Error message: Scratch Discs Full. How do I access them and clear them?

question?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

I have PSE-12 on Mac. Got message "scratch disc full" tried changing drive to backup disc. Now PSE-12 will not open to allow me to go back to original drive. What can I do?

Using PSE-12 on my Mac and got the message 'scratch disc full' I have backup disc attached to computer and tried making this the number 1 disc. I now can't get PSE-12 to open so that I can get back and reverse the order of these discs. What can I do?

Go to your username>library>preferences and delete:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 12 paths
Adobe Photoshop Elemetns 12 settings
and any lockfiles with the same names. That library is hidden in 10.7 and up. To see it, click the Go menu in the finder and hold down the Option key and it will appear below the little house for your user account. While you're in there go to the saved application states folder and delete any for PSE.

Error message: "scratch discs are full".

I have just started using the above I cannot use the above because I get a message that says:- Cannot initialise photoshop because the scratch discs are full. I cannot get into the program to get to the edit menu to try an change the settings. Can anyone help
Alan

Hi Alan 12,
What operating system are you using?
How much space is left on your hard drive and what is the size of the hard drive that photoshop 7 is installed on?
The usual reason for that message on modern computers is that your hard drive has more than 1 TB of free space
and since photoshop 7 came out before such large hard drives were common, it can't read the large amount of
free space and gives the message about the scratch disk being full.
The best solution is to have photoshop 7 installed on a hard drive that has less than 1 TB of free space.
You might also try pressing the Alt+Ctrl keys just after clicking or double clicking on the photoshop 7 shortcut and keep
holding the keys until you get a dialog where you can choose another hard drive (or partition) for the scratch disk.

Scratch Disc Full: Where are the temp files kept?

Hi,
I just tried to open a few of very large image files (9GB in total) and when I did I got the message "scratch discs full". Now I understand why that happened, but it seems to have eaten a whole load of disc space that wont come back. I've since closed photoshop, restarted my Mac, etc. but about 10 GB is still used up where it wasn't before. I can't locate any temp files anywhere (prefs only tells me the scratch disc is my Mac HD, not which folders it's in). Can anyone help me with this? Where are Ps temp files usually located on a Mac? I need those 10GB back!
Mac OSX running Photoshop CS3
Thank you!

Hi again Chris (or anyone else who cares to contribute),
My Mac's HD space continued to disappear and I have now, finally, located the cause (I think). I checked the system log (Stystem Profiler/Software/Logs/system.log) which was itself 4.5 GB in size (too large I think?). However, when I went to the file location (/var/log/system.log) I also noticed that the "asl" folder (in the same folder as the system log) was 20 GB in size!! Having read a few forum posts about similar issues, I took the risk of deleting both the system.log and the majority of files in the asl folder. This seems to have worked a treat (I now have 25GB returned to me).
As I said in my original post, this all started happening when I opened a few very big Photoshop docs (ones with layers). Do you have any idea what caused / is causing this to happen? I haven't opened Photoshop since deleting the asl files, but new ones still seem to be appearing in the asl folder. They are tiny (100KB at most) but I'm a little concerned I haven't fixed the problem. Any suggestions?
I can't see why new asl files would be appearing when I haven't even opened Photoshop.
I'm running on OS 10.5.8
Many thanks,
Matt
P.S. By the way, the size of the system.log seemed to be caused by a repeated message regarding RealPlayer, which I assume is unconnected, but I have included it below just in case (I've removed RealPlayer from my Mac to see if that helps, but the asl files still seem to be appearing):
Jul 28 18:16:07 localhost RealPlayer Downloader[299]: Failed to create window context device
Jul 28 18:16:09: --- last message repeated 1 time ---
Jul 28 18:16:07 localhost RealPlayer Downloader[299]: _initWithWindowNumber: error creating graphics ctxt object for ctxt:0x1152b, window:0xffffffff
Jul 28 18:16:07 localhost RealPlayer Downloader[299]: CGWindowContextCreate: failed to create context delegate.

I'm running OS X 10.7.5 on my MacBook Pro. I can't get a DVD to eject. I'm getting an error message "supported disc not available". How can I get the disc to eject?

I'm running OS X 10.7.5 on my MacBook Pro. I can't get a DVD to eject. I'm getting an error message "supported disc not available" when I try to use the DVD player eject button. It also does not show up on my desk top as an icon as it normally would. How can I get the disc to eject?

see Thread
https://discussions.apple.com/thread/3996208?start=0&tstart=0
and Kappy reply

The error message "Scratch disk is full" when trying to create

the error message "Scratch disk is full" when trying to create a image/logo in Photoshop CS6

Hi Weed42,
This has been discussed in the following forum links:
http://forums.adobe.com/thread/1164997
http://forums.adobe.com/message/4968658
Let us know if this helps,
Regards
Gurleen

What does it mean when I get the message "scratch disc is full"?

Trying to work on Photoshop and I'm getting the message, "scratch disc is full".

Ultimately here is the deal. Like OS X and Windows do at the system level, Photoshop will grow a virtual memory scratch file on your hard drive if you don't have enough RAM to do what you are trying to do.
That means, step 1 in preventing the scratch file is to put more RAM in the Mac so that Photoshop doesn't run out so fast and have to shove data off to the disk to make room.
Step 2 is to put the scratch file on another disk. This is why pros have often used desktop towers, because you can put multiple disks inside them. For example, system on one disk with lots of free space, photo library on another disk so it can grow freely, and another disk that is used exclusively to hold scratch files for Photoshop and other programs that need to do the same thing like Apple Final Cut. Splitting the data streams (system, file access, scratch) like this also speeds up the machine considerably since they're not all trying to use the disk at the same time.
The way you put the scratch file on another disk is to go into the Photoshop prefs, click Performance, and assign one of your other disks as a Scratch Disk there. (Use a fast disk, not a network or USB 1.0/2.0 disk, and partitioning your main disk will not help.)
If you do this, you don't need to change your main disk at all, you don't need to manually move any files off of it. Because by moving the scratch file off your main disk, the 58GB of free space you have there will now be plenty.
I used to use a PowerBook with an external monitor as a Photoshop machine, and plugged in a FireWire 800 external as a scratch disk. Even just doing that helped a lot.

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Getting error message for "user created how tos" CS3

I tried to create some new How Tos in CS3 and recieved the following error message when I try to open it:
"The Adobe Help application could not load a URL because the specified file could not be found. You may need to re-install the application and the help component."
If I access one of the ones created with CS2 it opens (I dragged them over from CS2, I have since removed CS2 from this computer, it's still on my laptop) I haven't tried creating them and importing them to this computer).
I'm using Microsoft Office Word 2003 to save the How Tos as html files, and notepad to edit Add_001.howto file.
Since I gotten this error, I reloaded CS3 Design Standard, it didn't fix the problem. Also I have ensured that the Add_001.howto file points to the right location (C:\Program Files\Adobe\Adobe Photoshop CS3\Help\additional how to content)and is in the right format:
"John Shaws CS3" "47. A GLOSSARY OF IMAGING TERMS" 47.html (works).
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html (doesn't work)
The only thing new on the computer is a brand spanking new EVGA NVidia Geforce 9500GT PCI express(512 mb ddr2 dual DVI output) with the latest drivers. It replaced NVidia GeForce 6600GS and Matrox Millenium video cards (the Matrox). The new video card does not include some program that allows it to run MS-DOS programs, but I don't feel that is causing the problem.
System Info:
Photoshop CS3 10.0.1
Computer: Gateway DX310X with Gateway FPD1975W and FPD1730 monitors
Windows XP Media Center Edition, Service Pack 3
Intel Pentium D proccessor
1GB internal memory
168GB of free space on hard drive.
I hope I have given you suffiecient information to give me some possible solutions.
Thanks
Rick

Mylenium
Thanks for the assist.
It isn't a Windows Indexing Service problem.
It is an operator problem. As you pointed out the long name and spacing are the issue here.
I changed the the Add_001.howto file from:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" Noise Ninja 001.html
to:
"Noise Ninja" "The Thirty Second Guide to Noise Ninja" NN001.html
I changed the file in the Additional How To Content folder, to match.
And it works now.
Now that I know what was wrong with my file names, I'll be able to get the various plugin help files/documents into Photoshop so I won't have to get out of it to get help on them.
Thanks
Rick

My iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

No need to Double Post... It is considered impolite.
https://discussions.apple.com/message/20652820#20652820

My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain?

My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain? Obviously the one of the other movies first..

Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks!

When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

1) The older version of Bonjour can not be removed. Contact your technical support group.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message: Scratch Discs Full. How do I access them and clear them?

Similar Messages

Maybe you are looking for