Error in BPM Mapping step.

Hi,
I am getting error in one of the BPM mapping steps.
The error description is as below.
Work item 000000051017: Object CL_SWF_XI_MSG_BROKER method CALL_TRANSFORMATION cannot be executed
com/sap/xi/tf/_MM_BAPI_ERROR_RES_TO_AUDIT_RPT_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRun
Error handling for work item 000000050990
Runtime handle of object type could not be created
com/sap/xi/tf/_MM_BAPI_ERROR_RES_TO_AUDIT_RPT_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRun
This mapping works fine in design time.
Please let me know if you have info on this error.
Thanks
Katta

Hi Mohan,
Make sure you are using same message container when you pass and try to you send information on these abstract interface references in BPM with respective to the container references or Only use Transformation in BPM if it is realy necessary with n:1 or 1:n mappings otherwise try to put the transformation outside your BPM because monitoring mapping in BPM is very hard to monitor and it is very hard to do error resolving.
Thanks & Regards
Agasthuri Doss

Similar Messages

File BPM Webservice IDOC .........Error in BPM workflow(Sync send step)

Hi all,
I have the same type scenario that is file initiates the bpm that invokes the Webservice.the file data goes into bpm as the input data of the webservice and webservice gives the response and then the web-service response is mapped to
idoc and finally posted to R/3.
The interface sI created:
1.outbound Async -
>for file
2. Abstract async----
>bpm reciever step.
3.Abstract sync----
>bpm sync send step.
4.inbound sync -
>for the webservice to recieve the reqst and to send the response to Abstract sync
5.Abstract async----
>to send the data out of BPM
6.inbound async----
for idoc
created 3 communication channel.
1.file adapter: sender
2.SOAP adapter: Recv
3.IDOC adapter: Recv
created 3 reciever determination
Business process instance in ID
reciever agreement(2)
interface determaination
But getting a problem in BPM.
I think the scenario is logically correct as I have seen previous
SDN suggestions.
But getting the problem in BPM's sync step.and the SOAP rec channel is also inactive.in BPM workflow I can see the recv step is getting file req data but after that in the sync send step
its stuck up.getting error.
Please sir suggest me.

Remove the interface you created for Idoc that is inbound async one. use the imported Idoc itself as the interface and also as the message type. Everything else looks good though i did not really evaluate ur ID configuration..
VJ

Mapping Errors in BPM

Hi All,
How can the mapping errors in BPM be handeld implicitly (without the use of Exception Handling Branch)
Regards,
Anurag

Hi Anurag.
Handling the mapping exceptions in BPM could be possible using the Alerts.
Go through this blog for Alert Configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
And also go through this thread:
alert in BPM
Hope this helps you.
Regards,
Hari.

Handling Java Mapping Exception in BPM Transformation step

Dear SDN members,
I have developed a File to File scenario using BPM as follows.
Step 1:
Sender file adapter picks the file from FTP server and using file content conversion mapped to XML structure.
Step 2:
BPM will recieve the XML payload , immediately in the block a transformation step is called with an interface mapping. In the interface mapping a Java mapping will be executed with certain data validations on the XML payload. If found any invalid data is there a suitable excptions will be raised . Here the transformation step should be catch the error and control should be sent to exception block to place the recived file as a error file.
else if the transformation is executed with out any issues, the file will be placed in success folder.
But in the transformation step, though java mapping thorwing exceptions, the control not going into exception block, instead it is continuing to next step i.e the file is placing in the success folder.
Can anybody tell me, how to handle the exceptions raised in java mapping in the BPM transformation step?
I have refered all the SDN blogs, forums related to this issue, but could not able to find the answer. Please help me?
Thanks & Regards
Vijayanand Poreddy

Hi Abhishek,
Once the file is picked from FTP server then sent to BPM,
the BPM steps
Step1:
-->Recive
Step 2:
Block Starts
   ---Block Start: New Transaction
   ---Block End : New Transaction
   ---Exception : Error
Step 3
Inside the Block
Transformation Step
   --Interface Mapping: <IM Name>
   -- Check box ticked for Create New Transcation
   -- Exceptions
      --System Error: Error
   --Source Message: Message recieved in Recieve Step (Step 1)
Step 4:
--Send
--Source Maessage: Output message from the Transformation Step
Block End
Inserted a Exception Branch for Block
Steps inside Exception Branch
-Control
    --Throw Alert
   --Alert Name
In the above scenario
The transformation step is not throwing error even my interface mapping going to error. The same transformation step if i place outside the block next to recieve step, then the transformation step is throwing error and BPM stops the process.
Also, when transformation is inside the block, i have used the exception handling on the send step inside the block. here it is throwing error as the source message payload is empty. because in the preceding transformation step the interface mapping is failed due to which there the target will not be filled. But even though it is not entered into exception block.
Regards
Vijayanand Poreddy

BPM Mapping Error using JDBC adapter JDBC - SAP - JDBC

Hi
I am facing an issue in XI BPM in my QA system .
My scenario involves a JDBC sender adapter which calls an SQL in the legacy database , a BPM which process the SQL resultset and IDoc send from BPM to R/3.Once IDoc is send successfully to R/3 XI BPM sends a response back to legacy database.
There are 4 mapping transforations inside BPM.
First XI executes an SQL in the database and then transforms it using BPM steps.
I have not made any changes in the mapping or within BPM.
However since last week the BPM is failing . When I checked the error log I found out the error due to mapping transformation in one of the steps.
In fact XI fails to successfully map in that step.
The same BPM and mapping works fine in the Production system.
However when I manually tried to test the BPM and the mappings with Production payload in XI QA system it again failed.
I believe the message is failing not due to data problem.
I also tried by deactivating and reactivating the XI sender channel which calls the SQL in the database.
Then I tried by restarting all backgrounds jobs related to BPM.
Both apprpoaches failed.
I am getting the following error in transformation step.
<b>com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntimeException in Message-Mapping transformatio~</b>.
Any inputs will be very helpful and rewarded.
Thanks in advance.

Please provide more detailed exception trace.
Also, I have seen some cases where the imported/deployed classes simply disapeared!!!
I had to make dummy changes in all my message mappings and activate them in order to get them working.
Regards,
Henrique

Runtime Mapping step throws error

Good Morning All,
Recently we migrgated our XI server from Windows to Linux environment. after migration,We tried to test our interfaces,
No Interface are working, XI is getting the messages,In Runtime Mapping step it failed every interfaces due to error called "This program line cannot be accessed".
We tested four scearnios ,Every interface failed due to error,Kindly please suggest how can I am going approach here.
for your reference The trace error full description is:
<Trace level="1" type="T">Interface Mapping SCM001A1_SA_REQSAPLOG_AND_SAPDATAINSERTREQ_to_SIE_PG_1E_SD_SAP_2_SCM_DB</Trace>
<Trace level="1" type="T">This program line cannot be accessed</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.UnreachableException: This program line cannot be accessed at com.sap.aii.ibrun.server.mapping.StampPersistor.getCurrentStamp(StampPersistor.java:118) at com.sap.aii.ibrun.server.mapping.StampPersistor.getCurrentStamp(StampPersistor.java:69) at com.sap.aii.ibrun.server.mapping.MappingPool$MappingStamp.getCurrentStamp(MappingPool.java:382) at com.sap.aii.ibrun.server.mapping.pool.SynchronizedGlobalStamp.getCurrentStamp(Pool.java:155) at com.sap.aii.ibrun.server.mapping.pool.Pool.checkOut(Pool.java:50) at com.sap.aii.ibrun.server.mapping.MappingPool.checkOut(MappingPool.java:52) at com.sap.aii.ibrun.server.mapping.JavaMapping.load(JavaMapping.java:91) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:45) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor277.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy199.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor276.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:107) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:157) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</Trace>
Thank you very much,
Regards,
Sateesh

Hi All,
We raised the SAP call for this issue, They asked for the J2ee engine thread dump. We created the dump and sent to SAP people back. Now we are waiting the response from SAP people.
Mean while, Here I am sharing you our XI server J2EE engine thread dump below, Please share your ideas about this thread dump.
Unfortunately, here I am n't provide you the full thread dump. It was very huge.
Thread Dump:
stdout/stderr redirect
node name   : server0
pid         : 31861
system name : XQ1
system nr. : 10
started at : Mon Mar 14 14:40:57 2011
<?xml version="1.0" ?>
<verbosegc version="200902_24">
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /usr/sap/ccms/wily/logs/IntroscopeAgent.log (Permission denied)
     at java.io.FileOutputStream.openAppend(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:199)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:124)
     at com.wily.org.apache.log4j.FileAppender.setFile(Unknown Source)
     at com.wily.org.apache.log4j.RollingFileAppender.setFile(Unknown Source)
     at com.wily.introscope.agent.AutoNamingRollingFileAppender.setFile(AutoNamingRollingFileAppender.java:179)
     at com.wily.org.apache.log4j.FileAppender.activateOptions(Unknown Source)
     at com.wily.org.apache.log4j.config.PropertySetter.activate(Unknown Source)
     at com.wily.org.apache.log4j.config.PropertySetter.setProperties(Unknown Source)
     at com.wily.org.apache.log4j.config.PropertySetter.setProperties(Unknown Source)
     at com.wily.org.apache.log4j.PropertyConfigurator.parseAppender(Unknown Source)
     at com.wily.org.apache.log4j.PropertyConfigurator.parseCategory(Unknown Source)
     at com.wily.org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(Unknown Source)
     at com.wily.org.apache.log4j.PropertyConfigurator.doConfigure(Unknown Source)
     at com.wily.org.apache.log4j.PropertyConfigurator.configure(Unknown Source)
     at com.wily.util.feedback.backend.log4j.Log4JBackend.configureFromProperties(Log4JBackend.java:97)
     at com.wily.util.feedback.WilyLog4JConfigureAndWatchHelper.onChange(WilyLog4JConfigureAndWatchHelper.java:61)
     at com.wily.util.ConfigurationWatcher.addConfigurationListener(ConfigurationWatcher.java:147)
     at com.wily.util.feedback.AsynchFeedbackChannel.setConfiguration(AsynchFeedbackChannel.java:64)
     at com.wily.introscope.agent.enterprise.EnterpriseAgent.setAgentFeedbackConfiguration(EnterpriseAgent.java:551)
     at com.wily.introscope.agent.enterprise.EnterpriseAgent.loadLogConfiguration(EnterpriseAgent.java:513)
     at com.wily.introscope.agent.enterprise.EnterpriseAgent.doPostConstructionInitialize(EnterpriseAgent.java:201)
     at com.wily.introscope.agent.runtime.java.enterprise.Java2EnterpriseAgent.doPostConstructionInitialize(Java2EnterpriseAgent.java:32)
     at com.wily.introscope.agent.ACommonAgent.postConstructionInitialize(ACommonAgent.java:237)
     at com.wily.introscope.agent.AgentShim.doCreateDelegate(AgentShim.java:590)
     at com.wily.introscope.agent.AgentShim.createDelegate(AgentShim.java:501)
     at com.wily.introscope.agent.AgentShim.getDelegateAgent(AgentShim.java:471)
     at com.wily.introscope.agent.AgentShim.ProbeBuilderEntryPoint_initializeAgentShim(AgentShim.java:711)
     at com.wily.introscope.api.autoprobe.IntroscopeAutoProbeImpl.<init>(IntroscopeAutoProbeImpl.java:35)
     at com.wily.introscope.api.autoprobe.IntroscopeAutoProbeFactory.createIntroscopeAutoProbe(IntroscopeAutoProbeFactory.java:163)
     at com.wily.introscope.autoprobe.connector.AutoProbeConnector.internalLoadAutoProbeAdapter(AutoProbeConnector.java:135)
     at com.wily.introscope.autoprobe.connector.AutoProbeConnector.loadAutoProbeAdapter(AutoProbeConnector.java:155)
     at com.wily.introscope.autoprobe.connector.AutoProbeConnector.getAutoProbeAdapter(AutoProbeConnector.java:173)
     at com.wily.introscope.autoprobe.connector.AutoProbeConnector.addProbes(AutoProbeConnector.java:204)
     at java.lang.ClassLoader.defineClass(ClassLoader.java)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:147)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:477)
     at java.net.URLClassLoader.access$500(URLClassLoader.java:111)
     at java.net.URLClassLoader$ClassFinder.run(URLClassLoader.java:849)
     at java.security.AccessController.doPrivileged(AccessController.java:279)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:373)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:627)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:442)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:593)
<af type="nursery" id="18" timestamp="Mar 14 14:43:36 2011" intervalms="11997.910">
<minimum requested_bytes="184" />
<time exclusiveaccessms="0.107" />
<nursery freebytes="0" totalbytes="313206784" percent="0" />
<tenured freebytes="1650623016" totalbytes="1728053248" percent="95" >
    <soa freebytes="1564220968" totalbytes="1641651200" percent="95" />
    <loa freebytes="86402048" totalbytes="86402048" percent="100" />
</tenured>
<gc type="scavenger" id="18" totalid="18" intervalms="11999.543">
    <flipped objectcount="902865" bytes="77828496" />
    <tenured objectcount="43204" bytes="2969152" />
    <refs_cleared soft="130" weak="80" phantom="0" />
    <finalization objectsqueued="887" />
    <scavenger tiltratio="75" />
    <nursery freebytes="234315312" totalbytes="315141120" percent="74" tenureage="9" />
    <tenured freebytes="1646084472" totalbytes="1728053248" percent="95" >
      <soa freebytes="1559682424" totalbytes="1641651200" percent="95" />
      <loa freebytes="86402048" totalbytes="86402048" percent="100" />
    </tenured>
    <time totalms="40.434" />
</gc>
<nursery freebytes="234313264" totalbytes="315141120" percent="74" />
<tenured freebytes="1646084472" totalbytes="1728053248" percent="95" >
    <soa freebytes="1559682424" totalbytes="1641651200" percent="95" />
    <loa freebytes="86402048" totalbytes="86402048" percent="100" />
</tenured>
<time totalms="42.493" />
</af>
================================================================================
JVMDUMP006I Processing Dump Event "user", detail "" - Please Wait.
JVMDUMP032I JVM requested Java dump using '/usr/sap/XQ1/DVEBMGS10/j2ee/cluster/server0/javacore.20110316.130003.32060.0004.txt' in response to an event
JVMDUMP010I Java Dump written to /usr/sap/XQ1/DVEBMGS10/j2ee/cluster/server0/javacore.20110316.130003.32060.0004.txt
JVMDUMP013I Processed Dump Event "user", detail "".
<af type="nursery" id="239" timestamp="Mar 16 13:01:58 2011" intervalms="263309.652">
<minimum requested_bytes="56" />
<time exclusiveaccessms="0.168" />
<nursery freebytes="0" totalbytes="366089216" percent="0" />
<tenured freebytes="1137630384" totalbytes="1728053248" percent="65" >
    <soa freebytes="1051228336" totalbytes="1641651200" percent="64" />
    <loa freebytes="86402048" totalbytes="86402048" percent="100" />
</tenured>
<gc type="scavenger" id="239" totalid="239" intervalms="263310.415">
    <flipped objectcount="328811" bytes="39659864" />
    <tenured objectcount="1662" bytes="236744" />
    <refs_cleared soft="2164" weak="5661" phantom="0" />
    <finalization objectsqueued="6154" />
    <scavenger tiltratio="87" />
    <nursery freebytes="326992280" totalbytes="368861184" percent="88" tenureage="14" />
    <tenured freebytes="1136712880" totalbytes="1728053248" percent="65" >
      <soa freebytes="1050310832" totalbytes="1641651200" percent="63" />
      <loa freebytes="86402048" totalbytes="86402048" percent="100" />
    </tenured>
    <time totalms="37.310" />
</gc>
<nursery freebytes="326990232" totalbytes="368861184" percent="88" />
<tenured freebytes="1136712880" totalbytes="1728053248" percent="65" >
    <soa freebytes="1050310832" totalbytes="1641651200" percent="63" />
    <loa freebytes="86402048" totalbytes="86402048" percent="100" />
</tenured>
<time totalms="38.244" />
</af>
================================================================================
dump stack trace : Wed Mar 16 13:02:44 2011
================================================================================
JVMDUMP006I Processing Dump Event "user", detail "" - Please Wait.
JVMDUMP032I JVM requested Java dump using '/usr/sap/XQ1/DVEBMGS10/j2ee/cluster/server0/javacore.20110316.130244.32060.0005.txt' in response to an event
JVMDUMP010I Java Dump written to /usr/sap/XQ1/DVEBMGS10/j2ee/cluster/server0/javacore.20110316.130244.32060.0005.txt
JVMDUMP013I Processed Dump Event "user", detail "".
Thank you,
Sateesh

Mapping step failed in BPM: IllegalInstanceException

Hi Experts,
I have implemented a BPM scenario which includes a transformation step. This step refers to a operation mapping which involves two mapping programs (1st mapping pogram to convert from message type A -> message type B and second mapping program which converts message type B -> message type C this uses RFC lookup too). On exceuting BPM; the process is stuck at this mapping step and Step history details are as follows:
com/sap/xi/tf/_MM_BPM_DEBMDM_ADRMAS_RFC_LOOKUP_DE~com.sap.aii.mappingtool.tf7.IllegalInstanceException
detailed log:
com/sap/xi/tf/_MM_BPM_DEBMDM_ADRMAS_RFC_LOOKUP_DE~com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ADRMAS03. Values missing in queue context. Target XSD requires a ~
However this same operation mapping when used without BPM works.
Kindly advice.
Thanks and Regards,
Elizabeth.

Hi Sandeep,
Already tried this using the actual payload. On observing the BPM logs -> Container variables I saw that the input message generated for the second level mapping is of incorrect messgae structure.
The mapping should have generated ADRMAS03 message but somehow it is generating ADRMASBS message.
The mapping program uses ADRMAS03 only as message type, but I cannot figure out why using BPM it is generating ADRMASBS (which is not even defined/creted in ESR).
Pls advice,
Thanks,
Elizabeth

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Error in BPM with multimapping.

Hi,
I've got next error in a transfromation step of bpm with multimapping :
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://www.miquello.com/C3900 IM_I3934_REPLICA_BBY , Software Component Version 931D4B005DF711DFC0CACC330A640786</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type JAVA , Program com/sap/xi/tf/_MM_I3934_REPLICA_BBY_</Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload</Trace>
<Trace level="3" type="T">Mapping has exactly one source message</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Executing multi-mapping</Trace>
<Trace level="1" type="T">while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' Thrown: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' at com.sap.guid.GUID.parseHexGUID(GUID.java:1046) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:127) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:140) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.GeneratedMethodAccessor804.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1098.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)</Trace>
</MappingTrace>
However i've tested with same input message in Operation Mapping ESR, without any error.
What could be the cause?
Thanks, in advance.
Carme.

Hi,
Are you using parameterized mapping or RFC lookup in your mapping???? If yes, please make sure that you are passing the parameter in the interface determination instead of null value.
Also verify whether your cache is updated with the latest GUID of your mapping program or not.
Regards,
Priyanka.

Problem with BPM Receive step

Hy all,
I have a strage Problem with a BPM Definition into a receive step. I receive from SAP System IDoc and (per dynamic receive determination) I receive it into BPM.
But the Block that contains the receive Step can't be executed. I get following error message from XI :
Error when executing work item '000000177354'
Error when starting work item 000000177354
Work item 000000177345: Object FLOWITEM method EXECUTE cannot be executed
Error when executing work item '000000177354'
Runtime handle of object type could not be created
Exception 'ex_EDIFactOrder_received' caught and transferred to the exception handler
Error when executing work item '000000177354'
Could anyone help me please.
Thank's a lot.
Mat

I have following scenario :
Block 1
1) Infinite Loop with receive step
2) exception creation (2 minutes) (parallel to 1))
3) exception handler (parallel to 1))
Block 2
1) Mapping steps + send Steps + container Operation steps (set of flag)
2) Exception handler (paralle to 1))
Block 3
1) receive steps (where I get the error message)
I hope it's OK
Cheers
Mat

Handle system errors in BPM

I'm working on a BPM that may fail to perform some steps due to system errors. I can raise an exception if that happens, but what I'd like to do in the exception branch is to build a response message to the calling application that starts the BPM, declaring the reasons of the error. I can do that giving a generic "system error" description, but I'd like to be more precise, and access the system error cause itself and add it to the message description.
Is this possible? How to make it?
Thanks in advance.

Hi,
As per my knowledge we can raise System errors using Send step and Transformation Step.I dont think we can rise System errors using Control step.Control Step handles only Exceptions not System errors.(Confirm once).
But if you want to rise System errors go for Send Step Synchronous or Asynchronous.
Send Step Synchronous used when exception triggered by permanent system errors that occur in the pipeline or while transporting the message to or from the pipeline.Asynchronous Send Step:the exception will only be triggered if an error occurs during the transfer to the pipeline. Errors that occur during mapping in the pipeline, do not trigger an exception.
Transformation step used when to rise Permanent System error occurs.
Regards,
Raj

Sync/Async brdige error in BPM

Hi,
I am working on RFC-TO-Webservice scenario(Synchronous) and I am using the BPM in this scenario.
In BPM just I have used 2 steps.
Receive - Opened Sync/Async bridge
Send - Synchrouns step
Send - Cloase the Receive step
Send - Asynchrous send step (to send the response to the file...).
When I sent my RFC message from R/3 I am getting following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I am using PI 7.0 SP13 is why I am not able to receive the Sync message in BPM...I have created the abstract interface based on RFC...getting the first message itself Timeout error.
I am trying to use Sync/Asnc bridge in BPM. First message itself PL_TIMEOUT error..bpm is not able to receive my rfc request...
I need help on this...do I need to do any settings in WEBAS level..I did Timeout setting in SXMB_ADM.
Regards,
Venu.

hi,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
check this blog..and same thing I did in my scenario
my scenario is RFC-TO-Webservice.
Sync/Async bridge can't we use like this ...Receiver step(open sync/async)-> Send(Synchronous)-Send(Close sync bridge)....that way can't we use ...
I am not able to receive the RFC request itself inside my BPM first step...getting the Timeout error.
But when I use the RECEIVE STEP with Asynchronous mode..I am able to receive the message inside my bpm.Incase of Synchronous I am not able to receive the message..
I am working PI 7.0 and SP13..did any body worked this version...
Thanks,
venu.

Error in FunctionalAcknowledgement mapping of seeburger

Hello,
I am using the seeburger adapter for processing the EDI orders and Ack for the ANSI 850 EDI message.
I am able to get the XI messages in the monitor ,but it resulting in the error at mapping step
I am getting the below mapping error after testing the mapping using payload under test tab
Runtime exception during processing target field mapping /LIST/S_ISA/D_I12. The message is: Exception:[java.lang.RuntimeException: CounterBeanServlet: Could not call nextCounter() method of the Servlet. Cause=java.net.ConnectException: Connection refused: connect] in class com.sap.xi.tf._FunctionalAcknowledgement_to_A_997_ALL_ method setCounter$[ISA, OWENS_MINOR, com.sap.aii.mappingtool.tf3.rt.Context@6c690c]
I think this is the default mapping provided by seeburger ,what might be the problem any idea
I know some connection exception error but what is the remedy for the same
Rajesh

Hello Prateek,
I have checked the imported archives and seen SeeFunctionsXI and in UDF all needed imports are there and calling method nextCount() is also there
I am getting exception has Cause=java.net.ConnectException: Connection refused: connect]
When i check the proprties file in SeeFunctionsXI ConnectionFactory.properties i have found the below entry
provider.servlet.server=http://localhost:50000/
Do we need to provide Server name here instead of local host ?? (just guessing ,if yes how do we do that,direct export and import)
Thanks
Rajesh

BPM problems on PI (XI 7.0) - internal error - Does BPM work in PI for you?

Hi guys!
This is the 2nd time I get into the troubles with BPM on PI. On XI 3.0 I had never problems. But on PI when I use BPM I get following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Es ist ein interner Fehler aufgetreten</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
SAP:Stack tag means in english: An internal error has occured.
My scenario is:
Idoc sent from R/3
Mapping to Integration Process (BPM) inbound interface format
Message receiver in Int Proc (start of BPM)
sync call to web service (inside Int Proc)
web service response sent out from BPM (end of BPM)
mapping of ws response to target structure (idoc)
Idoc sent to r/3
I don't know, what could be wrong. In SXI_CACHE I have return code 0 for this Integration Process, so it should be ok.
Any ideas? Does BPM work in your PI environment?
Thanx a lot foro help!
Olian.

hi,
>>>>Any ideas? Does BPM work in your PI environment?
of course it does
it might mean that your installation was not done properly (or XI configuration during installation) but it has nothing to do with BPM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

Error in BPM Mapping step.

Similar Messages

Maybe you are looking for