Error in Process Order Creation

Hi Experts,
I am facing a problem while creating a process Order in COR1
I have got an error reading Master Data which is
No task list for select.ID 04 for auto. task list selection found
Please Help me out.
Thanking You In advance.

Dear Ashish,
1.Check if a master recipe exists for the material in C203 and if exists means check the usage and status of the master recipe.
that is value for status as 4 - Released General and usage - 1 - production .
2.If no master recipe exists means then create one using T.Code C201.
3.Then check the impact in COR1.
Regards
Mangalraj.S

Similar Messages

Error during process order creation

while i create a process order following error is coming "recipe is empty"
please tell me where exactly i'm going wrong.

Dear Dhaval,
Welcome Back
Long time heard from you and nice to see your reply from long time
Good Luck !!!
Regards
Madhu

Error in : Purchase order Creation using BAPI_PO_CREATE1

Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
        i_create_order,
        i_cycle     TYPE cycle,
        i_qty_acpt TYPE dzmeng,
        i_dly_date TYPE vbak-vdatu,
        i_item      TYPE roijnomiio .
DATA: i_order TYPE symsgv,
        i_return TYPE swd_return .
DATA: i_vbak      TYPE vbak,
        i_vbap      TYPE vbap,
        i_ekko      TYPE ekko,
        i_ekpo      TYPE ekpo,
        i_bsoh      TYPE bapisdhd1,
        i_bsohx     TYPE bapisdhd1x,
        i_bpoh      TYPE bapimepoheader,
        i_bpohx     TYPE bapimepoheaderx,
        i_vbeln     TYPE vbeln_va,
        i_posnr     TYPE posnr_va,
        i_contr     TYPE vbeln_va,
        i_conit     TYPE posnr_va,
        i_ebeln     TYPE ebeln,
        i_ebelp     TYPE ebelp,
        i_pargr     TYPE pargr,
        i_thead     TYPE thead,
        i_line      TYPE tline,
        i_note      TYPE txw_note,
        i_new_vbeln TYPE vbeln_va,
        i_new_ebeln TYPE ebeln,
        i_wa_bsoi   TYPE bapisditm,
        i_wa_bsoix TYPE bapisditmx,
        i_wa_bsop   TYPE bapiparnr,
        i_wa_bsos   TYPE bapischdl,
        i_wa_bsosx TYPE bapischdlx,
        i_wa_vbpa   TYPE vbpa,
        i_wa_vbkd   TYPE vbkd,
        i_wa_bpoi   TYPE bapimepoitem,
        i_wa_bpoix TYPE bapimepoitemx,
        i_wa_bpos   TYPE bapimeposchedule,
        i_wa_bposx TYPE bapimeposchedulx,
        i_wa_bpop   TYPE bapiekkop,
        i_wa_ekpa   TYPE ekpa,
        i_message   TYPE char72,
        i_bapiretn TYPE bapiret2,
        i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
        i_vbpa      TYPE TABLE OF vbpa INITIAL SIZE 1,
        i_vbkd      TYPE TABLE OF vbkd INITIAL SIZE 1,
        i_ekpa      TYPE TABLE OF ekpa INITIAL SIZE 1,
        i_bsoi      TYPE TABLE OF bapisditm INITIAL SIZE 1,
        i_bsoix     TYPE TABLE OF bapisditmx INITIAL SIZE 1,
        i_bsos      TYPE TABLE OF bapischdl INITIAL SIZE 1,
        i_bsosx     TYPE TABLE OF bapischdlx INITIAL SIZE 1,
        i_bsop      TYPE TABLE OF bapiparnr INITIAL SIZE 1,
        i_bpoi      TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
        i_bpoix     TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
        i_bpos      TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
        i_bposx     TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
        i_bpop      TYPE TABLE OF bapiekkop INITIAL SIZE 1,
        i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
        i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
        i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
        i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
             c_char_e VALUE 'E',
             c_char_p VALUE 'P',
             c_char_g VALUE 'G',
             c_char_i VALUE 'I',
             c_char_s VALUE 'S',
             c_char_x VALUE 'X',
             c_zsw(3) VALUE 'ZSW',
             c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split        TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
    IF NOT i_create_order IS INITIAL .
      CLEAR: i_create_order .
          MOVE: wa_order_split_create-docnr TO i_ebeln,
                wa_order_split_create-docitm TO i_ebelp .
          CALL FUNCTION 'ME_EKKO_SINGLE_READ'
               EXPORTING
                    pi_ebeln         = i_ebeln
               IMPORTING
                    po_ekko          = i_ekko
               EXCEPTIONS
                    no_records_found = 1
                    OTHERS           = 2.
          IF sy-subrc <> 0 .
          ENDIF .
* Fill PO Header
          i_bpoh-comp_code   = i_ekko-bukrs .
          i_bpoh-doc_type    = i_ekko-bsart .
          i_bpoh-vendor      = i_ekko-lifnr .
          i_bpoh-langu       = i_ekko-spras .
          i_bpoh-pmnttrms    = i_ekko-zterm .
          i_bpoh-purch_org   = i_ekko-ekorg .
          i_bpoh-pur_group   = i_ekko-ekgrp .
          i_bpoh-currency    = i_ekko-waers .
          i_bpoh-agreement   = i_ekko-konnr .
          i_bpoh-incoterms1 = i_ekko-inco1 .
          i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
          i_bpohx-comp_code = c_char_x .
          i_bpohx-doc_type   = c_char_x .
          i_bpohx-vendor     = c_char_x .
          i_bpohx-langu      = c_char_x .
          i_bpohx-pmnttrms   = c_char_x .
          i_bpohx-purch_org = c_char_x .
          i_bpohx-pur_group = c_char_x .
          i_bpohx-currency   = c_char_x .
          i_bpohx-agreement = c_char_x .
          i_bpohx-incoterms1 = c_char_x .
          i_bpohx-incoterms2 = c_char_x .
          CALL FUNCTION 'ME_EKPO_SINGLE_READ'
               EXPORTING
                    pi_ebeln         = i_ebeln
                    pi_ebelp         = i_ebelp
               IMPORTING
                    po_ekpo          = i_ekpo
               EXCEPTIONS
                    no_records_found = 1
                    OTHERS           = 2.
          IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF .
* Fill PO Item
          i_wa_bpoi-po_item    = i_ekpo-ebelp .
          i_wa_bpoi-material   = i_ekpo-matnr .
          i_wa_bpoi-plant      = i_ekpo-werks .
          i_wa_bpoi-stge_loc   = i_ekpo-lgort .
          i_wa_bpoi-quantity   = wa_order_split_create-qty_acptd .
          i_wa_bpoi-po_unit    = i_ekpo-meins .
          i_wa_bpoi-tax_code   = i_ekpo-mwskz .
          i_wa_bpoi-val_type   = i_ekpo-bwtar .
          i_wa_bpoi-item_cat   = i_ekpo-pstyp .
          i_wa_bpoi-acctasscat = i_ekpo-knttp .
          i_wa_bpoi-agreement = i_ekpo-konnr .
          i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
          APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
          i_wa_bpoix-po_item    = i_ekpo-ebelp .
          i_wa_bpoix-po_itemx   = c_char_x .
          i_wa_bpoix-material   = c_char_x .
          i_wa_bpoix-plant      = c_char_x .
          i_wa_bpoix-stge_loc   = c_char_x .
          i_wa_bpoix-quantity   = c_char_x .
          i_wa_bpoix-po_unit    = c_char_x .
          i_wa_bpoix-tax_code   = c_char_x .
          i_wa_bpoix-val_type   = c_char_x .
          i_wa_bpoix-item_cat   = c_char_x .
          i_wa_bpoix-acctasscat = c_char_x .
          i_wa_bpoix-agreement = c_char_x .
          i_wa_bpoix-agmt_item = c_char_x .
          APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
          i_wa_bpos-po_item       = i_ekpo-ebelp .
          i_wa_bpos-sched_line    = '0001' .
          i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
          i_wa_bpos-quantity      = wa_order_split_create-qty_acptd .
          APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
          i_wa_bposx-po_item       = i_ekpo-ebelp .
          i_wa_bposx-sched_line    = '0001' .
          i_wa_bposx-delivery_date = c_char_x .
          i_wa_bposx-quantity      = c_char_x .
          APPEND i_wa_bposx TO i_bposx .
          CLEAR: i_pargr .
          SELECT SINGLE pargr
            INTO i_pargr
            FROM t161
           WHERE bstyp = i_ekko-bstyp
             AND bsart = i_ekko-bsart .
          CLEAR i_ekpa[].
          CALL FUNCTION 'MM_READ_PARTNERS'
               EXPORTING
                    application = c_char_p
                    ebeln       = i_ebeln
                    bstyp       = i_ekko-bstyp
                    pargr       = i_pargr
               TABLES
                    x_ekpa      = i_ekpa[].
          LOOP AT i_ekpa INTO i_wa_ekpa .
            i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
            i_wa_bpop-langu = sy-langu .
            IF NOT i_wa_ekpa-lifn2 IS INITIAL .
              i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
            ELSE .
              i_wa_bpop-buspartno = i_wa_ekpa-parnr .
            ENDIF .
            APPEND i_wa_bpop TO i_bpop .
            CLEAR: i_wa_ekpa, i_wa_bpop .
          ENDLOOP .
          CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
          CALL FUNCTION 'BAPI_PO_CREATE1'
               EXPORTING
                    poheader         = i_bpoh
                    poheaderx        = i_bpohx
               IMPORTING
                    exppurchaseorder = i_new_ebeln
               TABLES
                    return           = i_bapiret2
                    poitem           = i_bpoi[]
                    poitemx          = i_bpoix[]
                    poschedule       = i_bpos[]
                    poschedulex      = i_bposx[].
          i_order = i_new_ebeln .
          SHIFT i_order LEFT DELETING LEADING '0' .
          i_return-errortype = c_char_i .
          i_return-workarea = c_zsw .
          i_return-message   = '064' .
          i_return-variable1 = i_order .
        loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
        append i_bapiretn to t_bapi_return .
      endloop .
      if t_bapi_return[] is initial .
         i_create_order = c_char_x .
           CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
               EXPORTING
                    act_return = i_return. "Popup with new PO no.
      ENDCASE .                                     " Docind
    ENDIF .
ENDLOOP.

Hi Shareen,
I think in the following parts of the code,
          CALL FUNCTION 'MM_READ_PARTNERS'
               EXPORTING
                    application = c_char_p
                    ebeln       = i_ebeln
                    bstyp       = i_ekko-bstyp
                    pargr       = i_pargr
               TABLES
                    x_ekpa      = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM      Reply      E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
        i_create_order,
        i_cycle     TYPE cycle,
        i_qty_acpt TYPE dzmeng,
        i_dly_date TYPE vbak-vdatu,
        i_item      TYPE roijnomiio .
DATA: i_order TYPE symsgv,
        i_return TYPE swd_return .
DATA: i_vbak      TYPE vbak,
        i_vbap      TYPE vbap,
        i_ekko      TYPE ekko,
        i_ekpo      TYPE ekpo,
        i_bsoh      TYPE bapisdhd1,
        i_bsohx     TYPE bapisdhd1x,
        i_bpoh      TYPE bapimepoheader,
        i_bpohx     TYPE bapimepoheaderx,
        i_vbeln     TYPE vbeln_va,
        i_posnr     TYPE posnr_va,
        i_contr     TYPE vbeln_va,
        i_conit     TYPE posnr_va,
        i_ebeln     TYPE ebeln,
        i_ebelp     TYPE ebelp,
        i_pargr     TYPE pargr,
        i_thead     TYPE thead,
        i_line      TYPE tline,
        i_note      TYPE txw_note,
        i_new_vbeln TYPE vbeln_va,
        i_new_ebeln TYPE ebeln,
        i_wa_bsoi   TYPE bapisditm,
        i_wa_bsoix TYPE bapisditmx,
        i_wa_bsop   TYPE bapiparnr,
        i_wa_bsos   TYPE bapischdl,
        i_wa_bsosx TYPE bapischdlx,
        i_wa_vbpa   TYPE vbpa,
        i_wa_vbkd   TYPE vbkd,
        i_wa_bpoi   TYPE bapimepoitem,
        i_wa_bpoix TYPE bapimepoitemx,
        i_wa_bpos   TYPE bapimeposchedule,
        i_wa_bposx TYPE bapimeposchedulx,
        i_wa_bpop   TYPE bapiekkop,
        i_wa_ekpa   TYPE ekpa,
        i_message   TYPE char72,
        i_bapiretn TYPE bapiret2,
        i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
        i_vbpa      TYPE TABLE OF vbpa INITIAL SIZE 1,
        i_vbkd      TYPE TABLE OF vbkd INITIAL SIZE 1,
        i_ekpa      TYPE TABLE OF ekpa INITIAL SIZE 1,
        i_bsoi      TYPE TABLE OF bapisditm INITIAL SIZE 1,
        i_bsoix     TYPE TABLE OF bapisditmx INITIAL SIZE 1,
        i_bsos      TYPE TABLE OF bapischdl INITIAL SIZE 1,
        i_bsosx     TYPE TABLE OF bapischdlx INITIAL SIZE 1,
        i_bsop      TYPE TABLE OF bapiparnr INITIAL SIZE 1,
        i_bpoi      TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
        i_bpoix     TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
        i_bpos      TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
        i_bposx     TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
        i_bpop      TYPE TABLE OF bapiekkop INITIAL SIZE 1,
        i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
        i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
        i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
        i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
             c_char_e VALUE 'E',
             c_char_p VALUE 'P',
             c_char_g VALUE 'G',
             c_char_i VALUE 'I',
             c_char_s VALUE 'S',
             c_char_x VALUE 'X',
             c_zsw(3) VALUE 'ZSW',
             c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split        TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
    IF NOT i_create_order IS INITIAL .
      CLEAR: i_create_order .
          MOVE: wa_order_split_create-docnr TO i_ebeln,
                wa_order_split_create-docitm TO i_ebelp .
          CALL FUNCTION 'ME_EKKO_SINGLE_READ'
               EXPORTING
                    pi_ebeln         = i_ebeln
               IMPORTING
                    po_ekko          = i_ekko
               EXCEPTIONS
                    no_records_found = 1
                    OTHERS           = 2.
          IF sy-subrc <> 0 .
          ENDIF .
Fill PO Header
          i_bpoh-comp_code   = i_ekko-bukrs .
          i_bpoh-doc_type    = i_ekko-bsart .
          i_bpoh-vendor      = i_ekko-lifnr .
          i_bpoh-langu       = i_ekko-spras .
          i_bpoh-pmnttrms    = i_ekko-zterm .
          i_bpoh-purch_org   = i_ekko-ekorg .
          i_bpoh-pur_group   = i_ekko-ekgrp .
          i_bpoh-currency    = i_ekko-waers .
          i_bpoh-agreement   = i_ekko-konnr .
          i_bpoh-incoterms1 = i_ekko-inco1 .
          i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
          i_bpohx-comp_code = c_char_x .
          i_bpohx-doc_type   = c_char_x .
          i_bpohx-vendor     = c_char_x .
          i_bpohx-langu      = c_char_x .
          i_bpohx-pmnttrms   = c_char_x .
          i_bpohx-purch_org = c_char_x .
          i_bpohx-pur_group = c_char_x .
          i_bpohx-currency   = c_char_x .
          i_bpohx-agreement = c_char_x .
          i_bpohx-incoterms1 = c_char_x .
          i_bpohx-incoterms2 = c_char_x .
          CALL FUNCTION 'ME_EKPO_SINGLE_READ'
               EXPORTING
                    pi_ebeln         = i_ebeln
                    pi_ebelp         = i_ebelp
               IMPORTING
                    po_ekpo          = i_ekpo
               EXCEPTIONS
                    no_records_found = 1
                    OTHERS           = 2.
          IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF .
Fill PO Item
          i_wa_bpoi-po_item    = i_ekpo-ebelp .
          i_wa_bpoi-material   = i_ekpo-matnr .
          i_wa_bpoi-plant      = i_ekpo-werks .
          i_wa_bpoi-stge_loc   = i_ekpo-lgort .
          i_wa_bpoi-quantity   = wa_order_split_create-qty_acptd .
          i_wa_bpoi-po_unit    = i_ekpo-meins .
          i_wa_bpoi-tax_code   = i_ekpo-mwskz .
          i_wa_bpoi-val_type   = i_ekpo-bwtar .
          i_wa_bpoi-item_cat   = i_ekpo-pstyp .
          i_wa_bpoi-acctasscat = i_ekpo-knttp .
          i_wa_bpoi-agreement = i_ekpo-konnr .
          i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
          APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
          i_wa_bpoix-po_item    = i_ekpo-ebelp .
          i_wa_bpoix-po_itemx   = c_char_x .
          i_wa_bpoix-material   = c_char_x .
          i_wa_bpoix-plant      = c_char_x .
          i_wa_bpoix-stge_loc   = c_char_x .
          i_wa_bpoix-quantity   = c_char_x .
          i_wa_bpoix-po_unit    = c_char_x .
          i_wa_bpoix-tax_code   = c_char_x .
          i_wa_bpoix-val_type   = c_char_x .
          i_wa_bpoix-item_cat   = c_char_x .
          i_wa_bpoix-acctasscat = c_char_x .
          i_wa_bpoix-agreement = c_char_x .
          i_wa_bpoix-agmt_item = c_char_x .
          APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
          i_wa_bpos-po_item       = i_ekpo-ebelp .
          i_wa_bpos-sched_line    = '0001' .
          i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
          i_wa_bpos-quantity      = wa_order_split_create-qty_acptd .
          APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
          i_wa_bposx-po_item       = i_ekpo-ebelp .
          i_wa_bposx-sched_line    = '0001' .
          i_wa_bposx-delivery_date = c_char_x .
          i_wa_bposx-quantity      = c_char_x .
          APPEND i_wa_bposx TO i_bposx .
          CLEAR: i_pargr .
          SELECT SINGLE pargr
            INTO i_pargr
            FROM t161
           WHERE bstyp = i_ekko-bstyp
             AND bsart = i_ekko-bsart .
          CLEAR i_ekpa[].
          CALL FUNCTION 'MM_READ_PARTNERS'
               EXPORTING
                    application = c_char_p
                    ebeln       = i_ebeln
                    bstyp       = i_ekko-bstyp
                    pargr       = i_pargr
               TABLES
                    x_ekpa      = <b>i_ekpa[].</b>
          LOOP AT i_ekpa INTO i_wa_ekpa .
            i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
            i_wa_bpop-langu = sy-langu .
            IF NOT i_wa_ekpa-lifn2 IS INITIAL .
              i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
            ELSE .
              i_wa_bpop-buspartno = i_wa_ekpa-parnr .
            ENDIF .
            APPEND i_wa_bpop TO i_bpop .
            CLEAR: i_wa_ekpa, i_wa_bpop .
          ENDLOOP .
          CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
          CALL FUNCTION 'BAPI_PO_CREATE1'
               EXPORTING
                    poheader         = i_bpoh
                    poheaderx        = i_bpohx
               IMPORTING
                    exppurchaseorder = i_new_ebeln
               TABLES
                    return           = i_bapiret2
                <b>    poitem           = i_bpoi[]
                    poitemx          = i_bpoix[]
                    poschedule       = i_bpos[]
                    poschedulex      = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
        i_create_order,
        i_cycle     TYPE cycle,
        i_qty_acpt TYPE dzmeng,
        i_dly_date TYPE vbak-vdatu,
        i_item      TYPE roijnomiio .
DATA: i_order TYPE symsgv,
        i_return TYPE swd_return .
DATA: i_vbak      TYPE vbak,
        i_vbap      TYPE vbap,
        i_ekko      TYPE ekko,
        i_ekpo      TYPE ekpo,
        i_bsoh      TYPE bapisdhd1,
        i_bsohx     TYPE bapisdhd1x,
        i_bpoh      TYPE bapimepoheader,
        i_bpohx     TYPE bapimepoheaderx,
        i_vbeln     TYPE vbeln_va,
        i_posnr     TYPE posnr_va,
        i_contr     TYPE vbeln_va,
        i_conit     TYPE posnr_va,
        i_ebeln     TYPE ebeln,
        i_ebelp     TYPE ebelp,
        i_pargr     TYPE pargr,
        i_thead     TYPE thead,
        i_line      TYPE tline,
        i_note      TYPE txw_note,
        i_new_vbeln TYPE vbeln_va,
        i_new_ebeln TYPE ebeln,
        i_wa_bsoi   TYPE bapisditm,
        i_wa_bsoix TYPE bapisditmx,
        i_wa_bsop   TYPE bapiparnr,
        i_wa_bsos   TYPE bapischdl,
        i_wa_bsosx TYPE bapischdlx,
        i_wa_vbpa   TYPE vbpa,
        i_wa_vbkd   TYPE vbkd,
        i_wa_bpoi   TYPE bapimepoitem,
        i_wa_bpoix TYPE bapimepoitemx,
        i_wa_bpos   TYPE bapimeposchedule,
        i_wa_bposx TYPE bapimeposchedulx,
        i_wa_bpop   TYPE bapiekkop,
        i_wa_ekpa   TYPE ekpa,
        i_message   TYPE char72,
        i_bapiretn TYPE bapiret2,
        i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
        i_vbpa      TYPE TABLE OF vbpa INITIAL SIZE 1,
        i_vbkd      TYPE TABLE OF vbkd INITIAL SIZE 1,
        i_ekpa      TYPE TABLE OF ekpa INITIAL SIZE 1,
        i_bsoi      TYPE TABLE OF bapisditm INITIAL SIZE 1,
        i_bsoix     TYPE TABLE OF bapisditmx INITIAL SIZE 1,
        i_bsos      TYPE TABLE OF bapischdl INITIAL SIZE 1,
        i_bsosx     TYPE TABLE OF bapischdlx INITIAL SIZE 1,
        i_bsop      TYPE TABLE OF bapiparnr INITIAL SIZE 1,
        i_bpoi      TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
        i_bpoix     TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
        i_bpos      TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
        i_bposx     TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
        i_bpop      TYPE TABLE OF bapiekkop INITIAL SIZE 1,
        i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
        i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
        i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
        i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
             c_char_e VALUE 'E',
             c_char_p VALUE 'P',
             c_char_g VALUE 'G',
             c_char_i VALUE 'I',
             c_char_s VALUE 'S',
             c_char_x VALUE 'X',
             c_zsw(3) VALUE 'ZSW',
             c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split        TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
    IF NOT i_create_order IS INITIAL .
      CLEAR: i_create_order .
          MOVE: wa_order_split_create-docnr TO i_ebeln,
                wa_order_split_create-docitm TO i_ebelp .
          CALL FUNCTION 'ME_EKKO_SINGLE_READ'
               EXPORTING
                    pi_ebeln         = i_ebeln
               IMPORTING
                    po_ekko          = i_ekko
               EXCEPTIONS
                    no_records_found = 1
                    OTHERS           = 2.
          IF sy-subrc <> 0 .
          ENDIF .
Fill PO Header
          i_bpoh-comp_code   = i_ekko-bukrs .
          i_bpoh-doc_type    = i_ekko-bsart .
          i_bpoh-vendor      = i_ekko-lifnr .
          i_bpoh-langu       = i_ekko-spras .
          i_bpoh-pmnttrms    = i_ekko-zterm .
          i_bpoh-purch_org   = i_ekko-ekorg .
          i_bpoh-pur_group   = i_ekko-ekgrp .
          i_bpoh-currency    = i_ekko-waers .
          i_bpoh-agreement   = i_ekko-konnr .
          i_bpoh-incoterms1 = i_ekko-inco1 .
          i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
          i_bpohx-comp_code = c_char_x .
          i_bpohx-doc_type   = c_char_x .
          i_bpohx-vendor     = c_char_x .
          i_bpohx-langu      = c_char_x .
          i_bpohx-pmnttrms   = c_char_x .
          i_bpohx-purch_org = c_char_x .
          i_bpohx-pur_group = c_char_x .
          i_bpohx-currency   = c_char_x .
          i_bpohx-agreement = c_char_x .
          i_bpohx-incoterms1 = c_char_x .
          i_bpohx-incoterms2 = c_char_x .
          CALL FUNCTION 'ME_EKPO_SINGLE_READ'
               EXPORTING
                    pi_ebeln         = i_ebeln
                    pi_ebelp         = i_ebelp
               IMPORTING
                    po_ekpo          = i_ekpo
               EXCEPTIONS
                    no_records_found = 1
                    OTHERS           = 2.
          IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF .
Fill PO Item
          i_wa_bpoi-po_item    = i_ekpo-ebelp .
          i_wa_bpoi-material   = i_ekpo-matnr .
          i_wa_bpoi-plant      = i_ekpo-werks .
          i_wa_bpoi-stge_loc   = i_ekpo-lgort .
          i_wa_bpoi-quantity   = wa_order_split_create-qty_acptd .
          i_wa_bpoi-po_unit    = i_ekpo-meins .
          i_wa_bpoi-tax_code   = i_ekpo-mwskz .
          i_wa_bpoi-val_type   = i_ekpo-bwtar .
          i_wa_bpoi-item_cat   = i_ekpo-pstyp .
          i_wa_bpoi-acctasscat = i_ekpo-knttp .
          i_wa_bpoi-agreement = i_ekpo-konnr .
          i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
          APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
          i_wa_bpoix-po_item    = i_ekpo-ebelp .
          i_wa_bpoix-po_itemx   = c_char_x .
          i_wa_bpoix-material   = c_char_x .
          i_wa_bpoix-plant      = c_char_x .
          i_wa_bpoix-stge_loc   = c_char_x .
          i_wa_bpoix-quantity   = c_char_x .
          i_wa_bpoix-po_unit    = c_char_x .
          i_wa_bpoix-tax_code   = c_char_x .
          i_wa_bpoix-val_type   = c_char_x .
          i_wa_bpoix-item_cat   = c_char_x .
          i_wa_bpoix-acctasscat = c_char_x .
          i_wa_bpoix-agreement = c_char_x .
          i_wa_bpoix-agmt_item = c_char_x .
          APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
          i_wa_bpos-po_item       = i_ekpo-ebelp .
          i_wa_bpos-sched_line    = '0001' .
          i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
          i_wa_bpos-quantity      = wa_order_split_create-qty_acptd .
          APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
          i_wa_bposx-po_item       = i_ekpo-ebelp .
          i_wa_bposx-sched_line    = '0001' .
          i_wa_bposx-delivery_date = c_char_x .
          i_wa_bposx-quantity      = c_char_x .
          APPEND i_wa_bposx TO i_bposx .
          CLEAR: i_pargr .
          SELECT SINGLE pargr
            INTO i_pargr
            FROM t161
           WHERE bstyp = i_ekko-bstyp
             AND bsart = i_ekko-bsart .
          CLEAR i_ekpa[].
          CALL FUNCTION 'MM_READ_PARTNERS'
               EXPORTING
                    application = c_char_p
                    ebeln       = i_ebeln
                    bstyp       = i_ekko-bstyp
                    pargr       = i_pargr
               TABLES
                    x_ekpa      = i_ekpa.
          LOOP AT i_ekpa INTO i_wa_ekpa .
            i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
            i_wa_bpop-langu = sy-langu .
            IF NOT i_wa_ekpa-lifn2 IS INITIAL .
              i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
            ELSE .
              i_wa_bpop-buspartno = i_wa_ekpa-parnr .
            ENDIF .
            APPEND i_wa_bpop TO i_bpop .
            CLEAR: i_wa_ekpa, i_wa_bpop .
          ENDLOOP .
          CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
          CALL FUNCTION 'BAPI_PO_CREATE1'
               EXPORTING
                    poheader         = i_bpoh
                    poheaderx        = i_bpohx
               IMPORTING
                    exppurchaseorder = i_new_ebeln
               TABLES
                    return           = i_bapiret2
                    poitem           = i_bpoi
                    poitemx          = i_bpoix
                    poschedule       = i_bpos
                    poschedulex      = i_bposx.
          i_order = i_new_ebeln .
          SHIFT i_order LEFT DELETING LEADING '0' .
          i_return-errortype = c_char_i .
          i_return-workarea = c_zsw .
          i_return-message   = '064' .
          i_return-variable1 = i_order .
        loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
        append i_bapiretn to t_bapi_return .
      endloop .
      if t_bapi_return[] is initial .
         i_create_order = c_char_x .
           CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
               EXPORTING
                    act_return = i_return. "Popup with new PO no.
      ENDCASE .                                     " Docind
    ENDIF .
ENDLOOP.

Problem in process order creation.

Dear Sir/ Madam
i am facing a problem while process order creation.
the problem is:
Error when calculating cost for order ATFEDEC11 "see log Log is deleted when saving
Do you still want to save?"

Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan

Error in process order- availability check

Hi All,
system is throwing error while checking availability in process order creation. it says availability check is not maintained in materials and child component. but it is maintained. apokz field value is 3 for all materials. and it is showing error for all the materials.
while debugging we found there is a field TM00000000010R whose status is inactive.
any clue guys??
thanks in advance!!

Dear Ashish,
1.Check if a master recipe exists for the material in C203 and if exists means check the usage and status of the master recipe.
that is value for status as 4 - Released General and usage - 1 - production .
2.If no master recipe exists means then create one using T.Code C201.
3.Then check the impact in COR1.
Regards
Mangalraj.S

REGARDING PROCESS ORDER CREATION

Hi All,
While creating the process order for material, system showing the message that "Manual process order cannot be created for this product". But if we try with another user id, i could able to create the order for the same material.
Plz suggest the solution to get rid of this error.
Thanks
Arvind S

Hi,
The message "Manual process order cannot be created for this product" clearly indicates that the user is not authorized for Manual process order creation by COR1 transaction for this material and may be this material is planned through MRP or SOP etc. and in critical or certain situations manual process order creation is allowed to another user/user id for the same material ( type of materials/material code).
Some time organizations put such restrictions through enhancements. You can search the exact reason or logic of restriction by the help of ABAP consultant.
Regads,
Narresh

External Number gneration for process order creation

Hi,
I need to generate external number range for process order creation and at the time of goods receipt.
How can I do this in the include ZXVBZU02.
Regards
SAi

You might want to try search first:
http://www.google.com/search?hl=en&source=hp&q=externalnumberrangeforprocessordersite%3Asap.com

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

TCODE for Process order creation against Sales order

Hi gurus,
Pls tell me what is the TCODE for Process order creation against Sales order
Eg. CO07 is for production order from sales orde

Typically, in MTO scenario after the sales order is created you run MRP which will create planned order and then you convert that into production order using MD04.
Or if you have SD settings correctly directly from the release of Sales Order it will create planned order or production order.
please check and revert back.

Process order creation problem

I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order.
How to resolve the issue.

Check in CORW and switch off batch creation to isolate the problem if needed. Also see whether you have any batch managed compoents for which you have set master data for automatic batch determination.
There is no setting for material types and plant for batch. May be the error message is not correct. What is the message number?

Process Order Creation without Standard Cost

Hello All,
I need a functionality.. If standard cost is not released for a period , system should not allow me to create a process order in the certain period.
Is any standard configurations allow me to achieve this????
Thanks & regards
Mahesh
Message was edited by:
Maheshbabu M G

Mahesh,
Standard SAP allows creation of order without Std cost estimate. Only in REM you could make it give error.
However I suggest you could implement the exit PPCO0006.
In this the function module EXIT_SAPLCOZF_003 contains the import parameter CAUFVD_IMP which has material number (MATNR) and plant (WERKS). Pass these to table MBEW and get the value of STPRS (std cost). If this value is 0 then give the error.
Hope this is useful....if so reward points and close this thread.
Regards
Ram

Missing stock during Process Order creation

Hello Masters.
I'm facing a new problem here in my client.
Thats the situation:
We are trying to generate a subcontracting process order to delivery a semi finished material to a supplier in order to be packed. We already have a contract with this ssupplier, its been saved as a supplier, we already did this operation with him more than once.
The question is that during the process to create the process order, system is giving us a message that there is no enough stock off semi finished material to be send to the supplier. (it comes a message that is missing a small quantity to fiill the right amout we want to send to the 3rd party - something around 1,5% of the total amount)
But if we go to MMBE we can see the same amount of stock we want to delivery to the supplier in free utilization.
Besides we are using here WM we didn't see any difference that could give us the error.
In QM inspection batch all the amount were released (321 movement) no sample quantity was taking/retained.
The most insteresting part is the we did the same operation for the next batch of the same semi-finished material. I mean for the batch produced yesterday (monday may 9th) we already sent to the 3rd party for packing but for the batch from last friday, we are facing the issue.
In this case we have the same kind of process order, same 3rd party, same materials, same process a so on.
Please could you give me an idea where should I look for a solution.
Thanks in advance.
Harlen

Hello Vivek thanks for your anwer.
However, Ive talked to a QM consultant and presented the issue for him. He told me to use a SAP program QEVAC20 ( notes 48815 and 717622 ) to check possible inconsistences between QM and IM stock.
So We will try to use this report to check if there is an issue. Have you used this program before? Do you think it should help us?
Due to the process to create the process order, there is no issue, no issue with batch number or inspection lot. The error message comes when we try to select the batch number of semi finished material in COR1 tcode.
The message complains theat is missing a small quantity of the batch.
Tks,
Harlen

Automatic Reservation at the time of process order creation

Hi Experts,
As you are aware, when we create a process order and save, system automatically generates the reservation and the reservation will be for movement type 261. My requirement is like this. When system creates reservation, system should consider for which order type the process order is created and create a reservation for other movement type also.
For eg. Iam having order type ZRRW. When system creates reservation at the time of order creation, system should check the order type and reservation should be created for a movement type Z11 instead of 261 in the normal case.
Is there any user exit for the same. Please let me know.
Else how can I post the goods issue with a movement type other than 261. MIGO is not accepting other movement types.
Anticipating your reply
Regards
Prathib

Hi Ayethebing,
Thanks for the reply. we created the new movement types inorder to use the SAP standard reports and get the different types of goods movements based on the different processes.
We can do the goods issue using the custom movement type through MB1A. But I was trying to use in MIGO and this is where system wont allow this.
In MIGO, system will do the goods issue based on reservation only. The reservation is created at the time of order creation and it uses movement type 261 irrespective of the order type.
I was trying to find out whether any option is there to use custom movement type to create reservation so that system would propose this movement type in MIGO for goods issue against process order.
This is an interesting case but unfortunately dont have any option of user exit or Badi. Only one user exit related to reservation is to change the str loc and back flush indicator.
@Sabine: Thanks for your reply. But the BADI that you provided wont serve the purpose.
Thanks
Prathib

At the time of Process order creation Batch determination

Dear All,
When i am creating process order at the time system not allowing me to execute batch determaination after release only it is allowing me to do.
My requirement is At the time of order creation i want assign batches ( Execute Batch Detrmination)for the material.
how to do this one, kindly hel me
Regards,
s.sakthivel

Hi sakthivel
Go to OPKP (Production scheduling profile) txn code and select in Batch management tab Automatic Batch creation at order creation (1) and check this profile is assigned to material in work scheduling view
Regards

Error during Process order settlement

Hi Gurus,
i am facing problem during the process order settlement. an error is occured is as follows: Tax code V0 country IN does not exist in procedure ZTAXIN.
actually this V0 tax code is assing to the ZTAXIN procedure & which is also assign to country. i couldn't get why it ask tax code during the settlement.
In Process order Itemization i find the 2 GL ( Element) in which there is one consumption GL & second is COFG sold GL. from GL Master i remove both GL Tax category & also remove the click from posting without tax allowed. till i am facing this problem?
Please help me to overcome this issue.
Point will be rewarded if question solved.
Than'x
Dhananjay R

hi gopan,
Than'x for attention on my question. till my problem is not solved. during the process order why it hit the tax code? would u please guide me how to find the tax code assignment which hit during the process order settlement?
i have check all the Tax related setting till this issue not solved. ( Check calculation procedure (OBYG), Tax code assignment (FTXP), also check the Tax Account Integration (OB40).
also i remove tax related assignment from the GL master related to specific gl which are display in component structure.
pls help me to solve this issue..
Than'x
Dhananjay

Error in Process Order Creation

Similar Messages

Maybe you are looking for