Error in Crystal

Hello Sir,
I am using Web Application and using Crystal Rpt . When Crystal Report OPens it gives me an Error as:
The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
Please solve this issue ...

Post Author: V361
CA Forum: Data Connectivity and SQL
Just at a quick look, you have lots and lots of inner joins. Could you create a query in Access that gives you the data you want, then report off that query (or view)

Similar Messages

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Multi Value Parameter in SP error in Crystal Report SAP B1 ?

Hi Experts ,
i am Getting an error in Crystal Report
"Failed to retrieve data from the database. Details: 42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '('. [Database vendor code: 120]"
I an executing the SP In Command , I want to pass multi value parameter in SP
When Pressing ok
than On Ok Button Error come
So I have Some Question
1> Why All parameter in Commend Are Automatic getting Compulsory and How to Avoid It?
2> How to Solve this error ? this error is only coming with multivalued parameter ?
i have many report in which i have to send the multi value parameter into query it self so , Plz Help Me
I am New to Crystal Report so it will be Kind Of you if explain with example .
Thankks in Advance !!!
Regards,
Mayank Shah

Hi Shachar,
i will explain one because i think some thing is misunderstood
please the images
when all parameter record selected and no parameter record selected ... i want all record should display
this blank report is problem
Regards,
Mayank Shah

Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

Error deploying Crystal Report XI R2 to Enterprise - Failed to read parameter object.
I know this issue has been addressed several times and the solution recommended was to install Service Pack 2. I have done that. It started working for me too; however recently I got some error saying some UDF***.DLL is missing. I re-installed Crystal Reports XI R2 and Service Pack 2. Unfortunately though, this error is back. I have restarted the machine n number of times but keep on getting this error.
My report file has dynamic parameters defined through command object (SQL Query). My understanding is that once I publish the report to BoE Enterprise, BO will create LOVs and BV's in the repository. Now that is not happening.
has any one else had this issue before and resolved it?
Thanks

Hi,
do you export your CR report in your BOBJ repository using an account with administrator rights?
Regards,
Stratos

Malloc error in Crystal reports

1. Several reports are receving a Malloc Error in Crystal.
2. Several reports are receiving Database Connection error or Failed to Open Connection error when scheduled in Business Object but the reports run fine in Crystal.
3. Several reports run successfully in Business Objects but export no data
Any advice on any of these issues would be greatly appreciated. Thanks.

Moved to BOE Admin forum.
Check the error on the failed object. may give you an indication why other than failed to connect.

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Error with Crystal 2008 Exporting MS Excel using ReportExportFormat.MSExcel

Hi


I am using the sample code that comes with the Eclipse plug-in. I have modified it slightly to also write to different formats and then display in the viewer. I am able to write to all formats except to the MSExcel (MSExcel data only works without issue)



I am using the following code (this is just proof of concept code)
 //jtds connection and database logon setup already
 //report parameters etc setup already
 try
 {
 String file_name = reportClientDocument.displayName() + System.currentTimeMillis();
 file_name = file_name + ".xls";
 String location = "c:
temp
";
 FileOutputStream fos = new FileOutputStream(location + file_name);
 
 ByteArrayInputStream byteArrayInputStream;

 byteArrayInputStream = (ByteArrayInputStream) reportClientDocument
 .getPrintOutputController().export(ReportExportFormat.MSExcel);

 byte[] byteArray = new byte[1024];
 int bytesRead;
 while((bytesRead = byteArrayInputStream.read(byteArray)) != -1) 
 {
 fos.write(byteArray, 0, bytesRead); 
 }

 fos.flush();
 fos.close();
 setReportSource ();
 }



Console/Error Output:
Crystal Reports Viewer 12.0.0.0
java.vendor = Sun Microsystems Inc.
java.version = 1.5.0
os.name = Windows XP
os.version = 5.1
os.arch = x86
log4j:WARN No appenders could be found for logger (com.crystaldecisions.reports.formatter.formatter.lightmodel.cellmodel.FCMCellModel).
log4j:WARN Please initialize the log4j system properly.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: IllegalArgumentExceptionWithMessage---- Error code:-2147467259 Error code name:failed
 at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:237)
 at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:147)
 at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:128)
 at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(SourceFile:111)
 at com.businessobjects.samples.SampleViewerFrame.showReport(SampleViewerFrame.java:145)
 at com.businessobjects.samples.SampleViewerFrame.showViewer(SampleViewerFrame.java:98)
 at com.businessobjects.samples.SampleViewerFrameClient.main(SampleViewerFrameClient.java:17)
Caused by: com.crystaldecisions.reports.common.GeneralException: IllegalArgumentExceptionWithMessage
 at com.crystaldecisions.reports.exporters.excel.libs.escher.p.<init>(SourceFile:149)
 at com.crystaldecisions.reports.exporters.excel.libs.escher.BlipChecksumGenerator.a(SourceFile:47)
 at com.crystaldecisions.reports.exporters.excel.libs.escher.ad.a(SourceFile:93)
 at com.crystaldecisions.reports.exporters.excel.libs.escher.af.a(SourceFile:186)
 at com.crystaldecisions.reports.exporters.excel.libs.escher.EscherDocumentForExcel.a(SourceFile:119)
 at com.crystaldecisions.reports.exporters.excel.libs.escher.EscherDrawingSheetForExcel.a(SourceFile:283)
 at com.crystaldecisions.reports.exporters.excel.libs.biff.xlsDOM.ExcelWorksheet.a(SourceFile:251)
 at com.crystaldecisions.reports.exporters.excel.formatter.cm.ExcelCMGraphicsObjectFormatter.a(SourceFile:167)
 at com.crystaldecisions.reports.exporters.excel.formatter.Excel97ExportFormatter.a(SourceFile:193)
 at com.crystaldecisions.reports.exporters.excel.formatter.Excel97ExportFormatter.a(SourceFile:169)
 at com.crystaldecisions.reports.exporters.excel.formatter.Excel97ExportFormatter.a(SourceFile:110)
 at com.crystaldecisions.reports.exporters.excel.Excel97Exporter.processFormattedContent(SourceFile:213)
 at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:104)
 at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:247)
 at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:642)
 at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586)
 at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636)
 at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
 at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
 at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
 at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
 at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
 at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337)
 at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(SourceFile:223)
 ... 6 more
Any help will be greatly appreciated, this seems as if its a bug though.

Edited by: Kabir Bray on Nov 2, 2010 4:26 PM

I know this has been marked as answered, but I would just like to mention when designing reports for Excel output, the key thing
to remember is the design and layout of your report. You have to work on a strict grid layout concept, and make sure all items are
lined up 100% else columns or rows are inserted in strange places, making the output look very ugly. But if you can line everything
up nicely then I believe any report that can be displayed in Excel.
Keeping in mind that if the report is to be output as Excel the whole design and logic must be geared for this, so page headers
and footers are no longer relevant, in fact the whole "page" concept must be ignored when working with Excel as there are
no pages in a spreadsheet application like Excel.
That all being said, I dont know what your reports are about and am not saying they are not too complex for Excel,
just wanted to make a note so that people dont think Excel output using CR4E is a bad option.

How to Resolve Join Syntax Errors in Crystal Reports 11.5

Weu2019re upgrading form Crystal Reports Runtime Client 10.0 to 11.5. I have a registry fix that resolves the join syntax errors in Crystal Reports 10.0 by updating the registry key:
[HKEY_LOCAL_MACHINE\Software\Crystal Decisions\10.0\Crystal Reports\Database\QueryBuilder\JoinBuilder]
"SQLServerJoinBuilder"="adbc"
What is the fix for Crystal Runtime 11.5?

Create a new key under:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Database\QueryBuilder\JoinBuilder and add the values
"SQLServerJoinBuilder"="adbc"

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Temporary error "A Crystal Reports job failed because a free license ..."

Hi all,
We coded with VS 2003 a .NET 1.1 application which using the Crystal Report 9 Redistribution package .NET ready to display reports from measured data from our device. The data is stored in a SQL Server 2000 MSDE. Crystal Report has his own DB connection to the SQL server to read the data to display the report.
Our application runs well on approx. 100 distributed installations. But on six customers installation we get this error. Actual on two customers PCs using the same DB we get the error "A Crystal Reports job failed because a free license could not be obtained in the time allocated.". This error pop up every time, when the report is shown. Although the report get shown completely.
I observed in the 'Windows Event Viewer => "System" log after the above-mentioned error following entry "Crystal Report job was delayed 2 (sec)." once for every time when the user requested a report.
I restored an empty DB on customers PC and the error don't pop up anymore.
All CR .NET assemblies have the version 9.2.3300.0. I tested also the "CrystalReportNET_keycodefix.zip", but it doesn't help. I had checked for hours all the issues about this error message on the internet. I tested the most fitting solutions, but not one fix the problem.
I tested customers full DB on my Virtual Machine with same installation, but I don't get the error.
Cheers
Ronny

Hi Ludek 
 
Thanks for your answer. I checked all the things you asked me to do on both system. 
 
Here are the results from my investigations: 
 
1) The keycode.dll was not on the not working PC. 
I copied it to the root of C: as on the working PC. I registered it with regsvr32.exe and tested the issue. 
=> The problem still exist. 
 
 
 
2) I compared the keycode on both system: 
HKLM\SOFTWARE\Crystal Decisions\9.0\Crystal Reports\Keycodes\CR Ent 
 
non working PC: 
1 AAP50-GS00000-U7000RN 131203342 3979604006 
The code is different in comparison to the working PC, because I carried out the 'CrystalReportNET_keycodefix.zip'. Before this I made an export of the above registry key. Afterwards I wasn't able to merge this export (backup) again with the registry. I assume due to the included carriage returns in the keycode. 
 
working PC 
1 XXXXX 
 
 
 
3) I used the Process Monitor and got following error during the error sequence: 
 
I list only some key entries from the hundreds of error entries. Please inform me, how I can provide you the full logger files. 
 
non working PC: 
WriteFile C:\...\Administrator.QCNIR002\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKLM\Software\Policies\Microsoft\Windows NT\DnsClient NAME NOT FOUND 
 
But I observed beside the results: No more entries, Name not found, Fast IO Disallowed, Buffer overflow (RegQueryKey) and Range not locked (UnlockFileSingle of printer driver) no other errors. 
 
 
working PC 
Operation: Path: Result: 
WriteFile C:\...\Administrator\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
 
 
 
4) Service Packs 
We could only compare the file size of the Merge Module we used with the one you provided me in the above link. 
 
<table border=0 cellpadding=0 cellspacing=0>
<tr>
<td>file name</td>
<td>file size of used Merge Module</td>
<td>file size of SP1 Merge Module</td>
</tr>
<tr>
<td width=150>crnetruntime.msm</td>
<td width=100>4'764'672 Byte</td>
<td width=100>4'770'304 Byte</td>
</tr>
<tr>
<td>license.msm</td>
<td>578'048 Byte</td>
<td>578'048 Byte</td>
</tr>
<tr>
<td>reportengine.msm</td>
<td>10'701'824 Byte</td>
<td>10'905'088 Byte</td>
</tr>
</table>
 
But I tried to install SP7 on my PC and on customers PC, but I got following error after I accepted the license agreement in the setup.exe: titlebar of window 'Information', Msg: 'Failed to create Backup folder -110' and just a button 'OK'. I got into an infinit loop and I could only end the process: 'IKernel.exe'. 
Remark: I get the same error with SP5 and SP6. 
 
 
 
5) Modules - comparison of DLL's 
 
I cross checked all the DLL in Modules, which begin with CR and some other, because there were over 100 DLL's. 
 
<table x:str border=0 cellpadding=0 cellspacing=0 width=834 style='border-collapse:
collapse;table-layout:fixed;width:626pt'>
<col width=385 style='mso-width-source:userset;mso-width-alt:14080;width:289pt'>
<col width=179 style='mso-width-source:userset;mso-width-alt:6546;width:134pt'>
<col width=110 style='mso-width-source:userset;mso-width-alt:4022;width:83pt'>
<col width=80 span=2 style='width:60pt'>
<tr height=17 style='height:12.75pt'>
<td height=17 width=385 style='height:12.75pt;width:289pt'>CRHEAPALLOC.DLL</td>
<td width=179 style='width:134pt'>9.2.0.2</td>
<td width=110 style='width:83pt'>9.2.0.2</td>
<td width=80 style='width:60pt'></td>
<td width=80 style='width:60pt'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRPE32.DLL</td>
<td>9.2.3.1183</td>
<td>9.2.3.1183</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRQE.DLL</td>
<td>9.2.1.625</td>
<td>9.2.1.625</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRTOWORDS_EN.DLL</td>
<td>9.2.0.14</td>
<td>9.2.0.14</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.CRYSTALREPORTS.ENGINE.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTAPPSERVER.CLIENTDOC.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTSOURCE.DLL</td>
<td>9.3.9500.7</td>
<td>9.3.9500.7</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.SHARED.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.WINDOWS.FORMS.DLL</td>
<td>9.3.9500.12</td>
<td>9.3.9500.12</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALKEYCODELIB.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>keycode.dll</td>
<td>9.0.0.281</td>
<td>9.0.0.281</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCE.DLL</td>
<td>2.81.1135.0</td>
<td>2.81.1135.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCER.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADO15.DLL</td>
<td>2.81.1128.0</td>
<td>2.81.1128.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADRH15.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSCORLIB.DLL</td>
<td class=xl26>01/15/09 22:31:34</td>
<td class=xl26>7/7/08 13:39</td>
<td class=xl24></td>
<td class=xl25></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>sqlresld.dll</td>
<td>2000.80.382.0</td>
<td>2000.080.0382.00</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>crdb_ado.dll</td>
<td>9.2.1.542</td>
<td>9.2.1.542</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
</table>
 
Please specify the more detailed, if you mean the Crystal framework files or the .NET files. Could you give me please the location of the framework dlls and database client dlls like a folder name, so that I can check also all of them. 
 
I can provide you also the Module logger files, if you require them. 
 
 
I would appreciate your further help very much. 
 
Cheers 
 
Ronny
Edited by: Ronny S. on Jul 6, 2009 4:57 PM
Edited by: Ronny S. on Jul 6, 2009 5:02 PM
Edited by: Ronny S. on Jul 6, 2009 5:17 PM
Edited by: Ronny S. on Jul 8, 2009 11:44 AM
Edited by: David Hilton on Jul 15, 2009 11:04 AM
Removed private keycode.

HTML View Error in Crystal Report 2008 Designer

Hi,
I am getting an Error when i am trying to see the HTML Preview on the Crystal Report Designer. but, It is working Properly From CMC.
I was getting the following Error.
"Failed to access the HTML Server Page
Contact your system administrator and make sure the BOE servers are running properly/
Also make sure that the default viewer URL is set Properly in the CMC of BOE
You can set the Default Viewer URL by following Steps
1) Log into the CMC
2) Clicl the APpplication Link.
3) On the applications page Select CMC, CLcik the Manage menu, A=and Select Processing Settings.
4) In the set default viewerURL, the URL Should be similarto the fllowing:
http://[hostname]:[portnumber]/OpenDocument/Opendoc/OpenDocument.jsp?sIDType=CUID&IDocID=O%SI_CUID%"
Kindly let me know how to resolve this issue. It was working properly. Thanks for your support in advance.
Regards
Shiva,

It is still an issue for me. I have a new install and am using WebElements to improve my reports. I am new to 2008 Server (OEM version) so it's probably something very basic. When I do a submit it shows a path of:
BOE/OpenDocument/Opendoc/OpenDocument.jsp?sIDType=CUID&IDocID=O%SI_CUID%
I don't even have a BOE folder. My setting as instructed on the page is correct. I have tried making changes but then the HTML preview doesn't even load the 1st page. That leads me to believe that the link is correct regardless of what debug says. Unlike other posts I have seen, my pages do not work in InfoView. After hitting submit I get:
http//servicedeskcrs:8080/OpenDocument/opendoc/openDocument.jsp?sType=rpt@sDocName=Resolution%20Report.rpt&lsSSelect1=1
Notice that there is no : after http. I have a feeling it is in a setting somewhere but I can't find it.

Crystal Reports XI - ERROR closes Crystal Reports Entirely

Post Author: crdev
CA Forum: Data Connectivity and SQL
Our company recently purchased Crystal Reports XI. We had previously used Crystal Reports 8 and had great success using it. Our problem is that when creating a new report using CR XI after selecting our ODBC datasource and inputing our username and password crystal reports generates an error and closes entirely. There is not an error code or error description either. Our datasource connects to a secured Access database with a database password set. This same datasource worked great using CR 8. Has anyone else had this problem? If so, did you find a solution?

Tim,
If you have previous versions of Crystal Reports try removing them. As well check that there are no Business Objects or Crystal Decisions folders under C:\Program Files and that there are no Registry keys for Business Objects or Crystal Decisions in HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER > Software. (*Back up the Registry before editing)
If you are trying to install from a CD or network drive copy the contents of the install package to the local machine.
Ensure you are logged on as Administrator and that Antivirus and AntiSpam ware are disabled.

Error in crystal report

Hi,
I am getting an error while I try to run a crystal report with Stored proc. I was running fine, except I added one new paramaeter in stored proc. The error is "Cannot Determine the quries to get the date for this report" . the SP is runninmg fine, please help me.

you need to verify the database to pull in the new sp data.
if that doesnt do it. disconnect from the server you are logged into in crystal
then set your datasource to the sp again. then verify. that usually works for me.

Error in Crystal Reports Runtime for VS 2008

Hi, everyone...
I have an app that have some reports.
On my DevMachine, works fine. But when I deploy in ServerMachine (Windows Server 2003 R2 64), the app fails when I try to access a page that have a Crystal Report component.
Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 800736b1.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 800736b1.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x800736b1): Retrieving the COM class factory for component with CLSID {5FF57840-5172-4482-9CA3-541C7878AE0F} failed due to the following error: 800736b1.]
   CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +207
[TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.]
   CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0
   test.Page_Load(Object sender, EventArgs e) +999
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
I tried so many things, such as verify permissions, change registry and other stuff, without success.
I have installed on my server machine, the correctly (I think) version of Crystal Runtime
Please help me!
Thanks..

Yes..
The app pool is running as 32bit... and the OS is 64bit..
Actually, there is something that can help..
Before this error appear (800736b1),
other error (800002ad UNKNOWN.RPT) was appearing...
After that I filled the property "TempDir" in the registry with a directory that had enough permissions,
the (800736b1) began to show.
Maybe you have the answer for this error (unknown.rpt)...
I already read the document (UNKNOWN Crystal Reports for .NET Troubleshooting the Background Processing Error Message),
but nothing in this document worked for me.
Edited by: lukinha on Jun 20, 2011 6:29 PM

Internal error publishing Crystal report to BOE 3.1

Trying to add a Crystal report to a BOE 3.1 server, via a JSP page, but it keeps failing with an internal error. Currently I am using code that came directly from a published example, but the jsp always fails when it gets to the boInfoStore.commit.
Current error message is
An internal error occurred. An error was encountered. A description of the error
is as follows:
com.crystaldecisions.sdk.occa.managedreports.reportadd.internal.b: Adding
Crystal Report "TestUpload.rpt" failed. An internal error occurred.
I searched extensively and found people with similar errors due to version errors in required jar files, but I have checked extensively and I am sure all the jar files are in sync with the server, which is 3.1 SP6.
When I take the exact same java code and copy it into a program object, I can run it successfully, it just won't run when called from jsp. Any suggestions?
A copy of the test jsp page is attached.

Hello Benjamin,
Please try the attached sample to publish a crystal report to enterprise.
Convert the attached text file to JSP & do the necessary changes in the sample & if you want you can also add multiple crystal report path from your local disk in the code to publish in the enterprise in one go.
Hope this help.
Thanks,
Shailendra

Error in Crystal

Similar Messages

Maybe you are looking for