Error code 5 and adobe updater

I'm getting error code 5 on startup of indesign cs4.
I think it is due to adobe updater wanting to update my new computer (I have spent hours doing updates in the background while working)
Is their a way I can do all the updates at once, or just skip to the most recent update?
Thanks

Try asking in the Installing, Downloading and Setting Up forum here:
Downloading, Installing, Setting Up

Similar Messages

  • Error code -29 and -54 updating Time Capsule

    Hi Folks,
    While trying to update Time capsule .... New .... 802.11ac.  I get an error code -29. After a restart of the iMac I get erro code -54 while trying to update. Any ideas? 
    Thanks

    I just need to be clear what update you are doing.
    Are you doing  a firmware update?
    Or is this the setup and after the setup completes the TC is still wrongly setup and you are not able to complete the setup wizard.
    Let me recommend you use ethernet and do it manually.
    See https://discussions.apple.com/thread/5800974?tstart=0
    This is common in Mavericks.. it is just networking at the tin cans and wet string level.

  • Error Code -120 and saving waveforms

    If anyone is experiencing "Error Code -120" inside Logic, or is getting an error that waveforms cannot be saved...
    I just experienced this, and found a solution that worked in my case.
    These symptoms can be extremely frustrating, because they seem to be permissions related, but you can get these errors even if you have ownership and write access to your Logic session and all associated project files.
    Turns out, "Error Code -120" and inability to update waveforms can both be caused by a permissions problem in .Trashes.
    In my case, I had a directory inside .Trashes on my project drive:
    /Volume/MyDisk/.Trashes/501
    and I didn't have write access to that directory. Created a whole SLEW of problems in Logic and in the Finder, including Error Code -120 and waveform update problems.
    Removing that directory solved my problem (after several hours of pulling my hair out), and I thought this might be useful advice for others.
    Cheers!
    -James

    I wonder if the immutable bit has been set? If that is the case, this article by Michael Conniff might help:
    http://discussions.apple.com/thread.jspa?threadID=121976&tstart=0
    The error code you are getting doesn't quite make sense. According to Mac Error codes, 120 means "The version of the "Mac OS ROM" file is too old to be used with the installed version of system software"--which doesn't seem to have anything to do with anything you are doing.
    Francine
    Francine
    Schwieder

  • Windows Update Error Code 80070663 and 64C

    I am running x64 Vista on an HP Pavillion dv9000 laptop.
    I was cleaning up my desktop when I saw a Word doc I didn't recognize.  I tried to open it and got a Windows Installer window saying "Preparing to Install".  I have an activated, legal version of Microsoft Office 2007.  This is the first time
    I've seen that window pop up.  I let it try to install whatever it's trying to install and it comes up with an error: "This update package could not be opened.  Verify that the update package exists and that you can access it, or contact the application
    vendor to verify that this is a valid Windows Installer update package."  I am the administrator on this computer.  I have full access to all files.
    This prompts me to start Windows Update to see if that will fix it.  That's where the error codes come in.  The windows updates: "Microsoft .NET Framework 3.5 Family Update (KB959209) x64" and "Security Update for Microsoft Visual C++ 2008 Service
    Pack 1 Redistributable Package (KB2538243) yielded the error codes 80070663 and 64C.
    I noticed when I press Start, the power button occasionally says "Installs Updates then Shuts Down".  I didn't click it because I had work open I needed to work on later.  Then when I left the computer and came back, the power button didn't have
    the shield on it that said "Installs Updates then Shuts Down".  I shut down my computer anyway and it didn't install any updates, and this is where I'm at.  I've retried installing the updates via Windows Update and it still shows the original error
    codes.
    I've researched this error and came across Microsoft Fix It, downloaded as: "MicrosoftFixit.wu.LB.137269729445221149.2.1".  I've run it and it did not solve the problem.
    Please help,
    Jake

    Jake, did you ever find a solution to your problem? I'm afraid I can't help if you didn't, but I'm experiencing the same problem.
    I also run Vista and had no problems until recently when I had an installation failure on 12th April 2014 for the same two updates:
    Microsoft .NET Framework 3.5 Family Update (KB959209) x86 - (Installation status: Failed. Error details: Code 80070663)
    Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) - (Installation status: Failed. Error details: Code 64C)
    I don't know whether it's these updates that caused the problem or an earlier update that has stopped these updates been installed.  The PC is generally working but Word & Excel don't load any more. I get a 'Preparing to install' popup follwed by
    the message: 'This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.'
    If you did find a solution or any one else knows of one then I'd be very grateful.
    Dave.

  • Windows Updates Error Codes 80070308 and 80070643

    Recently I have a problem with windows updates patches for this month (June 2014).  I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643.  I tried to disable the Symantec Endpoint, used the Microsoft
    .NET Framework Repair Tool to fix the .Net Framework related error but still have failure.  I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched.  How do I prevent
    the installation failure, all the PCs have no problem at last month.  Any suggestion, many thanks.

    Hi,
    If your computer is having problems finding and installing operating system update, I suggest to
    try the windows update troubleshooter.
    To run a Windows Update troubleshooter:
    http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
    An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
    http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
    this error can appear when installing updates for Microsoft Office 2003,
    to fix Windows update with error code:80070643:
    http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
    If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
    Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
    Regards
    Wade Liu
    TechNet Community Support

  • Frozen ipod after new updates, will not recover, error codes 1601 and 1602

    i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.

    I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
    Try these steps with your touch.
    1. Unplug the device from your computer
    2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
    3. Start iTunes
    4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
    5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
    6. Let go of the button and follow the on screen instructions to restore the touch.

  • What is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

    what is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    Above from:
    http://support.apple.com/kb/TS3694

  • ERROR CODE 50 AND 54 AFTER UPDATING TO IOS 5

    I updated my iPhone 4 to ios5 and when it was restoring iTunes said the restore was interrupted and error code 50 and 54. I lost current photos and some apps although iTunes had reported that my phone was backed up. Has anyone else received these errors and how can I fix it?

    Not sure why, but have you taken the troubleshooting steps recommended in the User Guide (restart, reset, restore)?

  • Error Code 8024200D while installing update KB3000850 for Windows 8.1

    Error Code 8024200D while installing update KB3000850 for Windows 8.1
    I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
    Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
    You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
    Hi Michelle,
    Thank you for posting your query in Microsoft Community.
    I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
    Is your computer connected to domain?
    Which security software is installed in the      computer?
    Do you remember making any specific change in the      computer prior to the issue?
    This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
    improvements.
    Cause:
    This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
    check the status.
    Method 1: Depending on the architecture of your
    Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
    All supported x86-based versions of Windows 8.1: [link] Download the package now.
    All supported x64-based versions of Windows 8.1:
    [link] Download the package now. 
    Restart is required.
    Method 2:
    If the issue still persists, run the Windows Update Troubleshooter and check the status.
    Click to run
    [link] Windows Update Troubleshooter
    Also refer to:
    [link] Troubleshoot problems with installing updates
    Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
    Regards,
    Niranjan Manjhi
    Dear Niranjan,
    Thank you for your answer.
    To answer your questions:
    1) Yes, my laptop is connected to the domain,
    2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
    3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
    In your answer, you suggested 2 methods for resolving the problem.
    I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
    Potential Windows Update Database error detected Ox800F08F: Not fixed
    Windows Update components must be repaired: Fixed
    And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
    As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
    Michelle
    Hi Michelle,
    Thank you for keeping us updated on the issue.
    Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
    is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
    Please post your question in the link TechNet Forums.
    Regards,
    Niranjan Manjhi

    Hi there @Achintya-only
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
    Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
    Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
    What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
    Please let me know what you find.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Error code msvcr80 after last update now itunes will not open

    Error code msvcr80 after last update now itunes will not open.  Reinstalled and still does not work

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98968)

  • Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    Receive an A12E1 Error Code when trying to update Photoshop CC.  Running an iMac with 10.7.5.  My OS Drive is formatted to Mac OS Extended (journaled).  Any suggestions?

    A12E1 download & install error http://forums.adobe.com/thread/1289484
    -more A12E1 discussion http://forums.adobe.com/thread/1045283?tstart=0
    Case sensitive https://forums.adobe.com/thread/1483096 may also help... or may not, I'm on Windows

  • Keep getting error code 1 and will not download

    keep getting error code 1 and can not dowload adobe cc

    Here's some advice from adobe
    Error: "Failed to install" | Creative Cloud Desktop

  • Itunes install error codes 2503 and 2502

    I have purchased a new PC for Windows and cannot install Itunes. I am getting error codes 2503 and 2502. My music is in the Music / itunes file.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error Code 2755 and hang-up at "Registering Modules"

    So a few days ago I decided to download iTunes 7, and everything in the installation seemed to be going fine until it stopped for about half an hour at "Registering Modules: iPodUpdaterExt.dll". I cancelled the installation, but iTunes worked anyway, and I thought that maybe it wouldn't really be an issue. I was wrong.
    I can't update the software on my Nano to the 1.2 version because the installation never really finished. And when I tried a few more times to re-download the installation files, it didn't work, gave me this error code 2755, and a little note popped up saying the installation encountered an unexpected error before it could be completed.
    If anyone could give me any advice, that'd be fantastic.
    Dell Dimension E510   Windows XP  

    This is the exact same problem that I'm having currently, Right now, I'm in the installation process for iTunes 7 and it has been taking a while to move on past "Registering Modules". I did the same thing before and cancelled the installation because it wasnt moving on, and later opened iTunes 7 to find it worked fine. Unfortunately, it didnt allow my iPod to get updated and nopw I have iPod games that are sitting around and need to get onto my iPod. Can someone please explain what is going on with the "Registering Modules" process of the installation?

  • I am getting Error code : 50 while installing update on CC

    I am getting Error code : 50 while installing update on CC@

    Please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve your current error.
    Regards
    Rajshree

Maybe you are looking for