Error in Tomcat log and localhost_log after BO XI2 SP3 install

Hi,
After installing SP3 on my server I am getting the following error message in the localhost_log.2008-09-17.txt.
Caused by: java.lang.IllegalStateException: Context path /businessobjects/enterprise115/desktoplaunch is already in use
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:896)
As well when I start Tomcat a severe error message apears.
I have replaced web.xml and struts-InfoView.xml with the original version.
Location:C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF
When I conncet to IfoView, it seems to work, except some activex buttons are "red Xed".
Thank you for your help,
Alex

Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.

Similar Messages

Promoto to OD Master - errors in slapconfig.log and slapd.log

After a lot of promoting to OD Master and demoting to Standalone I have finally a OD Master that seems like it's working.
At least I can bind my clients to it and then (after reboot of the client) work with networked home-dirs Smile.
BUT I have a couple of entries in my logs that I have not seen in the testserver (I had no problems with setting up a testserver as an OD Master on a test-LAN…)
1. /Library/Logs/slapconfig.log:
Creating the keytab file
kadmin: No entry for principal xgrid/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
kadmin: No entry for principal afpserver/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
Creating the keytab file
kadmin: No entry for principal ldap/[email protected] exists
in keytab WRFILE:/etc/krb5.keytab
2006-03-13 22:59:23 +0100 - kerberosautoconfig command output:
The machine is standalone
Removing /Library/Preferences/edu.mit.Kerberos
2006-03-13 22:59:23 +0100 - kerberosautoconfig command failed with status 255
2006-03-13 22:59:23 +0100 - command: /usr/sbin/mkpassdb -kerberize
2006-03-13 22:59:23 +0100 - mkpassdb command output:
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
2. /var/log/slapd.log:
Monday, March 13 2006 @ 05:09 pm CST
After a lot of promoting to OD Master and demoting to Standalone I have finally a OD Master that seems like it's working.
At least I can bind my clients to it and then (after reboot of the client) work with networked home-dirs Smile.
BUT I have a couple of entries in my logs that I have not seen in the testserver (I had no problems with setting up a testserver as an OD Master on a test-LAN…)
1. /Library/Logs/slapconfig.log:
Creating the keytab file
kadmin: No entry for principal xgrid/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
kadmin: No entry for principal afpserver/[email protected]
exists in keytab
WRFILE:/etc/krb5.keytab
Creating the keytab file
kadmin: No entry for principal ldap/[email protected] exists
in keytab WRFILE:/etc/krb5.keytab
2006-03-13 22:59:23 +0100 - kerberosautoconfig command output:
The machine is standalone
Removing /Library/Preferences/edu.mit.Kerberos
2006-03-13 22:59:23 +0100 - kerberosautoconfig command failed with status 255
2006-03-13 22:59:23 +0100 - command: /usr/sbin/mkpassdb -kerberize
2006-03-13 22:59:23 +0100 - mkpassdb command output:
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
kadmin.local: unable to get default realm
2. /var/log/slapd.log:
Mar 13 23:01:00 server slapd[389]: Entry
(uid=untitled_1,cn=users,dc=server,dc=my-domain-name,dc=net):
object class 'posixAccount' requires attribute 'homeDirectory'\n
Mar 13 23:01:00 server slapd[389]: entry failed schema check: object class 'posixAccount'
requires attribute 'homeDirectory'\n
Mar 13 23:01:33 server slapd[389]: Entry
(uid=t2,cn=users,dc=server,dc=my-domain-name,dc=net): object
class 'posixAccount' requires attribute 'homeDirectory'\n
Mar 13 23:01:33 server slapd[389]: entry failed schema check: object class 'posixAccount'
requires attribute 'homeDirectory'\n
PS.:
- Just to be on the safe side I have batch-replaced the domain name with "my-domain-name" & "MY-DOMAIN-NAME"
- Some linebreaks have been added to the logs above to make the whole post more readable!
Before I made the (almost?) successfull promotion to OD Master I did:
- Make sure reverse DNS is working
- Made the server's Network Preferences DNS server point to 127.0.0.1
- Set the hostname via "sudo scutil --set HostName"
- /etc/hostconfig contains "HOSTNAME=-AUTOMATIC-"
- The server is running DNS, AFP, Web, MySQL & Mail
- How serious are the errors I can see in the logs?
- How an I fix them?
TIA From a Kerberos newbie (that had a lot of help from the O'reilly book "Mac OS X Panther Administration")
PS.: This question is also asked on the very informative site AFP548 so far with no replies:
http://www.afp548.com/forum/viewtopic.php?forum=39&showtopic=11693
G5 dual 2.0 GHz, Mac SE and a lot more Mac OS X (10.4.5)

the message "kadmin.local: unable to get default realm" indicates that your
/Library/Preferences/edu.mit.Kerberos file is missing or incorrect.
Using workgroup manager look at the KerberosClient record (you may need to go into the preferences and set the "show all records" checkbox), look in the XMLPlist attribute for an xml representation of the edu.mit.Kerberos file.
as root on the OD Master, run klist -k to view keytabs (there should be 3 mostly identical entries for each service)
also as root on the OD Master, run kadmin.local -q "listprincs" to view the principals in the kdc.
Hope this gets you started
- Leland
DP G4 Mac OS X (10.4.2)

Errors in alert log and listener log and "alter database mount exclusive"

Hello!
I need a help.
Database 11R2 works under MS Windows Server.
Whwn I start it using Services, according alert log it is started by command "alter database mount exclusive".
Next - alter database open.
After this, it seams that program, which should put data into database, can not work with it, because I see errors in alert log: ora-12537, 12560, 12535, 12570, 12547.
What does itmean and what to do?
This is extract from alert_log
ORACLE_BASE from environment = C:\Oracle
Mon Feb 04 14:54:53 2013
alter database mount exclusive
Successful mount of redo thread 1, with mount id 1458539517
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Thread 1 opened at log sequence 3105
Current log# 3 seq# 3105 mem# 0: C:\ORACLE\ORADATA\xxx\REDO03.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
Mon Feb 04 14:55:04 2013
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Feb 04 14:55:06 2013
QMNC started with pid=20, OS id=2860
Completed: alter database open
Mon Feb 04 14:55:11 2013
Starting background process CJQ0
Mon Feb 04 14:55:11 2013
CJQ0 started with pid=25, OS id=2000
Mon Feb 04 14:55:11 2013
db_recovery_file_dest_size of 4977 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Feb 04 15:00:29 2013
Starting background process SMCO
Mon Feb 04 15:00:29 2013
SMCO started with pid=32, OS id=3212
Edited by: kogotok1 on Feb 4, 2013 4:54 PM

Thank you.
But in the same time - when I see in alert log those error messages ora -12560, 12537,12535,12570 and so on - clients programs, whiie try to connect, hang up.
For sql plus takes 20 minutes to connect.
lsnrctl status gives the following
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 04-FEB-2013 16:01
:46
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx-BD.mosxxx
.elektra.net)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 01-FEB-2013 10:22:48
Uptime 3 days 5 hr. 39 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\xxx-BD\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx-BD.mosxxx.elektra.net)
(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 2 instance(s).
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Instance "xxx", status READY, has 1 handler(s) for this service...
Service "XXXDB" has 1 instance(s).
Instance "xxx", status READY, has 1 handler(s) for this service...
The command completed successfully
To tell the truth I am confuse - I thought I have only 1 service "XXXDB" and 1 instance - "xxx".
May be I have wrong entries in tnslsnr.ora?

Unknown Error when I Logging and Transfer P2 Card files in FCP 6.0.6

I have been trying for the past two week to Log and Transfer P2 files to my external hardrive using FCP 6.0.6 unsuccessfully.
Originally I tried to Log and Transfer directly from the Panasonic HPX-170 in between my shooting. The first time it was a success but from then on I always get the same Unknown Error when attempting to transfer. When I encountered the Unknown Error during the second transfer I went on to create folders with the P2 contents on my external Hard Drive.
When I drag any of the P2 folder content on the Log and Transfer window I can see all the clips. I can successfully transfer small B-roll clips I have but any big size file (all my interviews) return an Unknown Error symbol at the end of the transfer. I believe this is probably why I didn't encounter any issues during my first time.
I tried deleting the preferences in FCP and then Logging and Transfer and it works if the systems settings are set for the Mac Pro but not for the external HD. The problem is I don't have enough space on my Mac. I have cleared 45GB of space but my P2 files total 54GB. I tried the same process with a Mac Power Book with FCP 5.1.4 and again in encounter the same problem.
The external HD is a 1TB Western Digital that I have used before with FCP for editing but never before with P2 files. Its in good working order and has 79GB free space remaining. Both the camera and the P2 cards (16GB and 4GB) are also performing as expected.
I would appreciate any suggestions.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

Using AIA for Error Handling. Logging and Notification Services

hi,
In our project we usie OSB and BPEL for integrating different applications.
There is a suggestion that we should use AIA to just use the Error Handling, Logging and Notification services from AIA. I am not sure about this use case, as most of these services mentioned can be replicated in BPEL. Except for the AIAAsyncExceptionHandling BPEL process, i guess all other functionalties provided by AIA can be easily developed in BPEL or OSB alone.
However, would like to hear from you guys about this particular use case. Is it advisable?

Hi,
It's an issue with 10.1.3.4 OBIEE. (whem using IBM LDAP)
References
BUG:7363517 - INTERNAL BI FAILURE ON STARTUP
They issue can be resolved by setting LD_PRELOAD=/path/libibmldap.so
Here are the steps:
. sa-init.sh
export LD_PRELOAD=/path/libibmldap.so

Essbase Errors in the log and applications crashing - 11.1.2.0 and 11.1.2.1

We recently started installing a new DEV, CERT and Prod environment. We installed 11.1.2.0 in Dev and then 11.1.2.1 in Cert and Prod. In all three environments we are getting error messages in our essbase logs...“Essbase Error 1042017 - Increase the NetRetryCount and/or NetDelay” We have done all the usual changes to the config file by changing the netretrycount and netdelay settings, however the problem still persists. We are only working with developed applications in Dev, and there it causes those applications to stop. In Cert and Prod, only the sample apps are loaded, but again we get these errors in our logs. Since it spans multiple environments it seems that this is some thing with our environment, but not sure what that would be. Any thoughts?

Questions regarding version compabilities come up quite often, yet the answer is still the same: have a look at the certification matrix http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls
for installation instructions on your chosen platform have a look at the installation manual: http://docs.oracle.com/cd/E24269_01/doc.11120/e23960/toc.htm
What do you plan to do with SOA suite? This isn't needed for forms&reports.
cheers

Uknown Error with AVCHD Log and Transfer

Hi All,
I have a Lumix GH1, and have been logging and transferring video perfectly through FCP up until this point. Recently, I filmed a live concert in full HD, and shot one long, hour and 15 minute take. When I tried to import the file via log and transfer, I'm encountering a little red stop sign with an exclamation point in the que which reads "Error: Unknown". I have pointed FCP to the "Private" file and it comes up fine as a thumbnail.
My concern is that the file is corrupt. However, the clip is also playing fine in the preview, which keeps me thinking something is salvageable. I also thought it might have something to do with the 2GB limit, so I tried importing a small section with the same result. Basically, I'm having no luck and my contract is getting upset with the time delay.
Anyone have any clue how to proceed?
Any help would be hugely appreciated.

freeform23, I can only hazard a guess but try some of these (these are NOT steps just suggestions):
1. Copy the video file to another location and try re-importing from there?
2. Import using another CODEC
3. Copy file onto DeskTop and FIRST play it in QT Player, then try Import!
Sorry I couldnt have been of any more help.

Firefox has becomes unresponsive and slow after I tried to install addons (not installed)?

I recently format my computer and reinstall the windows 7, since this was the only solution that I know to fix the problem with Firefox (I previously had this problem too). I download the latest version of firefox 33.0.2 and install it . This version was super fast. But becomes unresponsive and slow, when I tried to install the add-ons. I visited the official website of firefox and search for the addons, when I tried to install some addons, Firefox crashed. From then on, it has becomes quite slow and can't restore previous sessions. Even to type my email address, It takes more than 5 minutes and becomes unresponsive frequently (after I typed each letter).
I want to know whether this is due to some viruses, or this version of firefox is not "stable"

Hey there,
We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
After you've done this, you could try '''Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Hope this helps!
Curtis Parfitt-Ford
Mozilla Support

Bonjour printing error in console.log and cups error_log

Hi everyone,
I have a client who has been successfully printing to an HP LaserJet 4000 over his home LAN for some time now. However, this evening he was no longer able to print, with the print queue stopping immediately when he would try.
iMac (Intel) Core Duo, Mac OS X 10.4.8, connected through a D-Link DI-524 wired/wireless router. There is a D-Link DP300U print server connected to one of the LAN ports on the router, to facilitate printing to a printer that has not been connected to the LAN recently.
After using Printer Setup Utility to reset everything, repair permissions, etc., the system still would not print. No updates have been installed since the last week of January 2007, and printing has been fine since then.
The only clue I was originally able to come across was found in console.log:
~ ~ ~ ~ ~
No log handling enabled - turning on stderr logging
snmpInk: Unknown host (SMB-Maui\0321.local.)
~ ~ ~ ~ ~
Then, I looked under /var/log, under the cups disclosure triangle, at error_log:
E [14/Feb/2007:20:50:44 -0800] [Job 2] Unable to locate printer 'SMB-Maui\0321.local.' - Unknown host
E [14/Feb/2007:20:50:44 -0800] PID 282 stopped with status 1!
~ ~ ~ ~ ~
There is only the one Mac on the LAN, which is not named "SMB-Maui"-anything. I was able to get printing to function via AppleTalk once it was enabled, but the client has been printing successfully via Bonjour for some time and so there seemed no reason why this should simply "happen". No new software has been installed, as he's really quite good about leaving the system alone to do its thing.
Disk Utility repaired multiple print-related permissions errors before I began using Printer Setup Repair.
I'm looking for troubleshooting steps to take beyond this point. While the client is satisfied that he can now print via AppleTalk, I am not and would very much like to resolve the lower-level problem. Please advise?
Thanks much for your time,
MBJ

Hi Phil,
Thanks much! I think you might be on the right track, as I got some unexpected results from Bonjour Browser.
First of all, there's no Internet Printing Protocol (IPP) entry at all—in fact, several others I have present on my own, local system are not to be found on the remote iMac. What the iMac does show is the following:
local - 3
Apple Remote Desktop (net-assistant.udp.) - 1
iMac
(IP address):3283
[(IPv6 MAC address)]:3283
Remote Frame Buffer (rfb.tcp.) - 1
iMac
(IP address):5900
[(IPv6 MAC address)]:5900
Workgroup Manager (workstation.tcp.) - 1
iMac [MAC address]
[(IPv6 MAC address)]:9
(IP address):9
I have reapplied the 10.4.8 Combo Update, with no effect to the problem itself, nor to what is showing in Bonjour Browser.
One other possible clue: A visitor on the home LAN did attempt to print from Virtual PC 7 on a portable they had brought with them. They were unable to do so from Windows XP, but could print properly from Mac OS X. There is no known, causal relation to the problem at hand here - I mention it to be thorough, no more or less.
I'll standby for your further thoughts!
Thanks much for the assist,
MBJ
Hi Mike,
Bonjour is a service discovery system. It doesn't
print. For
that you use ipp or lpr, etc. The reason why
Appletalk works
is that it has its own discovery system. It's older
and
apparently more reliable. Bonjour uses muticast ip
but
unless muticast requests are forwarded can't get
outside
a local subnet.
Once on your net was a machine - probably a samba
server -
named "maul". Must have been, it's in a mib
somewhere. Oh
wait - maybe it's cached in the dlink from its old
days on
the dark side!
Judging from the direction of the slash it was a
Windows
machine (I don't think that's an octal 321). CUPS
thinks
that's where the printer is. Normally cups discovers
the
printers via bonjour, and bonjour must be coming
back
with the wrong info!
But bonjour isn't that smart, something must be
tricking it.
There's a wonderful free utility called "Bonjour
Browser"
which will show you which services are being
announced.
Give it a try:
http://www.versiontracker.com/dyn/moreinfo/macosx/2162
2
Let me know what it shows under ipp.
-Phil
Powerbook G4, iMac
(Intel), and tons of hardware sitting in the closet
Mac OS X (10.4.8)
Power Mac G4 (QuickSilver 2002), 20" Cinema Display (ADC) Mac OS X (10.4.8) Dual 1.0 GHz G4/1.5 GB RAM/2x160 GB HD/SuperDrive/GeForce4 Ti/PCI USB 2.0&FW400

Java.sql.SQLException errors in Tomcat log

When bringing up a RoboHelp 8 help page using a URL like this:
http://server:port/configuration/server?project=ProjectName&context=mapid
an error is logged to my Tomcat localhost.date.log file. The help page displays fine with no errors, but I'd rather not have the log files filling up with errors every time help is invoked. Any idea what is causing these and how to avoid? Is opening a browser window with a url the best way to invoke context sensitive help from a web app?
Feb 24, 2010 1:46:09 PM org.apache.catalina.core.ApplicationContext log
SEVERE: java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]String or binary data would be truncated.
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]String or binary data would be truncated.
    at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
    at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(Unknown Source)
    at adobe.robohelp.server.DatabaseManager.ExecuteUpdateNoCommit(DatabaseManager.java:237)
    at adobe.robohelp.server.DatabaseManager.GetNewUserId(DatabaseManager.java:447)
    at adobe.robohelp.server.CSystemManager.CreateCookies(CSystemManager.java:531)
    at adobe.robohelp.server.CSystemManager.doCommand(CSystemManager.java:207)
    at adobe.robohelp.server.HelpArea.doGet(HelpArea.java:62)
    at adobe.robohelp.server.AreaManager.doGet(AreaManager.java:79)
    at adobe.robohelp.server.RoboHelpServer.doGet(RoboHelpServer.java:149)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:433)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:583)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
    at java.lang.Thread.run(Unknown Source)

I did a couple of things like fix the type that was being passed etc., and I get this exception now
java.sql.SQLException: ORA-06550: line 1, column 28:
PLS-00103: Encountered the symbol "COMPUTER" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem =>
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec as between from using || multiset member
submultiset
The symbol ". was inserted before "COMPUTER" to continue.
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:837)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:523)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:204)
     at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1006)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1315)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3576)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3677)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4714)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
     at dao.CallableStatementDAO.callProcedure(CallableStatementDAO.java:69)
     at integration.IntegrationService.main(IntegrationService.java:192)

Run time Error DBIF_RSQL_SQL_ERROR while logging and executing some tcodes

Hi all,
Hi all,
When i try to login into my system (ECC 6.0 with Oracle DB), i have been directed to dump -->
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Missing RAISING Clause in Interface
Program SAPFSDS1
Include FSDS1E01
Row 365
Module type (FORM)
Module Name TRANSFORM_NEW_OLD
Trigger Location of Exception
Program SAPFSDS1
Include FSDS1E01
Row 380
Module type (FORM)
Module Name TRANSFORM_NEW_OLD
In the source code the the cause for the error is shown in the below line"
SELECT SINGLE * FROM TDCLD
WHERE DOKCLASS EQ DOKCLASS.
"How to correct the error"
Database error text........: "ORA-32255: Message 32255 not found;
product=RDBMS; facility=ORA#"
Internal call code.........: "RSQL/READ/TDCLD "
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be abl
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the follo
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPFSDS1" or "FSDS1E01"
"TRANSFORM_NEW_OLD"
When i tried to look for the error ORA-32255, i am unable to get any information regarding this?
Could you please suggest me..
I have made the following changes trying to solve the error:
shared_pool_size = 401832601 and
i have executed sql command --> alter system set "_object_statistics"=false scope=spfile;
Message from Alert Log file:
Incremental checkpoint up to RBA [0x1076.10c61.0], current log tail at RBA [0x1076.10e4d.0]
Message from dev_w0 file:
OCI-call failed with -1=OCI_ERROR
C SQL error 32255: 'ORA-32255: Message 32255 not found; product=RDBMS; facility=ORA
C '
C *** ERROR => Error 32255 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12720]
C *** ERROR => ORA-32255 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12739]
C sc_p&H05B11F10,no&H110,idc_p&H00000000,con=0,act=1,sle n&H103,smax&H256,#vars=2,stmt
8718D8,table=ATAB
C SELECT "TABNAME" , "VARKEY" , "DATALN" , "VARDATA" FROM "ATAB" WHERE "TABNAME" = :A0 AND "VARKEY" = \
C :A1;
C sc_p&H05B11F10,no&H110,idc_p&H00000000,con=0,act=1,sle n&H103,smax&H256,#vars=2,stmt
8718D8,table=ATAB
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p &H00000000,ocistmth_p
872784
C IN : cols=2,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rs ize&H28,vmax&H32,bound=1,iobuf_p&H05BF4F28,vda_p
873CA8
C lobs=0,lmax=0,lpcnt=0,larr&H00000000,lcurr_p&H0000000 0,rret=0
C OUT: cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rs ize&H124,vmax&H32,bound=1,iobuf_p&H05BEBAF8,vda_p
874118
C lobs=0,lmax=0,lpcnt=0,larr&H00000000,lcurr_p&H0000000 0,rret=0
C SELECT "TABNAME" , "VARKEY" , "DATALN" , "VARDATA" FROM "ATAB" WHERE "TABNAME" = :A0 AND "VARKEY" = \
C :A1;
B ***LOG BY4=> sql error 32255 performing SEL on table ATAB [dbtran#11 @ 7512] [dbtran 7512 ]
B ***LOG BY0=> ORA-32255: Message 32255 not found; product=RDBMS; facility=ORA
[dbtran#11 @ 7512] [dbtran 7512 ]
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B RSLT: {dbsl=99, tran=1}
B FHDR: {tab='ATAB', fcode&H17, mode=2, bpb=0, dbcnt=0, crsr=0,
B hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
B init:p&H00000000, init:#=0, wa:p=0X031902F0, wa:#&H15000}
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B STMT:
B CRSR: {tab='', id=0, hold=0, prop=0x80000, max.in@0=1, fae:blk=0,
B con:id=0, con:vndr=5, val=2,
B key:#=2, xfer=0, xin:#=1, row:#=0, upto=1, wa:p=0X031902F0}
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sun Apr 05 22:38:04 2009
A
A ABAP Program SAPFSDS1 .
A Source FSDS1E01 Line 380.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#9 $ SAP.
A Function HandleRsqlErrors Line 778.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
A
I have started the local client copy and have stopped it in the middle. i have logged off and tried to login again, this is the start of the dump.
I am unable to resolve it. PLEASE give a solution
Thanks & Regards,
Subbu.

Hi Subbu,
We were in touch when you previously posted this, but somehow I got an error when I tried to access the thread. I remember that your DB was still 10.2.0.1 and that this may have caused a corruption. The only explanation for ORA-32255 that looks remotely interesting is that it may occur with the OCI (Oracle Call Interface) accessing a NULL LOB (and ATAB does contain a LOB field). Do you have any chance of upgrading the database where you have the problem to 10.2.0.4?
I don't know whether we'll learn anything useful from this (you might just get an ORA-32255 again) but could you execute the following statement in SQLPLUS:
select count(*) from <sapuser>.ATAB where VARDATA IS NULL;
(replace <sapuser> with the name of the SAP schema owner)
Regards,
Mark

Getting error in ASA logs from CSM - after adding device to inventory

I've supplied the correct credentials for the ASA in the inventory section of the CSM. I get a success but, I also get a failure. The failure in the logs does not show a username is only shows "" and the protocol as https
Any ideas on why this happening, or suggestions?

I've supplied the correct credentials for the ASA in the inventory section of the CSM. I get a success but, I also get a failure. The failure in the logs does not show a username is only shows "" and the protocol as https
Any ideas on why this happening, or suggestions?

Log processing missing after 10.1.3 install.

After I installed 10.1.3 my "log processing" was missing. Another computer had retained it after the upgrade. What can I do now?

Hi.
To enable JSSO and configure applications to be part of SSO:
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28957/javasso.htm#BABGJCFD
In addition, to configure WSM to be part of SSO, also need to do this:
1 - Open the ORACLE_HOME/owsm/bin/install.properties file, and verify that the following parameter is set:
install.sso.support=true
2 - Go to ORACLE_HOME/owsm/bin and run the wsmadmin deploy command:
wsmadmin deploy control
Regards.
Denis

Remote Exchange Management Console "W3SVC isn't running on any Exhange servers in site" and always shows older version after SP2 or SP3 installed

I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers.
First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem, but no clear fix other than deleting the registry entry (HKLM\SOFTWARE\Microsoft\ExchangeServer) and the
"C:\Program Files\Microsoft\Exchange Server" folder. I'm guessing this is a bug since there should not be any Exchange services that need to be stopped on a computer where I'm just trying to use the EMC tool to manage Exchange.
Next, is where when I open EMC I get "The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote PowerShell, this service must be running. Make sure that the W3SVC is running on
at least one Exchange server." From all the reading I am pretty sure that this is due to the Exchange servers being on one version and EMC I'm trying to use is another version.
This is the version our Exchange Servers are on:
ProductVersion   FileVersion      FileName
14.02.0375.000   14.02.0375.000   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
Which finally brings me to the part where no matter what SP I install to run EMC it always shows:
ProductVersion   FileVersion      FileName
14.01.0218.015   14.01.0218.015   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
I've tried SP2, and even SP3 hopeing that an even newer version would let me connect to Exchange, but no matter what it always shows the 14.01 version above.
I've also tried installing "Exchange2010-KB2874216-x64-en" which should be the same version we are on (Update Rollup 7 for Exchange Server 2010 Service Pack 2), but get a Windows Installer Error stating, "The upgrade patch cannot be installed
by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." This Error probably makes sense if no matter what I do I'm stuck with a version prior to SP2.
Any ideas?

Hi,
From your description, I would like to clarify the following things:
1. Make sure the World Wide Web Publishing Service is running in Exchange server.
2. Ensure that the account you use to open EMC is a member of Organization Management role group.
3. Based on my knowledge, the error "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." occurs if you install
the RU for a different SP. Please re-download the Service Pack 2 and install it on the remote computer since it hasn't been installed successfully from the above information.
What's more, here is a similar thread for your reference.
Unable to install Update Rollup 4 for Exchange Server 2010 Service Pack 2
https://social.technet.microsoft.com/Forums/exchange/en-US/677c21ed-e125-41c1-a468-c268e1f21f8e/unable-to-install-update-rollup-4-for-exchange-server-2010-service-pack-2?forum=exchange2010
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Error in building HotSpot and how to confirm HotSpot is installed?

I have downloaded the source code of the Java HotSpot 2.0 and would like to build my own VM. I have followed the build instructions in the README file,but the build was unsuccessful.
(1) I use(Bash shell): make product to build the server HotSpot. and return the following error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
make[2]: *** [carRememberedSet.o] Error 1
make[2]: Leaving directory `/usr/local/hotspot/hotspot2_0-server-src-linux/build/linux/linux_i486_compiler2/product'
make[1]: *** [the_vm] Error 2
make[1]: Leaving directory `/usr/local/hotspot/hotspot2_0-server-src-linux/build/linux/linux_i486_compiler2/product'
make: *** [product] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Why is this happening n how can I solve it?
(2) Besides, how can I confirm that the successful built HotSpot is running on the jdk installed? Any specific command to know this?
Thanx: meileng

Can any one help me to solve the problem of building the HotSpot2_0_server-src-linux ?
I am using RedHat 9.0 with default GNU gcc/g++ version 3.2.2, GNU Make version 3.79.1 and kernel 2.4.20-8smp.
Following the step:
1) setenv ALT_BOOTDIR /usr/local/jdk1.4.2
2) unsetenv CLASSPATH
3) unsetenv LD_LIBRARY_PATH
5)cd build/linux
4) gmake product (build server hotspot)
I receive the same error
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Compiling
/hotspot2_0-server-src-linux/build/linux/../../src/share/vm/memory/carRe
memberedSet.cpp
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:
In
member function `void
CarRememberedSet::scavenge_higher_train_recorded_stores()':
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:11
6:
invalid
conversion from `oopDesc**' to `int'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:11
6:
invalid
conversion from `oopDesc**' to `int'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:11
6:
invalid
conversion from `int' to `oopDesc**'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:
In
member function `void
CarRememberedSet::scavenge_same_train_recorded_stores()':
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:14
0:
invalid
conversion from `oopDesc**' to `int'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:14
0:
invalid
conversion from `oopDesc**' to `int'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:14
0:
invalid
conversion from `int' to `oopDesc**'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:
In
member function `void
CarRememberedSet::scavenge_special_nonoop_recorded_stores(long int,
long
int)':
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:18
9:
invalid
conversion from `oopDesc**' to `int'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:18
9:
invalid
conversion from `oopDesc**' to `int'
/hotspot2_0-server-src-linux/src/share/vm/memory/carRememberedSet.cpp:18
9:
invalid
conversion from `int' to `oopDesc**'
gmake[2]: *** [carRememberedSet.o] Error 1
gmake[2]: Leaving directory
`/hotspot2_0-server-src-linux/build/linux/linux_i486_compiler2/product'
gmake[1]: *** [the_vm] Error 2
gmake[1]: Leaving directory
`/hotspot2_0-server-src-linux/build/linux/linux_i486_compiler2/product'
gmake: *** [product] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Has anyone compile build a hotspot before. If so, I am really desperate to seek your advice.
Thank you: meileng

Error in Tomcat log and localhost_log after BO XI2 SP3 install

Similar Messages

Maybe you are looking for