Error in executing transaction

Hi all,
I created a transaction. While I am trying to executing the transaction, I got the error message as " org.apache.xerces.dom.TextImpl " - Action failed. ( I got this error in normalization action).
What has to be done to rectify this error?
Thanks & Regards,
P.S.Kishore kumar

Hi Kishore,
In normalize action block, your input is a XML variable with multiple rowsets having a common column name. And it should also contain the same number of rows in each rowset.
I hope this will help to solve your problem.
Thanks,
Rajesh

Similar Messages

Error while executing transaction in logic editor

Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!

U better try to clear the cache enteries and try this.it may help

Runtime error while executing transaction BDLS

Hello,
While executing BDLS transaction for converting logical system names I am getting following error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
Short text
 Unable to interpret "7,160 " as a number.
How to resolve the above problem?

Hi Rachel,
BDLS creates an ABAP program SBDLS* which includes all the tables possibly including logical system names as of the domain behind the table fields. This program firstly
lives in runtime only and is checked by syntax checker.
Now, sometimes tables have inconsistencies associated with them and you
will get this dump when a syntax check is performed on them.
So please check this and regenerate the culprit tables.
So please redo the steps for BDLS and check. There are
probably some tables which could be determined by you (syntax
check - in case program has already been saved only)
An easy way to check this is to run RBDLS2LS program (old BDLS) and
afterwards performing a syntax check on generated RBDLS*** (RBDLS<(>
<<)>(>
<<(><<)>)>ClientName>) program.
Known tables which caused such dumps in the past are:
DFKKCOLFILE_P_W
DFKKKO
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Simply reactivate the tables you find out in SE11.
Another thing which has lead to this dump in the past is
in your R/3-System the value ' x ' is
additionally added to the value of your current release in the basis
release table SVERS.
The table RSBASIDOC takes the release value from the table SVERS.
If you change value 'x' to your release in both tables (SVERS and
RSBASIDOC) and
and activate again your source system connection. This could solve the
dump too.
I hope, this helps-if not, pls open a message with SAP.(component: BC-MID-ALE)
b.rgds, Bernhard

Error While Executing Transaction Through SSO

Hi Guys,
I am trying SSO between Portal 6.0 and BW 3.5
I have added my BW system into Portal, RFC as well as JCo is working fine.
While executing any transaction its giving me following error.
http://<host_name>:<Port>/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
The termination occurred in system <SID> with error code 403 and for the reason Forbidden.*
The selected virtual host was 0 .*
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:<host_name>_<SID>_<nr>-v:0-s:403-r:Forbidden
Appretiate your response
Regards,
Sachin

Sachin,
Please refer to these links, you can have a look at the check list to figure out if you might have forgotten or missed a step while configuring the SSO.
Single Sign On between EP6.0 and BW 3.5
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/sso%2bchecklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6535e690-0201-0010-6989-9e27386e1f24
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/portal+implementation&
http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
Reward points if handy!
Cheers,
Sandeep

Runtime error when executing transaction 'PPOME'

Hi all,
 
 
 I 'm new to SAP and would like to beg a helping hand.
 I had tired the 'free search' function in PPOME.
 and I m not sure what mistake I make. When I execute t-code PPOME again, it is getting the runtime error.
 
 the following are the descritpion of exception by T-code ST22.
 the error is related to u201CSAP_IN_ITAB_ILLEGAL_OPTIONu201D and I read the its SAP NOTE(1256059).
 However, I don't how to do so that fix this problem.
 May anyone help me~
 
 ----
 Short text
 Invalid value in OPTION field of value table for IN itab operator.
 
 What happened?
 Error in the ABAP Application Program
 
 The current ABAP program "%_T0DQG0" had to be terminated because it has
 come across a statement that unfortunately cannot be executed.
 
 Error analysis
 The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
 statement in which the WHERE condition contains an IN itab operator.
 
 The IN itab operator is used with internal tables which
 have the following structure:
 
 SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
 
 The OPTION column should contain only one of the following values:
 
 "EQ LE GE CP BT NE LT GT NP NB"
 
 The value " " is not allowed here.
 
 How to correct the error
 Use only one of the permitted values in the OPTION column.
 
 If the error occures in a non-modified SAP program, you may be able to
 find an interim solution in an SAP Note.
 If you have access to SAP Notes, carry out a search with the following
 keywords:
 
 "SAPSQL_IN_ITAB_ILLEGAL_OPTION" " "
 "%_T0DQG0" or "%_T0DQG0"
 "GET_OBJECTS"
 
 If you cannot solve the problem yourself and want to send an error
 notification to SAP, include the following information:
 
 1. The description of the current problem (short dump)
 
 To save the description, choose "System->List->Save->Local File
 (Unconverted)".
 
 2. Corresponding system log
 
 Display the system log by calling transaction SM21.
 Restrict the time interval to 10 minutes before and five minutes
 after the short dump. Then choose "System->List->Save->Local File
 (Unconverted)".
 
 3. If the problem occurs in a problem of your own or a modified SAP
 program: The source code of the program
 In the editor, choose "Utilities->More
 Utilities->Upload/Download->Download".
 
 4. Details about the conditions under which the error occurred or which
 actions and input led to the error.
 
 User and Transaction
 
 Client.............. 300
 User................ "xxxxxxxx"
 Language key........ "E"
 Transaction......... "PPOME "
 Transactions ID..... "26F031E14FDBF1E0BB3500155D7F2106"
 
 Program............. "%_T0DQG0"
 Screen.............. "SAPMSSY0 1000"
 Screen line......... 6
 
 
 Information on where terminated
 The termination occurred in the temporary subroutine pool "%_T0DQG0" in
 "GET_OBJECTS".
 The main program was "OM_START_NF ".
 
 The point of termination in the source code is in line 69 of
 the temporary subroutine pool "%_T0DQG0".
 
 Edited by: jack22000011 on Dec 29, 2011 9:05 AM
Edited by: jack22000011 on Dec 29, 2011 9:11 AM

Hi all,
I am getting the exact same dump.
And in my case, I am not providing any input.
I have made a non-obligatory selection screen parameter, and then appended that to a table type of the local structure of select options that i made.
Then i am passing this to a fm as an importing parameter.
And it is giving dump on the first query in the fm.
If I don't use the fm, then in that case, it is working fine, and if the field is blank it fetches all records,
but why it is not working now..., any ideas???

Error while executing Transaction S_ALR_87012043

Hi All,
I am getting the following error while running the Transaction S_ALR_87012043 - G/L Account Balances.
*Error Message: 'Variant SAP&001 of program RFSSLD00 is not the current version'
the long text says*
Variant SAP&001 of program RFSSLD00 is not the current version
Message no. DB634
Diagnosis
You attempted to start report RFSSLD00 using variant SAP&001. Since this variant was generated, the report SELECT-OPTIONS or PARAMETERs have changed considerably, i.e. the type or length no longer match and PARAMETERs have become SELECT-OPTIONS or vice versa. Many of these changes are so serious that even attempting to import the variant results in runtime errors.
Procedure
Adjust or delete the variant.
Is there any OSS notes available for this error??
Regards
Andrew

Thank You Ravi.
I got the OSS Notes specifically for that Error.
Note:1066048 - RFSSLD00: Variants obsolete.
Once again Thanks for your immediate reply.
Problem Solved.
Cheers
Andrew

Runtime Errors: CONVT_OVERFLOW while executing transaction sm66

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error while executing the CKMLCP (Actual Costing) Transaction

Hi Expert,
I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
See the below error for referance:-
Internal error in program SAPLCKML_RUN_COCKPIT_ACT
Message no. CKMLRUN004
Diagnosis
An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
System Response
Processing had to be terminated.
Procedure
Inform your system administrator
Thanks
Dinesh

Hi Shyam,
Thanks Shyam,
I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
but support Package in my system SAP_APPL 603 SAPKH60303,
Is there any other note or solution for 603 SP
Thanks
Dinesh

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Error executing transaction: org/apache/xpath/XPathAPI

I have imported one transaction from 12.0.5 MII verstion to 12.1 version and got the following error while running. I think this error is related to some java class. Could you please tell me where to pu the jar for solving this error.
In case this error comes due to some other problem please let me know
Transaction Complete.
Error executing transaction: org/apache/xpath/XPathAPI

Hi,
 Now I understood the problem and it is related to the dependency jar files. For running my custom actions I have the
dependency of 2 jar files . One is sqljdbc.jar and second is xalan.jar. sqljdbc.jar I have added in the following way. Can anyone tell me how can I add the xalan.jar in catalog.xml file
<?xml version="1.0" encoding="UTF-8"?>
<ComponentCatalog >
 <Category Name="My Functions" Description="My Custom Objects">
 <Component Type="Action" Name="XAController12" Description="" Label="XA Controller" ClassName="com.my.xacute.actions.XAController12" AssemblyName="my.jar" Dependencies="sqljdbc.jar"/>
 </Category>
</ComponentCatalog>
Thanks
Shaji

Error SG 105 when executing transaction KKAK

Hi,
When executing transaction KKAK (Results Analysis) for month end processing we get the following error for a especific sales order:
"E SG105 Enter rate CAD/USD rate type P for 01/01/2010 in the system settings"
My question will be: why is the system asking to enter that rate which we never use. We use rate M but not P. Is that really necessary?
We are using release 470, level 003, Support Package SAPKH47031.
Thanks for your help.

HI,
in the year-depending parameters of the controlling area version definition, the ex.rate type (P) and the valid-from-date is defined, thats why P is used.
Best regards, Christian

Runtime error in KEFC Transaction while uploading CSV format file

Hi Experts,
This is regarding Runtime Error while executing the KEFC transaction in R3D.
It is working successfully while uploading the file in Text format. But there is run time error while uploading in CSV format.
It showing "The transfer was terminated.However,content errors occured" .
Please provide the solution.
Thanks in advance.
Regards,
Priya.

Hi,
To upload a CSV file it is used FM:
CALL FUNCTION 'TEXT_CONVERT_CSV_TO_SAP'
EXPORTING
i_field_seperator = ';'
I_LINE_HEADER =
i_tab_raw_data = lt_file
i_filename = p_filename
TABLES
i_tab_converted_data = p_table
EXCEPTIONS
conversion_failed = 1
OTHERS = 2
Please check what separetor this fm and your file are using. It should be the same.
Regards,
Fernando

Error while executing the function module BAPI_RE_CN_CREATE

Dear All
I was using the the function module BAPI_RE_CN_CREATE. When I am trying to execute the function module I am getting the error message u201CBusiness transaction RECN doest existu201D. While inputting the parameters for the function module I have given RECN In the input field TRANS. Requesting you to please kindly suggest.
Regards.
Varaprasad

Hi Varaprasad,
please try the following.
1. Create a contract manually in the system
2. Use BAPI_RE_CN_GET_DETAIL to show how the fields and structures are filled.
3. Check and change the parameters for BAPI_RE_CN_CREATE accordingly.
Hope that helps.
Regards, Franz

Error while executing the application

Hi Friends,
I am getting error while executing the application.The error is
"javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
Can anybody help me..
Thanks in advance.

You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
m

Error in executing transaction

Similar Messages

Maybe you are looking for