Error in Instantiate Phase (adcrdb.sh) during adcfgclone.pl dbconfig

Hello,
I am finishing an environmental clone from PRD->TST and am running the adcfgclone.pl dbconfig (because controlfiles will not be created) portion to configure the target database. It progresses to the point of DB Application and then errors out with the below message. I have verified that the file itself exists on the target DBTier, and that the permissions are correct on the file. Has anyone seen this before, or could they recommend anything? Thanks in advance.
+[AutoConfig Error Report]+
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
+<filename> <phase> <return code where appropriate>+
+[INSTANTIATE PHASE]+
AutoConfig could not successfully instantiate the following files:
Directory: /u01/oracle/xxxTST/db/tech_st/11.1.0/appsutil/install/xxxTST_xxxtstxx
adcrdb.sh INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDatabase

Correct. After searching the log file, it explains to me that adcrdb.sh is missing from the <$ORACLE_HOME>/appsutil/template directory. So, I copy the file from the Source<$ORACLE_HOME>/appsutil/template to the Target <$ORACLE_HOME>/appsutil/template directory. Immediately upon kicking off the adcfgclone.pl dbconfig again it is deleted. This is very strange. Am I missing something?
-rwxr----- 1 oracle dba 4015 Dec 19 16:18 adcrdb.sh
[oracle@x07tst00 template]$ ls -lrt adcrdb.sh
-rwxr----- 1 oracle dba 4015 Dec 19 16:18 adcrdb.sh
[oracle@x07tst00 template]$ ls -lrt adcrdb.sh
-rwxr----- 1 oracle dba 4015 Dec 19 16:18 adcrdb.sh
[oracle@x07tst00 template]$ ls -lrt adcrdb.sh
-rwxr----- 1 oracle dba 4015 Dec 19 16:18 adcrdb.sh
[oracle@x07tst00 template]$ ls -lrt adcrdb.sh
ls: adcrdb.sh: No such file or directory
[oracle@x07tst00 template]$ ls -lrt adcrdb.sh
ls: adcrdb.sh: No such file or directory
[oracle@x07tst00 template]$ ls -lrt adcrdb.sh
ls: adcrdb.sh: No such file or directory

Similar Messages

Error running adcfgclone.pl dbconfig post-clone

Attempting a clone/refresh of our TEST EBSR12 environment. Followed steps in the documentation. First, I ran adrpeclone.pl dbTier. Next I ran adpreclone.pl appsTier. Subsequently, I copied the source $APPL_TOP, $COMN_TOP, and TechStack from source system to target system. Next step was to shutdown DB and run adcfgclone.pl dbTechStack. Then, target DB control files were created and RMAN restore commenced. Once this was finished, the DB was started in open mode, @adupdlib.sql script was run, and target DB was configured using perl adcfgclone.pl dbconfig (and reading in the XML context file) Result was a failure:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/ebstst/db/tech_st/11.1.0/appsutil/install/ebstst_p10tst01
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/ebstst/db/tech_st/11.1.0/appsutil/install/ebstst_p10tst01
adcrobj.sh INSTE8_APPLY 1
Any pointers? All I see in the logfile is "ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor" This is impossible because all the info in the TNSNames file is set correctly.

Please post the details of the application release, database version and OS.
Attempting a clone/refresh of our TEST EBSR12 environment. Followed steps in the documentation. First, I ran adrpeclone.pl dbTier. Next I ran adpreclone.pl appsTier. Subsequently, I copied the source $APPL_TOP, $COMN_TOP, and TechStack from source system to target system. Next step was to shutdown DB and run adcfgclone.pl dbTechStack. Then, target DB control files were created and RMAN restore commenced. Once this was finished, the DB was started in open mode, @adupdlib.sql script was run, and target DB was configured using perl adcfgclone.pl dbconfig (and reading in the XML context file) Result was a failure:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/ebstst/db/tech_st/11.1.0/appsutil/install/ebstst_p10tst01
afdbprf.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/oracle/ebstst/db/tech_st/11.1.0/appsutil/install/ebstst_p10tst01
adcrobj.sh INSTE8_APPLY 1
Any pointers? All I see in the logfile is "ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor" This is impossible because all the info in the TNSNames file is set correctly.Please search the log file for afdbprf.sh and adcrobj.sh scripts and you should find more details about the error around the file names.
Was the database created successfully? Please make sure the database is up and it is open along with the database listener.
Please see if (Autoconfig Error On Dbtier After Upgrade - afdbprf.sh and adcrobj.sh fail with ORA-27101: shared memory realm does not exist [ID 422709.1]) is applicable.
Thanks,
Hussein

Error in preprocessing phase

Hi All ,
We are facing error in preprocessing phase of upgrade to EHP 7 ,Let me know if anyone can help us in this critical situation
System details:Oracle 11gr2,Linux x86-64 ,
Below is the error :
During the phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RFCDEST_CREATE_S2OX in
Pre-processing of the SUM we are facing below error.
1 ETQ233 Calling function module "FUNCTION_EXISTS" by RFC
2 ETQ373 parameter "FUNCNAME" = "RFC_DESTINATION_CREATE"
1 ETQ234 Call of function module "FUNCTION_EXISTS" by RFC succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ359 RFC Login to: System="XXX", AsHost="sapXXXpas" Nr="12",
GwHost="sapa10pas", GwService="sapgwZZ"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ233 Calling function module "RFC_DESTINATION_CREATE" by RFC
2 ETQ373 parameter "DESTINATION_NAME" = "SAP_UPGRADE_ORIG_SYSTEM"
2 ETQ373 parameter "USER" = "DDIC"
2 ETQ373 parameter "HOST" = "sapXXXpas"
2 ETQ373 parameter "SYSTEMNR" = "11"
2 ETQ373 parameter "CHECK" = "X"
1EETQ235 Call of function module "RFC_DESTINATION_CREATE" by RFC failed
(error-status "3")
2EETQ360 RFC of "RFC_DESTINATION_CREATE" failed:
2EETQ361 code/exception : 3
2EETQ362 key : CALL_FUNCTION_NO_DEST
2EETQ399 RFC destination SAP_UPGRADE_ORIG_SYSTEM does not exist.
Regards
Bharat
Mob No: 91 9008804153

Hi Reagan ,
The issue was taken to SAP development security team :::Below is the weird issue ::
Firstly ,for the authorizations to work correctly, all authorization tables must be in a consistent state as below :
ust04, ust10c, ust10s, ust12, usrbf2, usrbf3.
If we want to maintain authorizations, also usr04, usr10, usr12 are required.
But here , a mismatch of tables usrbf2 and usrbf3 in 2 instances are the reason for the stuck in the upgrade :::
SQL> select count(*) from sapsr3.USRBF2 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
2997
SQL> select count(*) from sapsr3.USRBF3 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
1
SQL>
SQL> select count(*) from sapsr3shd.USRBF2 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
673
SQL> select count(*) from sapsr3shd.USRBF3 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
1
This issue was resolved by SAP and then upgrade went fine ,This is not an issue with password of DDIC !!!!!
Regards
Ram

Error in ACTIVATE_CURRENT_USAGES phase of portal upgrade (NW04 to NW04s)

hello gurus,
i am upgrading Netweaver 04 to netweaver 04s (Enterprise Portal)
oracle upgrade from 9.2.0.7 to 10.2.0.1 successfully
but i am getting error in 78 phase out 100 in java upgrade program management
ACTIVATE_CURRENT_USAGES
i am unable to track the cause.......
log file is shown below
kindly help......
its urgent
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:\usr\sap\jupgrade\log\ACTIVATE_CURRENT_USAGES_ACU_07.LOG]/>
<!PATTERN[ACTIVATE_CURRENT_USAGES_ACU_07.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
#1.5#C000AC1908C2000000000029014A8CD1000432D6B5DD7008#1181797662421#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:713)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:713)#Java###Phase has been started.#1#UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES#
#1.5#C000AC1908C200000000002A014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:714)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:714)#Java###Phase type is .#1#com.sap.sdt.ucp.phases.PhaseTypeExecuteTask#
#1.5#C000AC1908C200000000002B014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#Java### Parameter =#2#inputFile#ExecuteTasks.xml#
#1.5#C000AC1908C200000000002C014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#Java### Parameter =#2#taskName#ACTIVATE_CURRENT_USAGES#
#1.5#C000AC1908C200000000002D014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.checkParameters(PhaseTypeExecuteTask.java:191)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.checkParameters(PhaseTypeExecuteTask.java:191)#Java###Phase parameters have been checked. All required phase parameters have been set.#1#2#
#1.5#C000AC1908C200000000002E014A8CD1000432D6B5F009C0#1181797663640#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#Java###Configuration has been built from input file .#1#D:/usr/sap/jupgrade/config/ExecuteTasks.xml#
#1.5#C000AC1908C200000000002F014A8CD1000432D6B5F13A70#1181797663718#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#Java###Configuration has been built from input file .#1#D:/usr/sap/jupgrade/config/ExecuteTasks_WIN.xml#
#1.5#C000AC1908C2000000000030014A8CD1000432D6B5F13A70#1181797663718#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.cfg.ConfigurationBuilder.buildGlobalConfiguration(ConfigurationBuilder.java:251)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.cfg.ConfigurationBuilder.buildGlobalConfiguration(ConfigurationBuilder.java:251)#Java###Global configuration has been built from input file .#1#D:/usr/sap/jupgrade/config/ExecuteTasks.xml#
#1.5#C000AC1908C2000000000031014A8CD1000432D6B5F13A70#1181797663718#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#2#com.sap.engine.offline.OfflineToolStart#
#1.5#C000AC1908C2000000000032014A8CD1000432D6B5F178F0#1181797663734#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #C:
j2sdk1.4.2_09
jre
bin
java.exe -cp d:/usr/sap/W60/SYS/global/sltools/sharedlib/launcher.jar;d:/usr/sap/W60/SYS/global/sltools/sharedlib; com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain d:/usr/sap/W60/SYS/global/sltools/sharedlib;D:/usr/sap/W60/SYS/global/security/lib/tools;D:/usr/sap/w60/jc00/exe/classes12.jar -activated -sid=W60 -dsn=jdbc/pool/W60 -ssprops=D:/usr/sap/W60/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/W60/SYS/global/security/data/SecStore.key -log=D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS.LOG -prod_name=NetWeaver -usage_name=AS -usage_vendor=sap.com -action=true#
#1.5#C000AC1908C2000000000033014A8CD1000432D6B5F178F0#1181797663734#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #D:
usr
sap
jupgrade
log
ACTIVATE_USAGE_AS_ACU_01.OUT#
#1.5#C000AC1908C2000000000034014A8CD1000432D6B5F178F0#1181797663734#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:120)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:120)#Java###Process ID has been started.#1#2#
#1.5#C000AC1908C2000000000035014A8CD1000432D6B5F1B770#1181797663750#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:176)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:176)#Java###Waiting for process ID , name to finish.#2#2#java.exe#
#1.5#C000AC1908C2000000000036014A8CD1000432D6B6B9BE78#1181797676859#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:209)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:209)#Java###Process ID , name has been finished, exit code .#3#2#java.exe#64#
#1.5#C000AC1908C2000000000037014A8CD1000432D6B6B9BE78#1181797676859#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:735)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:735)#Java###Exception has occurred during the execution of the phase.##
#1.5#C000AC1908C2000000000038014A8CD1000432D6B6B9FCF8#1181797676875#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.execute.AbstractExtProcessOperation.generateResultProcessingException(AbstractExtProcessOperation.java:579)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.execute.AbstractExtProcessOperation.generateResultProcessingException(AbstractExtProcessOperation.java:579)#Java###Could not activate usage AS. Could not execute 'C:
j2sdk1.4.2_09
jre
bin
java.exe -cp d:/usr/sap/W60/SYS/global/sltools/sharedlib/launcher.jar;d:/usr/sap/W60/SYS/global/sltools/sharedlib; com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain d:/usr/sap/W60/SYS/global/sltools/sharedlib;D:/usr/sap/W60/SYS/global/security/lib/tools;D:/usr/sap/w60/jc00/exe/classes12.jar -activated -sid=W60 -dsn=jdbc/pool/W60 -ssprops=D:/usr/sap/W60/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/W60/SYS/global/security/data/SecStore.key -log=D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS.LOG -prod_name=NetWeaver -usage_name=AS -usage_vendor=sap.com -action=true', return code '64'. You can check the file(s) 'D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS_ACU.OUT', 'D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS_ACU.ERR' to which the output of the process has been redirected.##
#1.5#C000AC1908C2000000000039014A8CD1000432D6B6B9FCF8#1181797676875#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.execute.AbstractExtProcessOperation.execute(AbstractExtProcessOperation.java:176)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.execute.AbstractExtProcessOperation.execute(AbstractExtProcessOperation.java:176)#Java###Error while processing the result.##
#1.5#C000AC1908C200000000003A014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.execute(PhaseTypeExecuteTask.java:173)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.execute(PhaseTypeExecuteTask.java:173)#Java###Error while executing PhaseTypeExecuteTask with input file ExecuteTasks.xml and task ACTIVATE_CURRENT_USAGES.##
#1.5#C000AC1908C200000000003B014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#Java###Phase has been completed.#1#UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES#
#1.5#C000AC1908C200000000003C014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#Java###Start time: .#1#2007/06/14 10:37:42#
#1.5#C000AC1908C200000000003D014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#Java###End time: .#1#2007/06/14 10:37:56#
#1.5#C000AC1908C200000000003E014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#Java###Duration: .#1#0:00:14.453#
#1.5#C000AC1908C200000000003F014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#Java###Phase status is .#1#error#
waiting for solution
thankx in advance....
shoeb

Could you please share us the solution?

Error in DEPLOY_ONLINE_DEPL phase EHPI 7.01 SPS05 DualStack ABAP+JAVA

Hello experts,
I'm getting an error in DEPLOY_ONLINE_DEPL phase (Downtime Roadmap) under J2EE tab in enhancement package installation in our BW System (Netweaver 7.0 SP 17 to NW 7.01 SPS 05 DualStack ABAP+JAVA)
The system is running on High Availability server.
Restarting Q2B 00 instance failed.
Cannot find instance with instance number 0 on host mcho35au in the cluster.
I'm not sure, but maybe anything is wrong with my profiles...? I don't know....
All J2EE deployments has been successfully finished (JSPM).
I have restarted all instances DVEBMGS00 & SCS01 and Shadow Instance DVEBMGS02. SCS01 Instance is up and running as well.
Then I have stop EHPI Upgrade and start it again.
DEPLOY_ONLINE_DEPL_DDB_18.LOG:
==========================================
RequestController.java:178)[Thread[main,5,main]]: Deployment of queue sapjup-queue completedwith error Cannot check the state(running/stoped) of the CI.
Restarting Q2B 00 Instance failed
Connot find instance with instance number 0 on host mcho35au in the cluster
==========================================
An error has occurred during the execution of the DEPLOY_ONLINE_DEPL phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action. Could not execute deployment of stack file /usr/sap/trans/EPS/in/SMSDXML_CROSSSYS_20091109075202.238.xml. The deployment of the queue failed. Deployment of queue sapjup-queue completed with error Cannot check the state(running/stoped) of the CI. Restarting Q2B 00 instance failed. Cannot find instance with instance number 0 on host mcho35au in the cluster. JSPM version is 7.01.5.0.20. Current JSPM log directory is /usr/sap/Q2B/DVEBMGS00/j2ee/JSPM/log/log_2009_11_14_18_20_03.
You can find more information in the log file /usr/sap/swdc/EHPI/java/log/DEPLOY_ONLINE_DEPL_DDB_19.LOG.
==========================================
Any ideas ?
Please help me in this case.
I'm wating for any feedbacks.
Thanks a lot in advance !
Gerd
Edited by: Gerd Schuster on Nov 14, 2009 6:23 PM

Problem:
The DEPLOY_ONLINE_DEPL phase (Downtime Roadmap) under J2EE tab in enhancement package installation in BW System (Netweaver 7.0 SP 17 to NW 7.01 SPS 05 DualStack ABAP+JAVA, system is running on High Availability server) stopped with error:
RequestController.java:178)[Threadmain,5,main]: Deployment of queue sapjup-queue
completedwith error Cannot check the state(running/stoped) of the CI.
Restarting Q2B 00 Instance failed
Connot find instance with instance number 0 on host mcho35au in the cluster
An error has occurred during the execution of the DEPLOY_ONLINE_DEPL phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for
the specified action. Could not execute deployment of stack
file /usr/sap/trans/EPS/in/SMSDXML_CROSSSYS_20091109075202.238.xml. The deployment
of the queue failed. Deployment of queue sapjup-queue completed with error Cannot check the
state(running/stoped) of the CI. Restarting Q2B 00 instance failed. Cannot find instance with instance
number 0 on host mcho35au in the cluster. JSPM version is 7.01.5.0.20. Current JSPM log directory
is /usr/sap/Q2B/DVEBMGS00/j2ee/JSPM/log/log_2009_11_14_18_20_03.
You can find more information in the log file /usr/sap/swdc/EHPI/java/log/DEPLOY_ONLINE_DEPL_DDB_19.LOG.
Solution:
stop all instances (shadow instance, SCSxx)
In a High Availability server you have to modify few parameters in DEFAULT profile temporarily (replace alias-servername with real hostname):
DEFAULT.PFL: SAPLOCALHOST = mcho35au
DEFAULT.PFL: SAPDBHOST = mcho35au
DEFAULT.PFL: rdisp/mshost = mcho35au
# DEFAULT.PFL: rdisp/vbname = mcho35au_Q2B_00 (<- maby it'snot relevant)
# DEFAULT.PFL: rdisp/enqname = mcho35au_Q2B_00 (<- maby it'snot relevant)
# DEFAULT.PFL: rdisp/btcname = mcho35au_Q2B_00 (<- maby it'snot relevant)
DEFAULT.PFL: rdisp/sna_gateway = mcho35au
in instance DVEBMGS00 switch profile icman = 0 to 1 (otherwise J2EE instance will not started)
startsap DVEBMGS00
Restart EHPI Upgrade (EHPI keep the old DEFAULT.PFL settings in shared memory!)
./EHPI/STARTUP jce_policy_zip=90000125.zip
Repeat phase DEPLOY_ONLINE_DEPL
Gerd
Edited by: Gerd Schuster on Nov 16, 2009 2:59 PM

Error in XPRA_EXECUTION phase in instalation BI_CONT 3.53

Hello,
After installing SAP Netweaver 04 as ABAP i am Installing Add-on
BI_CONT Rel.353 : Import of the queue -
via SAINT Tcode.
Now it is in error in XPRA_EXECUTION Phase of pkg
SAPKIBIFQ4 BI_CONT 353: patch 0014.
Error is in Method Execution step:
InfoObject 0GRC_CSEOWR, version D being deleted, (basic char. not
found)
Start of the after-import method for object type R3TR DTMP ( )
Errors occurred during post-handling RS_AFTER_IMPORT_D for DUPD L
RS_AFTER_IMPORT_D belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT_D completed for DUPD L, date and
time: 20080103122305
Pls help me ASAP to resolve this error.
Regards,
Ankita

Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi

Support Pack upgrade error in Import Phase

Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File:                /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request   : SAPKB70013
System              : xxxx
tp path             : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_OBJECT_COLLECTION==========CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDR_APPLICATION_WINDOW=====CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDY_MD_EVENT_SOURCE========CI
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_END
tabname:    WDY_APP_PROPERTY
len (char): 64
key:        DEMO_UIEL_DROPDOWN_BY_IDX     DEMO_VIEW
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDY_MD_OUTGOING_EVENT======CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
     |   ######################################
Thanks and Regards,
Sankar
SAP BASIS Consultant

Hi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          10.09.2010 09:41:37
Short text
     Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
     The function module "POSS_UIREQ_OPT_SUBMIT" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
      not caught in
     procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program "SAPLSTXC" contains the CALL FUNCTION statement.
     The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
     No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
     All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
    upper/lower case and underscores ("_").
    or
b) Transport error
c) In the case of an enqueue/dequeue module,
    the lock object may not have been activated
    (ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant

Error no. 4 in SAPGUI during graphic call or file transfer.

Hi,
In the landscape there are still 46b sap version, i have some functional queries that when i executes go to the sap graphic screen and it throws with no output. I understand that that it works in ECC version but not for 46b.
This issue is related to SAPGUI, as i have the latest sapgui installed 710 that works well for ECC.
But if i input the parameter in sap 46b system , and execute to get the graphic chart i get this:
The Generation of Graphs for Stock Movements in the MC49 Transaction.
When you call a hierarchy graphic, the following error messages are displayed
1. 'Too much data in a table or too many tables defined
2. E4: error writing to XC pipe: child #1 ( id: STAT ); reclen12
3. Error no. 4 in SAPGUI during graphic call or file transfer.
I have also look in to note 316232, 361222, 96885. for this but this says to upgrade the sapgui,which is already in.
What is the solution for this.
Regards,
Chetan.

Take a look at this thread. This may provide you some guidance as it appears that Error has been encountered before.
[Link Here|Error no. 4 in SAPGUI with Graphics call or file transfer;
Regards,
Zecher

PI 7.1 upgrade error in GETSYNC_PROFILES_CHANGED phase

Hello
Currently I am upgrading an XI 7.0 system to PI 7.1. The downtime phases have just started and I've hit an error in the phase 'GETSYNC_PROFILES_CHANGED'; the error is 'Not enough space for string replacement'. Based on the phase name, and the previous phases, it looks as if the error is something to do with the profiles. The relevant upgrade logs have no useful info in them except for the string space message.
I have done the usual SDN, SAP Marketplace and Google searches but could not find an answer to my problem. I have also opened a high priority call with SAP but they have not come up with an answer yet. Does anybody have any useful advice?
The system being upgraded is running on Windows 2003 Server R2 64bit, has an Oracle 10.2.0.4 DB, and the source system was XI/PI 7.0 SP15.
Thanks.

Hello Rohit
Freespace is more than sufficient:
C:\ = 5.2GB (O/S)
D:\ = 18.9GB (Oracle & SAP)
E:\ = 8.53GB (Oracle)
Andrew
Edited by: Andrew Turvey on May 28, 2009 3:48 PM

Error in ABAP_Import Phase

Dear Guru's,
We are facing some issue on ABAP Import phase, out of 29 Import Monior jobs 2 jobs gets failed.
Error in Import_ABAP Phase, 2 jobs failed
Loading of 'DD03L' import package: ERROR
Loading of 'SACONT01' import package: ERROR
could anyone suggest me, what could be done to resolve this issue.
regards,
Guna

Hi,
Thanks for your information.
We tried with retry option, still in same position.
We're doing solution manager 7.0 installation on AIX 5.
(DB) INFO: SACONT01 deleted/truncated #20100429153529
(DB6) Using LOAD API for table SACONT01
(RFF) ERROR: invalid checksum in data file "/hm/cdmedia/solman7.0/51033518_Expor
t2/EXP3/DATA/SACONT01.001"
current table was "SACONT01"
(DB) INFO: disconnected from DB
/usr/sap/SM1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SM1/SYS/exe/run/R3load: END OF LOG: 20100429153530
Suggestions appreciated.
regards,
Guna

A fatal error occured in the PD Layer during create Supplier RFx response

Dear SRM 7 Experts,
I am implementing SRM 7. I can successfully create a Supplier RFx Response on behalf of a supplier using the Surrogate Bid functionality. However, if I log on as a supplier contact person and try to create a Supplier RFx Response, I get error u201D A fatal error occured in the PD Layer. The transaction needs to be terminatedu201D.
Number ranges for Supplier RFx response (BUS2202) are maintained and assigned to the transaction type correctly.
What could be the problem?
Kind regards
Pedzi

Hi
Here is the thread which solved the same problem:
Re: A fatal error occured in the PD Layer during RFx response
with regards
Manjunath

Error: Action "Install_WatsonX86_Cpu32_Action" threw an exception during execution

During install of SqlServer Express 2008 (also I tried Developer Edition 2008 R2 with same error) I have error:
2014-05-01 17:13:52 Slp: Running Action: Install_WatsonX86_Cpu32_Action
2014-05-01 17:13:52 Slp: Error: Action "Install_WatsonX86_Cpu32_Action" threw an exception during execution.
2014-05-01 17:13:52 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: C:\WINDOWS\Installer\7affd.msi ---> System.IO.FileNotFoundException: C:\WINDOWS\Installer\7affd.msi
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp:    --- Конец трассировки внутреннего стека исключений ---
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()Error: Action "MsiTimingAction" threw an exception during execution.
2014-05-01 17:13:52 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: C:\WINDOWS\Installer\7affd.msi ---> System.IO.FileNotFoundException: C:\WINDOWS\Installer\7affd.msi
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet propertyId)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp:    --- Конец трассировки внутреннего стека исключений ---
2014-05-01 17:13:52 Slp:    в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:52 Slp: Received request to add the following file to Watson reporting: C:\Documents and Settings\me\Local Settings\Temp\tmp1C4.tmp
2014-05-01 17:13:52 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2014-05-01 17:13:52 Slp: Inner exceptions are being indented
2014-05-01 17:13:52 Slp:
2014-05-01 17:13:52 Slp: Exception type: System.IO.FileNotFoundException
2014-05-01 17:13:52 Slp:     Message:
2014-05-01 17:13:52 Slp:         C:\WINDOWS\Installer\7affd.msi
2014-05-01 17:13:52 Slp:     Stack:
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet
propertyId)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet
propertyId)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia,
InstallAction pkgAction)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2014-05-01 17:13:52 Slp:         в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2014-05-01 17:13:56 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-05-01 17:13:56 Slp: Sco: Unable to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_, Win32 error
2
2014-05-01 17:13:56 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-05-01 17:13:56 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-05-01 17:13:56 Slp: Sco: Unable to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_171325\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_, Win32 error 2
I checked C:\WINDOWS\Installer\ for "7affd.msi" - there is no such file. Also I checked same folder on Win7-64 machine and Notebook WinXP-Pro - there is no such file. I was able to install Express on both Win7-64 and Notebook, but not on this machine.
I've tried searching for "7affd.msi" on internet without luck. Also I removed all Visual Studio Express 2010 and used any "Fix-It" utilities to check files and registry. And still have same error.
How to fix it?

Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -819060177
Exit facility code:            1838
Exit error code:               8751
Exit message:                  C:\WINDOWS\Installer\7affd.msi
Start time:                    2014-05-01 21:16:41
End time:                      2014-05-01 21:17:00
Requested action:              ComponentUpdate
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_211629\Detail_ComponentUpdate.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xCF2E222F
Machine Properties:
Machine name:                  3R-XP
Machine processor count:       4
OS version:                    Windows XP
OS service pack:               Service Pack 3
OS region:                     Россия
OS language:                   русский (Россия)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         j:\85c0db9df26d4ae0b40b522d393a\x86\setup\
Installation edition:          EXPRESS
User Input Settings:
ACTION:                        ComponentUpdate
CONFIGURATIONFILE:
HELP:                          False
INDICATEPROGRESS:              False
MEDIASOURCE:                   j:\85c0db9df26d4ae0b40b522d393a\
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_211629\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_211629\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.IO.FileNotFoundException
    Message:
        C:\WINDOWS\Installer\7affd.msi
    Data:
      DisableWatson = true
    Stack:
        в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetSummaryInformationStringProperty(ServiceContainer context, String pathToMsi, SummaryInformationStreamPropertySet propertyId)
        в Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetInstalledSummaryInformationStringProperty(ServiceContainer context, String productCode, SummaryInformationStreamPropertySet propertyId)
        в Microsoft.SqlServer.Configuration.SetupExtension.MsiInstallEngineActionBehavior.ModifyAction(String installedProductCode, String installedProductVersion, String pathOfPackageOnMedia, InstallAction pkgAction)
        в Microsoft.SqlServer.Configuration.SetupExtension.MSIInstallerEngine.InstallPackage(PackageId pkg, InstallAction pkgAction)
        в Microsoft.SqlServer.Configuration.MsiExtension.PackageInstallAction.Execute(String actionId, TextWriter errorStream)
        в Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
        в Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

Error in OLTP 2.0 extractor during init. selection

During 0FIAR_O03 Init package load on PRD system I got thousands of errors with the same message:
*Error in OLTP 2.0 extractor during init. selection
What's wrong with these selections?
My data load is 3.x type
I'm loading into BI for SAP Netweaver 2004s

I get error while trying INIT LOAD by RSA3:
"Could not determine BW release of logical system ''
I get no errors if i'm trying FULL LOAD

There is error 'No such file or directory' during loading custom authentica

Hi,
I am working on OBIEE authentication using Hyperion shared services. I did the necessary changes in config file, like modifying config.xml to enable HSSauthenticator and enabling external authentication to instanceconfig.xml. However BI Server is unable to load the driver file for the Hyperion custom authenticator. Here is the error message.
There is error 'No such file or directory' during loading custom authentication module '/opt/local/usr/home/Oracle/OracleBI/web/bin64/libsawobisauthenticatorproxy643r.so'.
2011-06-26 21:04:05
[nQSError: 13011] Query for Initialization Block 'Hyperion EPM' has failed.
I have set the env variable LD_LIBRARY_PATH to this path but still I am getting the same error msg. I also have full previleges on this file. Would be really great if anyone can tell me why I am unable to load this driver file on to server. Thanks in advance

I think I figured out. Instead of giving path thru bin64 , I gave it thru bin folder, which is a 32bit file. I think they installled a 32bit OBIEE.

Curve 9300 error message: there was a problem during installation. Please try again when using app world

hi
I have a curve 9300 using os 6 and the latest app world 2.1.1.. something
when i try to download apps it initiates the download then after a couple of seconds after starting it shows the error message "there was a problem during installation. Please try again"
i have tried ALL the suppourt forums (KB26671 and KB30074) and suggestions/threads and called my network but none have worked.
these were reinstallign app world, making a new blackberry id as the other email address was associated with an old blackberry, security wiping the phone then restoring it and entering the new bb id, changing the date to 2014 and then hard wiping the phone and restoring it
i have twitter, facebook and bbm ect apps but these are RIM made i think and already preinstalled. everything else on the phone works fine
i have tried both wifi and network internet and battery pull
i really dont know what else to try or who else to contact to fix it. very annoying paying for a service you cant even use!
any help or more ideas would be great!
thanks

Hello carckberrypie,
In this case i would recommend wiping the BlackBerry smartphone. To do this we would need to back up the BlackBerry smartphone http://bit.ly/aSediX
Once backed up please follow the link below to perform a security wipe of your BlackBerry smartphone.
Link: http://www.blackberry.com/btsc/KB14058
Test the BlackBerry smartphone and proceed with a selective restore as outlined below.
Link: http://www.blackberry.com/btsc/KB10339
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Error in Instantiate Phase (adcrdb.sh) during adcfgclone.pl dbconfig

Similar Messages

Maybe you are looking for