Error in standard program RFBIBL00 - BBSEG-PRODPER 000000

Hi alls,
I'm tring to execute the standard program RFBIBL00 with a file prepared by a my Z program but it stopped with the following message:
BBSEG-SEND /
BBSEG-PRODPER 000000
Editing was terminated. "
I tried to execute the same thing with a file prepared by the standard program RFBIBLT0 but tye systems stopped with the same error.
I found the SAP note 1171612 and I applied it because I'm working on SAPKH6008 patches but the same error occured.
In order to solve my problem (I only have to execute the standard Batch Input!! and in this step I'm only verifying the file) What do I have to do?
thanks
Gino

Hello,
We get this error if the file format is wrong. The data depends on version too!!
Are you doing Batch input by using ZBSEG?
If yes, prepare file as per ZBSEG in ur system like below example.
If suppose ZBSEG has structure like below.
STYPE     STYPE_BI     CHAR     1
TBNAM     TABNAME     CHAR     30
NEWBS     NEWBS     CHAR     2
File should be like below.
1ZBSEG(25 spaces as it has to be 30 total)40
IF any field is blank, u should take special char / with same length which is in structure.
Above fields, wrbtr, prctr and newko are mandatory.
Then it should work.
check the test file format thoroughly
Regards,
Subbu

Similar Messages

What does the standard program RFBIBL00    does?

what does the standard program RFBIBL00    does?

Hi Bharath
Accounting Documents: Data Transfer Workbench
Definition
Transferring FI accounting documents from an external system into the SAP System using program RFBIBL00.
Use
You use program RFBIBL00 to enter accounting documents and to clear open items.
Method
Program RFBIBL00 primarily transfers accounting documents using the batch input method. However, you can also generate documents immediately using call transaction or direct input by means of the "Data transfer type" parameter. Both of these procedures lead to improvements in system performance when transferring large quantities of data (more than 10,000 transactions).
Object-Specific Settings
With call transaction or direct input, documents are posted immediately to the SAP System. As a result, you need to ensure that if for any reason the program is terminated, it can be restarted without inconsistencies occurring in the data.
other information:
To enhance the batch input procedure, the system offers the direct input technique, especially for transferring large amounts of data. In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not process screens. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or Transaction BMV0.
Examples for direct input programs are:
Program        Application
RFBIBL00         FI
RMDATIND       MM
RVAFSS00       SD
RAALTD11        AM
RKEVEXT0       CO-PA
Hope this helps u
thanks and regards
suma sailaja pvn

Syntax error in standard program after upgrade

Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
Ale

Hi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill

Can the standard program RFBIBL00 be run as a background job ?

Hi all,
Can the standard program RFBIBL00 be run as a background job for the call transaction mode.
As I tried I got the job cancelled with message"Job RFBIBL00: Data does not match the job definition; job terminated".
As i run it in foreground it executes properly.
Why is it failing in background? Please help.
Thanks ,
Stock

Hi,
You need to copy the program RFBIBL00 & modify the program to build the logic to upload through application server. Then schedule the modified program in background & it wl work.
Best regards,
Prashatn

LSMW-standard program RFBIBL00-two withholding information lines

Hi,
I am using a LSMW with the standard program RFBIBL00. The structure is BKPF , BSEG and WITH. I have a field for each one.
The problem is when I try to upload 2 lines for vendors in the same document which have withholdong information i cannot set in the WITH field and structure which withholding information is for each line.
Any idea or in this case I don't have other option than upload each line in different document?
Thanks,
Cecilia

hi zarina,
please send me the documents to my mail also
([email protected]),, waiting for your mail
thanks in advance ,,
krishna
Message was edited by:
Krishna Ramasamy

Batch input session to FB01 using standard program RFBIBL00

Hi all,
I am creating a batch input session using the standard program RFBIBL00 to simulate transaction FB01.
My problem is when I process the "batch input session" (using transaction SM35), this finish ok, but in the log I am retrieving the following message:
"Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0300"
This is a success message and the document is created ok,and the field DMBTR is informed ok.
Has somebody some idea?.
Thanks so much in advance for any answer.

Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
   we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
   job which will get triggered
   on event SAP_END_OF_JOB
   ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
   will do the FURTHER actions !
regards,
amit m.

Error in Standard Program for Purchase Order

Hello Everyone,
I am getting an ABAP Dump Error while Displaying & Printing Purchase Order using TCODE : ME9F & ME23N.
We have applied new Patches.
for Logistics it is 26 & ABAP it is 58.
I am getting Error in standard INCLUDE
Program : LMEDRUCKF1K at line 64.
The Error is :- "Field "ENJPREVIEW" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement."
Declaration for "ENJPREVIEW" is also available in
include LMEDRUCKTOP. still it gives an error.
These lines of code is included by SAP note 855263.
Before applying these Patches it was working properly, but now it gives an error.
Please , Can anyone give solution for this.
Regard's
Archana.

Hi Archana ,
Check is there any Inactive Versions in ur Systems ?
useful tcodes are SPAU /SPDD for tables
Regards
prabhu

Runtime error in Standard program "SAPMV45A"

Hi Expert,
i am getting problem in BDC , While creating the (sales order) VAO1 ,dump is occurs in standard program SAPMV45A. Because of in FM "Pricing_Dialog_Tabstrips" is incorrect and TAXI_TABSTRIP_C and TAXI_TABSTRIP_ITEM" specified here is a different field type.This is standard program we can not change field type. Kindly provide any OSS notes for this or any other solution.
STANDARD PROGAM - SAPMV45A
INCLUDE PROGRAM - MV45AF0F_FCODE_PKO4
ERROR - Runtime Error CALL_FUNCTION_CONFLICT_TYPE has occurred
Kindly help me, Its very uigent
Thanks & Regards
Md.MahaboobKhan

Hi Archana ,
Check is there any Inactive Versions in ur Systems ?
useful tcodes are SPAU /SPDD for tables
Regards
prabhu

Unicode Error in standard program

Hi,
Iam working on an upgrade project
I am getting an error as below
"In Unicode, DESCRIBE LENGTH can only be used with the IN BYTE MODE or CHAR mode"
How to fix this error, as the error is from STANDARD PROGRAM "Include /IXOS/LDC_CF01"
I know the answer to fix it, But since it is a STANDARD PROGRAM ,how to modify standard program\
Thanks,
Arjun

Dear Arjun,
I had to make some adjustment to an upgrade recently where we also had to upgrade programs to be UNICODE compliant.
And we had to do this for Custom and Standard programs.
So, before writing a message for SAP, go to transaction:
UCCHECK
It was using this transaction that I adapted my Standard SAP programs.
So you should be ok with this as well....
If you have been there already, then by all means do write a message to SAP.
Kind Regards
/Ricardo Quintas

Errors in standard programs after refresh

Hello Experts,
We recently upgraded our system to ERP EHP5.
Before that we have taken the refresh from Prod-QA system.
After the refresh there were transports which we didn't imported on QA since it was thought that the system should be tested as it is Prod.
But now the system are upgraded and we imported last 4 months transport including the SPDD/SPAU transports again,we are getting lot of dumps in standard programs like STMS,VA01 etc.
How should we correct this error situation and what will be best approach here.
Regards
Ajay Sandal

Hi Ajay,
The 4 months transports are from upgraded Dev system or Older SP transports ? Generally, pre upgrade Support Pack transports are not recommended in the upgraded system. You need to check the Objects which affect the upgrade Objects before importing the transports in the release notes.
If your transports from Older SP, then
I guess, you need to Restore the backup after the upgrade and recollect the transports with new objects.
2). Restore before upgrade backup, import the transports and upgrade again.

Transport error on standard program during transport of SPAU adjustments

Hi,
We are trying to transport adjustments made for SPAU into our Testing Environment. However, we encountered an error for program: AL01900R, Include MKGALF60: Syntax error in line 001861', 'Field 'DELTA_FGROUPS_REC' is unknown. It is neither in one of the specified tables nor defined'
First of all, the program and include were not modified and not included in the transport request. Not sure why it was being checked. But this is not a serious concern.
The 'DELTA_FGROUPS_REC' field declaration is indeed missing from the program.
Does anyone have any ideas how we can patch this? This is a standard SAP program, is there any way we can get latest code from SAP to patch (because usually OSS note only targets that include and not the entire program and its includes).
Thank you.
Regards,

Hi Snow,
I re-read the OSS note and tried to run allocation for it. Surprisingly, that action re-compiles the main program: AL01900R and now the data declaration is generated automatically. So yes, it works now.
Thank you very much for the suggestion!

Error in standard program,unabel to inerept 0 as a number

Dear all
          This is the following error which iam getting in ABAP run time log for every 4 minutes can any one please tell me the solution of this problem.
          Name error: convt_no_number.
          Exception:cx_sy_conversation_no_number.
          Program:RSDSPROC
          tat the system can not handel the value "0" since it expecting floating point and just "0"is not floting

Hi Sunnel
Kindly go thru the below sap Note 1144644 - CCMS: Process monitoring in ABAP returns incorrect data
Regards
S

Exceptional error in standard program..........?

Hi ,
I have a ticket which has an issue in Transaction CL03. Which
gets a dump when tried to expand the tree structure.
The error says " An incorrect exception" and this is in standard report.
Can any one tell me what to do with this error and how to resolve it. if its from standard report.
Pls get back to me if you want more info.
Regards,
Rajesh.

hi
good
i would suggest you to check with the user exits available for this particular transaction code, and check in which user exit you can do the required changes to get your functionality.
thanks
mrutyun^

Error during background processing which is created by Std.program RFBIBL00

Hi Gurus,
     I am using standard program RFBIBL00 to generate batch session for the Tcode FB01.
     My BDC is working fine , if i choose foreground or display error only option in SM35.But when i process the same session in
     background it is giving error Field BSEG-DMBTR does exist in SAPMF05A 0302.
                             One more thing i want to point out when i process the session in forground or in display error only option
                  there i am getting information message Field BSEG-DMBTR does exist in SAPMF05A 0302. But for background due to same message i.e (Field BSEG-DMBTR does exist in SAPMF05A 0302) session processing is failed.
                                Actually through ZProgram data being uploaded to application server. Then i am executing std. program RFBIBL00 to generate session.And when i go to SM35 & choose the just created session for background processing,then processin i failed.
                          We have recently upgraded from 4.7 to ECC 6.0. Previously RFBIBL00 program is working fine but after upgrade it is not working.
               Please give your valuable suggession.
Regards,
S C Patil.

How are you related to this almost identical problem?
Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302
Thomas

How to extract data in order to create file for using program RFBIBL00?

Hi all!
In order to correct data in mass I need to select corresponding data (3000 FI documents) and extract these into a file in order to correct a field. This extract must having segment 1BKPF 2BSEG... the same file structure than in SXDA_TOOLS for FI documents.
Which program must I use in order to have the correct extract in order to use the standard program RFBIBL00 for creating FI document?
Must I create a specific program in order to create this file or only administrator can do this?
Thanks for your help!
David

Hi
RFBIBL00 is arranged on main strucuters BGR00 (for batcinput session data), BBKPF (for header data) and BBSEG (for item data).
Both structures BBKPF and BBSEG have to be filled, but only the fields have to be used or changed, the rest of the fields have to have the symbol for NO DATA, i.e /.
So there are no standard program can do it automatically, so it needs to creaste a program ad hoc....but it can use the Legacy System Migration Worbech (transaction LSMW) in order to do it,
so your problem can be really how to extract the data to be elaborated by LSMW, but you can do a simple query by se16 and download the result in a excel file
Max

Error in standard program RFBIBL00 - BBSEG-PRODPER 000000

Similar Messages

Maybe you are looking for