Error executing the DTP

Hi All,
I have a transformation for a Write Optimized ODS. The source for this transformation is an infoobject. This transformation produces 4 records for a single record from an infoobject. I have taken care that the semantic keys of the ODS are not getting duplicate. But when i run the DTP for one record, it produces 4 records from one record but while updating the ODS it fails with following error:
"Record 0, segment 0001 is not in the cross-record table"
"Error while writing error stack"
"Error in substep Update to DataStore Object"
"Record 0, segment 0001 is not in the cross-record table"
"Exception CX_RS_STEP_FAILED logged"
What could be the reason ?
Regards,
Tej Trivedi

Hi All,
I solved it on my own.
Regards,
Tej trivedi

Similar Messages

Short Dump Error while executing the DTP

Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.

You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP..

Short dump while executing the DTP

Dear Experts,
While executing the DTP the system is generated short dump and it is Quality server not in Development system.
The error details are in method Calculate_keyfigure_ds and the data is loaded for IS retails from POSDM.
The error details:
"The MOVE-CORRESPONDING statement can only be used on operands with a
structured type.
In the case at hand, this condition is not fulfilled: Operand "<L_STRUC>" has
the type "C"."
Regards,
Amit

Hi Amit ,
Move corresponding statements can be used for structures only and from the error message it seems that there is datatype mismatch.
Check for the errors ion link :
http://help.sap.com/abapdocu/en/ABAPMOVE-CORRESPONDING.htm
Hope it helps ,
Regards,
Supriya

Error Executing the report

hi ,
I run a report from workspace and it runs fine for me. There is another admin who's trying to run the report and its throws following error for him:
Error 5200: Error executing the query.
We both have same privileges in shared services.
I have created this new report.
Just to let you know it worked fine when i created on 1st day for both of us and is now throing error.
Thanks!

Hi,
Have the other admin turned on the preview option in the workspace financial reporting preferences.
This sometimes can cause problems if it is turned off.
Cheers
John
http://john-goodwin.blogspot.com/

"error executing the process" rebooted there after it doesn't turn on

Hi.
I have an important problem with my Lenovo k900 brought in september 2013. It gave an error like this "error executing the process..." I reboot the phone, but since that moment the phone doesn't turn on.
I have tried a hard reset (power + volume(+)) but it doesn´t work.
When I press the power button, the lights below switch on for a few seconds, but the phone doesn't turn on.

This is a tough problem to solve if your not experienced with fixing Mac's, you can opt to take it to a local PC/Mac tech to solve it or you can attempt things on your own.
If you opt for the local help make sure talk to them if you have backups of your data or not, thus may require data recovery efforts performed first before wiping and installing everything fresh.
Gray, Blue or White screen at boot, w/spinner/progress bar

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Error Executing the BPM

Hi all,
I have configured the BPM with WDJ. When execute the BPM i am getting below error,
Context data structure of the UI component "com.sap.demo.testui.wd.comp.scrapuicomp.TestUIComp" does not match the data structure known by the task Interface mismatch found at processing Context Attributes
Could some one please help in fixing the issue?
Many thanks in advance.
Best Regards,
Prasad.

Hi Prasad,
Selet the task in the process diagram and reassign the UI for the task, most probably iit will resolve your issue.
Cheers,
Arafat

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

Error in the Analytic View

Hi,
Created a input parameter to display the currency code as EUR(Europe), USD(US Dollar), INR(Indian Rupee).
Have created a Calculated Column and invoked the Input paramter within the Calculated Column. When the User selects the respective currency, must display only the valid data. But in this case, I am unable to preview the data and it results with the error.
Formula for the Calculated Column is -
(('$$CURRENCY$$'='EUR'),"SALES REVENUE" *1.4,"SALES REVENUE")
Error executing the query
Error: SAP DBTech JDBC: [266]: inconsistent datatype: [6970] exception 6970:
AttributeEngine/InternalTable.cpp:6607
Evaluator: type error in expression evaluator; $function$=createExpressionColumnEx; $message$=unable to create expressioncolumn 'fixed(if(('EUR'='EUR'),"SALES REVENUE" *1.4,"SALES REVENUE"), 8, 2)': Evaluator: type error in expression evaluator;fixed8_8.2 fixed_8(if(int eq(string 'EUR', string 'EUR'), [here]times(string "SALES REVENUE", decfloat '1.4'), string "SALES REVENUE"))(6970); $message$=unable to create expressioncolumn 'fixed(if(('EUR'='EUR'),"SALES REVENUE" *1.4,"SALES REVENUE"), 8, 2)': Evaluator: type error in expression evaluator;fixed8_8.2 fixed_8(if(int eq(string 'EUR', string 'EUR'), [here]times(string "SALES REVENUE", decfloat '1.4'), string "SALES REVENUE"))(6970)
Can any one let me know the process to resolve this issue?
Thanks and regards
Sanjay

Krishna,
The data for the SALES REVEUE is declared as - for Ex. 1255 EUR.... I have mentioned this as integer and proceed furter, but I could nt import the data . Results in warning when i perform this. Data is not populated in the respective tables.
Please find attach the screen shot. What must be done in this case
Thanks and regards
Sanjay

Errors executing bulk query when updating a Sharepoint Linked List from Access

Hi all,
I have a Sharepoint list that is a Linked List with MS Access. It has just under 5,000 items (4,864), thus meaning it avoids the reduction in functionality lists of greater than 5,000 items have.
Among the list are five calculated columns. These take the information from another column (different employee numbers), and by using a formula produce a clickable link to my company's Directory page, where that particular employee's info is displayed. I'm
not sure if these five columns are relevant to my query, but I'm mentioning them in case.
My problem is this: Frequently when I run any query on the list that updates the list, I get this error: "There were errors executing the bulk query or sending the data to the server. Reconnect the tables to resolve the
conflicts or discard the pending changes".
When I review the errors, it says they conflict with errors a previous user made (with that previous user being me). It frequently highlights several columns, despite the info in them being identical, and the calculated columns (with the original showing
the value they contained and the new showing #VALUE! (as Access can't display the formulas).
However, if I click Retry All Changes, all the update stick and everything seems fine. Why is this happening? It's proving very annoying and is really stopping the automation of my large number of queries. A list of 5000 items isn't particular big (and they've
got roughly 100 columns, although I didn't think that was too large either, given Excel's 200+ column limit).
Is this due to poor query design and SQL? Is this due to connectivity issues (which I doubt, as my line seems perfect)? Is this due to Access tripping over itself and not executing the update on each row in the table, but rather executing them concurrently
and locking itself up? I'm at wit's end about it and really need to get this sorted.
Thanks in advance for any suggestions.

Hi amartin903,
According to your description, my understanding is that you got an error when you used a linked list from Access.
The table that you are updating is a linked table that does not have a primary key or a unique index. Or, the query or the form is based on a linked table that does not have a primary key or a unique index. Please add the primary key or a unique index.
Here is a similar post, please take a look at:
http://social.technet.microsoft.com/Forums/en-US/545601e9-a703-4a02-8ed9-199f1ce9dac8/updating-sharepoint-list-from-access?forum=sharepointdevelopmentlegacy
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Error while executing a DTP

Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit Garg

This error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM

Error while activating the DTP

Dear all,
We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
Error from PSA ****
Message no. RSAODS000
Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
Can experts throw light on this?
Regards,
M.M

Hi Magesh,
Please check the below solution:
you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
Note No: 968504
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
With Regards,
Ravi Kanth

Receiving SQL Error: INTERNAL_ERROR while executing the query

Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi Y

OSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers.

Error executing the DTP

Similar Messages

Maybe you are looking for