Error in propogating to i/p attributes in case of relationship MBOs....

Hi Experts,
while developing an SUP application i am creating 2 MBOs (from two different BAPIs ofcourse) and making a relationship between them.
1. BAPI_FLIGHT_GETLIST (here i am choosing flight_list as a parameter to be mapped as output attributes)
2. BAPI_FLGHT_CHECKAVAILIBILITY(here i am choosing AIRLINEID, CONNECTIONID, FLIGHTDATE as input arguments and AVAILIBILITY as a parameter to be mapped as output attributes.
for input arguments i am giving some default values :> LH, 0400, 28-02-1995 since it was not moving to next screen without them).
then i am making an one to one mapping with unchecking birdirectional option and relating AIRLINEID, CONNECTIONID, FLIGHTDATE from one MBO to second MBO.
my qustion is ::
when i am creating an online Cache Group which MBO should i select ? there are 2 MBOs showing up.
(i selected one MBO creating with BAPI_FLIGHT_GETLIST and i need to propogate one attribute to one of input attributes
but it is showing error saying it can not be get propogated in relationship with MBOs.
what could be the possible solution ?
Regards,
Jitendra Kansal

Nevermind, I figured it out this morning. The CDs that I have ripped in 192 all load up good without errors and I just have to drag CDs that are ripped in VBR by transferring 2 songs at a time to get it all loaded up. That is weird, but thank goodness it had nothing to do with iTunes. I was just confused... that's all.

Similar Messages

An error occured while creating the original attribute for message no26 296

Hi All,
I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
An error occured while creating the original attribute for
Message no. 26 296
Diagnosis
An error occured while creating an original in the Knowledge Provider.
System Response
The original could not be created.
Procedure
Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
Please let me know what configs i am missing ...
Thanks in advance
regrds
pushpa

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:la

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

An error occured while creating the original attribute....

Hello Gurus,
I am getting an error message when I try to save a document using CV01N. It says:
"An Error occured while creating the original attribute for XXX"
Can someone please help me here ?
Regards,
Rajesh.

We get the same error message sometimes but then the documnet already is created. Trouble then is that s an inconsistence in the KPRO.
There is an incomplete/orphaned LOIO (logical object identifier), incomplete means that there is no original associated to it.
Don't know why this happens but we fix by doing following.
I run transaction SE38 and execute program DMS_KPRO_CHECK1
In bottom of the result list there is a section called: Loios in DMS without reference to KPRO. These documents have a LOIO but no original.
This can be checked running transaction SE38 and execute program DMS_KPRO_READ.
When the document is checked in DMS_KPRO_READ I go back to DMS_KPRO_CHECK1, and delete the LOIO.
The inconsistency will then be cleared.
Hope this can be of any help for you.
Regards
Daniel

An error occured while creating the original attribute for

Hi All,
We encounter this error in "An error occured while creating the original attribute for " DMS very often when a user edits a file & tries to check in.
I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
inconsistencies will repair this issue.
I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
Regards
-Neha

Hi Neha,
Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
DMS_ACTIVE_VERSION 00 Active Version
DMS_APPLICATION 00 Logical application
DMS_CHECKOUT_USER 00 Checkout User
DMS_CREATE_AUDIT 00 Generate new version of the original
DMS_DEFAULT_LANGUAGE 00 Default Language
DMS_DELETEABLE 00 PHIO deletable
DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
DMS_DOC_VERSION 00 Version of relevant document
DMS_DRAW_APPNR 00 Application number from DRAW
DMS_DRAW_DTTRG 00 Data carrier from DRAW
DMS_DRAW_FILEP 00 File name from DRAW
DMS_FILE1 00 File name(firstpart)
DMS_FILE2 00 File name(secondpart)
DMS_FILE3 00 File name(thirdpart)
DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
DMS_FRMTXT 00 Format description, ID of additional file
DMS_MUP_CAT 00 Markup category
DMS_MUP_FLAG 00 Markup flag
DMS_ORDER 00 Sequence of additional files
DMS_STATUS 00 Document status
DMS_STATUSNR 00 Number in status protocol
DMS_STATUSNR_X 00 References to Status Log
Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
For further information you can also see the corresponding SDN WIKI page under
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
Regards,
Ravindra

ERROR: spry:region or spry:detailregion attribute has no data set!

here's the basics...
i'm running fusebox for php (if that makes any difference)
i'm also reusing the same gallery for multiple fuseactions,
and using my circuit.xml file to set the var $gallery
depending on which fuseaction has been called.
the photos already exist in a database and full size and
thumbs have already been created by imagemagick
i plan on writing a script that uses imagemagick to get the
dimensions of the imagefiles and saves them to four respective new
columns in my db table (so i hope the problem isn't related to the
height attributes not being set in my xml.... let's hope it's
somthing else, ok?)
i'm creating my datasets like this
quote:
var dsGallery = new Spry.Data.XMLDataSet("/index.php",
"gallery", { method: "POST", postData: "do=m.get<?php echo
$gallery ?>Gallery", headers: { "Content-Type": "text/xml" });
var dsPhotos = new Spry.Data.XMLDataSet("/index.php",
"gallery/photos/photo", { method: "POST", postData:
"do=m.get<?php echo $gallery ?>Gallery", headers: {
"Content-Type": "text/xml"});
the output xml is perfect... here's an example
http://www.inkincnewyork.com/index.php?do=m.getFlashGallery
since i'm reusing the gallery, and have no need for the
dsGalleries related functionality i did this.
using the long way of referencing each piece of data, just to
make sure it's all kosher
quote:
<div id="thumbnails" spry:region="dsPhotos dsGallery">
<div spry:repeat="dsPhotos"
onclick="HandleThumbnailClick('{ds_RowID}');"
onmouseover="GrowThumbnail(this.firstChild,
'{dsPhoto::photo/@thumbwidth}', '{dsPhoto::photo/@thumbheight}');"
onmouseout="ShrinkThumbnail(this.firstChild);"><img
id="tn{ds_RowID}" alt="thumbnail for {dsPhoto::photo/@thumbpath}"
src="{dsGallery::thumbnail/@base}{dsPhoto::photo/@thumbpath}"
width="24" height="24" style="left: 0px; right: 0px;"
/></div>
<p class="ClearAll"></p>
</div>
but i am now getting this error
spry:region or spry:detailregion attribute has no data set!
for each XMLDataSet
anyone have any ideas?

A few things I noticed when looking at your sample source
above:
The "Content-Type" should be the type for the post data, not
what you expect to get back. So in your case, you should be using:
"Content-Type": "application/x-www-form-urlencoded";
which is the default type so you don't really have to pass it
to the constructor unless you are posting something other than that
type.
Next, your {ds_RowID} data references are missing the data
set prefix. If you use more than one data set for a given region,
you need to use the prefix to make sure you are getting the
ds_RowID from the correct data set.
The error: "spry:region or spry:detailregion attribute has no
data set!" tells me that the data sets are not defined at the time
Spry first processes the region. Are your data sets being created
in a script tag in the head? Or are you creating them in some
function that gets fired off at a specific time?
--== Kin ==--

HT201250 error: a disk you are backing up is case sensitive, but the backup disk is not.

Time Machine error: a disk you are backing up is case sensitive, but the backup disk is not.
How do I reformat my backup drive to backup a case sensitive hard drive?

See here, for example. Do not select MS-DOS, but use the default "Mac OS Extended".

Error Message in Query Filter on attribute of 0MATERIAL filters charac.

Hi All,
i have a query with few variables , i used navigational attributes of 0material......
I am getting the below Warning Message... Ineed to supress the below Error Message....
Please let me know the solution...
Error Message: Filter on attribute of 0MATERIAL filters charac. values without master data
Diagnosis
Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
For performance reasons, this filtering is unavoidable.
System Response
Procedure
In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
Procedure for System Administration
Notification Number DBMAN 345
Thanks All

Dear all SAP Gurus,
we've solved this problem and this is the solution:
The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
Regards, Clemens

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error when Refresh Planning after adding attribute V9.2.1

Has anyone encountered this and what is the solution:
Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
Career is the dimension and Decanatura is the attribute added
Using 9.2.1
Thanks
Jeff

Hi Jeff,
please find some findings from planning DBAG which may be useful to resolve your issue:
You can assign attributes only to sparse dimensions.
You cannot assign attributes to label-only members.
After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
You must assign attribute values to dimension members at the same member level within a dimension.
You can define attribute values for Entity, user-defined custom dimensions, and Account
members if the Account dimension is designated as a sparse dimension in all plan types. You
can then assign attribute values to members of a dimension.
Attribute values for an attribute must be assigned to the same-level sparse dimension members.
Assigning an attribute value to another level causes an error during the application refresh.
hope this helps.
www.dornakal.blogspot.com
Edited by: Dornakal on May 28, 2009 5:55 AM

Error when build cube - A duplicate attribute key has been found when processing...

Hi all,
I got an error “Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table…” when built new cube. It looks strange in my case. I created a small example to re-produce this error as below:
I create a data source table as below
AgencyName(varchar(50))-----MediaSpend(float)
OE------------------------------------100
Œ-------------------------------------200
Then I create a cube base on this data source with a dimension AgencyName and 1 Measure MediaSpend.
The error happened again. This look link a special case when ‘OE’ and ‘Œ’ existed in a dimension.
Do you have any ideas on this?
Thanks,

Hi khoana,
Here is a similar thread about this topic for your reference, please see:
A duplicate attribute key has been found when processing:
http://social.technet.microsoft.com/Forums/en-US/sqlanalysisservices/thread/7c72639b-a050-4243-9f1d-4da906e981d5/
Regards,
Elvis Long
TechNet Community Support

Error occur after try to add attribute for ViewObject !!

Hi
Please someone help to suggest me !
I have added filed in database table and I want this filed show on my UIX page. So I added new attribute to EO and VO which declare for this table. After that I add this field to my page . I run program but error is occured.
Error show that
Error
1.Invalid column index
2.JBO-25046: Requested row not available in row set iterator WorkflowsAllVO1.
How should I do to correct this problem ?
Thanks

Now I can correct the problem ! In my viewobject I use expert mode for query and I forgot to add new column to query.

SQL Report Display Error when change LOVs In Report Attribute.

Dear Friend,
i have created SQL Report .Now In Agent Name Column ,Agent_code is Display .
i want to display Agemt Name In to Agent_CODE Column so i have change in Report Attribute-->edit column AGENT_CODE-->Tabular Form Element-->Display As text (Based on LOV,Does not save state) -->List of Values -->Agent_name
Apply Changes .
Then it show me Below Error in Report
report error:
ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too smallHow to resolve it?
Thanks
Edited by: Vedant on Sep 5, 2011 10:06 PM

Dear Jari,
yes i am not using Named LOV ,
i am follow
Report Attribute-->Tabular Form Element-->Display As text (Based on LOV,Does not save state) -->List of Values -->Agent_nameThen Show me Error.
thanks
Edited by: Vedant on Sep 6, 2011 1:37 AM

Error in table binding (Select an attribute of type string)

Dear All,
I'm doing the <i>TUT_FLIGHTLIST</i>example of the webdynpro. Now i'm struck at the step of Table Binding. <b>System says that error for UI element...select an attribute of type string.</b>. Please suggest.
Thanks,
Anup.

Hi,
May be you trying to bind TextView UIElement in table to a contextAttribute of type other than "String".
Please change the UIElement type.
Regards, Anilkumar

Error in propogating to i/p attributes in case of relationship MBOs....

Similar Messages

Maybe you are looking for