fine last night. But then when I tried to build it this morning, that's the error that I got. Thanks.

Check the info in this link:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000016730000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=Error+7&USEARCHCONTEXT_QUESTION_S=0

Error 7 in Invoke Node in 'Dist Build App from LLB.vi'

Similar Messages

Maybe you are looking for