Error code 80C8042D syncing email on multiple acco...

hi,we have many nokia 625 phones for our works and we are experiencing a number of issues when trying to setup multiple email accounts.
the phone starts to sync and downloads a few days of mails the after a while (a number of hours) the following error occurs error code 80C8042D. all other email syncing on other accounts say syncing but its greyed out and you are not able to delete the setting.
while waiting for the syncing to fail the phone becomes unresponsive. you can text or call. if you reboot the phone none of the apps load.
switching to wireless does nothing either.
Any advice appreciated.

Hi, @phillbl.
Aside from the said error code, are you getting an error message? Consider checking this link: http://answers.microsoft.com/en-us/winphone/wiki/wp8-wpemail/windows-account-not-syncing-error/b8791... & try the listed workarounds. Do not hesitate to get back to us regarding how it will go.
Congratulations on your first post and see you around!

Similar Messages

Ovi Suite 2.2.0.245 error code 8004fd02 syncing N9...

When syncing contacts on my N900 the status bar progresses to about 75% completion and then I get an error (attached) stating that the Contacts did not sync, that I should unplug the USB cable (or Bluetooth) and reconnect and sync again. I have done this multiple times and I keep getting the same error. The error code number is 8004fd02
Solved!
Go to Solution.
Attachments:
error.JPG ‏196 KB

Hi,
We are really sorry to hear this.Could you please provide us the logs so that we can investigate on this? Kindly send the details here: [email protected]
Here are the instructions for attaching log files:
Follow the instructions and download debug_conf.txt
"Please follow these instructions to gather and send the log files:
1) Exit Nokia Ovi Suite
2) Download and unzip the file debug_conf.txt
3) Copy the file in your PC in the installation folder (Usually C:\Program Files\Nokia\Nokia Ovi Suite) If the file already exist, replace it.
4) Open Nokia Ovi Suite and do whatever you need to do to reproduce the problem
5) Exit Nokia Ovi Suite
6) Go to your %TEMP% folder
In XP: C:\Documents and settings\your_username\LocalSettings\Temp and In Vista and Windows 7: C:\Users\your_username\AppData\Local\Temp
but can be found also by entering %TEMP% to the Windows Explorer's address bar
7) Take a copy of the files called debug_log.txt and DalMeasurementFile2.log
8) Open Control Panel - Administrative Tools - Event Viewer - Application - Right click - Save Log File As (and use the text format)
9) Remember to delete or rename debug_conf.txt after gathering the log files" and collect the logs files and attach in this mail.
Attachments:
debug_conf.txt ‏2 KB

Error code when syncing iPhone

Elements 7 used to work just fine with my iPhone until about a week ago. iPhone upgraded it's software during this time.
Now when I try syncing iPhone, Adobe Photo Downloader opens, finds the iPhone, starts loading pics, then a window pops up with the following code:
Error Code c0000005
Address 7c910a19
Then Adobe shuts down without moving any of the pics.
It used to work fine, now nothing.
Apple insists that the problem is from Adobe's side as they have no record of that error code.
Anyone have an idea?

I followed the advice to remove email attachments, and tried some additional steps. Here's what I did:
First, I deleted any photos from the iPhone that were saved from email attachments. I then tried to download via APD. The same error came up as before and APD terminated itself.
Second, I deleted any photos saved from any other source (web pages, etc), as well as any photos that had been created by iPhone photo editing apps. The only photos left on my iPhone were those taken specifically with the iPhone camera and not altered by any other app. I then tried to download via APD again. Again, I got an error and APD terminated itself.
Third, I tried removing all vidoes from the iPhone. Again, I got an error in APD and it terminated itself.
Fourth, I deleted all remaining photos from my iPhone, leaving the Camera Roll on the iPhone completely empty. I then took a new photo with the iPhone and tried to use APD to download it into PSE Organizer. It worked fine. No error.
Fifth, I attached a photo from another source to an email and sent it to my iPhone. I received the email on my iPhone and saved the attached photo to my iPhone's Camera Roll. I then used APD and was able to download both photos (the one taken with the iPhone and the emailed attachment) into PSE. Apparently, being a saved email attachment is not, on its own, enough to cause an error in APD.
Conclusion: I can, for the time being, use APD to get photos from my iPhone into Elements. It seems APD didn't like something about one or more of the photos previously on my iPhone. Only time will tell if this issue could come up again.
I hope this helps some of you who have the same problem, since official PSE support is so lacking.

Error 80302, cannot sync email need password, email thru AOL?

Can anyone assist. I have AOL on my phone, when i tried to sync up my email i received this error. I have tried to update passwords and remove program and download again. I also did a factory reset and this still has not worked. I went to set up account, and states that is already on phone. Any ideas how to fix or what i should do ?

Hey there ladkristen,
I know how convenient it is to receive e-mails on your phones. It keeps you connected to the office even when your not there. I am sorry to hear that you are having so much trouble and I absolutely want to see what I can do to get you back up and running.
Thank you for trying the factory reset, as if there was a bug in the phones software, this step certainly would have fixed it.
This seems to be a known issue that a lot of customers are having with their AOL accounts. There seems to be some miscommunication between the VZW services and AOL's.
As a work around please try re-adding the AOL account,http://vz.to/16mPrMC. When you get to the select a service option, select Other, instead of AOL and try adding it that way.
Please keep us updated with results.
NickB_VZW
VZWSupport
Follow us on Twitter @VZWSupport

How do I sync emails on multiple devices so that they show as read when opened on different devices?

I can't get my mail on my phone to show as having been replied on after I've checked and replied on a different device like my laptop. Can anyone help?

What type of email account do you have? What you describe is the normal operating mode for an IMAP email account. If you have a POP email account, that is very difficult to achieve. (I don't know of any way.)

993 error code setting up email

Attempted to set up yahoo mail on new iPhone 5. Now yahoo mail does not work on iPads. Errorcode 993.

This probably indicates a problem with firewall settings.

The SMTP Error Code from a message that was not sucessfully delivered ?

hello,
I'm developing an aplication that uses Java Mail and
send emails, but I need to get the error code if this
email was not sucessfully delivered, use
mail.smtp.dsn.notify to destination return an email in case
of failure.
Thaks for your help.
rania+

Do you mean the SMTP server reply codes? These are the codes that are returned when the client tries passing the message to the server. The are from RFC 821 (http://www.ietf.org/rfc/rfc0821.txt).
500 Syntax error, command unrecognized
[This may include errors such as command line too long]
501 Syntax error in parameters or arguments
502 Command not implemented
503 Bad sequence of commands
504 Command parameter not implemented
211 System status, or system help reply
214 Help message
[Information on how to use the receiver or the meaning of a
            particular non-standard command; this reply is useful only
            to the human user]
220 <domain> Service ready
221 <domain> Service closing transmission channel
421 <domain> Service not available,
closing transmission channel
[This may be a reply to any command if the service knows it
            must shut down]
250 Requested mail action okay, completed
251 User not local; will forward to <forward-path>
450 Requested mail action not taken: mailbox unavailable
[E.g., mailbox busy]
550 Requested action not taken: mailbox unavailable
[E.g., mailbox not found, no access]
451 Requested action aborted: error in processing
551 User not local; please try <forward-path>
452 Requested action not taken: insufficient system storage
552 Requested mail action aborted: exceeded storage allocation
553 Requested action not taken: mailbox name not allowed
[E.g., mailbox syntax incorrect]
354 Start mail input; end with <CRLF>.<CRLF>
554 Transaction failed

Customize Error Code

If there is an error in my subvi, in the error cluster, I would change the status to True and the source to my error message. I usually don't change the error code at all. What are the advantages of using error code? If I have multiple drivers and they all have etheir own error code, won't there be a conflict?
Kudos and Accepted as Solution are welcome!

jyang72211 wrote:
How does the code givesextra enough if I put all the error information in the source entry of the error cluster?
Let say I have 3 seperate drivers, and each driver uses errro 5001, 5002, and 5003. Won't that be a conflict?
Usually the error message displays all the possible causes. In your case, if you get error 5001 it will list the 3 messages.
As an example: here two possible causes are listed for an error 5000
Ben64

Can't connect to PSN. Error code: ce-33987-0

Almost every night I can't connect to PSN. Error code: ce-33987-0
After multiple PS4 restarts and my router restarts - it connects. Sometimes it connects after few hours without doing anything at all. So I couldn't find any pattern.
My router and internet is perfect - all other devices at home has perfect internet connection at full speed.
I tried all the tricks I've found in this forum (make my PS4 primary, connect to wifi and connect back to cable, do not turn off PS4 and leave in standby, check NAT type etc.).
But nothing helped.
Connection test shows NAT Type 2 which is perfectly OK I guess.
Is this PSN that unstable or what?
How should I solve this problem?

I've been having the same problem for over a week, but I think I found the solution to it.Firstly, my internet setup is an old netgear modem-router combo hooked up to a new TP-Link (n) router. The netgear is set to modem only mode. My ps4 is connected wirelessly downstairs.For about 3 months, my ps4 was working normally with no problems, but about a week ago this error code started popping up inconsistently. Sometimes everything was fine, most times it wasn't.I isolated the problem to the PS4-Router communication, as my ps3 (and everything else at home) worked perfectly with no changes to the setup. Possible Solution- Today, I factory reset both devices (Netgear and TP-Link routers) and set them up to the point where they worked normally (with my phone, laptop, etc).Then, I enabled UPnP on BOTH devices, and also Forwarded all the necessary ports for my PS4 on the TP-Link router.I changed the wireless channel on the TP-Link to [1] from [6].I also changed the wireless channel width on it from [auto] to [20mhz]. This automatically reduced my max Tx rate to [130mbps] from [300mbps]. (I suggest doing this manually if it doesn't change automatically).I rebooted the TP-Link router, and started up my ps4 after a few seconds. The system loaded perfectly, PSN signed in instantly, and I played an hour on BF4 with no problems. I also restarted my PS4 again to see whether the settings would 'Stick'. They did, it still ran perfectly. I won't play again for a few hours, but I will report here if it does/doesn't work. Good luck trying my solution, Hope it works for you.Happy Gaming

Error Code: 8103010d when dowloading

I had a notification that my Nokia Maps had an update. As I clicked to install, it will install only halfway before I get an Error Code: 8103010d I have tried multiple times to redownload with no success.

Hi, prasadpaddy123. Are you still unable to download an app from the Store? When you go to Store> ..> downloads, is it listed there? You're getting the same error code, right? If yes, it appears because the app is not currently compatible with Windows Phone 8. If it's another error code, please provide. Does it appear regardless of the internet connection you are using? Can you visit any website via the IE app or use web-based apps with no issues?
When you said 'themes', are you referring to those under Settings> start+theme?
If you managed to fix this issue, would you mind sharing the fixes you've tried? This information will surely benefit other users. We hope to hear from you soon. BTW, welcome to our community.

Validating XML files and generating error codes

I want to validate an XML file with a schema & also get hold of the fields/attributes/tags
that caused an error and generate error codes based on that. Any suggestion on
how this can be done. DOM, SAX allow to do validation but how do I know exactly
know which tags caused errors. We have to track the errors codes.

"SP" <[email protected]> wrote:
Use the HandlerBase class for getting hold of the tags and its attributes.
The methods in this class take the tags and attributes and throw the
SAXException. You can use these methods to find out which tag is throwing
an
exception.
Hope this helps
SP
I am using the DOMParser.parse method with the xerces parser. I have an error
handler registered to get hold of the errros. What happens is the parsing stops
at the first instance of an error. I want to continue parsing to get hold of all
errors. How can I achieve that?
>
"leena" <[email protected]> wrote in message
news:[email protected]..
I want to validate an XML file with a schema & also get hold of thefields/attributes/tags
that caused an error and generate error codes based on that. Anysuggestion on
how this can be done. DOM, SAX allow to do validation but how do Iknow
exactly
know which tags caused errors. We have to track the errors codes.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

Sync error code (-54)

I get the following error code when attempting to sync my 5s on my HP computer running Win 8:
-The iPhone 5s cannot be synced. An unknown error occurred (-54).
I purchased AppleCare when I bought this phone and after multiple phone calls with AppleCare the last contact I had, I was told "We will review the diagnostic files you uploaded, and I will call you back." That was three weeks ago, and after sending two follow up emails, now the supervisor at AppleCare has not and does not call back to resolve. (I think AppleCare is no longer the value it once was).
Has anyone else had the sync error code (-54)?
How did you resolve it?

On the Windows version of iTunes, error -54 means a general IO error occurred that can be caused by many different things: a file is corrupt, a file is locked, or an .m4a file could not be converted to a lower bit rate.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

Transferring multiple videos by windows explorer. Error code 0x80030001

Phoostream is a great feature. Transferring photos have never been so easy. However, I do have a qualm regarding the service and that is that it does not sync videos! Therefore, I still have to go back to the arduous processes of plugging it into my computer and selecting the videos to be transferred to my computer. However, it wasn't as easy as I had expected. Windows import feature imports both photo and videos and I can ONLY import new media. Old media is not imported so that means that videos that I synced that may have been deleted are not imported through windows explorer.l, and I cannot get it to transfer anymore. I tried copy and pasting multiple videos from the windows explorer but it prompted me the error code 0x80030001 and it cannot be transferred. I have to transfer them individually. Anyone has a reliable and easy way to get my videos to transfer from iPhone to PC?

yeah! sure windows problem... neither the location nor the folder path is given in default industry standards... by APPLE DEVICE
But if I need my latest taken picture from an apple phone... one can see over more than 30 directories random named like 845OJOX or 900DZDMI ???
In those random named directories lies apples 'closed coding' following faulthy tagging and resulting in different and random again batches of photos taken.
If I do a search in windows I can find all the pictures on this apple phone and even better i'm in control to sort the way i like!
Unfortunately the apple 'faulthy tagging method' makes it impossible to communicate with any other divice about accessing...
This is a simple poor show of apple's limited object oriented filing...
The same i had from pictures taken of a holliday where i did change my phone to local time and my wife's phone not and the seperate camera had also home settings... when i imported those all together after holliday via a program called i-tunes I had to buy 3 different apps and store all these holliday pictures(8gig) seperate (problem since 16gig should be available on apples device; i had only 9gig freed by eliminating all apps possible... and needed 24gig total for apps photo database) in all the overpriced purchased apps, to finaly show those pictures time synchronized to the holliday !
How hard it can be to sort files as the user needs????
DRAMATIC POOR APPLE PERFORMANCE (i thought apple was so good with pictures and so..)
On my pc I also did import the holliday pictures from these three devices and sorted those within minutes(!!!) right to holliday time sync...
Anyway i found also a time consuming way to copy latest taken pictures in random apple maps
(i wish to select a specific time batch and drag these to new map on pc (no apple pc))
look in all the random named apple device maps and check if there is a picture belonging to the batch you need and drag these to the new map...
Something what could take from any other phone some milisecs... takes with apple devices 2 days time !!!!
Best way for taking photo's you need later on other devices than apple... take the photo's on a non apple device and save extra holliday time!

Lumia 820 has stopped syncing Gmail - Error codes...

Gmail has suddenly stopped syncing on 04 Sep 13. Error codes see heading
I tried using an Application-specific password with the same error code results
My laptop is running Windows 7
Got the Lumia 820 only recently after having used the Lumia 800 w/o probs ever
Tried to delete the gmail acct on the phone, but did not suceed - how to do this?
Do not want to do a factory reset, really!
Any ideas anyone?
Ta Mike

Hi, reddired.
Are you receiving the same error code on your Gmail account?
You may try the following steps to delete your email:
Turn on the airplane mode.
Restart the phone.
Go to Settings > email+accounts > press and hold your email & then tap delete.
Turn off the airplane mode.
Reset up your email.
Let us know the results.

Error code 80C8042D syncing email on multiple acco...

Similar Messages

Maybe you are looking for