Error in Approver list

Dear Friends
In my Approver list when i click on dropdown and selected completed tasks it shows the following error is comming
Unable to perform the request try agian and the problem persists ,inform your system administrator.
Can anybody please let me how can i solve this issue
Thanks and Regards

HI Umang
In my portal we had a tab Approver list where the employee receives tasks,alerts,notifications pending requests to approve leave etc.It is similar to UWL. Inside it we had Tasks tab in that there is a show drop down where there are to values like New and in progress Tasks and Completed Tasks.Then i have selected Completed Tasks it is there in the dropdown like Completed Tasks(2) when i have selected it then on the the top it has given the explained error.I guess the system is not able to fetch the completed tasks.
I guess now it is clear please let me know if you find the solution for it.
Thank you

Similar Messages

Requisition Approvals AME errors on Approval List Rebuild When an Employee

We're using AME for requisition approvals which contains several dynamic approver groups.
The problem is that the approval list can be large and depending on how long it takes the requisition to be approved a person who has already approved the requisition might be terminated in Oracle. The approval list rebuilds after each subsequent approval and errors at the point where the termed person falls in the list.
How can we work around this? Is there a way to get AME to NOT rebuild the list once the approval is in process? Or is there a way to have it not look at stages of the approval list where approval has already happened?
Thanks,
Suzanne

Hi All,
We have found out the Problem for the above issue.
The PREPARER_ID in the PO_REQUISITION_HEADERS_ALL table is coming as -1 which should not be. The user is linked to HR User and in FND_USER table we can see the employee id.
Can someone suggest on this if we have miss something.
Regards
Aryan

IProcurement Error : Approval List Incomplete

When I click Next on the Approvals Page in iProcurement during checkout, an error occurs 'Approval list incomplete,Please select a valid cost center manager to submit the requisition'. Please can anyone tell how to get rid of it? Thanks in advance.

Hi please check approval hierarchy. person who is creating the requisition that person have correct hierarcby.
For testing purpose, you give full amount access and check self approval.

Getting error while trying to get pending approval list from SOA server

Hi,
I have followed the steps mentioned in the following post to get the pending approval list from SOA server using java api's :
Using Java APIs for Oracle Human Workflows | Oracle Technologies Premier
But when I am running the java program I am getting the following error :
java.io.InvalidClassException: oracle.bpel.services.common.exception.ServicesException; local class incompatible: stream classdesc serialVersionUID = 1, local class serialVersionUID = -2263933888849127134
Please let me know how to solve this issue.
Thanks

You would need to spcify the JNDI path in a properties file or the like.
Suggestions here should help -
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial

Approval List Error when editing the charge account segments.

Hi All,
when i edit the charge account segments for purchase requisition approve through r12 iprocurement an error has occurred.
" An error has occurred in building your approver list. Please contact your system administrator. "
I think only it will occur when editing the segments occasionally but not consistently.
Because i tried for requisition second and third time with same account charge segments but there is no error occured.
Requisition completed for approve.
Please forward the suggested reply.
Thanks,
Praveen Kumar.

Does anyone have an answer to this question? I am having the same issue and applying patch 10102050 did not work.

Error while approving file programmatically

Hi All,
I am getting the following error while approving the file(.aspx) programatically which is in the pages library of a subsite in a sitecollection.
The file pages/abc.aspx has been modified by SHAREPOINT\\system on etc.,
Please help me regarding this issue.
Let me know if you have any queries?
Regards,
Kumar.

Hi Hemendra,
Thanks for your response.
Plz check the below code and let me know if you need any clarifications?
                SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite siteColl = new SPSite(strSiteChild)) // connectting to Sub site.
using (SPWeb Childweb = siteColl.OpenWeb())
SPList objList = Childweb.Lists["pages"];
SPDocumentLibrary objLib = null;
objLib = (SPDocumentLibrary)objList;
SPFolder rFolder = objLib.RootFolder;
SPFile objFile = null;
byte[] byteArr = null;
String fileName = System.IO.Path.GetFileName(strFile);
FileStream fileStream = File.OpenRead(strFile);
// Upload document ROW Research Teams
SPFile file = objLib.RootFolder.Files[Path.GetFileName(strFile)];
Childweb.AllowUnsafeUpdates = true;
file.CheckOut();
rFolder.Files.Add(fileName, fileStream, true);
file.CheckIn("Checkin by coding");
file.Publish("Published");
System.Threading.Thread.Sleep(1000 * 10);
file.Approve("Approved");
file.Update();
objLib.Update();
web.Update();
Childweb.AllowUnsafeUpdates = false;
Regards,
Kumar.

Document Contains Errors. Approval is not Possible.

I have a SC approval that errored out when coming back to SRM. We run RBBP_OFFLINE_EVAL program periodically throughout the day to pick up offline approvals from users. In the spool list, I see this message:
Document Contains Errors. Approval is not Possible. And the system gives me the WI ID, SC # and the object type BUS2121.
I've never seen such an error before. The document here...is it referring to the approval email itself? We instruct our users to not edit the approval email in any way. They just have to click on the approval link and click on Send in Outlook. I don't know if the document it's referring to is the SC or the approval email.
Can anyone help?
SN

Hi,
You are right. This error is the issue. To answer your other question why this message was not raised earlier;the problem could be that at the time of sc creation, there might be sufficient budget. But because your shopping cart was in approval for some time, it is possible that some more shopping carts have been raised with the same WBS and got approved. This would reduce the overall budget available. When the shopping cart is approved, one more check is done by the system and this time there was no sufficient budget.Hence the error is displayed. Only option for you now would be to ask FI people to increase budget or resubmit the cart by changing the value of the shopping cart.
Regards,
Sanjeev

Error in approving Request at Stage Security.

HI All,
error in approving request at stage security.Tried to paste system log but SDN site is not allowing to send the thread with the system log.
I can send the brief error description,help me out from this error.
application=XYZ,shortDesc=xyzzz,key=XYZ,description=XXXi,status=OPEN,selected=false,connector=true,riskAnalysisDone=false,cntClass=Production,applicationType=SAP,isProvisioned=false]]
2008-09-09 13:26:33,
getCustomFields(String reqNo) : : ,list size=0

Hi,
Could you tell me which version and support pack you are using that will help, make sure the person who is responsible for security stage must have AE Security role assigned.
Thanks,
Tavi

Hi, I keep getting this message: Creative Cloud attempted to access a secure website, Parental Controls restricts access to secure websites. To add this website to your approved list, click Add Website. To do this, you need an administrator password.

Hi, I keep getting this message: Creative Cloud attempted to access a secure website, Parental Controls restricts access to secure websites. To add this website to your approved list, click Add Website. To do this, you need an administrator password.
what is this? what password do i need?
I am trying to download Creative Cloud but it not working?

Tamaro34896425 the error message you have posted appears to be related to the settings of your security software. You can find guidance on how to configure software firewalls at Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html. You can find a link to the list of secure servers that the computer will need access to.

Error while doing listing

Hi,
I am getting error while doing listing. "Manual module selection and checking procedure not possible at present.
Please advise the resolution and root cause of the error.
Regards
prawmu

i clearly mentioned what was the error occured for me agian ur asking quetion means i can't tell m . i created an article in mm41 while doing the listing in wsm3 that time this error is occuring if u can solve i will be happy
thank u
rk

Access Enforcer(error in approving the request) and import roles

Dear all,
error in approving the request at security stage(last)
manager and role owner are successfully approved.
and also importing roles into access enforcer was not successful.
imortstatus : 0 roles imported of 28 records found.
please find the system log:
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.messaging.MessageFormatter : parseDesc :   : INTO the method : desc :Please specify a file to import.paramNames :paramsMap :{FIELD_NAME=#_!FIELD_NAME#_!}
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:02:28,234 [Thread-47] DEBUG

In Addition to my previous response:
I meant to include the following:
Some of the fields that need to be properly defined with attributes are:
       System: must have the know SAP system defined here
       Role Approver (i presently are using most of the roles without having need for approval; I created a user called NOAPPRV in AE)
       Functional Area: need to have all the areas defined that roles will be assigned to
       Company: I only have one company so that's an easy one
Some areas I presently do not use but found they must ne coded and coded properly:
       ResponsibilityID:   N/A (coded as is)
       CommentsMandatory: NO (coded as is)
       Parent Role Owner:   NO
       Business Process: NA (I believe I originally coded N/A and it did not like that)
       Sub Process: NA (again N/A I believe error on me)
       Reaffirm Period: presently I am using 0 (zero)
       LastReaffirm: presently using 12/31/9999
Hope this helps a bit
I wanted to include an attachment with a sample of my Role Import spreadsheet but I'm not sure exactly how to do that; if I figure that out or someone can provide me the process I will include it
Jerry Synoga
Ryerson Inc.
630-758-2021

Error while approving work item

Hi All,
I am getting error while approving a claim request; error is:
error while inserting claim record xxxxxxx in cluster for employee xxxxxxxx
This does not happen always, some time I am able to approve and sometime i got the error.
I am using same set of user ids and same perspnal nos; does this thing matters and causing this issue or this should not cause this problem.
Please advice!
Thanks and Regards,
Honey

Hi Honey,
Could you please check note number: 1374072 which is for the PY-IN-PS. I don't think that this warning message that you are seeing is applicable to the UWL or generated from the UWL component. Error messages like this are usually generated from the ABAP system and more specifically from the application area. Another hint would be to check ST22 to see if there is a short dump occuring in the backend system.
According to the note, this error will be thrown when:
"Error on Approver Screen stating "Error while inserting claim
record <Reference Number> in cluster for employee <Employee
Number>". This happens only when the approver tries approving the
request almost immediately after the employee has submitted the
request."
I hope that this information is helpful to you.
Regards,
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

How to get all the approver list for a particular transaction in iExpense

Is there any API to get all the approver list for a particular transaction in iExpense workflow after submitting an expense report?

Hi All,
Could anyone please let me know API to get all AME approvers in one go.
I am currently using below API to get approver list.
ame_api.getallapprovers (applicationidin => 201 , -- PO
transactionidin => l_document_id , -- req header id
transactiontypein => 'PURCHASE_REQ'
,approversout => l_appr_list
But if any of the approver is INACTIVE then API is going into exception and not showing all approvers. Requirement is like to show all approvers with their statuses (ACTIVE / INACTIVE).
Reply ASAP.

Duet has encountered an error during Approve , Reject Reassign the workflow

Hi,
We have implemented DUET with two scenario (LEMA & WOMA) in our organization. When try Approve , Reject or Reassign the Duet work flow Item Duet has encountered an error . The scenario was working fine earlier. Suddenly the error has start coming. The error is coming in a pop up window. I am attaching the error details from event log.
Event Type:     Error
Event Source:     Duet Diagnostics
Event Category:     None
Event ID:     0
Date:          1/04/2010
Time:          10:49:37 AM
User:          N/A
Computer:     xxxxxxxxxxx001
Description:
Error in Approve/Reject from Approver Mail.
Exception message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Method: Close
StackTrace:   at Microsoft.Office.Interop.Outlook._MailItem.Close(OlInspectorClose SaveMode)
   at SAP.Office.Apps.Leave.Outlook.LeaveApproverMailInspectorCodeBehind.AfterOnSelectControl(String name, String param)
     =====Additional Information=====
oba://oba.microsoft.com/outlook?boundItemId=
Bound Item ID:
Bound Item Type:
Correlation ID:
Process Name: C:\PROGRA1\MICROS3\Office12\OUTLOOK.EXE
User Name: xx\99901
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks in advance,
Monirul Islam

HI Monirul,
You can get better advice and help in another forum dedicated to Duet only.
Regards,
Sangvir

Application on approved list won't open

I am running a lab using the Mac OX Server (Leopard) and have had several problems with applications being on the "approved list" but not allowing the user to open them. iPhoto is one of them and the newest is a free program called TextWrangler. Students are logging in to their own hard drive, using the applications that are on the computer. These programs work when logged in to the computer, but not the server. A message always pops up saying the program is not on the approved list to contact the person who set it up. Can anyone help, please?

Kimberly, there are a couple of things you can try.
In Workgroup Manager, in your group preferences, under 'Applications' where you're managing what apps they can use, you can try adding the applications in question as if they were folders.
So by this I mean, where you see the tabs Applications|Folders, select folders and where it says "Allow applications within these folders" click the plus icon and navigate to the application in question as if it were a folder.
An application is basically a folder (there are a bunch of files inside it) but it doesn't behave like one when you double click it (instead it launches).
Once you have saved your preferences it would be a good idea to delete the managed preferences on the client machine before testing again.
These are located /Library/Managed Preferences/
(note that that is the main "Library" folder at the root of the Macintosh HD not a users Library folder.)
You can delete the whole "Managed Preferences" folder.
This folder temporarily stores the settings that are being sent to the client by the server so that they don't have to be downloaded each time a user logs in, and you're deleting it to be sure your new settings are being downloaded.
I have personally found that I 'do' need to sign my applications under some circumstances. Where are you using WorkGroup Manager? Are you using it on the server or are you using it on one of the client machines? If you're using WGM on the server to add applications, have you checked that the versions of the applications on the server are the same as on the client? Have you tried logging in as admin to one of the client machines, and using Workgroup Manger, adding the application directly from the client machine?
Sorry for the overly long post.
Message was edited by: Fridgemagnet

Error in Approver list

Similar Messages

Maybe you are looking for