Error in Creating schema

Hi,
I'm trying to install Oracle webcenter poratl by following the below linked mentioned
As per the guide am trying to create schema,, am getting the error mentioned below
Error: Oracle Initialization Parameter 'PROCESSES' is too low.
Cause: The Oracle Initialization Parameter 'PROCESSES' must be at least 200.
Action: Change the Database Initialization Parameter 'PROCESSES' to 200 or more, then rerun RCU.
I changed the processes=200 in init.ora file & restarted the DB 11g..
Still facing the same error while creating schema.
Any one familiar with this kinda issue.
Thanks,
AR

Hi ,
Please check the output of the following sql command :->
SQL>show parameter process;
Check if Value for processes is more than desired value.
If using spfile , you can change it as :->
SQL>ALTER SYSTEM SET processes=300 SCOPE=SPFILE;
Thanks

Similar Messages

Error when create schemas for webcenter using URM.

Hi,
I use Oracle Urm to create necessary schemas for Webcenter. Everything goes well when I create the tables.
However, when I extend my domain with Webcenter, comes to the database connection testing step, the tests always fail.
It said: A connection is establish but no result received from the Test query.
I ignored the test but then later, start the WLS_Spaces manage server, the server can't start because of database error, the needed tables not found.
I use SQl Developer to connect to the database but can't see those newly created tables.
But during the URM step, nothing went wrong.
Can you help me with this?
Thank you very much.

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Create schema command error

Hi,
I tried to execute the following statement but was given the error.
1 CREATE SCHEMA AUTHORIZATION ashish
2 CREATE TABLE paint
3 (paint_id NUMBER PRIMARY KEY,
4 paint_size NUMBER,
5 colour VARCHAR2(10) )
6* GRANT select ON paint TO ashish
SQL> /
CREATE SCHEMA AUTHORIZATION painter
ERROR at line 1:
ORA-02421: missing or invalid schema authorization identifier
What is the error in this statement for not alllowing me to crate the schema?
This is 11g database.
Thanks,
Aashish

Hi,
It must be the same as the current schema.
LEGATTI@ORACLE10> show user
USER is "LEGATTI"
LEGATTI@ORACLE10> create schema authorization legatti
2 create table t1 (id number)
3 create table t2 (id number)
4 create table t3 (id number)
5 ;
Schema created.Cheers
Legatti

I'm trying to create a list using CustomSchemalXml property in ListCreationInformation object in CSOM. But, the code throws an error "Invalid List Schema".

I'm trying to create a list using CustomSchemalXml property in ListCreationInformation object in CSOM. But, the code throws an error "Invalid List Schema". Any pointers on how to set the CustomSchemalXml property?
Sri

Hi Lakshmanan,
Thanks for your reply.
I checked this post and there was no solution to the problem there. I undersand we cannot create a list based on custom template in CSOM, but what I'm looking for is how of form xml and set it to CustomSchemalXml
property, so that everytime when I want to create a list with similar content types and stuff, I can just set the
CustomSchemalXml property.
Sri

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Error while creating new crosstab using

I am getting the following error while creating a new crosstab object within Swing application. This error has started coming after we applied Oracle patch 9206 on database. The error originates from one of the classes in the olap_api_92.jar.
==========================================================
Wed Feb 02 09:13:51 CST 2005 In BuilderWizardValidateAdapter::wizardValidatePage
oracle.express.idl.util.OlapiException: No more data to read from socket
     at oracle.express.idl.ExpressOlapiDataSourceModule.DefinitionManagerInterfaceStub.crtCurMgrs2(DefinitionManagerInterfaceStub.java:927)
     at oracle.express.olapi.data.full.DefinitionManagerSince9202.createOLAPICursorManagers(DefinitionManagerSince9202.java:611)
     at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManagers(ExpressDataProvider.java:1325)
=========================================================
Please check the BIcheckconfig output. It does not show any errors.
=========================================================
<?xml version="1.0" encoding="UTF-8" ?>
<BICheckConfig version="1.0.2.0">
<Check key="JDEV_ORACLE_HOME" value="C:\Mohan\Installs\Jdev904"/>
<Check key="JAVA_HOME" value="C:\Mohan\Installs\Jdev904\jdk"/>
<Check key="JDeveloper version" value="9.0.4.0.1419"/>
<Check key="BI Beans release description" value="BI Beans 9.0.4 Production Release"/>
<Check key="BI Beans component number" value="9.0.4.23.0"/>
<Check key="BI Beans internal version" value="2.7.5.32"/>
<Check key="host" value="db03schgefage"/>
<Check key="port" value="1521"/>
<Check key="sid" value="biolapp"/>
<Check key="user" value="nairs5"/>
<Check key="Connecting to the database" value="Successful"/>
<Check key="JDBC driver version" value="9.2.0.4.0"/>
<Check key="JDBC JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\patches"/>
<Check key="Database version" value="9.2.0.6.0"/>
<Check key="OLAP Catalog version" value="9.2.0.6.0"/>
<Check key="OLAP AW Engine version" value="9.2.0.6.0"/>
<Check key="OLAP API Server version" value="9.2.0.6.0"/>
<Check key="BI Beans Catalog version" value="N/A; not installed in nairs5"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\ext"/>
<Check key="OLAP API Metadata Load" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="569"/>
<Check key="Number of metadata dimensions" value="5"/>
<Check key="OLAP API Metadata">
<![CDATA[==============================================================================
Type Name (S=Schema, C=Cube, M=Measure, D=Dimension)
========= ====================================================================
Folder... ROOT
Folder... Auto Claim Measures
Folder... Service Measures
Folder... Claim Counts
Folder... Cell Summary Cube
Folder... Actual Measures
Measure.. Actual Acceptance Rate
Measure.. Actual Annualized Bill amt
Measure.. Actual Application Count
Measure.. Actual Avg Annual Billing
Measure.. Actual Contacts Count
Measure.. Actual Commission Amt
     at oracle.express.olapi.data.full.ExpressDataProvider.internalCreateCursorManager(ExpressDataProvider.java:680)
     at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManager(ExpressDataProvider.java:586)
     at oracle.olapi.data.source.DataProvider.createCursorManager(DataProvider.java:268)
     at oracle.dss.dataSource.QueryUtilities.setUpCursors(QueryUtilities.java:559)
     at oracle.dss.dataSource.QueryServer._setUpCursorsForMainQuery(QueryServer.java:7039)
     at oracle.dss.dataSource.QueryServer._getCursorForCube(QueryServer.java:4098)
     at oracle.dss.dataSource.QueryServer._updateCube(QueryServer.java:4055)
     at oracle.dss.dataSource.QueryServer._applySelections(QueryServer.java:2661)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.dss.util.Operation.execute(Operation.java:69)
     at oracle.dss.dataSource.OperationQueue.update(OperationQueue.java:68)
     at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
     at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
     at oracle.dss.dataSource.QueryServer.queueOperation(QueryServer.java:7076)
     at oracle.dss.dataSource.QueryServer.applySelection(QueryServer.java:2192)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.dss.util.Operation.execute(Operation.java:69)
     at oracle.dss.dataSource.QueryManagerServer.sendQueue(QueryManagerServer.java:1549)
     at oracle.dss.dataSource.common.OperationQueue.update(OperationQueue.java:198)
     at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
     at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
     at oracle.dss.dataSource.common.OperationQueue.addOperation(OperationQueue.java:127)
     at oracle.dss.dataSource.client.QueryClient.applySelection(QueryClient.java:970)
     at oracle.dss.dataSource.common.QueryQueryAccess$SelCursor.getDataAccess(QueryQueryAccess.java:1133)
     at oracle.dss.dataSource.common.QueryQueryAccess.getDataAccess(QueryQueryAccess.java:278)
     at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:639)
     at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:705)
     at oracle.dss.datautil.QueryAccessUtilities.getValues(QueryAccessUtilities.java:608)
     at oracle.dss.queryBuilder.QueryBuilderUtils.getSelectedMeasures(QueryBuilderUtils.java:623)
     at oracle.dss.queryBuilder.SelectedItemsPanel.populateTree(SelectedItemsPanel.java:298)
     at oracle.dss.queryBuilder.SelectedItemsPanel.refreshTree(SelectedItemsPanel.java:333)
     at oracle.dss.queryBuilder.SelectedItemsPanel.setActive(SelectedItemsPanel.java:366)
     at oracle.dss.queryBuilder.ItemsPanel.setActive(ItemsPanel.java:251)
     at oracle.dss.datautil.gui.DefaultBuilderDialog.setActive(DefaultBuilderDialog.java:1072)
     at oracle.dss.datautil.gui.DefaultBuilderDialog.validateNextPreviousEvent(DefaultBuilderDialog.java:1396)
     at oracle.dss.datautil.gui.DefaultBuilderDialog$BuilderWizardValidateAdapter.wizardValidatePage(DefaultBuilderDialog.java:2113)
     at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
     at oracle.bali.ewt.wizard.WizardPage.validatePage(Unknown Source)
     at oracle.dss.datautil.gui.CustomImageWizardPage.validatePage(CustomImageWizardPage.java:81)
     at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
     at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
     at oracle.dss.datautil.gui.CustomWizard.doNext(CustomWizard.java:415)
     at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
     at java.awt.Dialog$1.run(Dialog.java:540)
     at java.awt.Dialog.show(Dialog.java:561)
     at java.awt.Component.show(Component.java:1133)
     at java.awt.Component.setVisible(Component.java:1088)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
     at oracle.dss.datautil.gui.DefaultBuilderDialog.runDialog(DefaultBuilderDialog.java:489)
     at oracle.dss.datautil.gui.DefaultBuilderDialog.run(DefaultBuilderDialog.java:466)
     at oracle.dss.queryBuilder.QueryBuilder.run(QueryBuilder.java:2401)
     at gecf.pmg.PmgBiOlapApp.newCrosstabWiz(PmgBiOlapApp.java:1622)
     at gecf.pmg.PmgBiOlapApp.mNewCrosstab_ActionPerformed(PmgBiOlapApp.java:1563)
     at gecf.pmg.PmgBiOlapApp$5.actionPerformed(PmgBiOlapApp.java:696)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

I suspect that you have either not fully applied the patch or alternatively the patching process did not complete.
If you are using an analytic workspace, connect as OLAPSYS account and run the following commands:
exec CWM2_OLAP_METADATA_REFRESH.MR_REFRESH
exec CWM2_OLAP_METADATA_REFRESH.MR_AC_REFRESH
If this does not resolve the error, and assuming your system worked prior to applying the 9206 patch, then the patch may need to be reapplied.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

Error while Creating form on remote Database

Hi All
I m getting error while creating form on remote database thru
Database link
Line/Column Error
7099/21 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7099/9 PL/SQL: SQL Statement ignored
7749/16 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7749/9 PL/SQL: SQL Statement ignored
and statement at line specified is insert statement. and at end
of insert statement Returning caluse is there as follows
RETURNING ROWID INTO "_ROWID";
This returning clause is causing error. Does anybody knows how
to handel it??
Thanks
Yogesh

Yogesh
I haven't seen the ora-03116 problem.
What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
data database: D grants to P (local schema) on table T
public syn T = D.T (sys) (get the right schema)
portal dbase : public db link to data database connecting as P
public syn T = T@dblink (sys) (over the link)
P is a schema created in both databases.
Test is: P in portal dbase can "select * from T" and gets the right data.
I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
Hope this helps
Greg

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Error while creating persistence manager

Folks,
I have been receiving the following error while trying to invoke a subprocess in a flowN (the subprocess wraps some logic around a stored procedure call). There error is appearing N-1 times consistently (only one of the four transactions I'm testing is going through).
<remoteFault>
<part name="code" >
<code>Server.userException</code>
</part>
<part name="summary" >
<summary>when invoking endpointAddress 'http://crmoasdev.XXXX.com:7778/orabpel/CDH_inbound/XXXX_CDH_in_ProcessRewards/1.0', ORABPEL-05226 Error while creating persistence manager. An error occurred while attempting to instantiate the persistence manager class "org.apache.log4j.helpers.ISO8601DateFormat__CXBD" for type "org.apache.log4j.helpers.ISO8601DateFormat". The exception reported was: </summary>
</part>
<part name="detail" >
<detail>AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: faultString: ORABPEL-05226 Error while creating persistence manager. An error occurred while attempting to instantiate the persistence manager class "org.apache.log4j.helpers.ISO8601DateFormat__CXBD" for type "org.apache.log4j.helpers.ISO8601DateFormat". The exception reported was: faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}hostname:crmoasdev.XXXX.com </detail>
</part>
</remoteFault>The domain log information is as follows:
<2006-05-17 15:18:24,666> <WARN> <CDH_inbound.collaxa.cube.engine.deployment> <TypeHelperLoader::getBizdocVersionUID> missing resource: java.util.MissingResourceException: Cant find resource for bundle com.oracle.bpel.client.i18n.resources_client, key LOG_W_BD_out_of_date_class
<2006-05-17 15:18:24,675> <ERROR> <CDH_inbound.collaxa.cube.engine.deployment> <TypeHelperRegistry::generatePersistenceManager> Error while creating persistence manager.
An error occurred while attempting to instantiate the persistence manager class "org.apache.log4j.helpers.ISO8601DateFormat__CXBD" for type "org.apache.log4j.helpers.ISO8601DateFormat". The exception reported was:
<2006-05-17 15:18:24,675> <ERROR> <CDH_inbound.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube engine": Error while creating persistence manager.
An error occurred while attempting to instantiate the persistence manager class "org.apache.log4j.helpers.ISO8601DateFormat__CXBD" for type "org.apache.log4j.helpers.ISO8601DateFormat". The exception reported was:
ORABPEL-05226
Error while creating persistence manager.
An error occurred while attempting to instantiate the persistence manager class "org.apache.log4j.helpers.ISO8601DateFormat__CXBD" for type "org.apache.log4j.helpers.ISO8601DateFormat". The exception reported was:
     at com.collaxa.cube.engine.deployment.TypeHelperLoader.generatePersistenceManager(TypeHelperLoader.java(Compiled Code))
     at com.collaxa.cube.engine.deployment.TypeHelperLoader.loadPersistenceManager(TypeHelperLoader.java(Compiled Code))
     at com.collaxa.cube.engine.deployment.TypePersistenceRegistry.getPersistenceManager(TypePersistenceRegistry.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.getPersistenceManager(PersistenceService.java(Inlined Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.List__CXPM.prepareToSave(List__CXPM.java(Compiled Code))
     at com.collaxa.cube.engine.persist.Vector__CXPM.prepareToSave(Vector__CXPM.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.Map__CXPM.prepareToSave(Map__CXPM.java(Compiled Code))
     at com.collaxa.cube.engine.persist.Hashtable__CXPM.prepareToSave(Hashtable__CXPM.java:41)
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.DefaultPersistenceMgr.prepareToSave(DefaultPersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.types.bpel.CXMessageVariable__CXPM.prepareToSave(CXMessageVariable__CXPM.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.persist.BaseScope__CXPM.prepareToSave(BaseScope__CXPM.java(Compiled Code))
     at com.collaxa.cube.engine.persist.Scope__CXPM.prepareToSave(Scope__CXPM.java(Compiled Code))
     at com.collaxa.cube.engine.core.PersistenceService.prepareToSave(PersistenceService.java(Compiled Code))
     at com.collaxa.cube.engine.enc.ScopeContextSerializer.serializeContext(ScopeContextSerializer.java(Compiled Code))
     at com.collaxa.cube.engine.enc.ScopeContextSerializer.toBin(ScopeContextSerializer.java(Compiled Code))
     at com.collaxa.cube.engine.adaptors.common.BaseCubeInstancePersistenceAdaptor.store(BaseCubeInstancePersistenceAdaptor.java(Compiled Code))
     at com.collaxa.cube.engine.adaptors.oracle.CubeInstancePersistenceAdaptor.store(CubeInstancePersistenceAdaptor.java(Compiled Code))
     at com.collaxa.cube.engine.data.CubeInstancePersistenceMgr.store(CubeInstancePersistenceMgr.java(Compiled Code))
     at com.collaxa.cube.engine.CubeEngine.store(CubeEngine.java(Compiled Code))
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java(Compiled Code))
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java(Compiled Code))
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java(Compiled Code))
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java(Inlined Compiled Code))
     at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.syncCreateAndInvoke(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java(Compiled Code))
     at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java(Compiled Code))
     at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java(Inlined Compiled Code))
     at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java(Compiled Code))
     at com.collaxa.cube.ws.soap.providers.CXSOAPProvider.processBPELMessage(CXSOAPProvider.java:632)
     at com.collaxa.cube.ws.soap.providers.CXSOAPProvider.invoke(CXSOAPProvider.java:133)
     at org.collaxa.thirdparty.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.collaxa.thirdparty.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.collaxa.thirdparty.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.collaxa.thirdparty.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:450)
     at org.collaxa.thirdparty.apache.axis.server.AxisServer.invoke(AxisServer.java:285)
     at org.collaxa.thirdparty.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java(Compiled Code))
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at org.collaxa.thirdparty.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java(Compiled Code))
     at com.collaxa.cube.fe.CollaxaServlet.service(CollaxaServlet.java(Compiled Code))
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:568)
<2006-05-17 15:18:24,803> <WARN> <CDH_inbound.collaxa.cube.engine.deployment> <TypeHelperLoader::getBizdocVersionUID> missing resource: java.util.MissingResourceException: Cant find resource for bundle com.oracle.bpel.client.i18n.resources_client, key LOG_W_BD_out_of_date_classThanks for your help,
Joseph

hmmm what was the usecase ...
was it after deployment, or just after new installation? this looks like a defect on loading side .. other axis stuff running around?
at least it's good to hear that you are up & running now :-)
/clemens

Error while creating the HTTP client with destination GB_DPSRetrieve

Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
Kishore

Hi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar

Oracle Discoverer 11g Error to create a new public connection

Hi,
Since i have install a new Discoverer 11g, i got this error.
A connection error.
- error while creating the session, check for other errors.
- oracle.discoiv.connections.ConnectionStoreException: While trying to lookup 'jdbc.disco_pstore' didn't find subcontext 'jdbc'. Resolved ''
- While trying to lookup 'jdbc.disco_pstore' didn't find subcontext 'jdbc'. Resolved ''
- While trying to lookup 'jdbc.disco_pstore' didn't find subcontext 'jdbc'. Resolved ''
unable to retrieve connection list
- Cannot retrieve connection list. Check the Discoverer application log for more details.
The installation is an stand-alone without OID but i know why - jdbc looking to the metadata of the pstore.
The database schemas are created and populated by RCU by i cannot use the STAND ALONE mode.
Cheers
Edited by: unsolaris on 7-Apr-2012 5:14 PM

Thank you for your hint, but ...
In Metalink there are no results for me.
This is my metalink address:
https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=PROBLEM&bmDocDsrc=KB&bmDocTitle=Repository%20Assistant%20Fails%20With%20%22ORA-00942:%20table%20or%20view%20does%20not%20exist%22%20In%20Workspace%20Creation&viewingMode=1143&bmDocID=557067.1))
Do you have another address?
Thank you
Regards
Siegwin

Error : Catalog object schema validation failed in OBIEE 11.1.1.5

Hi all ,
Facing the below error while accessing few reports present in a folder (Voice Tab) . But , able to access other reports present in the same folder .
Catalog object schema validation failed: /users/weblogic/sayak/TPLAN reports/Voice Tab/Net revenue per minute (ILD\/NLD)
Error Details
Error Codes: AGFIXBO2:EIRWWH9E
Location: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threads
Also while try to edit the analysis (Net revenue per minute (ILD\/NLD) from catalog , i am getting the above error .The Reports were fine till yesterday , What could be the issue ?
Thanks

Hi Devarasu ,
Yeah .. I'm aware of this bug of 11.1.1.5 , but I'm puzzeled by the sudden impact of it . i.e , It didn't gave me the error while creating/editing the file yesterday and looked fine on dashboard as well .
However , If there's no alternative other than applying patch , then please let me know the patch ID .
And applying this patch means , just overwriting some configure files in the OBIEE home folder sructure ? or somthing else ?
Thanks

Error while creating application

Hi,
I am getting the following error while creating the application.
"IHspAppAssistantACM_SaveAppAssistant() Error
Unable to Create application FirstApp.
Error Number: 2147024891"
No other application is existing with this name.
I checked the HspEventLog... the following listed in it:
Information*16*ns36225*01/09/08 11:53:17*CHspDataSourceImp.cpp*Line 378*Entering CreateApplication: FirstApp*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3255*Could not retrieve planning version*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3326*Could not retrieve product release*
Information*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 3397*Could not retrieve product CSS Version*
Error*16*ns36225*01/09/08 11:53:19*CHspDSSQL.cpp*Line 217*Version & Release not found*
Information*16*ns36225*01/09/08 11:53:19*CHspDataSourceImp.cpp*Line 394*CreateApplication: Deleting old schema*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 408*CreateApplication: Recreating security tables*
Information*16*ns36225*01/09/08 11:53:20*CHspDataSourceImp.cpp*Line 437*CreateApplication: Creating Essbase application*
Information*16*ns36225*01/09/08 11:53:31*CHspDataSourceImp.cpp*Line 495*CreateApplication: Creating new schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 574*CreateApplication: Initializing schema*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 642*CreateApplication: Creating plantypes*
Information*16*ns36225*01/09/08 11:53:32*CHspDataSourceImp.cpp*Line 754*CreateApplication: Creating application owner user*
I am using the following credentilas:
Essbase Server login : admin
SQl Server login: admin
Windows NT login: ns36225
We are using Planning 9.2 version and Planning Desktop for creating the applications.
please help me.
Thanks in advance.
null

Hi,
I had set up CSS Properties file and as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hic-pcs27303:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
<native name="Native Directory" />
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
</css>
I got the problem. it is with DCOM account. I am adding a user in my LAN network, after clicking apply it taking the user in System account not in the domain account. e.g: I logged into my Sys(no: hst-pcs5424) with ABC domain, added a user ns36225 in this domain. During application setup it is looking for DCOM account in hst-pcs5424 account not in my ABC domain. So i need to add a user to the system account that should work without the LAN netwrok. But now my user account won't work with LAN.

Error in Creating schema

Similar Messages

Maybe you are looking for