Error message on desk top, solution Center.

I keep getting an error message about the solution center. It cannot detect the correct path. I've had this printer for over one year. Can I delete the solution center without causing my printer to stop functioning ??

Hi and Welcome to the Community!
With only that limited information (e.g., no organizer app nor version, no version of the Desktop Software, etc.), all I can think to do is provide this:
KB12268 Synchronization support for BlackBerry Desktop Software for Windows
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

StorLib error message in the Lenovo Solution Center

I keep getting an error message under the device manager tab in the Lenovo Solution Center.
It says under drivers - 'StorLib bus (virtualstorage support)', status is 'Uninstalled'.
I can't find anything anywhere about this or how to correct the issue.
Any help out there?
Moderator Note; subject edited.
Solved!
Go to Solution.

The device manager pops up the screen with all the 'devices' . When I expand 'other devices', the storlib bus shows up with a yellow triangle and ! mark. Double clicking brings up a window, with status;
"The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver."
When I try to update it, no driver can be found.
One option os to uninstall it. Guess that would get rid ot the error if it is something not being used.

Geting Error message while in Lenovo Solution Center window

Getting a error message when clicked on Device Manager Icon
"LSC is unable to run because a required file is missing"
Please help resolve ASAP
Shanks

Hi Shanks,
Welcome to Lenovo Community!
I’m sorry to hear that you are having the issue with Lenovo Solution Center.
I would like to request you to reinstall the Lenovo Solution Center to resolve the issue. Please uninstall the current version of Lenovo Solution Center from uninstall or change a program option from control panel and install the latest version of LSC.
Please click the below link to download the application based on the requirement of the OS version.
Lenovo Solution Center for Windows 8.1 (32-bit), 8 (32-bit), 7 (32-bit)
Lenovo Solution Center for Windows 8.1 (64-bit), 8 (64-bit), 7 (64-bit)
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Error message - cannot connect to fullfilment center

When I try to download an e-book onto my lap top, I get an error message "cannot connect to fullfilment center. Please check to make sure connected to the internet." Connection to the internet is not the problem. I tried to uninstall and re-install Adobe Digitals - from my lirary websites - several times without any luck. Any suggestions?

Hi rod warters,
For error message "Cannot connect to Internet", you might need to refer the KB doc link as given below:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Please check and let me know
Regards,
Anubha

Error Message-- For Balancing field "Profit Center" is not filled

Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM Baby

Hi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra

Iphone 5 error message on the top saying, 601 physical nand block offset 1.

iphone 5,on the screen, apple logo on and some error message on the top saying, 601 physical nand block offset 1. once i remove the cable from laptop to phone it goes on dfu mode and can't restore the phone because of some unknown error. please help.

yeah i am on my way. lets hope they will fix.
thanks.

Parsing error in file message, can't access Solution Center

I have a HP Deskjet F4480. From initial install I get a message: Parsing error in file C:\Program files\HP\Digital Imaging\bin\hpqsdoc\1033.XML I have uninstalled the printer, downloaded the large install file from HP website and tried to install printer. Still get same error message. Printer prints, copies fine but I want to use it to scan a page and then using OCR copy data. Scanner feature from control panel will copy just fine but don't know how to get to .txt from scanned image, or how to get rid of error message. Have already run the printer diagnostic unit and scanner diagnostic unit and they detect no errors.

navigate to C:\program files\HP\digital imaging\bin\ and there we would find 2 or 3 folders with HPQSCLOC name with an extension like HPQSCLOC(608) or (109).
We have to search for 1033.xml file in all those folders and probably, it would be there in HPQSCLOC folder with numbers in brackets.
Then, we can go to the HPQSCLOC folder and copy the contents of the folder and paste the contents in HPQSCLOC folder with numbers in brackets .
Now, we can delete the HPQSCLOC folder and rename the HPQSCLOC folder with numbers in brackets as HPQSCLOC.
Then, try opening HP Solution center. It should work fine
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Hal.dll error error message: here is the solution !

Thanks to endership for the procedure. For people who were getting the hal.dll missing file error message or for those who are wondering about the right way to install Windows XP SP2 with Bootcamp, here is the steps you have to follow.
1) First, get an original Windows XP SP2 cd and be sure that your CD is bootable and that you can access the recovery console in a repair function (not all the cds got the function, so be careful).
2)After, you go in Apple applications, utilities and you click on the boot camp assistant
3)If you got a Windows partition already created that is not working, resulting from a bad installation of Windows with bootcamp, just merge the two partitions (windows and mac os x) using the restore function.
4)Use 32 Go for Windows (default option) and be sure that your Windows cd is in the drive and launch the installation.
Computer will reboot in the installation program after that all the drivers has been loaded (the blue screen lasting about 5 minutes).
5)Once your are in the installation menu, just select the option that takes you to the repair console.
6)You will get a C: command line, sort of MS-DOS. Like mentionned enderfish, type "diskpart" to visualize the partitions created and be sure that the c: drive is labeled "bootcamp". Just return to repair console in the c: command line.
7)type the following command line:
FORMAT c: /Q /FS:NTFS
You will get a quick format of the c: drive in the NTFS file system. It will also probably work in FAT32, but I've never tried.
8)After that the format has been done, hit the POWER button to reboot.
9)You will be back in the installation menu; you'll also have to wait once again during 5 minutes for the drivers loading process.
10)Once you get in the installation blue screen, just choose the partition that has been created and choose to let the file system intact.
11)Windows XP will be copying install files on the HD, install Windows XP SP2.
12)Once, the installation is done and you entered in Windows (if you followed the instructions carefully), insert in the cd drive, the Leopard CD and install Windows drivers.
13)Reboot
14)Enjoy!
Message was edited by: Bert770

In my experience (because this happened to me), I found that it was a -user error- (mine). I reviewed Apple's instructions (which said to reformat the BOOTCAMP partition) and DELETED the BOOTCAMP "C:" partition (from within the XP installer) first. When you do this, it combines with partition with the "unused" 128MB partition that separates the Mac partition from "C:".
Apparently the 128MB partition really -is- used for something; probably to help redirect XP to the proper location to find hal.dll (which is why the file -even if repaired/replaced- continues to be reported as missing/corrupted). Even XP's automatic repair won't fix this issue (as it proceeds to copy -everything- anew and still fail upon reboot with the same error).
The answer seems to be "don't delete the C: partition". Instead, just select it, hit ENTER and, -in the next screen-, format the partition (Quick is OK). Everything proceeds properly at that point.
I just finished doing seven iMacs and tried quite a number of alternate solution (suggested here and elsewhere). The only thing that worked consistently was following Apple's directions!
By the way, once I got one Mac working properly (using FAT32 as I had only a 32GB partition and I wanted to have the PC partition appear on the Mac's Desktop if we booted into OSX), I imaged the partition and tried restoring it to another Mac on which I had only used BootCamp Assistant to partition the drive. Booting into XP produced the same hal.dll error. However, if I restored to a partition that had already had a successful XP installation done to it in the proper manner, this replacement of the partition's data with the image's data was successful. (I don't know why. I tried both a "master" image and a "compressed" image; only the compressed image worked and only as noted above.)
I'm not writing this to come off as a guru; rather, this is simply what ended up working for me and I thought others might benefit from knowing what mis-steps I took (and would then not follow in those mis-steps).
Barry

C7250 All in One "Disconnected" error when trying to use Solution Center

This C7250 All in One is connected via USB to our home desktop, and we also connect wirelessly when using laptops. From my laptop when printing from various programs or e-mail the printer works fine. However, when I open Solution Center to attempt scanning or managing documents Solution Center says "Printer Disconnected" and will any functions through this program. Any ideas?

Hi All,
I got this resolved by myself. I have used a static text in my report with html code. HTML code contains &nbsp for space. And the issue was that I did not terminate &nbsp with a semicolon. That caused the error.
Solution: If you are using html for leaving space between sentences, then always terminate like this -
:) J
Edited by: user10735873 on Oct 1, 2009 5:24 AM

Error message when creating a Work Center

Hello
A new machine was bought recently. When trying to create a new work center with CR01 by copying an equivalent one, an error message appear in tab u201CCostingu201D, saying that u201CActivity Type L003 not set up for cost center 02 13730u201D. How is it possible affect activities the new cost center 13730?
Thks for hints
sb

Hi STANISLAS BRESIN,
You have to setup activity type for this work center.
You need to maintain rare for this activity for current year.
Transaction code :KP26
Enter your Controlling area, Period as 1 to 12, year as 2011, your cost center and Activity type as L003.
In overview, maintain rate in the variable rate column and Fixed rate column.
Regards,
Abhay Kapase

Error message when blocking a Work Center

Hi,
In order to block the use of a workcenter, it is recommended to go to cr02 and change u2018usageu2019 field to u2018000u2019 All task list types (see previous topic To block the use of a specific workcenter)
When changing usage to 000, an error message appears : u201CThe work center is already being used, update task listsu201D. How could it be fixed? thanks
sb

If you don't want that operation , Then
Go to CA80- work center where used list
find out the routing, and delete the respective operation in routing.
Or
If you don't want the delete the operation, Then
In workcenter , CR02 Go to Extras-->status set lock
While creating a new production order, system won't copy the locked workcenter

TS4268 What does it mean when I get the error message, "unable to contact iMessage center" when trying to set up iMessages and I click next and it starts verifying and then the error message.

What does it mean when I get the error message, "unable to contact iMessage server" when I try to use iMessage and after it starts verifying?

iOS: Troubleshooting FaceTime and iMessage activation
Apple is not reporting any problem
http://www.apple.com/support/systemstatus/

Error message on d-top and laptop--Firefox prevented this page from automatically loading--what do I need to do to fix/stop this from happening?

More often than not, I get the message "Firefox prevented this page from automatically reloading". I click ALLOW and it comes back. I click the X and it goes away and allows the page to reload.
It occurs on my homepage (MSNBC) and a few -- but not all -- of my bookmarked pages.
At times, the message DOES NOT appear but I don't know what I've done to change anything to have it not appear. A couple of days later, the message is back upon loading my homepage.
This is especially annoying when trying to get into my banking website after attempting to log in...sometimes, it doesn't work and other times, after 3 or 4 refreshes, it loads.
Any suggested solutions will be appreciated.

See:
* [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh

Error message while upgrading to System Center 2012 R2 Orchestrator

I recently tried upgrading System Center 2012 Service Pack 1 Orchestrator to System Center 2012 R2 Orchestrator on a Windows Server 2012 instance, running in VMware Workstation. According to the Microsoft TechNet documentation, you basically remove all of
the Service Pack 1 Orchestrator components, and then install the new R2 Orchestrator components.
Management Service
Runbook Service
Orchestrator console and web service
So, that's what I did. When it got to the point of running the Orchestration Console and Web Service installation, it failed.
The relevant portion of WebComponents.msi log file indicates the following:
MSI (s) (10:A8) [10:52:15:669]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIC647.tmp, Entrypoint: WriteIIS7ConfigChanges
WriteIIS7ConfigChanges: Error 0x80090016: Failed to Commit IIS Config Changes
WriteIIS7ConfigChanges: Error 0x80090016: WriteIIS7ConfigChanges Failed.
CustomAction WriteIIS7ConfigChanges returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (10:4C) [10:52:15:760]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (10:4C) [10:52:15:760]: User policy value 'DisableRollback' is 0
MSI (s) (10:4C) [10:52:15:760]: Machine policy value 'DisableRollback' is 0
Action ended 10:52:15: InstallFinalize. Return value 3.
Screenshot:
So far, I have tried removing IIS and reinstalling it completely from scratch. That has made zero impact on the problem thus far. I posted this same issue over at
Server Fault, but am adding it here for visibility.
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

Getting Error message ""This set top box does not match the account settings"

Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards, Rick

your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
Your choice 4 hour appointment window, or time on phone , or chat.
If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
Set aspect ratio MENU, OPTIONS, etc.
should take about 20 minutes per receiver.

Error message on desk top, solution Center.

Similar Messages

Maybe you are looking for