Error in system....

hi vijay
while executing program i'm getting this error only in my system but it is get executed in other system...
E:\raghav>javac RoomArea.java
E:\raghav>java RoomArea
Exception in thread "main" java.lang.NoClassDefFoundError: RoomAreai have set classs path also correctly
all programs getting problem.... please help
please reply me.....
regards,
R.Raghavan.....

its only classpath problem,
e:\raghav> set classpath=.;%classpath%;
e:\raghav> java RoomArea
copy this bold line and paste it in your console and try,

Similar Messages

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Windows Server 2012 VSS error "The system writer is missing"

Hello All,
I have a HP server that I have just installed Server 2012 standard, SQL Server 2012 and Sharepoint 2013.
When I try to take bare metal backup I get the error: "The system writer is missing", I have tried the backup as the local admin and domain admin.
The backup will only work if I decide to back up C:, once I select "Bare Metal" or "System State" the backup fails.
I have tried this solution: http://technet.microsoft.com/en-us/library/cc734021.aspx but have not had any luck yet.
When I run the command "vssadmin list writers" I can not see "System Writer" listed.
How can I add/turn on the System Writer?

Hi,
The system writer fails due to the fact that the trusted installer & system accounts are missing permissions to files in the directory %windir%\winsxs\filemaps\.
To resolve this issue, please run the following commands from an administrative elevated Command Window:
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
For more information, please also refer to the following links:
Discussion Forum FAQ: VSS System Writer is missing.
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/0b1eb10a-d666-4f5e-b657-c93b1d754a7f
Failure during Windows Server 2008 System State Backup & System Writer Missing
http://blogs.technet.com/b/chrad/archive/2009/11/18/failure-during-windows-server-2008-system-state-backup-system-writer-missing.aspx
Regards,
Arthur Li
TechNet Community Support

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

Entries appearing in Service Tax Control Account due to Error in System

Hello Experts,
     I am facing a problem in one particular GL i.e.Service Tax Control a/c
error-Entries appearing in Service Tax Control Account due to Error in System
entries are- Service tax control   a/c   -
Dr. 21,621.86
                        To Service Tax Control a/c     Cr.      21,621.86
My question is when i am making entry as Service tax Dr-21,621.86,Service Tax Cr.21,621.86,so it will adjust,and in FBL3N amt will show 0 but it was showing 21,621.86
Plz Guide me asap,very urgent issue
Thanks in Advance

Dear,
What was the balance before you posted the below entry?
Also run FBl3N with correct date parameters..
br,Vivek

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

attach a screenshot of the error message.

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Gets error "-17502; System Level Exception" while running the custom Step in NI TestStnad 2010

I have a custom teststand step which works like For loop in TestStand. Previously I was using LV 2009 and NI TestStand 4.2.1 and this step was working fine. Recently I upgraded my system to LV 2010 and TestStand 2010, since that it is not working.
When I run the step it gives error "-17502; System Level Exception". I have attached error screenshot.
I am using NIFlowControl.dll in this step.
Please do the needful.
Attachments:
System Levle Exception error.JPG ‏25 KB

The source code for NIFlowControl.dll ships with TestStand. Did you perhaps
1) modify the code and rebuild this dll in teststand 4.2.1, but did not move your changes into the 2010 version and recompile the 2010 version?
Or
2) Move your 4.2.1 version of this dll to 2010 in which case it might be missing important code that exists only in the 2010 version. It's best to redo your code changes to the 2010 version and recompile that if needed.
Also ideally your modified version of NIFlowControl.dll should be located in the teststand public directory rather than the program files directory.
-Doug

Error "602" System error: AK Datapart too short

Hi all,
Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around.
Anyway here it is:
While running a compression in BW we get Error "602" System error: AK Datapart too short.
This is happening while doing a select statement during the compression of the infocube. It does not happen all the time, just kind like when ever it feels like. The only note I could find in OSS was one about Live Cache and it does not seem to apply.
Here is the dump which I really hate doing this, but it gives all the info needed :
untime Error          DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
Date and Time          08/15/2007 12:23:09
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error "-602" occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "System error: AK Datapart too short"
Database error code .......: "-602"
Triggering SQL statement...: "INSERT INTO "/BIC/EZPSD_C03" ( "KEY_ZPSD_C03P",
"KEY_ZPSD_C03T", "KEY_ZPSD_C03U", "KEY_ZPSD_C031", "KEY_ZPSD_C032",
"KEY_ZPSD_C033", "KEY_ZPSD_C034", "/BIC/ZNET_ASP" ) SELECT ? ,
F."KEY_ZPSD_C03T", F."KEY_ZPSD_C03U", F."KEY_ZPSD_C031", F."KEY_ZPSD_C032","
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"GP31VIZWJDTT90894L1IA5YAC7G" or "GP31VIZWJDTT90894L1IA5YAC7G"
"TRANSFER_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"TRANSFER_ALL"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "sdcbw03"
Network address.......... "10.64.18.76"
Operating system......... "Linux"
Release.................. "2.6.9-55.ELsmp"
Hardware type............ "x86_64"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 21
Short dump setting....... "full"
Database server.......... "sdcbw03"
Database type............ "ADABAS D"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Nov 5 2006 19:46:34"
Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version......... "SAPDB 7.5.0.030 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "MaxDB 7.5.0"
SAP database version..... "640"
Operating system......... "Linux 2.6"
Memory usage.............
Roll..................... 16192
EM....................... 20949280
Heap..................... 0
Page..................... 24576
MM Used.................. 9235016
MM Free.................. 3331560
SAP Release.............. "640"
User and Transaction
Client.............. 011
User................ "ALEREMOTE"
Language key........ "E"
Transaction......... " "
Program............. "GP31VIZWJDTT90894L1IA5YAC7G"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "GP31VIZWJDTT90894L1IA5YAC7G" in
"TRANSFER_ALL".
The main program was "RSPROCESS ".
The termination occurred in line 573 of the source code of the (Include)
program "GP31VIZWJDTT90894L1IA5YAC7G"
of the source code of program "GP31VIZWJDTT90894L1IA5YAC7G" (when calling the
editor 5730).
The program "GP31VIZWJDTT90894L1IA5YAC7G" was started as a background job.
Job name........ "BI_PROCESS_COMPRESS"
Job initiator... "ALEREMOTE"
Job number...... 12185102
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "TRANSFER_ALL" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "GP31VIZWJDTT90894L1IA5YAC7G ". Its source code
starts in line 557
of the (Include) program "GP31VIZWJDTT90894L1IA5YAC7G ".
Source Code Extract
Line
SourceCde
543
ENDIF.
544
545
COMMIT WORK.   " commit and close cursors
546
547
l_str = i_max_requid.
548
PERFORM msg_append(saplrscondense)
549
USING    'S' '355' l_str space space space
550
CHANGING c_t_msg.
551
552
ENDFORM.                               " CONDENSE_FACTTABLE_NEW
553
554
555
     Form TRANSFER_ALL
556
557
FORM TRANSFER_ALL USING i_ref_update       TYPE rs_bool
558
i_pdimid           TYPE I
559
i_pdimid_ref_point TYPE rsd_sid
560
i_pdimid_normal    TYPE rsd_sid
561
i_recordtp         TYPE rsd_sid
562
CHANGING e_ref_ins_cnt TYPE I
563
e_ins_cnt     TYPE I
564
c_t_msg       TYPE rs_t_msg.
565
566
CALL FUNCTION 'RSDU_INFOCUBE_INDEXES_DROP'
567
EXPORTING
568
I_INFOCUBE = 'ZPSD_C03'
569
I_FACTTAB = '/BIC/EZPSD_C03'.
570
571
572
EXEC SQL.
>>>>>
INSERT INTO "/BIC/EZPSD_C03"
574
( "KEY_ZPSD_C03P"
575
, "KEY_ZPSD_C03T"
576
, "KEY_ZPSD_C03U"
577
, "KEY_ZPSD_C031"
578
, "KEY_ZPSD_C032"
579
, "KEY_ZPSD_C033"
580
, "KEY_ZPSD_C034"
581
, "/BIC/ZNET_ASP"
582
583
SELECT :i_pdimid_normal
584
, F."KEY_ZPSD_C03T"
585
, F."KEY_ZPSD_C03U"
586
, F."KEY_ZPSD_C031"
587
, F."KEY_ZPSD_C032"
588
, F."KEY_ZPSD_C033"
589
, F."KEY_ZPSD_C034"
590
, SUM( F."/BIC/ZNET_ASP" )
591
FROM "/BIC/FZPSD_C03" F
592
WHERE F."KEY_ZPSD_C03P" = :i_pdimid
Any thoughts would be helpful,
Thanks,
David

This error usually occurs when there is a database lock or no space in teh database. Got DB02 and Click on Space critical objects to see whether any entries are there. If yes contact your basis to increase the space.
Hope this helps
Thanks,
Satish

Error : Logical System is not defined

Hi Experts,
I have installed SAP CRM 7.0 IDES . But when i am trying to exectute Transaction Code /nbp ( Business Partner Creation) system is giving an error 'Logical System is not defined ' and i am not able to execute the transaction.
Kindly explain how to define the logical system.
Regards,
Rohit Tripathi

Hello Rohit,
To solve the problem you should proceed as described in the long text of the error message B2 001 and maintain the logical system for the current client via transaction SCC4.
The reason for this error is that the ALE outbound of business partner is activated. If you don't want the ALE messages to be generated when business partner is changed then you can disable the ALE outbound. To do that, go the maintenance view CRMC_BUT_CALL_FU and disable the following function modules if active:
BUPA_OUTBOUND_REL
BUPA_OUTBOUND_ALE_REL
I hope this could be helpful.
Best regards,
Maggie

2011 macbook pro OSX maverick, error: storage system verify or repair failed

Hi there,
My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
I also get: error, storage system verify or repair failed.
S.M.A.R.T staus is verified
None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
Any ideas???

I have the same issue. Not able to fix it.

Error: Storage system verify or repair failed

My MBP frooze a couple times yesterday; I loaded Disk Utillity and with the top level "122.33 GB APPLE SSD" selected I tried both "Verify Disk" and "Repair Disk." I get a pop up that says, "Alert: Storage system verify or repair failed." On the detailed section it states: "Problems were found with the parition map which might prevent booting. (In red letters) Error: Storage system verify or repair failed." When I select "Macintosh HD," I encounter no problems with Repairs or Verify Disks/Disk Permissions. I have always been able to select both and do the Verify/Repair options and haven't had any errors. I am running Lion and do have encrytption enabled. When I boot in recovery mode, I am able to Verify and Repair Disks on the "122.33 GB APPLE SSD" level without any problems. Only when I boot normally and attempt to Verify or Repair the top level. I am thinking its an encryption related error and not actually an issue. Any thoughts?

My sert up looks simple in 10.6 and 10.7 disk utility             500GB Physical HD
                                 slightly to the right virtual volume partition (icon)1 Mountain Lion
                                                                                                        2 Lion
                                                                                                        3 Snowleopard
                                                                                                        4 empty
In Lion Disk Utiity on First Aid if I choose 500HD and repair disk In red it states alert storage system verify or repair failed disk permissions are greyed out that means they can not be clicked.
If I choose Mountain lion (I am booted in Lion) it will repair permissions and veryfy and repair disk.
If I choose Lion (I am booted in Lion) it will verify and repair permissions but only verify disk. NOT repair !
( it is said it can not repair itself so we need to be booted into lion recovery disk disk utilities)
If I choose Snow leopard (I am booted in Lion) it will verify and repair permissions and verify and repair disk.
In Mountain lion the partition map or set up is strange.
                                                                             500GB Physical HD
                        slightly to the left virtual volume partition (icon) 1 Lion
                            slightly to the right virtual volume partition (icon) 2 Lion
                        slightly to the right virtual volume partition (icon) mountain Lion
                       slightly to the left virtual volume partition (icon) mountain Lion
                                                                                           3 Snowleopard
                                                                                           4 empty
Do I have 6 partitions 2 Lions 2 Mountain lions?
And on Mountain lion and lion on sub volume only FirstAid and Partition is shown not erase or restore !
In Snow leopard disk utility Mountain lion and lion shows as incompatable so can even partitioned or repaired.
When partitioning and installing 3 OSX's on 1 HD the partition table changes with Mountain lion and Lion.
And if you have Vile fault turned on you can not access the Mountain lion and lion repair permissions and repair disk ,also can not access the recovery disk when booting using options.
That means you have to turn Vilefault or Gate keeper off.
Apple Japan said it does not support more than one OS per HD !
It is a resl mess they do not fix these things and show photes and explanations of different scenrios on disk utility.
we want to use all our OSX/s on the same machine because many applications do not work on different platforms.
They should work out a solution when bring out new OS

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Error while System copy in Sapinist

Hi All,
i found an error while system copy ABAP + Java in SAPinist
Error is
CJS-00030 Assertion failed: in function (nothrow)
{    NW.trace("NW.hasABAP(", nothrow, ")");    if (_hasABAP == undefined && !nothrow)
{        ASSERT(arguments.callee, false, "NW(" + this.getSID() + ").hasABAP() is undefined");    }
NW.trace("NW.hasABAP() done: ", _hasABAP);    return _hasABAP;}NW(SAPID).hasABAP() is undefined
ERROR 2010-09-24 10:52:45
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2010-09-24 10:52:45
FCO-00011 The step setLoadType with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|
NW_getDBInfo|ind|ind|ind|ind|4|0|
NW_getLoadType|ind|ind|ind|ind|0|0|setLoadType was executed with status ERROR .
any body have solution
gagandeep

Hi,
Please make sure the hostname is not beginning with digit?
We found similar problem reported by other customers that the error occurs if hostname begginning with digit.
For details, please refer to note 611361.
If it is difficult for you to change hostname, please stop sapinst and modify the control.xml in your
installation directory:
search for the string pfdir.getChildNodes and repleace the
line
for (var it =
pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-z][a-zA-Z0-9-]*$/);
!it.isDone(); it.next()) {
with the line:
for (var it = pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-Z0-9-]*$/);
!it.isDone(); it.next()) {
It is not sufficient to just restart SAPinst in order to fix the problem.
You have to restart the installation from scratch with the modified control.xml.
You can restart the installer from DVD, choose the installation service
on the first screen, and when the next screen appears, interrupt the
installer. Then patch the control.xml in the installation directory and
restart the installer.
Best Regards
Julia

Error in system....

Similar Messages

Maybe you are looking for