Error message in executing query

Hi
There is one query which was working fine initially but sudeenly after making some changes it is giving the error message
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
I tried RSRT but it still does not help, giving the same message.
Please advise is there any other way to get this query working again.
Thanks in advance.
Regards,
Kate.

Hi Bahnu,
Thanks for your reply. I am able to access the query definition in the Bex analyser and I am able to execute it till the selection screen but after that it gives me the message:
System error in program CL_RSDM_READ_MASTER_DATA and form
sidvaldirect_read2
Message no. BRAIN299
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
I think the problem happened when someone else was trying to edit the query from Bex Designer when I was trying to
edit in the Bex Analyser.
Can you suggest what can be done to resolve it.
Even I tried creating a copy and executing it but both give the same error.
Many Thanks.
Kind Regards,
KAte.

Similar Messages

Error message after executing KKRC- How to define Hierarchy ID ?

Hi Gurus
Ours is a Chemical Mfg./ Marketing Company. We have ECC 5.0 version implemented in our Company. We have the Production process orders of different types ( Normal Process order , Reprocess Process order etc.). For the purpose of MIS it is our regular practice to download data in Worksheets & then work upon it ( pivot tables etc.) & compile the reports. We have the requirement to have SKU wise ( Finished Goodswise ) summarised compilation of different type of Variances ( both Qty. , value of input materials, wherever applicable) .
While browsing the SAPs BPX community database I have come across the query similar to my requirement . refer thread Product costing - Information system, order summarization
Posted: Sep 30, 2007 3:21 AM
As suggested in the response to that query I have followed the steps .
KKRV followed by KKRC . The error message after executing KKRC reads
No IDs defined for Hierarchy type CO
Diagnosis No Hierarchy id is defined in customising for the hierarchy type you selected
Procedure : go in to the customising and define the structure of hierarchy by means of an appropriate Hierarchy ID.
Can some one give me further leads ( i.e. navigation/path and clues for defining Hierarchy ID)
Or
is there any other way to address the requirement mentioned in opening para.
With best regards
Sudheer

Hi Patrick,
unfortunately I cannot provide an ad-hoc solution for your nested exception without further investigations.
Nevertheless I'm very interested to know, why you "gave up" using the Adaptive WS Model in Web Dynpro. What's the problem?
Perhaps the coding which now requires to create a model instance:
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit() {
//@@begin wdDoInit()
// create a new model instance (1)
EmailAdWSModel model = new EmailAdWSModel();
// create model objects (2, 3)
Request_SendEmail requestMO = new Request_SendEmail(model);
SendEmail emailMO = new SendEmail(model);
// associate model objects (4)
requestMO.setSendEmail(emailMO);
// bind executable model object to context node (5)
wdContext.nodeRequest_SendEmail().bind(requestMO);
//@@end
Regards, Bertram

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Error in while Executing Query in the Query Designer

Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

Error message when executing a report through a VB application

Hello,
I have a problem when I want to launch a Crystal Report 10 report in a Visual Basic application.
I created a report using "Add a command" to add a SQL query to this report, the report is working well when I launch it in Crystal Report. But when I launch it in the application I get an error message "The table 'Command' could not be found".
(Other reports are working in VB when I create a report whitout the sql command tool)
How can I do to make this working through VB ?
This application uses a sql server 2005 database.
Thank's in advance for your help,
Régis

Thank's for your answer, yes I'm connecting through an ODBC connection, yes the VB app is running the same odbc entry.
When I have only a "normal" link to a table the report is working well, the problem is that when I add a sql command in this report, the VB application thinks it's a "normal" sql table and it gives me the error message. The VB application didn't recognize that the table command in the report is a sql request. I don't know what's the difference between executing this report directly in CR or in the VB application, the report didn't react in the same way even if the ODBC entry is the same.
I don't know if what I try to do is possible, is it possible to execute a CR report with a sql command in a VB application ?
FI : I found yesterday the way to create the same report without a sql command, its working in the VB app. But it would be great if I could solve this problem because it's much more easier to create a report giving only the sql request and not to do that manually in the report (attaching all the tables, making the group by, sort...).

Getting error when we execute query in RSRT1

Hi Gurus,
I Loaded Transaction data in "0CCA_C11" cube and also loaded master data too.
but when i execute query in RSRT1 i am getting error message
1) Could not enter feature 0COSTCENTER__0PROFIT_CTR with SID 133 into table /BI0/SIOBJNM
2)System error in program CL_RSR and form GET_CHANMID-02- (see long text)
3)Error when generating dataProvider.
For 0COSTCENTER i loaded master data but for '0PROFIT_CTR' i am unable to load Hierarchy data because still the request is yellow even showing 58 from 58 records.
can any once can help me to soleve this issue.
Thanks in advance.
Raju.k
*points to be assigned.

Raju,
Try replicating your hierarchy DS and reload data.
hope it helps,
balaji

Error message while executing a SWF File

Hi All,
Iam trying to execute a SWF file which has its actionscript
written in AS3. When i execute this, I am getting an error message
which is as follows
Verify Error 1030# Stack Depth unbalanced 1 != 0.
Can anyone tell me what could be the root cause?
Thanks in advance,
Prabakaran Srinivasan.

Hi All,
I am able to find the root cause for this. For AS 3 classes,
while parsing the ABC code, every method body will be a set of
instructions in which each instruction will have an offset to it.
This offset will be useful to mark the target for branching
instructions like if, while etc.... Because, these instructions
contains targetoffset as a parameter to which the instruction has
to jump when the condition becomes true or false. The process what
i am doing is i do some code injection to replace the URLRequest
calls. The flash file in which i got this error, i did replace the
URLRequest call to my own method call and this code was being
wrapped up by an IF block. Because of the code injection, i need to
update the offset of the instructions with the difference offset
value. I did this, but i missed the jumpoffset parameter of the if
block wrapping my injected code which was the root cause. I did fix
this...
Thanks,
Prabakaran Srinivasan.

Error messages while executing File - RFC - File.

Hi,
I am doing a File - RFC - File scenario from Raj's blog.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
I am getting series of error messages.
Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
But still it shows up the same error message.
Can you guys tell me whats bad going on with my scenario?
Appreciate your help,
Venkat.

Hi Venkat,
From this line:
It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
Regards,
---Satish

Error Message while executing the Application

Hi,
I am new to Webdynpro and I created my first application by following some blog on a portal.I was able to activate my application successfully and when I executed I get this below error message.
I checked the cardinality and it is 0..1.My Inti.Lead Selection is set to NO.
I mappedthe nodes in my views also. But still i don't know whay am getting this error.
Note
The following error text was processed in the system RS2 : Adapter error in &VIEW_ELEMENT_TYPE& "VBELN" of view "Z_MYFIRST_WEBDYNPRO.MAIN": Context binding of property VALUE cannot be resolved: Node MAIN.1.NODE_VBAK does not contain any elements
The error occurred on the application server ucerp18_RS2_00 and in the work process 11 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Thanks
Kiran

Hi,
I changed the cardinality to 1:1 and I can see the selection screen. But, can you please explain why I should change this from 0:1 to 1:1.
Now I have a new error:
After I enter the sales order Number and hit my FIND button, am getting this error:
The following error text was processed in the system RS2 : Could not find attribute VBELN
Thanks,
Kiran
Now am getting a different error:
Invalid operand type for the MOVE-CORRESPONDING statement
Thanks
Kiran
Edited by: kiran dasari on Aug 20, 2009 10:54 PM

Error Message in executing MRRL (ERS) transaction.

Hi,
I am working in 4.7 EE version and I configured the Evaluated Receipt Settlement process.
While executing tcode MRRRL the system is giving the following error:
*Message No. M8446
ERS settlement: No message was found for partner 103948/company code 1000*
Please help me to solve this issue.
Regards
Sudhakar
Edited by: Sudhakar Taduvai on Jul 11, 2008 10:44 AM

Have you configured the messaging in T.Code M806? Thanks.
Please ensure that you have maintained all the partner functions in this t.code.
Edited by: Madhav Nanduri on Jul 11, 2008 3:59 PM

Error message after executing webservice

Hi all!
After giving up using the "adaptive webservice model", I am trying to use the "old" deprecated webservice model.
The model is embedded without any problems right now.
Now I am trying to call the webservice in my webdynpro application.
Unfortunately, the following error message appears:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.XmlUnmarshalException: XML Deserialization Error. Can not create instance of class [NULL] when deserializing XML type [Rentenkonto][Kunde].
Does anybody have an idea, how to fix the problem?
Thank you for your help in advance!
Kind regards, Patrick.

Hi Patrick,
unfortunately I cannot provide an ad-hoc solution for your nested exception without further investigations.
Nevertheless I'm very interested to know, why you "gave up" using the Adaptive WS Model in Web Dynpro. What's the problem?
Perhaps the coding which now requires to create a model instance:
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit() {
//@@begin wdDoInit()
// create a new model instance (1)
EmailAdWSModel model = new EmailAdWSModel();
// create model objects (2, 3)
Request_SendEmail requestMO = new Request_SendEmail(model);
SendEmail emailMO = new SendEmail(model);
// associate model objects (4)
requestMO.setSendEmail(emailMO);
// bind executable model object to context node (5)
wdContext.nodeRequest_SendEmail().bind(requestMO);
//@@end
Regards, Bertram

Ds4 can't save files. Error message: while executing onload in_opOpen.htm

All of a sudden I'm getting this error message. I can view files and create files but can no longer save files.
If I try to save a file, I get the following message:
Full text of message: While executing onLoad in_opOpen.htm, the following Javascript error(s) occurred: In file "_opOpen": onOpen is not defined
If I click ok in the alert,
The following translators were not loaded due to errors:
ASP.html has configuration information that is invalid.
Data.htm: has configuration information that is invalid.
ICERegionals.htm has configuration information that is invalid
Not sure how these were corrupted. How do I fix this problem? The resolutions I've found on line are not working.An example: delete the file called ‘WinFileCache-[random numbers].dat’.. That did not work. I'm using Windows 7 Professional.

If you've already tried clearing the cache file and personal config folder: Deleting a corrupted cache file
A good next step would be restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Here are some other troubleshooting steps: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
If nothing works, a clean reinstall will probably do the trick: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Error 0DAT while executing query

Hello All,
While executing query in query designer I am getting following error.
Component 0DAT version A does not exists in the database.
Can any one please let me know how to rectify this error.
Points will be rewarded.

Hello,
Thanks for your prompt reply.
I am looking for 0DAT in BC (object type) but could not able to find it.
I am new in BW :
Do I have to search BC in r/3 and replicate in BW then install and activate it ?or I will find in BW only?

Pop-up an error message while executing in foreground

Hi,
I have a requirement from my client, they want an error message while they are trying to executing the program in foreground. The main reason for this it does not create a spool while executing the program in foreground, it creates only in background.
Is there any way of doing this?
Any sort of ideas is highly appreciated.
Thanks,
Srini

Check with your ABAP technical memeber. He should be able to add the error message to the porgram

Getting Error message when execute Netezza Stored Procedure calling in ODI

Hi,
I need help to resolve this issue,
I'm trying to execute a Netezza stored procedure passing three parameters and It getting error message .
code:import java.sql as sql
import java.lang as lang
import java.sql.Types as types
MyCon = snpRef.getJDBCConnection("SRC")
def CALL_NZ_SP():
     try: p_log_id = 22
p_step_number = 2
          p_drive_id= 3455
myStmt = MyCon.prepareStatement("CALL SP_NAME(?,?,?)");
          myStmt.setInt(1, p_log_id);
          myStmt.setInt(2, p_step_number);
          myStmt.setInt(3, p_drive_id);
          resultSet=myStmt.executeQuery();
          resultSet.next();
          sp_return=resultSet.getInt(1);
          if sp_return !=0:
          raise 'fail';
     finally:
          pass
Please let me know is this the right code or need any code updatation.
I appreciate ur help in this regard
Thanks
brk

Hi Gowsiya,
Maybe the WCF forum would be better for this issue, you know that this forum is to discuss the VS IDE.
WCF forum link:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wcf
Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error message in executing query

Similar Messages

Maybe you are looking for