Error saying cost center/EAT007 validity exists only for 2009

I am trying to upload the HR details from Non SAP to SAP for 2010, using an interface from T.code se38, I am getting an error saying
"Master record for cost center(number)/ EAT007 exists only for 2009".
When I see the cost center validity in KS02, its validity is from 01.01.2009 to 12.31.9999.
Could anybody answer this.

Hi Abhishek,
I am trying to upload the time sheets of the employees from other software to SAP using the Tcode SE38,
Later from HR to Co we are using CATs (Cat2 and CAT7) to transfer the data. Time time sheet contais the details of the sales order against which they have spent time, their time consumption for providing services and also the activity type they have performed.
In SE38, while I am trying to upload the data it shows an error saying "Master record for cost center/EAT007 exist only for 2009".I am trying to upload the data for 2010 Jan to Aug.
When checked, the Cost center's validity in our system is from 01.01.2009 to 12.31.9999.
Please assist.

Similar Messages

Error KI222 - Cost Center Not Valid for Date

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

are you sure that the posting and document dates you submit with the BAPI are correct?

KP90 error - KI222 - Cost Center does not exist.

Hi gurus,
While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
Please suggest any solutions....
1) Can I change the message class for KI222
2) Can I change the from date of cost center.
Please suggest as this in an High priority!!!!!!!!!!!!!
Regards,
Devang

Hi Devang,
As you can see, cost center was created some days after the date that the error message is showing.
You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
Best Regards,
Vanessa.

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Message Cost Center doesn't exist

Hello,
When I look into the AFBP I see that there was one Run with an error. It says that the cost center doesn't exist at 31.05.2014. Message number: KI222
The cost center exists and is also valid. It also says that the cost accounting circle KORE has been automatically determined from the accounting area.
What coult be the problem? I'm not very good at solving problems at the sector accountancy 'cause I wasn't trained that until now.
lg Carmen

Hi Carmen.
Please check the OSS Notes Below.
16653 - How is the validity of the cost center checked?
1925028 - KI222 when creating assets from posting transaction
Kind Regards.
Jandoval Nascimento

Error in Cost center

Dear All
I have made a cost center 101 in company code 1000 which was valid from 01.04.2006 to 31.12.9999.
Now the management wants that cost center to be under company code 2000 from 01.01.2010 to 31.12.9999.
Using KS04, I deleted that cost center from validity period 01.01.2010 to 31.12.9999.
Now when I create that same cost center 101 in company code 2000 with validity period 01.01.2010 to 31.12.999 i get the following error:
No fiscal year defined for the analysis period
Message no. KS370
Diagnosis
You have not maintained any fiscal years for the analysis period 01.04.2008 to 31.12.9999 in the current fiscal year variant V3.
To execute consistency checks, the system requires information regarding the fiscal years. Certain fields must be unique for each fiscal year.
System Response
The system issues a warning, which you can ignore by choosing "ENTER".
ACHTUNG:
If you later maintain fiscal years for the affected time period, no consistency checks are made by the system. You should only skip the warning if the time periods involved are far in the future.
Procedure
Ignore the warning to confirm the intended entries.
Choose Cancel if the planned entries are likely to lead to inconsistencies.
If required, first maintain the fiscal year variant for the affected time period.
When I press enter and ignore that warning message I get the following message:
No further processing (contact your system administrator)
Message no. KS022
Diagnosis
To ensure the consistency of your entries, check that they are unique for the fiscal year and whether it is impossible to change them because of existing totals records. For both these checks you must determine the fiscal year limits of the period. These are defined in the fiscal year variant assigned to the controlling area. In this case the fiscal year variant was not defined in FI configuration for all the fiscal years within the processing period. This means the SAP System cannot determine the fiscal year limits.
System Response
Processing is terminated.
Procedure
Define the fiscal year variant assigned to your controlling area fully for all the fiscal years within the analysis period with the function "Maintain FI configuration".
Please advice.
Thanks & Regards
Kanwaljit

Dear Eli
I changed the validity period. But then I am facing a problem. I am reproducing it below:
Dear All
I have made a cost center 101 in company code 1000 which was valid from 01.04.2006 to 31.12.9999.
Now the management wants that cost center to be under company code 2000 from 01.01.2010 to 31.12.9999.
Using KS04, I deleted that cost center from validity period 01.01.2010 to 31.12.9999.
Now when I create that same cost center 101 in company code 2000 with validity period 01.01.2010 to 31.12.999 i get the following error:
No fiscal year defined for the analysis period
Message no. KS370
Diagnosis
You have not maintained any fiscal years for the analysis period 01.04.2008 to 31.12.9999 in the current fiscal year variant V3.
To execute consistency checks, the system requires information regarding the fiscal years. Certain fields must be unique for each fiscal year.
System Response
The system issues a warning, which you can ignore by choosing "ENTER".
ACHTUNG:
If you later maintain fiscal years for the affected time period, no consistency checks are made by the system. You should only skip the warning if the time periods involved are far in the future.
Procedure
Ignore the warning to confirm the intended entries.
Choose Cancel if the planned entries are likely to lead to inconsistencies.
If required, first maintain the fiscal year variant for the affected time period.
When I press enter and ignore that warning message I get the following message:
No further processing (contact your system administrator)
Message no. KS022
Diagnosis
To ensure the consistency of your entries, check that they are unique for the fiscal year and whether it is impossible to change them because of existing totals records. For both these checks you must determine the fiscal year limits of the period. These are defined in the fiscal year variant assigned to the controlling area. In this case the fiscal year variant was not defined in FI configuration for all the fiscal years within the processing period. This means the SAP System cannot determine the fiscal year limits.
System Response
Processing is terminated.
Procedure
Define the fiscal year variant assigned to your controlling area fully for all the fiscal years within the analysis period with the function "Maintain FI configuration".
Please advice.
Thanks & Regards
Kanwaljit

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Error In Cost Center Hierarchy Creation

Hi Guru's
Error In Cost Center Hierarchy Creation
Our Business scenario is we have controlling area 1000, under that we have cost center Group as ABC lower level to that we create each business wise in lower level like 1100, 1200, 1300 under this we create 110010 for production 110020 employee 110030 dummy so on, by mistake the client has created 1400 below level to 1000 now all cost center amount is booked in this is reflecting in 1400 and as well in ABC now I need to move all 1400 cost centers below ABC please let me know how to go about this.
Regards,
Bhaskar

Hi,
So, if it's standard hierarchy go to OKEON and just drag-and-drop this group under ABC; simple as that. In KSH2 (if it's 'alternative' group) the technology of moving is different, but still quite obvious: select the group you want to move and select the new placement.
Regards,
Eli

Error regarding cost center while posting migo

Dear sap experts
I am getting this error message
COST CENTER A123/A123 IS BLOCKED AGAINST REVENUE POSTINGS ON 29/12/2010
where A123 is cost center as well as controlling area.
I have some more doubts
WHETHER PROFIT CENTER SHOULD BE CREATED FOR THIS.
TO CREATE PROFIT CENTER PROFIT CENTER GROUP SHOULD BE CREATED BUT I AM GETTING ERROR
WHILE CREATING PROFIT CENTER GROUP. HOW TO SOLVE THIS
THANKS IN ADVANCE

hi
I followed your reply but now I am getting this error
COMPLETE PA TRANSFER STRUCTURE FI
How to overcome this.... any idea
waiting for the reply
bye

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.

After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.”

Please put a cost object with valid JV data for GL accoutnt (line 001)

Dear All,
When the user is trying to post ASKBN, They are getting an error saying "Please put a cost object with valid JV data for GL accoutnt (line 001)"
So we tried to look up the error, and the WBS, Cost center, profit center and JVA details are all available in place. Still cant understand why this error comes. And why the system is asking to put JV details when they are available.
On checking, WBS has an AUC and AUC has the cost center which has the JV details and PC details. So I think everything is in place.
Can someone help please and let us know if we are missing anything else that needs to be checked ?
Thanks,
Hari Dharen

Dear Hari Dharen,
if something else in missung you'll get a error message if you run ASKBN in testmodus.
regards Bernhard
Edited by: Bernhard Kirchner on Oct 5, 2010 8:55 AM

How to make the cost center or WBS field optional for Vendor/customer line?

Dear experts:
Does anyone has the experience of releasing WBS or cost center fields to be optional for the customer or vendor line item?
I've tested in system, neither the field status control in GL account master data nor the FSG in posting key worked, I can't let the WBS field to display in the screen and ready for input.
So my conclusion is that the FSG control in not completely effective for customer/vendor line, it there any other method to let WBS to be optional in custer/vendor line items?
Our purpose for changing that is that we're using joint venture accounting, we need to let users to input a cost object for system to derive joint venture information. please do not suggest deriving JV information using other methods, because we're dealing with a special case, i.g. in a cross-company document, only a customer/vendor line in our company, so it's impossible to split JV information from offset lines, anyway, please help me out directly with my issue.

Hi, Lu:
If I understand your question correctly, you want to modify the FSG of recociliation account of Vendor/Customer to make sure Cost Center/WBS field display in transaction F-22/F-43 for example, right?
I am not sure whether it is possible, I also tried in ECC6.0 but failed to show these two fields. And I think that doesn't make sense to assign CO object to AP/AR reconciliation account, but assign it to Revenue/Expense account in following line items.
And You can use New General Ledger functionality Document Splitting to derive corresponding CO object information to Reconciliation Account line item, but it is enabled only in General Ledger level, not in subledger level.
If you find any other meaningful solution, please also share with us.
Thanks & BR, Lawrence

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

Error saying cost center/EAT007 validity exists only for 2009

Similar Messages

Maybe you are looking for