Error in LSMW in step7---specify file
dear all
when i am specifying a file it is not allowing me to save & throwing the error----
"No Logical Path Specified".i have taken a local file as text file with a tabular format....
thanx
Hi,
Please go through this link. You can achieve ur requirement with this information
Re: 2nd and 4th saturday off problem
Re: How to make every second saturday of month "OFF" for all the employees..
Workschedules generation with first saturday working rest Off
Re: Time Mgt
MVR
Similar Messages
-
LSMW : Unable to Specify Files . Logical path incorrect ?
Hi Guys,
I am trying to upload Goods movement Using the Standard LSMW 0110 program RM07MMBL.
When I try to execute the step Specify Files ,system displays an error message "No Logical Path specified."
The Source File is in my Local PC .
When I click the Converted Data File in the Specify files list
I get a popup which asks me for a Logical path and a Logical File and both these parameters a mandatory.
I tried to maintain the parameters and entries in transaction FILE also.
But it says 'logical path not assigned to the physical directory.'
What is the correct method for this.
What steps should I follow ..
Pls advice
Message was edited by: hao fuHi,
Refer the oss note 753511 released for this kind of error you face in LSMW, I am pasting the content of the note below,
******************Note Content,
Symptom
The system issues an error message for the logical path or file when you perform the "Specify files" step in the Legacy System Migration Workbench (transaction LSMW) although you have made the correct assignment in transaction FILE.
The error messages are as follows:
The logical path <PATH> does not point to the physical directory.
The logical file <FILE> is not assigned to the physical file.
or
A logical path was not specified.
Other terms
Logical path, logical file, transaction FILE, LSM Workbench
Reason and Prerequisites
Some import interfaces that you can also use with transaction LSMW work with logical path and file names.
Transaction LSMW itself, however, works with physical file names. To be able to transfer the LSMW file with the converted data to the import program, you must specify a logical file name for the file with the converted data in addition to the physical file name. In this case, the system displays additional fields in the 'Specify files' step in which you must enter the logical path and file name.
Solution
The error messages may be due to several causes. Check the following:
Have you maintained the logical path and logical file name and have you assigned them to the physical file specified in the "File" input field of transaction LSMW?
These settings are maintained in transaction FILE.
When you use logical file and path names, you must specify the name of the physical file with its path. If you have not specified any directory, you cannot assign any directory to the logical path in transaction FILE. In this case, the system uses the SAP Home directory on the application server by default. Bear in mind that the file name must not exceed the maximum length of 45 characters, including the path.
Up to LSMW version 1.7.2 (*):
If the logical file name specified does not point to the physical file (although it should do), the system adjusts the logical file name, that is, the information in transaction FILE is changed to the entries made in transaction LSMW. This may lead to unwanted side effects if the logical file is also used somewhere else. Therefore, SAP recommend that you always use separate logical paths and file names for transaction LSMW (the problem is corrected as of LSMW version 1.8.0, see below). If the logical file does not exist yet, it will be created upon request.
As of LSMW version 1.8.0 (*):
The settings of the logical file are checked but no longer adjusted automatically as in version 1.7.2 (see above). If there are inconsistencies, the system issues an error message. If the user is authorized to maintain logical paths and file names (as for transaction FILE: "Maintenance authorization for cross-client tables"), transaction LSMW can create the logical path, the file name and the file. Due to this automatic generation, the user no longer needs to make adjustments in transaction FILE. Therefore, we especially recommend this procedure.
To display the version of transaction LSMW, select "Extras" --> "Display LSMW version" in the main menu of the initial screen.
You should also bear in mind that as of Basis Release 6.20, that is, as of LSMW version 4.0, transaction LSMW is no longer an add-on but is delivered with the standard system.
Hope this helps,
Rgds, -
Dear consultant
This given below error come in 7th stap(Specify files) in LSMW, please guide me how to do it
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Diagnosis
Some import interfaces only accept file names (including path) that have a maximum of 45 characters.
System Response
All data except the file name of the converted data is saved.
Procedure
Adjust the file name for the converted data.
Regards
MaheshIn specify file - > converted data the file name is formed using the PROJECT , SUBPROJECT NAME AND OBJECT NAME so the after concatenating it is going more than 45 char . so in specifyfile->converted data , reduce the file name ( by remove the some initial charaters ) to name less the 45 characters. this will slove u r issue.
-
Lsmw error 'Specify Files first' while executing option 'Read Data'.
Hi All,
while trying to create mass users through LSMW, i am gettign the error 'Specify Files first' while executing option 'Read Data'.
I have specified file (.txt), manually created (with'1 tab space' between each term). i have used option 'On the PC(Frontend)'. No error while saving.
Next- i have executed 'Assign Files', where the file appeared automatically.
Next- Here, when i try to execute 'Read Data', i get the error 'Specify Files first'.
Can anyone help in resolving this error.Hello Plaban,
What is your purpose? Are you tring to upload the data with more file variant?
There are two possibilities to make file names more variable:
1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).
2.You can use wildcards in the file names where you can assign several values.
I hope this helps you.
Regards,
Blanca -
Error in LSMW Specify Files option
Hi Gurus,
I am getting error while doing Specify Files option while using below mentioned object:
Object 0210 Storage bin (WM)
Method 0000
Program name RLPLAT00
Program type B Batch input
Error :
In Convert data option i am entering below details:
Logical Path /TMP
Logical File MM_WM_BIN_TAKEOVER
I am getting error :
Logical file 'MM_WM_BIN_TAKEOVER' is not assigned to physical file 'UPGRD_MTD_WM_TEST.lsmw.conv'
Cany anyone suggest what should i do to execute this?
Regards,
ArpitHi Guys,
I have solved my problem. Please refer below note for solution of this problem:
Note 753511 - Logical and physical path and file name in transaction LSMW
Our LSMW version was upgraded to 4.0 hence i was getting this error. I have provided Logical file name and Path accordingly to solve my problem
Arpit -
Lsmw Error during the specify files
While doing Material master upload thru lsmw...using Batch input method
During the specify files step i am getting this error
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Pls Guide me.......Hi,
How you save your source file? Need to be saved in as TAB delimited file
OK. Check link:
http://www.sap123.com/a/98/#loading-material-masters-with-lsmw-direct-input-method
http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench
Regards,
Biju K -
Error-lsmw -in the step specify file
HI ALL,
Iam struck up in lsmw . I doing for the transaction "mb11" , opening inventory balance .
when i do the step " SPECIFY FILE " , iam getting error like "specify a logical path " . I have choosed a file on the local pc .
what would be the problem .
Plz help me in this.
thanks,
regards,
rajkasi.Just choose one of the logical files from the dropdown. This is not where you specify the file from PC. Hopefully there is one called "TEST". This is what I use for all of my LSMWs. It's just asking for a place to put the data that is read and converted.
Regards,
Rich Heilman -
Error in LSMW while specifying file for Material Cassification and Info Rec
Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
AmitHi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn -
While specifying file in LSMW it is giving an error while saving 'No logica
while specifying file in LSMW it is giving an error while saving 'No logical path has been specified'.why it is coming like that?
Hi Shree,
This error looks like that you have attached the activity to the work center and there is no rate has been maintained in KP26. Please maintain the activity ...for1000/300008/LABORP
for the period and try to repeat the costing run.
I hope this clarifies...
Regards
Rajesh A -
LSMW: Error concerning the logical path in Specify Files step
Hi,
I am trying on an ECC 6.0 EHP6 system to upload (open) POs from an existing SAP ERP system. Since I faced some complications in batch input recording method, I decided to go with the standard batch/direct input method.
I selected object 0085 (Purchase Order) and method 0001 (Purchase Order). The program that is used is RM06EEI0. I followed all the usual steps, but in the "Specify Files" step I get the message:
'****.lsmw.conv' does not exist; edit the logical path using transaction FILE
Being aware of both the FILE and SF01 transactions, I created the logical path and file (through the FILE transaction). However, after the modification, I get the message:
Logical file '****' is not assigned to physical file '****.lsmw.conv'
There is also the related SAP Note 753511 (Logical and physical path and file name in transaction LSMW) that refers to this case.Hi,
Click on specify file radio button>Legacy data-on the PC Front end
where input file location like C:\mydocument\desktop\test.txt
and give input in Name field: mydocument
in delimiter section > select Tabular
File structure section> tick on Field order matches source structure definition
File type: Record end marker(Text file)
then press enter key and other steps as same.
Second thing you said that you have used Batch input recording
after creation and recording finish , scroll the page below on recording and put a cursor unwanted field and remove unwanted input field.
I hope your problem will resolve. you can find the steps pdf on Google search try now.
Thanks
Sanjeet Kumar -
LSMW by BI : Unable to specify file in step 7; logical Path not assigned
Hi,
I'm trying to uplaod HR DATA using object 0555 and method 0000 for Program RPDUSTD00 using LSMW Batch Input Method.
In step 7 when i specify file which tab delimited text file at front end pc(at my pc) let say c:\test.txt and save I got error message 'Logical path not assigned'.
Please suggest what I'm missing and what i need to do to get it correct.
Thanks,
Anshuman.Hi,
There are other files specified in the screen for imported and converted data. These files must be accessible on SAP application server. If the logical file names are not created use physical ones lik /tmp/blabla.lsmw.read etc.
Make sure you use different files for different objects.
Kind regards
Michael -
In lsmw im not able to get any our put in the step read data it is showing me error not able to read file.
i check with the files in apllication server as well as the path i specified in lsmw .they both are same with out any case sensitive.
step specify files:
so now import data
and convert data are there in the same step.
now when i specify the import data ,it is throwing me an information message this file has already been assign to another object.
it is showing the same for convert data as well
so now my question is due to this i may not be able to read the data or what ?
thanks in advance
Aru
reward points given .Hi this can happen because of 2 reasons
1) If you are using 2 structures ( Header and Item ) then their are some fields which should be in both structures . And those field should have same value
You can check this in step ( Generate read programme ) . At this step there is statement like
loop at HEADER_ITEM_DATA
where OLD_SERVTICKET_NUM =
HEADER_DATA-OLD_SERVTICKET_NUM
in the above example OLD_SERVTICKET_NUM is a field which both structures should have same value
2) Second reason can be that number of fields in your flat file might not be same in your structures fields which you have defined in 3rd step
Plz check
Reward points
Thanks -
LSMW problem (Specify files)
Hi Friends
I try to specify file in LSMW (from local PC).
<b>Legacy Data On the PC (Frontend)</b>
When I save this step I get error like "No Logical Path Specified".
What should I do to correct this problem. Please help me.
Thanks in advance.
HariSrikanth thanks.
When I check logical path & file for converted data, those fields are mandatory fields. There is now value assigned, so I get this error. Now I assign logical path & file which already defined in system.
For the lofical path, when I check in FILE transaction it has physical path as /usr/sap/DEV/SYS/global/<FILENAME>.
But when I assign this logical path in LSMW (converted data)..I get error message like "Logical path does not point to physical directory"
What should I do in this case.
Please explain me.
Thanks
Bala -
LSMW Specify files - file on Application server
Hi friends,
I have a silly doubt, how can i speify the file for LSMW on Application Srever, i mean i want the example, i tried giving logical path and file name, but it gives error saying file can't read.
Thanks a lot.In the Specify file step double click on the following option
Legacy Data On the R/3 server (application server)
Enter the application server file name with full path and description.
Like /tmp/test.txt -
Error in LSMW(File Name 'Converted Data': Max. 45 Characters. Remaining dat
hai friends
I am new of the lsmw, i am doing the recording method in lsmw,
i got a one error in specify files step, the error is 'Converted Data' Max.45 Characters. Remaining data' what i do next
thanks®ards
chinnuHi Kumar,
This error occurs because LSMW restrict the converted data file (path and filename)
to max of 45 characters.
The naming of this converted file is auto-assigned by LSMW at the first creation.
but you can modify the name and shorten it manually by going to step
Specify Files
-> double click the converted data and shorten the filename until the length
of filepath and name is less than 45.
Have a nice try and good luck
Maybe you are looking for
-
Filter table not screening all the name of customers
Hello, Filter tabel not screening all the name of the customers.During filter of the Open Sales Order report. Please reply me ASAP Thanks & Regard's Amit Tyagi
-
Migrating 8.1.7.4 to 10.2: about apps
Hi plp, I'm migrating my db 8i to 10g, and I have a lot of applications (I've done them with Oracle Forms 6i/10g) that work with the db. My question is... what kind of changes I must do in my apps for them to be perfectly compatible with the new 10.2
-
How to install Broad Casting in BI 7.0
Hi Guys, Please let me know how can i install broad casting in BI 7.0. Please give the urls for the documents. Thanks Prasanna
-
I tap Safari and the application opens but it does not load a page. You can not select a bookmark or type in an web address or refresh. If have restored the phone hoping that would fix it. It did not. All other application appear to work correctly ex
-
I have a new mac mini with OS X, Version 10.4.5 and I am trying to load ITC Kabel font with font book and can't. My friend has a G5 with OS X, Version 10.4.6 (with Classic also loaded) and she can load the same font in her OS X font book. When I open