Error in Data Extraction - Urgent
Hi,
I am getting the following error while extracting master data for 0INFO_REC.
Value '000000000000101034 ' for characteristic 0MATERIAL is in
external format
Thanks
Hi Shiva,
Unfortunately I dont access to my BW system today. So I do not know the exact conv routine for 0MATERIAL.
You can instead try this: Go to the transfer rules and for the 0MATERIAL info-object check the check-box for Conversion. Then retry the load.
Hopefully it should work.
Bye
Dinesh
(Do not forget to assign points!!).
Similar Messages
-
Error in data extraction for 0TCT_DS22
Hi All .
I am facing issue in data extraction for 0TCT_DS22 , its giving message 'error in source system ' and also giving a dump
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 24.05.2010 11:22:53
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
As per following thread i updated the table but still data load is failing ( Our system is at EHP1)
DataSource 0TCT_DS22 not extracting Data
Any pointers what could be the solution for this data load failure .
Thanks.Hi Neetika,
This type of error occures due to lack of memory in server or no process is available for request process.
Please refer below forum.
Re: Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Have you done any custom coding? if yes then check the loop.. endloop statement. (not closing loop)
Thanks & Regards,
Ashish -
Hi all,
I getting following error while extracting data from R/3.
1 LUWs confirmed and 1 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 503 records
Result of customer enhancement: 503 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 503 records
Result of customer enhancement: 503 records
Asynchronous sending of data package 000001 in task 0002 (1 parallel tasks)
Through selection conditions, 0 records filtered out in total
tRFC: Data package = 000001, TID = AC10033853994554E73BF620, duration = 00:00:06, ARFCSTATE =
tRFC: Begin = 11.11.2006 01:55:19, End = 11.11.2006 01:55:25
Lock table overflow
Job cancelled
I am extracting data for FI line items.
Please help me out....
Regards,
Viren.hi,
when i gave * as queue name.. there is one queue BW5000FI_AR_4.
Cl. Queue name Destination Entries Status 1. Date 1.Time NxtDate NxtTim Wait for queue
500 BW5000FI_AR_4 BP1CLNT500 1 NOSEND 11.11.2006 01:50:50 11.11.2006 01:50:50
Actually my deltas are not working from 11th. So can you tell me what to do now ??
What is the impact of deleting LUWs and will i get the data of 12th and 13th.
Regards,
Viren.
Message was edited by:
Virendrasinh Rana -
RFC to JDBC Scenario ( Error in Date Transformation ) Urgent!!!
HI All,
I am trying a RFC to JDBC scenario where I am taking date from SAP in SAP Format i.e. 'yyyyMMdd' & sending this to oracle DB Where the format is 'MM/dd/yyyy'.
In Runtime Workbench I am getting Following error: 'java.sql.SQLException: ORA-01843: not a valid month'.
Also when I am testing that source message in message mapping source date is converting to some other date at receiver side.
Can anybody help me on this.
Thanks & Regards,
AnkurHi Suraj,
I am using the datetrans function of graphical mapping for doing the transformation. I have specified the source format as 'yyyyMMdd' & the target format as 'MM/dd/yyyy'.
I have checked the input & output XML structure, but still i am getting the same error of Not a valid Month.
Value of date I am passing is '2006-05-17' & the output I get is '05/12/2005' in Message mapping test using the XML which we are getting from SAP in MONI.
Regards,
Ankur -
Hi SAP Guru,
Can someone please tell me how i can extract old data (year 2007)
sales order of "wxyz" sales org , of "abc" customer , of "xyz" material .
Points will be awarded.
Thank you in Advance.
Best RegardsHi Panki,
What type of data you want to extract from the system
1. If you want to take the list of Sales Orders for year 2007, based on customer, sales org and Material
use T.Code VA05 and give all the inputs, then you will get thelist of sales orders.
2. If you want to take the header information or Item information for the list of sales orders for year 2007
Use T.Code SE16
Table VBAK (Sales Document Header information)
Table VBAP (Sales Document Item Information)
You can give all the information which you want to give and give the time peirod in Created on field and execute the same.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen -
Error in Data Extraction for Asset Accouting Data Source
Hi all,
We have install the new flow of the Asset Accounting i.e 0FI_AA_20 data source. We are trying to load the data in BW. The problem is the volume of data is so high. Around 35 lacs records.
I am getting below error while loading in the BW.
"Error 7 when sending an IDoc"
"No more storage space available for extending an i 3 "
Please suggest..
Regards,
Macwan James.Hi Macwan James,
Not only the requests from DS to which you are loading data. You can delete the requests from other DS--> manage screens also if they are no longer required.
Or else use selection screen of Infopackage to load the data. Change the selections & try to load the data.
Hope it helps!
Regards,
Pavan -
Open data extraction orders - Applying Support Packs
Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NKThe exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests. -
SPAM/SAINT - Open Data Extraction Requests
Hello All i am getting an warning during implementing patches for netweaver 701 sp3 and sp4.
" Phase CHECK_REQUIREMENTS: Explanation of Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in the SAP Notes 1081287,
1083709 and 328181.
Call the Customizing Cockpit data extraction transaction and process all "
i checked listed note and implemented the same but still its showing me something in LBWE. i deleted all setup data for all the application data using tcode LBWG but its still showing in LBWE tcode.
this is the error i am getting after runing program 'RMCEXCHK'
Struct. appl. 04 cannot be changed due to setup table -> Long text
Message no. MCEX141
Diagnosis
Changing the extract structure for application 04 is not permitted, because the restructure table MC04P_0ARBSETUP for the extractor still contains data in 800.
You cannot change the structure in this status, because when you load an InfoPackage from BW, this leads to errors.
Procedure
Delete the entries for all restructure tables for application 04.
Any reply will be highly appreciated.
ManiHi Mani
I am also facing the same issue. Can you please tell me how you have resolved the issue.
Thanks & Regards
Venkat -
R/3 SP Import:Open data Extraction requests Error
We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh SThanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help... -
Personnel Data Iview Error (It's very Urgent)
Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.Hi Ashutosh Gulkhobre,
I coppied the dump from the ST22.
Now please tell me solution fro this error ?
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 27.06.2007 09:54:55
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
"HRXSS_PER_CLEANUP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ptgsap10"
Network address...... "192.168.1.18"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PTGSAP10"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 2090448
Heap.... 0
Page.... 0
MM Used. 1208256
MM Free. 880672
User and Transaction
Client.............. 001
User................ "ESS_USER1"
Language Key........ "E"
Transaction......... " "
Program............. "SAPLHRXSS_PER_MAC"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 700
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "HRXSS_PER_CLEANUP"
Call Destination.... "ptgsap10_EC6_10"
Source Server....... "EPSAND1"
Source IP Address... "192.168.1.36"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
"HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 13
of the (Include) program "LHRXSS_PER_MACU04".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
line
1 of the (Include program "LHRXSS_PER_MACU04 ".
Source Code Extract
Line SourceCde
1 FUNCTION hrxss_per_cleanup.
2 *"----
3 ""Local interface:
4 *" EXPORTING
5 *" VALUE(MESSAGES) TYPE BAPIRETTAB
6 *"----
7
8 * CALL METHOD mac_adapter->cleanup
9 * IMPORTING
10 * messages = messages.
11
12 * TRY.
>>>>> CALL METHOD xss_adapter->cleanup
14 .
15 * CATCH CX_HRPA_VIOLATED_ASSERTION .
16 * ENDTRY.
17 IF NOT xss_adapter2 IS INITIAL.
18 CALL METHOD xss_adapter2->cleanup.
19 ENDIF.
20
21 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 13
SY-DBCNT 30
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070627
SY-UZEIT 095455
SY-XPROG SAPLHRXSS_PER_MAC
SY-XFORM HRXSS_PER_CLEANUP
Active Calls/Events
No. Ty. Program Include Line
Name
4 FUNCTION SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 13
HRXSS_PER_CLEANUP
3 FORM SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 1
HRXSS_PER_CLEANUP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 4 Ty. FUNCTION
Name HRXSS_PER_CLEANUP
MESSAGES
Table[initial]
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
XSS_ADAPTER2
F0000000
F0000000
No. 3 Ty. FORM
Name HRXSS_PER_CLEANUP
SYST-REPID
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_%_MESSAGES
Table[initial]
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
3000
SY-XPROG
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_SPACE
2
0
0
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
3000
Internal notes
The termination was triggered in function "method_call_iref"
of the SAP kernel, in line 2203 of the module
"//bas/700_REL/src/krn/runt/abmethod.c#7".
The internal operation just processed is "METH".
Internal mode was started at 20070627095455.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=24080)
When : 6/27/2007 9:54:55.565
Threads : 2
Computer Name : PTGSAP10
User Name : SAPServiceEC6
Number of Processors: 2
Processor Type: x86 Family 6 Model 11 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 6cd0
eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0549c640=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:27f2ac53=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 6408
eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0770fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:2a19e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 11.04.2005 09:27:15 21504 E
1 Prg SAPLHRXSS_SER_AUTHORITHY_CHECK 1 13.02.2005 19:00:30 16384 E
2 Prg SAPLASTAT_TRIG 2 09.09.2004 14:18:33 13312 E
3 Typ ASTAT_TYP2 0 10.11.1998 05:35:18 2048
4 Typ ASTAT_TYP1 0 30.11.1998 15:54:16 2048
5 Prg SAPLSAUTHTRACE 5 07.03.2005 08:51:05 57344 E
6 Typ USOBHASH 0 02.07.2003 13:15:24 3072
7 Prg SAPLSECH 7 05.07.2005 13:10:18 26624 E
8 Typ CVERS 0 09.11.2000 14:05:49 2048
9 Prg SAPLHRXSS_PER_MAC 9 10.02.2004 14:21:15 49152 E
10 Prg CX_SY_REF_IS_INITIAL==========CP 10 05.07.2005 13:10:16 10240 E
11 Typ SCX_SRCPOS 0 18.05.2004 14:07:11 2048
12 Prg CX_DYNAMIC_CHECK==============CP 12 05.07.2005 13:10:16 10240 E
13 Prg CX_ROOT=======================CP 13 05.07.2005 13:10:16 11264 E
14 Prg CX_NO_CHECK===================CP 14 05.07.2005 13:10:16 10240 E
15 Prg CX_SY_NO_HANDLER==============CP 15 05.07.2005 13:10:16 10240 E
16 Typ SYST 0 09.09.2004 14:18:12 31744
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00004612
\0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
246 FUNC 03 0020 LHRXSS_PER_MACU03 1
247 PAR2 02 0000 001B C000 LHRXSS_PER_MACU03 1
249 FUNC 13 0003 LHRXSS_PER_MACU03 1
250 PAR2 01 0000 0011 C001 LHRXSS_PER_MACU03 1
252 FUNC FF 0000 LHRXSS_PER_MACU03 1
253 ENDF 00 0000 LHRXSS_PER_MACU03 1
254 -
00 0000 LHRXSS_PER_MACU03 1
255 STCK 02 C001 LHRXSS_PER_MACU03 1
256 CPOP 00 0000 LHRXSS_PER_MACU03 1
257 -
00 0000 LHRXSS_PER_MACU03 1
258 FUNP 3E 0000 0011 8000 0000 8000 0000 0000 LHRXSS_PER_MACU04 1
262 FUNP 80 0000 0000 0000 0000 0000 0000 0000 LHRXSS_PER_MACU04 1
>>>>> METH 03 0000 0000 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 13
270 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 13
272 CMPS 20 024B 001B 001B LHRXSS_PER_MACU04 17
274 BRAF 05 0007 LHRXSS_PER_MACU04 17
275 METH 03 0000 0001 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 18
279 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 18
281 FUNE 00 0000 LHRXSS_PER_MACU04 21
282 -
00 0000 LHRXSS_PER_MACU04 21
Thanks and Regards,
Phanikumar -
Error in Data Transfer Process (DTP) Urgent!
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nipsPlease do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent! -
'Error 8 occurred when starting the data extraction program'
Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KPHi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM -
Invalid data status error during the data extraction
Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
DhanushSir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors. -
Hi Gurus,
We are doing HR data extraction with the following details:
Cube: 0PT_C01 - Time and Labor
data source: 0HR_PT_1 - Times from personal work schedule
Records in ECC: 15mill +.
"Init load with Data "is being loaded in packets of 40K records (400 packets approx).
Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
Processing end : Errors occurred
Error when generating the update program
Diagnosis
An error occurred during program generation for InfoSource 0HR_PT_1 and
InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
We reactivated and verfieid update rules. But no use.
Appreciate any kind of help.
thanks in advance.
J.Oscar,
Thanks for the help.
We tried the following one by one.
1. Delete and recreate update rules. To be frank....there is no CODING or complication in there...
It did not work.
2. Tried loading only to PSA. It loaded 15mill records perfectly. But when we tried updating target cube,
same story with many more errors.....earlier we had 10 packages failed out of 387.......
this time almost every alternate package is marked red and same error....update generating update
program.....
Hope somebody will come up with a solution. -
Position Activity Sequence Resulting in data extracting error
hi gurus
can any body tell me what is this position activity sequence error resulting in data extracting error, plz help. this is very high priority for me.
regards
devI rebuild the report using a tabular form and populated the primary key with a PL/SQL expression and now it appears to be working. P1_ISSUE_NO is the primary key on the issue table and I could not figure how to get it in the issue_no field of the tabular report when a new line was entered I ended up putting the following code in for the default for
issue_no on the report:
Begin
return :P1_ISSUE_NO;
end
It works great.
Maybe you are looking for
-
Itunes will not launch after fresh install and repeated re-installs
I've been browsing around the forums here and the support system hoping for an answer to this question. On Monday my hard drive died and I had to buy a new one. I reinstalled windows and itunes among other things. I have a brand new Video Ipod as wel
-
Error In Tomcat But Not In WebLogic
I have a .war file that runs perfectly in WebLogic 7.0. Today I tried to run that same .war in Tomcat 4.0.6. Unfortunately, it did not run. I get the following error: java.lang.IllegalStateException: Cannot for
-
Upgradation from ECC 5.0 to ECC 6.0
Hi Friends, As an SD Consultant what would be the roles and responsibilities in the upgradation projects(from 4.6C/4.7E/ECC 5.0 to ECC 6.0) with regards
-
Problem with Simple MailSend Program
Pls, help, I am new to the JavaMailApi. My program is trying :) to connect to MailServer via SMTP and SSL protocol. It does not work. I turned on Session debbuging. I got "DEBUG SMTP: trying to connect to host "smtp.googlemail.com", port 465, isSSL f
-
I have a 1st gen 32 GB iPod touch running iPhone os 3.1.3. and I am having a very strange problem where I cannot hear any vocal track on movies or music. I can hear any sound effects or music just fine, but talking or singing cannot be heard. On some