Error in Receiver Email adapter
Hi
I have done one scenario as file is sender and mail is receiver.
In message monitoring it is giving success whereas mail is not generated..
I have checked receiver mail adapter it is giving the following error:
<b>error occured: [2006-01-09T06:36:47Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.SocketException: Software caused connection abort: connect</b>
can any body suggest me to solve this problem
Thanks
N.Prasad Babu
Hi prases,
Check the configruation of your mail adapter. Hope this link helps,
sender mail adapter
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
receiver mail adapter
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
regards,
bhavesh
Similar Messages
-
Need help for Adapter Specific Message Attributes in Receiver Email Adapter
We want to use Adapter Specifice Message Attributes(ASMA) in Receiver Email Adapter for sending the mails dynamically, and to set the CC and BCC. I have gone through the help give in <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm">SAP Help</a>
not clear how to use it. Please help to configure this.Any blogs?
with regards,
Ravi SiddamHi Kumar,
This blog explains about using 'Mail Package' option. We have already gone through this link and configured as explianed. 1.it dosen't support CC,BCC and 2. it is old way.
We are on PI 7.0. It is recommended to use ASMA and in this it is possible to use CC and BCC.
We don't know how to use ASMA. any help?
with regards,
Ravi Siddam -
Filename attachment to dynamic email address in receiver email adapter
Hi,
Can i send a file with dynamic name to a dyanmically generated Email Id as attachment using receiver Email adapter ?
Thanks
Rupesh KumarHi,
I had gone through the links given , but it doesn't answer my question completely. I think i need a java code to send dynamically generated filename to be send to dynamically generated email ID.
The file name and the email Id is available in the sender adapter.
This filename should be send as attachment to the Email Id using receiver Email adapter.
Thanks & regards,
Rupesh -
File Conversion error in Receiver File Adapter
Hi ,
I am facing the below error in receiver file adapter .
Conversion initialization failed: java.lang.Exception: java.lang.NumberFormatException: For input string: "4|8|10|2|10|4|10|4|40|40|40|1|20|2|20|8|40|0|12|12|12|1|12|4|4|8|40|8|8|8|8|12|40|8|10|10|10|10|10|1|10"
Kindly suggest !
Regards,
HemanthikaHi,
Check it - File adapter is active ? try to Re-activate the same.
Also do CPACache Refresh.
Still problem, tyr out by restarting the Adapter Engine.
I guess you're just trying to send all the data in your file record to a <data> element as a whole. If so, this blog will help you:
Configuring Generic Sender File CC Adapter
Under certain operating system platforms, such as Solaris, the APIs used by the Java Runtime (JRE) are not Unicode-aware. Consequently, the JRE needs to be configured to correctly interpret the character set it receives from the operating system.
This is configured through the "file.encoding" system property as well as the "LANG" environment variable.
Make sure you set "file.encoding" to a character set (such as ISO-8859-1) that supports the special characters you would like to process. This system property can be configured by appending "-Dfile.encoding=<encoding>" to the Java VM parameters section of the SAP J2EE Config Tool.
Additionally, you need to set the "LANG" environment variable to a locale that supports more than 7 bits, such as "de.ISO8859-1". The encoding you specify in the LANG environment variable needs to match the encoding set via "file.encoding".
You can persistently configure the environment variable by setting it in the profile $HOME/.sapenv_$HOSTNAME.csh of the <sid>adm user: setenv LANG de.ISO8859-1
Refer this article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
See below link
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please refer this thread .
File Adapter Not Initialized Error
Cheers,
Regards,
Suryanarayana -
Error In Receiver BC adapter(EOIO not supported by protocol BC.)
Hi Experts ,
My Scenario is ABAP proxy to SAP BC .I had bellow error in Receiver BC adapter .
Adapter Framework caught exception: Delivery semantics EOIO not supported by protocol BC.
Error Delivering the message to the application using connection BC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.InvalidParamException: Delivery semantics EOIO not supported by protocol BC..
Please help how to resolve this .
Regards
Upendra.V
Edited by: upendra v on Oct 4, 2010 2:08 PMHI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen -
File to JMS Scenario - Error is Receiver JMS Adapter
Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318) -
Attachments in email whit receiver email adapter
hello!
it's possible to send a a file attached into a email whit a receiver email adapter?
i want take this file from a directory (example whit ftp adapter) and send via email whit XI.
this is a PDF file and NOT generated from payload.
thanks
Alexalessandro..
Check out the links below..might help walk you through it..
http://www.riyaz.net/blog/index.php/2008/02/23/xipi-sending-emails-using-xi-mail-adapter/
This is a complete how to pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992
Hope that helps
Regards
Ravi Raman -
SP14 Multi-mapping - error in receiver idoc adapter
Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- <!-- Technical Routing
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
DanielHi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
<i>CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only</i>
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter -
Error in Receiver File adapter using File content Conversion
Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
AparnaHi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit -
How to send only one (of several) attachment from a receiver email adapter?
Hi all,
I have been working with the SAP XI email adapter for some time and now I encountered the following challenge:
I am receiving a message via email from a partner, call some modules which lead to the generation of 5 attachments in total for the incoming message.
I then map the MainDocument to a CONTRL message and return it to the sender using the dynamic parameters of both the sender and the receiver email cc.
I am filling these parameters inside the message mapping; so far I am not using the mailpackage xsd (the only things out of the ordinary are checked boxes for "use adapter specific parameters", "variable transport" and "keep attachments").
My problem is that the email receiver cc now generates an email with 5 attachments when I need it to add only the CONTRL (aka MainDocument) as attachment to this email.
Do you know if there is a way to tell the receiver cc to only use one attachment (or to remove attachments from the original message, f.ex. inside the message mapping)?
Thanks and cheers!
StefanHi Stefan,
>>>>Do you know if there is a way to tell the receiver cc to only use one attachment (or to remove attachments from the original message, f.ex. inside the message mapping)?
1. It cannot be done in a mapping
2. have a look at mz blog
how simple it is to write an adapter that will do what you need
(just check the delete part of this blog):
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Error at Receiver File Adapter
Hi All,
Mine is FILE (txt) to FILE (txt) scenario with content conversion.
No problem from SENDER FILE adapter.
No problem in XI pipeline processing.
Error at receiver adapter:
The eror is:.. 1.fieldSeparator is missing or 1.fieldFixedLengths is missing...
Though, I have checked at Receiver Adapter configuration that
*.fieldSeparator is properly filled.
There are no optional fields as such in the input file.
Thanks,
ShailyHi,
Check the links on FCC and compare what u have gave is correct or not.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful -
Error in Receiver File adapter - FCC
Got error message as "File Adapter Receiver Channel CC_OB_REQ: Not initialized - cannot proceed: null"
My requirement is to send IDOC to file which consists of 4 fields, My target message interface is
MT_REQ
FILE_STRUC
FILE_OP
AAA (Field1)
BBB(Field2)
CCC(Field3)
DDD(Field4)
Output file should contain the above 4 fields with fixed lengths 20,1,1,2
So I declared FCC in File Adapter as
I tried many options
RecordSet Structure: MT_REQ,FILE_STRUC,FILE_OP
FILE_STRUC.fieldSeparator - 'nl'
FILE_OP.fixedFieldLengths - 20,1,1,2
FILE_OP.fieldSeparator - 'nl'
FILE_OP.endSeparator - 'nl'.
Please let me know where is the problem?
Thanks in advance,
KrishnaHi Ramakrishana,
In FCC fixed length file format when your XML payload is goes to Adaptor engine, it should contain all fields in XML. Otherwise its throw error in FCC channel. Please check receiver payload at SXMB_MONI or message monitoring of Run time work bench. In that payload you will find that some of the fields is not generated in target payload.
Field in receiver payload is not generated means from sender payload corresponding field is not coming. As per my past experience this generally happens in IDOC sender.
solution:- In message mapping in every field from IDOC to file use mapWithDefault node function with null value. Due to this though if any field do not generates in IDOC, corresponding field will generate in File Payload and it will not throw error in FCC.
Regards,
Prashant -
Error at Receiver Mail adapter modules
Hi,
We have implemented a receiver mail adapter for producing Excel file as attachment.
It is giving the error as follows:
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of MessageTransformBean.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of MessageTransformBean..
This configuration has worked well earlier, and suddenly it is throwing this error.
Please let me know what might be the reson for this.
Thank you.
Regards
Bhanu.
Edited by: Bhanu Tiruveedula on Sep 15, 2009 1:00 AM
Edited by: Bhanu Tiruveedula on Sep 15, 2009 1:00 AMHi,
I didn't use the fullstop.
Can anybody help me in resolving this issue?
Thanks. -
Error in Receiver SOAP adapter - but ok in sxmb_moni
HI,
i am trying to call a WS wich takes only input. so it is a asynchronous call.
I configured CRM-XI-WS.
My sxmb_moni is ok in XI. But when i check Adapter monitoring it is throwing the following error... any help please..
2008-01-03 16:55:53 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 179). ---> The specified node cannot be inserted as the valid child of this node, because the specified node is the wrong type.
2008-01-03 16:55:53 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 179). ---> The specified node cannot be inserted as the valid child of this node, because the specified node is the wrong type.
2008-01-03 16:55:53 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 179). ---> The specified node cannot be inserted as the valid child of this node, because the specified node is the wrong type..
2008-01-03 16:55:53 Success The asynchronous message was successfully scheduled to be delivered at Thu Jan 03 17:00:53 CST 2008.I changed my structure to a smiple structure... still i am getting the error...
even i tried taking the payload from sxmb_moni and tested the mapping in IR .. it is failing... saying: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
my payload is :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:HSBP_Out_MT xmlns:ns0="http://tsfco:A_TSFCO_CRM_WS_COMM_SWC:CD:HsBpFromCrm">
<Name>test</Name>
</ns0:HSBP_Out_MT>
Edited by: ashok sri on Jan 4, 2008 1:14 AM -
Error in receiver Mail adapter: Client was not authenticated
Hi.
My requirement is to send email via PI to an extermal mail address. I am trying to use the following configuation for the same.
Tramsport Protocol: SMTP
Message Protocol: XIPAYLOAD
URL: To get the value of URL, execute transaction SCOT in PI system. Double click on SMTP and get the Mail host from there (name). So the URL has been specified as smtp://name
Comfigure User authentication - Checked
User: My outlook email address
Password: My outlook email password
From: My outlook email address
To: External address to which the email needs to be sent
Content encoding: base64
But the email is not getting sent. when I check the adapter engine I see the errors:
Mail: error occured: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
MP: exception caught with cause com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Adapter Framework caught exception: Failed to call the endpoint
Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated.
Can anyone please suggest what changes are needed to make this work?
Any help is greatly appreciated.
Thanks.
Anuradha.HI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen
Maybe you are looking for
-
Fail to create temp file in Oracle 10g on CentOS
My disk is full so I delete six temp files and create only one, but when I execute this SQL give me this error. I know i have more than 4GB free space but i don´t know what problem is happen. ALTER TABLESPACE temp ADD TEMPFILE '/oracle/oradata/ral/te
-
Number of connections with JSP pool cache
I'm using a Bean from examples, its name: "ods", this is Pool Connection Cache, when a user start connection, this open 10 connections. In my project works 20 users, the DBA prefers don't use too many connections. The version of DB is 8.1.7 and web s
-
Tax Management setting - goods and services
Hello SAP experts, In my DMEE for tax declaration (tree type USM1), I need to distinguish tax codes for goods and tax codes for services. Is there any setting to distingsuish both type of tax? I have checked the data dictionary for table T007A but I
-
WebUtil gives FRM-40735 When-Custom-Item-Event ORA-06508 when starting form
I have downloaded and installed/configured webutil on RH Linux AS2.1 per the manual and readme file. ( jacob.jar and webutil.jar signed on NT machine per instruction then loaded on LINUX server webutil/lib ) I have incorporated webutil with an existi
-
On the older versions of FF, I could always get the history of my tab by clicking the vertical arrow that was on the left side next to the navigation arrows. I really miss the feature, and now everything takes more time since I have to go back, go ba