Error importing 11.2.0.1 export to 11.2.0.3
Hi all,
we have two machines. let's call them db_1 and db_2.
db_1 has version 11.2.0.1, db_2 is a clone of db_! and has been updated by our dba to 11.2.0.3.
Now I need move a schema with its data from db_1 to db_2.
I used datapump for creating the export using the following command:
expdp DIRECTORY=DATA_PUMP_DIR DUMPFILE=XY_11.2.0.1_20130110_1217.expdp LOGFILE=XY_11.2.0.1_20130110_1217.expdp.log SCHEMAS=XY
I can see no errors in the logfile.
The exp-Log says: Master-Tabelle "XY"."SYS_EXPORT_SCHEMA_01" erfolgreich geladen/entladen -> so, everything is fine.
Now I tried to import the dump to db_2 by using this command:
impdp LOGFILE=XY_11.2.0.1_20130110_1217.expdp.log REMAP_TABLESPACE='XY_PERM':'XYZ_PERM', REMAP_SCHEMA='XY':'XYZ' SCHEMAS='XY' DIRECTORY=DATA_PUMP_DIR DUMPFILE=XY_11.2.0.1_20130110_1217.expdp
I got the following errors (sorry, I only have German error messages):
Import: Release 11.2.0.3.0 - Production on Thu Jan 10 12:46:22 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Username: XYZ
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39006: Interner Fehler
ORA-39068: Ungultige Master-Tabellendaten in Zeile mit PROCESS_ORDER=-4 -> now I got an error with the master table, which was fine in the export
ORA-01536: Speicherplatz-Zuteilung fur Tablespace 'XYZ_PERM' uberschritten
ORA-39097: Bei Data Pump-Job ist ein unerwarteter Fehler -1536 aufgetreten
Can anyone help?
Thanks in advance,
Andreas
I should have added that you are essentially downgrading so you need to tell Data Pump on 11.2.0.3 that you want to be able to import into 11.2.0.1. To do this, use the version parameter during the export command.
You could also do this over the network link (if you have one defined on the target pointing to the source). In this case, no version is necessary since the Data Pump code on the source will negotiate the version with the Data Pump code on the target.
Hope this helps.
Dean
Similar Messages
-
Import mode FULL conflicts with export mode TRANSPORTABLE
Hi,
We are trying to import transportable tablespaces and are getting an error "import mode FULL conflicts with export mode TRANSPORTABLE. This is the second time we've seen it, the common thread seems to be that it only shows up with the remap_schema qualifier (the example below is with ASM, but we have seen it also without ASM). Does anyone have any suggestions as to how this can be resolved?
Thanks,
Dan
impdp SYSTEM/xxxxx@DEVSUP DIRECTORY=CSF_DIR DUMPFILE=csf_au_q412_b1.dmp logfile=dev_imp.log TRANSPORT_DATAFILES='+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.1130.804322725','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.631.804322681','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.798.804322635','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.968.804322581','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.1261.804322791','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.1727.804322951','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.309.804322865','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.684.804323047','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.752.804323141','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.843.804323247' remap_schema=CSF_AU_Q412_B1:CSF
ORA-39002: invalid operation
ORA-39061: import mode FULL conflicts with export mode TRANSPORTABLEWe are trying to import transportable tablespaces and are getting an error "import mode FULL conflicts with export mode TRANSPORTABLE
impdp SYSTEM/****@ESUST DIRECTORY=CSF_DIR DUMPFILE=csf_na_q212_b1.dmp
TRANSPORT_DATAFILES='+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1907.805396709','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1908.805396709','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1909.805396653','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1910.805396647','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1911.805396591','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1912.805396591','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1913.805396535','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1914.805396535','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1915.805396479','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1916.805396479','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1917.805396425','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1918.805396425','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1919.805396369','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1920.805396365','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1921.805396321','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1932.805396319','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1933.805396263','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1934.805396261','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1935.805396205','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1936.805396201','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1937.805396137,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1938.805396137,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1939.805396081','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1954.805396079','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1958.805396013,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1959.805396013,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1960.805395937,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1961.805395923','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1962.805395867','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1963.805395867' remap_schema=CSF_NA_Q212_B1:CSF
ORA-39002: invalid operation
ORA-39061: import mode FULL conflicts with export mode TRANSPORTABLE -
Error import / export in console standalone
hai all,
error import / export in console standalone
iam logged in 9i console standalone pc not connected any other pc.
unable to import or export or load any database
because the error shows that
only on OMS mode is possible
how can import or export or load?
any help?
thanks in advance
rcs
------I have no idea what you are asking or in what environment you are work.
Lets start with the need for a version number ... 9i is not a version ... it is a marketing label. Do you mean 9.0.? or 9.2.0.1 or 9.2.0.8 no one knows.
Second I have no idea what a you intend to convey with the statement "console standalone pc."
Third "unable" means what? That the pc crashed and burned and is a smoldering cinder or you received some error message you thought too unimportant to post? Again ... you've given us no useful information.
Finally what do you mean by OMS? Is this OMS as in the Java application running as part of the Grid Control or something else?
Finally what are you trying to import? How? A clear explanation is required.
If someone reading what you post can not understand or duplicate what you did because of lack of information you will not receive any help. -
Hi,
I am trying to set up a copy of an application on a localhost of another computer using database XE. The application was exported and when I try to import it I get the following error....
1 error has occurred
NOT COMPATIBLE (Your export may contain calls not supported by your application version.)
Does anyone know how I can sove this?
CheersTry the XE or Apex forums. You may have to manually edit the export file so its the same version as the database you're importing into. Whether it will work or not is a different question
-
We have encountered a problem importing images that we have exported from another instance of HTMLDB. Operating systems match (DOS - and it is selected from the combobox on export), application ID-s match, any non-latin characters are removed from image names, but upon last step of importing those images to our test database HTMLDB instance, we get the following message:
Error installing image.
Return to Application
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-00922: missing or invalid option
---------------------------------------set linesize 250-- begin wwv_flow_image_api.remove_image( p_image_name => 'top-bar-conf.gif', p_flow_id => 100); wwv_flow_image_api.remove_image( p_image_name => 'top-bar-logout.gif', p_flow_id => 100); wwv_flow_image_api
What could be wrong? Or where do I send the export file for closer inspection?
KajaFor a few months these exports/imports have worked perfectly, the problem occurred for the first time last week.
I don't know how to export only some images from the workspace (except for the choice between workspace images and specific application images), but when I deleted other than first two images from the export file (in my texteditor deleted others from remove part and also from the insert part of the image export file), then the import was successful - so it must be something about those other files. -
Export problem "A serious error has occured", or hang, upon export to Encore.
Hello,
I am using adobe Premiere CS3 3.2
I am trying to export my project to a DVD. I've been told that the best way to do this with minimizing quality loss is to export to Encore.
My project has some filters that affect system memory and have locked up the computer numerous times before, like Looks Suite and Noise Remover (on some clips)
when I choose export to Encore, then choose settings, I get the error "A Serious Error has occured...." Then I trried lowering the settings, and I got the window that says "Rendering", at least, but nothing appeared in that window after I left it overnight.
So I have some questions:
- What's the best thing I can do to export my movie onto a DVD with minimum loss of quality?
- Should I export as a video file first? Which is the best quality? Then can I export to Encore?
- Does it help to pre-render my entire project in Premiere first, THEN export to Encore?
I'd appreciate some advice.
Thanks!
EDIT: I just tried to export as a Quicktime Uncompressed video with the regular method (Export-> Movie).. and it gave me the error "Could not compile movie..." then the message "adobe premiere pro is running very low on system memory"
So I am assuming this is a memory issue? Then what should I do??
Also, I want to ask- If I put my entire project with all its files onto an external hard drive, then move them to another computer with adobe premiere pro installed which also has the same filters installed, would I be able to export this way?I am quite sure it is a memory problem... the computer exported other videos in the past just fine, but its never been used for making a film with a lot of filters and such that run down the memory, and so it gives me the memory errors.
I am not sure what is "Memtest86+"... I would like to try such a program, but in fact this is not my computer... I am using a Workstation at a University and now I have limited time to complete my project (I must figure out a solution by the end of the day on Monday)
Maybe AVI is the best for some... but I have done comparisons beforehand which found .mov to be the best... and I was even told that uncompressed quicktime doesn't lose quality at all (though in fact it seems to just a bit). So if you not completely sure which will be better, I will go with .mov.
So I will try a few things- like exporting only the "special" clips which used a lot of filters on individually as .mov, then reimporting them into the project, then trying to export the whole thing into encore... If that does not work, I will try to export fragments as.mov (because if I try to export too much at one time, it has the memory error->crash).. then create a new project, import the .mov files, and export to Encore.
I only have limited time to solve this problem.. do you all think I am taking the right steps?
Also one key question I have is about the audio.. do you recommend that I export all of the audio into one wav file, and then put that into the new project? Or should I just export the quicktime files, with their audio, into the project and keep it like that?
I appreciate the help, again -
RUNTIME ERROR IMPORT ABAP PHASE IN HETEROGENIOUS SYTEM COPY
Hi All,
We have started heterogenious sytem copy from windows (mssql_ to linux(maxdb).
In import abap phase at the 128th job it ended with an error Here i attach the log of IMPORT_MONITOR.LOG
ERROR : Execute for create index /BI0/F0RSTT_C01~P on /BI0/F0RSTT_C01 failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/F0RSTT_C01~P" ON "/BI0/F0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" )
(DB) INFO: disconnected from DB
/usr/sap/DM1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/DM1/SYS/exe/run/R3load: END OF LOG: 20110417003352
/usr/sap/DM1/SYS/exe/run/R3load: START OF LOG: 20110417004819
/usr/sap/DM1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/DM1/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jan 23 2008 17:39:05
/usr/sap/DM1/SYS/exe/run/R3load -i SAPAPPL1_24.cmd -dbcodepage 4103 -k -l SAPAPPL1_24.log -nolog -c 10000
(DB) INFO: connected to DB
(DB) INFO: The MaxDB logwriter is switched off#20110417004819
(GSI) INFO: dbname = "DM1 "
(GSI) INFO: vname = "ADABAS D "
(GSI) INFO: hostname = "sgmw-s-relse1 "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "sgmw-s-relse1"
(GSI) INFO: release = "2.6.32.12-0.7-xen"
(GSI) INFO: version = "#1 SMP 2010-05-20 11:14:20 +0200"
(GSI) INFO: machine = "x86_64"
(DB) ERROR: DDL statement failed
(DROP INDEX "PCL4~XPS" ON "PCL4")
DbSlExecute: rc = 103
(SQL error -4011)
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(59) Column(s) already indexed:/BI0/F0RSTT_C01~P)
ERROR : Execute for create index /BI0/F0RSTT_C01~P on /BI0/F0RSTT_C01 failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/F0RSTT_C01~P" ON "/BI0/F0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" )
(DB) INFO: disconnected from DB
/usr/sap/DM1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/DM1/SYS/exe/run/R3load: END OF LOG: 20110417004819
Import Monitor jobs: running 1, waiting 1, completed 128, failed 0, total 130.
Loading of 'SAPAPPL1_24' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 128, failed 1, total 130.
could any one please help me in solving this issue
Thanks!
Vardhan.\\10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
Please check if above said file located under specified path where SAPINST searvhing for it ie at
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA. if this file dont exist them it may be the case that your export is not proper.
Also check if user from which you have started this SAPINST is able to access
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA.
Thanks..
Mohit -
Bad Header error importing Audio from Audition to Premiere Pro
Hey guys,
I'm not sure if anyone is experiencing a problem like this below, but recently, I have been up in arms trying to export a 90-minute feature film's audio (Ch. 1=Dialogue - Ch. 2=M+E - 5.1 Surround Mix) in a .wav file format, and every time I try to export it out, it PLAYS in Quicktime player, but it WON'T import into Premiere Pro (citing BAD HEADER ERROR) in file. I basically tried to utilize every file format there is for audio and such, but nothing is working (including .aif, but it kept cutting out at 13mins into the show). I separated the dialogue music and sfx in 3 submixes, but I needed to combine the Music and Submix into 1 submix to have ONE DIALOGUE Submix, and ONE M+E submix for our distributors. Any help to fix this would be great.Paul,
Sorry to hear about the PC -> Mac problem. Old 6.5 Mac Project opened fine in CS2 PC, after I added the file extensions.
As for the AVI, Curt is correct. There should be a utility for the Mac, like G-Spot, which will tell you everything about your AVI file. Unfortunatly, I do not know if G-Spot is ported for the Mac (www.headbands.com/gspot), so you might need to find similar for you platform. You can then identify the necessary CODEC and install it.
Last, you should be able to find an edit-shop that has CS3 on PC and get them to Import the old Project, then Export it in CS3, so you can open it on your Mac. If not a commercial shop, then maybe a friend with CS3 on PC? Next best thing might be to find a Mac with Premiere 6/6.5 (last Mac version, prior to CS3 ?) and try that route.
Good luck,
Hunt -
MDL1261: Error Importing
Hello, OWB gurus! :)
I exported a process flow into an MDL file from our test environment, say DBTEST.
Upon importing it to our production environment, say DBPROD, I got the following error:
"Error at line 141: MDL1261: Error importing PHYSICALOBJECT PROJECT.PROCESS.PACKAGE.null.
Detailed Error Message:
API0259: The object cannot be edited in Read-Only mode!"
Here are my import options:
1. Create New Metadata
2. Match by Name
Other details:
-- DBTEST and DBPROD have the same project name (say PROJECT), process flow module (PROCESS), etc. They have the same module/database/object names, in short.
-- Repository owner has full access (any procedure)
This only happens whenever I am importing process flows. I can successfully import tables and mappings.
I tried searching answers through the internet, but I don't know why I couldn't find one. I would like to ask the help of our OWB gurus, or anyone, out there. =)
Thanks a lot,
ManoyHi,
No process was running when I imported the objects. I also tried importing other process flows individually (after exporting them one by one), still I got the same error.
Thanks. :)
Manoy -
hi,
we upgraded our TREX 6.1 to 7.0 on a new server. The index export worked fine but when we want to import the index files with the import61-70 python script there is an error showing:
[2009-02-04 13:35:31] : Starting import on 7.0 system
[2009-02-04 13:35:31] : Unzipping archive file(s).
[2009-02-04 13:35:31] : Working on file Y:\Indextransfer\isw25.zip
[2009-02-04 13:35:57] : Closing zip file
[2009-02-04 13:35:57] : Searching for following zip file Y:\Indextransfer\isw25_1.zip
[2009-02-04 13:35:57] : No follow zip archiv found
[2009-02-04 13:35:57] : Finished with zip files
[2009-02-04 13:35:57] : Importing index 4744464b226e4c5de10000000a35e046ccm110
[2009-02-04 13:36:07] : Error importing index4744464b226e4c5de10000000a35e046ccm110
I didnu00B4t find any logs i.e. a better description of the error than this one.
I also dinu00B4t find a sapnote relating to this.
Are there any more logs for the import?
Edit:
I found this in TrexQueueServerAlter.trc
[3284] 2009-02-05 10:13:46.953 e TrexSlice SnapshotFileManager.cpp(00671) : SnapshotFileManager: copy <D:\tmp\trex_import_tmp_20090205-101313\queue\4744464b226e4c5de10000000a35e046ccm110/TREX4744464b226e4c5de10000000a35e046ccm110.ini>-><D:\usr\sap\TRX\TRX04\queue\4744464b226e4c5de10000000a35e046ccm110/TREX4744464b226e4c5de10000000a35e046ccm110.ini> (syncpoint=1) failed, rc=5(Access is denied)
[3284] 2009-02-05 10:13:46.953 e TrexSlice SnapshotFileManager.cpp(00501) : SnapshotFileManager: failed to update <D:\tmp\trex_import_tmp_20090205-101313\queue\4744464b226e4c5de10000000a35e046ccm110> rc=34
[3284] 2009-02-05 10:13:46.953 e Q4744464b2 Queue.cpp(02095) : Queue::restore: : error: file could not be written
[4380] 2009-02-05 10:23:49.609 e TrexSlice SnapshotFileManager.cpp(00671) : SnapshotFileManager: copy <D:\tmp\trex_import_tmp_20090205-102313\queue\4744464b226e4c5de10000000a35e046ccm110/TREX4744464b226e4c5de10000000a35e046ccm110.ini>-><D:\usr\sap\TRX\TRX04\queue\4744464b226e4c5de10000000a35e046ccm110/TREX4744464b226e4c5de10000000a35e046ccm110.ini> (syncpoint=1) failed, rc=5(Access is denied)
[4380] 2009-02-05 10:23:49.609 e TrexSlice SnapshotFileManager.cpp(00501) : SnapshotFileManager: failed to update <D:\tmp\trex_import_tmp_20090205-102313\queue\4744464b226e4c5de10000000a35e046ccm110> rc=34
[4380] 2009-02-05 10:23:49.609 e Q4744464b2 Queue.cpp(02095) : Queue::restore: : error: file could not be written
Edited by: Tobias Nagel on Feb 5, 2009 10:27 AMI solved the problem myself.
I granted everyone full rights to the temp directory while importing the indexes.
It finished without any problems. -
When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@
Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work. -
Error importing CD (required folder cannot be found)
iTunes 10.6, running on a Mac Mini with OSX 10.6.8
Hi all,
A bit of backstory. Been using iTunes to manage my music collection for over 8 years. At one point, I moved my music off of a primary disk to an external disk, although perhaps oddly set up, in that the 'iTunes Music Library.xml' file was still local (under ~User/Music), and just the music files were external (under /Volumes/Media/Music). When the iTunes Media directory structure upgrade happened, the only way I could access my music was to put a soft link from the Music folder to my external drive.
For awhile now, I've been in a state where for the most part, I can listen to all of my music, but when I try to import a CD, I get the 'required folder cannot be found' error.
Help! Do I have to rebuild my file somehow? Edit the xml file directly?
Thanks so much.
I'm happy to provide more information, such as the xml file, directory listings, etc.. I'm just not sure what's helpful.I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.
-
Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report
When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you -
Getting Error :- Only one instance of COBRAS Export can be running at a time
Hi All,
I was checking the Briefcase Mode help file and it mentions for Unity Conection
that COBRAS will run multiple instances of itself – if you schedule multiple backups to fire up at the same time they will all run at the same time.
However if I schedule multiple backups to fire at the same time then I get the error :- "Only one instance of COBRAS Export can be running at a time".
This also happens if the COBRAS windows is left open and the scheduled backup starts in the background.
http://www.ciscounitytools.com/Applications/General/COBRAS/Help/COBRAS_Briefcase/COBRAS_Briefcase.htm#_Toc276653845
I am not sure if I am making a mistake in understanding the statement :- "COBRAS will run multiple instances of itself – if you schedule multiple backups to fire up at the same time" or do we need to add any switch like lot of other application need like /m etc in the field of the scheduled backups as I see as /silent switch for process to run in background automatically but none for multiple instances.
I am attaching the screen shots of the errors I got when
A.) I scheduled 2 backups to run at the same time and the COBRAS application window was open "COBRASExportCUC7.exe" was running and no backup took place and got errors for both the scheduled backups.
And
B.) I scheduled 2 backups to run at the same time and the COBRAS application window was closed off and "COBRASExportCUC7.exe" was not running and one of the scheduled backups started to work and the other one gave error and didn't work
Unity Connection in use :- Version 8.0.3.20000-18
Cobras Export :- Version 1.0 Build 76
Please Suggest.
Regards,
Prad
(E-Mail :- [email protected])Yeah, I’m of two minds on that – on the one hand it’s bad style to have a scheduled application popping dialog boxes (especially if you’re running as an account you don’t log in as regularly) – one the other hand I did have some sites go a while not noticing backups were failing (due to a UNC not flying any longer after a server reconfig) – folks can be bad about checking log files or the event log for issues. A pop up would pretty much guarantee they’d notice on next login at any rate.
I think I may stitch in email notifications in COBRAS Export in the same way they’re in the User Data Dump so failures of scheduled backups would be noticed right away (big, bright email in your box saying “failed!” would do it).
Either way, I’ll update the help and make sure it fails quietly for now when I update some other items on the site middle of next week.
Thanks for the report. -
IMPORT a VIEW from an export dump file
I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
nullOnly I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.
Maybe you are looking for
-
BT Infinity Ipad and Iphone problems
Help please, got fibre installed yesterday and almost everything is perfect, my PC is fine, my wifes Ipad also fine, however; my Iphone and Ipad simply won't do anything. I thought it might be a safari problem so reset the data etc etc, It could acce
-
Rebuilding partitions indexes takes a lot of time
We have 5 partitions in one table with the following sizes: P1 ---- 160MB P2 ---- 160MB P3 -- 1280MB P4 -- 5400MB P5 - 24640MB Nobody is connected to the instance, no apps is running on this server, the server is dedicated to the database and only fo
-
After I hv upgraded os 6 on my iPhone 4, iPhone hung up at least one per day. After u press "End" 2 times at fast speed ( i used to do this in the old os without problem) or when u slide to unlock - the screen suddenly enlarge . I need to reset the p
-
Why is my Creative Cloud login screen showing a black window and nothing else?
After using the Creative Cloud installer and the download looking like it was working, what I presume is a login in window has launched but it's just a black window with a white logo at the top. There is nowhere to enter any information and the only
-
IPhone Restores From Old Backups.
Last night I had to do a restore on my 3 week old 3GS because during my update to the latest FW 3.1.2, it froze the installation process. Now, the part that's frustrating is again, it only gave me very old backups to choose from. I sync my phone ever