Error Message "truePGItemModel" on generation

Hi All:
Using JDeveloper 10.1.3.4.0.4270.
JHeadstart 10.1.3.2.51
Upon the first Generate of a JHeadstart Application, I received the following error. I searched this forum and did not find a reference to this error. Any assistance is appreciated.
"Could not instatiate JhsApplicationGenrator class: No bean named 'truePGItemModel' is defined"
Mary
UofW

Hi Evert-Jan:
I greatly appreciate your reply. When I did a search on truePGItemModel in the specified application, none was found as shown below.
Looking for: truePGItemModel in: AREditAcademicFees.jws
Found 0 occurrences in 3339 file(s)
So I did a search on PGItemModel only and found the following, all in the jag-config.xml. This is a copy of the search output As you can see, only one is listed as "true". Would you like to see the entire jag-config.xml file?
Thanks so very much, I'm really not sure what to do at this point....
Mary
U of Windsor
Project: C:\JDeveloper\AREditAcademicFees\ViewController\ViewController.jpr
C:\JDeveloper\AREditAcademicFees\ViewController\templates\config\jag-config.xml
(12,76): 1.4 Added queryBindParamsRowSpecificDomainManagedBeanModel, graphPGItemModel, listPGItemModel
(12,93): 1.4 Added queryBindParamsRowSpecificDomainManagedBeanModel, graphPGItemModel, listPGItemModel
(16,34): 1.2 Renamed secretFieldPGItemModel to secretPGItemModel managed bean def
(16,55): 1.2 Renamed secretFieldPGItemModel to secretPGItemModel managed bean def
(284,17): <bean name="pgItemModelHelper" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModelHelper" singleton="true"/>
(284,90): <bean name="pgItemModelHelper" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModelHelper" singleton="true"/>
(286,26): <bean name="textInputPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(286,93): <bean name="textInputPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(293,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(293,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(295,26): <bean name="dateFieldPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(295,93): <bean name="dateFieldPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(302,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(302,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(304,30): <bean name="dateTimeFieldPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(304,97): <bean name="dateTimeFieldPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(311,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(311,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(313,27): <bean name="fileUploadPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(313,94): <bean name="fileUploadPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(316,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(316,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(318,29): <bean name="fileDownloadPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(318,96): <bean name="fileDownloadPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(321,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(321,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(323,22): <bean name="imagePGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(323,89): <bean name="imagePGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(326,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(326,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(328,23): <bean name="editorPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(328,90): <bean name="editorPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(333,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(333,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(335,29): <bean name="displayFieldPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(335,96): <bean name="displayFieldPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(338,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(338,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(340,29): <bean name="dropDownListPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGDomainItemModel" singleton="false">
(345,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(345,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(347,21): <bean name="listPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGDomainItemModel" singleton="false">
(352,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(352,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(354,25): <bean name="checkBoxPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGDomainItemModel" singleton="false">
(359,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(359,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(361,31): <bean name="radio-verticalPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGDomainItemModel" singleton="false">
(366,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(366,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(368,33): <bean name="radio-horizontalPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGDomainItemModel" singleton="false">
(373,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(373,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(375,23): <bean name="hiddenPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(375,90): <bean name="hiddenPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(378,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(378,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(380,23): <bean name="secretPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(380,90): <bean name="secretPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(383,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(383,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(385,22): <bean name="graphPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(385,89): <bean name="graphPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(388,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(388,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(390,27): <bean name="flexRegionPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(390,94): <bean name="flexRegionPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGItemModel" singleton="false">
(393,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(393,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(395,20): <bean name="lovPGItemModel" class="oracle.jheadstart.dt.jag.pagegenerator.pgmodel.PGLovItemModel" singleton="false">
(400,23): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>
(400,53): <property name="pgItemModelHelper"><ref bean="pgItemModelHelper"/></property>

Similar Messages

Get Error message with Roport Generation toolkit

Hi:
I am new to labview and want to make a report that content of the FFT spectrum data and FFT figure. a error message as *The report generation toolkit does not support the data you are using*.I used a for loop for calculate the FFT,does this cause the problem?I really do know how to settle it.Any suggestion is welcome!Thanks in advance!!

You do not need to use the Unbundle function - you already have the data available, so you're just performing an operation to get data you already have. Just use wires:
yujin wrote:
.I really do not know how to add the waterfall to report,it seems can be translate to waveform.Even it is translated the report will also just be 2D show but not waterfall show.I wonder how I can get the picture of the waterfall,if so I can get it into report.But I do not know how I can do this,can you teach me?
I don't have LV 2009 running right now, so I can't give you the details, but basically what you need to do is to the get the image of the graph and add it to the report. You can use the Image to File method to save the image to file and then use the Report functions to add the image to the report. I can verify this tomorrow.
Attachments:
rewire.png ‏9 KB

Cannot publish get error message - log file not being created

When trying to publish a FlashHelp project, I get an error
message window that says "Publishing has been cancelled. Failed to
create file: (project name).log "
When I click okay in the message window, the publishing
process stops. However, if I look in the SSL folder, I see the log
file. It is a text file.
I had this problem in January 09 but it seemed to be an issue
with the password and path in the FTP command window. I fixed it
and it worked fine. However, I haven't published since the end of
January. Now, when I try to publish, it is giving me the same error
message. I checked and reviewed the FTP window fields and they are
fine. But I'm still getting the error message and can't publish.
Why?
I need to get this problem fixed ASAP and ensure that it
doesn't occur again. What's strange is that I've got 3 other
projects and this is the only 1 that gets this error message.

Yes, the generation worked. I checked the log file that
worked from the time it worked before and it seems to be the same
as the log file that is generated when I get the error message.
I created a new FlashHelp layout and got the same error
message. What's really weird is there is a log file in the SSL
folder but when you click OK in the error message, it stops the
publish function.
Last time I had to blow away the cpd file as if this was a
corrupt project. But that gets to be painful. As I use templates to
put change dates in the footers of topics and templates get lost
when you blow away the cpd.
Any other thoughts?

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

Report Generation Toolkit - Error message rpcrt4.dll

Hello
My labview app. calls functions from the Report Generation Toolkit. I tested the runtime version, and this work fine under in Windows NT and Windows 2000, but does not work under Windows 98. I got and error message say "rpcrt4.dll Page not valid" that seem come from Windows and is related to a Remote Procedure Call. I already check the version of this dll 4.71.2900

The rpcrt4.dll is part of the DCom98 package. I have seen other problems, unrelated to LabVIEW, with this .dll arise when other programs have installed different versions of some of the DCom DLLs. You may want to consider trying this program out on another Win98 machine, or you may want to search through the Microsoft Support page for errors with this dll, specifically with the error number in the message you receive. The ones that I have seen have suggested restoring the DCom dlls to the original ones from the Win98 disk. There is also an update to the DCom components for Windows 98 (version 1.3) on the Microsoft website.

Error message when restoring my 4th generation iPod touch

I own a 4th generation iPod touch. Eventually the device it self became slow. So there fore I tried to restore it. But unfortunately, the process failed. I tried this method several times and It gives an error message every time when start the process. The device is now in recovery mode. The iTunes version I have is 10.0.1.26. The device contain the latest version of iOS 6 update.
The following is the error message:
[ "The iPod "iPod can not restored at this time because the iPod
software update server could not be contacted or is temporareily
unavailable.
Please try again later." ].

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock

First Generation Ipod Nano gives error message when using Windows Vista

I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
Conclusion: Early Nanos work with XP, but do not function properly with Vista.
Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.

All of the following programs should work with Vista.
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.

Receiving Error Message : Cost Of Goods Sold Account Generation Failed

Hi All,
We need some assistance with this issue...for a given item when the Customer RMA order Line is being received into a given organization/sub inventory/locator we are getting this error message in the Receiving Transactions Interface ( RTI ) as mentioned below.
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
We checked for this item in the organization the Cost of Goods Sold Account has been defined in the Costing Tab in the Item-Org Assignment and this GL account is also enabled on the GL side and is Active.
The scenario is like this :
1. Firstly this item is shipped out on an Outbound order line to the customer location and we checked for the valid Sales Order Issue transaction against this item for this order. We checked for its Inventory Distributions as well.. these look to be valid.
It shows : Inventory valuation account is decremented while the Deferred Cogs of Goods Sold account is incremented.
2. Then this item is being entered on Return order line and after booking the order line . It goes to Awaiting Return status. Next the user tries to attempt the Receipt for the Customer RMA order line for this item we are getting the error mentioned below in the RTI tables :
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
Coudl someone please assist us with this issue as this is happening in Production instance ..that would be very helpfull of you..
This is an urgent issue
thanks

Hi,
Standard workflow "OM : Generate Cost of Goods Sold Account" has following steps:
1/ Start generating Code Combination
2/ Get CCID for a line
3/ Copy Values from Code Combination
4/ Validate Code Combination
5/ End generating Code Combination
If I want to modify the segment4, the custom function to set the attribute FND_FLEX_SEGMENT4 need to be inserted just after the step "Copy Values from Code Combination" (NOT just after "Get CCID for a line").
Is it what you have done?
J.

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is off

My first generation AppleTV will not sync with iTunes anymore. I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689" firewall is turned off.. Any ideas?

Thanks Rudegar,
I only synch and do not stream off of my 1st Gen AppleTV
I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
Will keep working on other fix options (factory reset, etc.)
Thanks again

LSMW error message during "Start Idoc generation"

Hi ,
I am getting error message "'/tmp/YS.lsmw.conv' File Has Not Been Accepted for Processing"
during the step "Start Idoc generation" in transaction LSMW.
Please help to solve this issue.
Thanks & regards,
Yogita

Hi,
I already have set port and partner function.
As per the details of the error message, it says "
System Response
Clarify if the inbound file is a Unicode file.
Procedure
If it is not a Unicode file, change the port definition and then start inbound processing again.
If it is a Unicode file, then the file must be generated with the 'EDI_DC40_U' indicator. This must be clarified with the creator of the file.
I have added the check Unicode fomat while defining the port.
Can you please help?
Regards,
Yogita

I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message!

I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!

What is a error message and what do you see when it appears?
Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
Perhaps it was a bad update, have you ran through this list of possible fixes?
Do as many as possible, starting with #1. Until the problem is resolved.
Use the boot 10.6 USB instead of the disk of course.
Step by Step to fix your Mac

I'm gettin an error message when I try to play a movie a rented using Apple TV 2nd generation. How do I solve this?

i'm gettin an error message when I try to play a movie a rented using Apple TV 2nd generation. How do I solve this?

I don't believe I've seen a solution to that error code. There's a new version of iTunes out, have you installed it yet, it might be worth trying. You might also try restarting your Apple TV and router.

I have a 2nd generation iPod touch. I have not updated the software from version 2.2.1. When I connect to iTunes to update to 4.2, I keep getting an error message. Has anyone else had this issue and figured out a way to fix it?

I have a 2nd generation iPod touch. I have not updated the software from version 2.2.1. When I connect to iTunes to update to 4.2, I keep getting an error message. Has anyone else had this issue and figured out a way to fix it?

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too

HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation

Error Message "truePGItemModel" on generation

Similar Messages

Maybe you are looking for