Error Message usage

Hi, I have a issue where my customer has given me a predefined error message but in reality it is an business error. they want it to be a syncronous interface where there is a request, response and the "error" message they have provided. it works like this: if the request message contains a company code that does not exist then they want the "error" message to flag it. but the thing is that if I use syncronous interface then i have to put the "error" message in the Fault Message type field...which then gives gives system error in my sxmb_moni. my issue is that the "error" reply is actually not an system error but a business error...which means that if the company code does not exist i want to return a normal message with their predefined "error" structure. I don't want it to return actuall error in the log.
anyone?

Hi Sonny,
error message but in reality it is an business error.
Business errors are nothing but Application Error only and Fault messages can only be used in case of application errors.
then gives gives system error in my sxmb_moni
It should not give any system error you must have done something wrong while mapping the Fault messages just check if mapping that includes fault messages is executing propelry. Also what is the error that you are getting in moni ?
You can do one more thing :
Perform the lookup in the mapping for company code if the source company code matches then go ahead else show some messges through  Mapping only.
Thanks
Sunil Singh

Similar Messages

  • Error message during the usage decision

    Dear Gurus,
    While performing the usage decision in txn  code QA11, i entered the relavant quantities in unrestricted-use.
    Then when i tried to assign the UD code i am getting the following error message.
    "You have no authorization for this catalog entry Message no. QS291"
    But QA11 authorization is already there, apart from that which authorization is required.
    Please give your inputs
    Thanks and Regards
    Hari

    Hi,
    As the error message says Authorisation for Calatalg 3 and the related code group is missing.
    When u get this message just run /nsu53 on your screen so you know which objects are missing. Maintain those vlaues or ask Basis to mainatin these values.
    Regards,
    Nitin

  • Trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings

    trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?

    The storage you purchased is in the cloud, and doesn't do anything with your pad.  Your problem is simply that you have too much content on your pad.   Go to settings, general, usage, and it will show you how much space you have avaliable on your pad.  If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
    You have to no option but to delete some of the content on your pad.  Videos, comics, pitcures and some music files use a lot of space.   The cloud allows you to leave stuff there, so you can get it when you need it.

  • Premiere Pro export issues. Unknown error messages, extremely slow export times, strange I/O & disk usage

    Hello,
    I'm hoping I can start getting answers to some big issues I've been having running Premiere pro. I've had similar issues with CS6 but it seems like with CC and every recent update, the problem hasn't been resolved, its even worse.
    The main issue I have is seeing the 'unknown error' message everytime I try to export a file. I'm working with RED footage. When I turn off the CUDA support, I can export without the error but my export time goes from a few minutes to sometimes hours in the render time!
    I've looked through pages and pages of forums and there are so many people saying the same thing, with millions of opinions of what the problem is. Regardless, the only thing I tried that worked so far is turning off the CUDA support.
    Now something I recently noticed, is that the difference isn't the GPU usage, I still show GPU being used at 500mb or 1gb out of the 2gb that it has (GTX 680)
    The strange thing is without the mercury playback option, I'm seeing that disk usage and I/O go way down to kbs from a very high number. This would make sense why I'm seeing such huge changes in render times even though it still shows my 6 core CPU maxed out and ram over 40gb out of 64 that are installed.
    Does anyone have a suggestion on what may be happening here? Its the only thing that has plagued my system using Premiere since day one and there seems to be no way around it..

    Best way to get a real answer is go to the Tweaker's Page, download the most recent PPBM benchmark test, and run it. It's a folder that has a resource monitoring/logging program and a PrPro project with files that is short but HEAVY in effects, both AE and PrPro, so it tests all parts of a system's capabilities from disc in/out to GPU capability/use to CPU, fsb, RAM, you name it ... and after sending that back in you get a complete report on where your computer did well and what the choke-points were.
    Also ... over on the Hardware forum is the place where the techies amongst us hang ...
    Neil
    Tweaker's Page ...
    http://ppbm7.com/index.php/tweakers-page
    Hardware Forum ...
    https://forums.adobe.com/community/premiere/hardware_forum

  • Usage Control Error Message

    I subscribed to Usage Control last month. I have tried to access the features, but I get this error message every time:
    The System is currently unable to display Usage Controls details. We apologize for this inconvience. Please check back later. Thank you.
    It's frustrating when I'm paying for an added service that I can't access.

    Hello,
    For this issue, we need to research your account to ensure the provisioning is established correctly and verify that the correct credentials are being used to access Usage Controls.  
    For immediate assistance, please call our Technical Support team, from an alternate phone, and call 1-800-922-0204, option 3. Please be in front of your computer when you call.  For more information on Usage Controls, please visit the link below:
    Usage Controls
    Thank you.
    KellyW@VZWSupport

  • HP Envy 15 shut down randomly during usage, no error messages, no overheating

    hi,
    I bought my HP Envy 15 only in July and 3 days ago it started shutting down randomly! I would be using my computer or the computer would be turned on, then it suddenly would shut down by itself. When I start it back up again I don't get any error messages so I can't figure out what's going on. This has happened 5 times within the past 3 days. The last time it happened, I was browsing a website and then the computer just shut down with a clicking sound! Overheating is not a problem because the computer is barely lukewarm and I'm not running any softwares. PLEASE HELP!!!

    Hi @newhpuser2014 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15 and just randomly starting to shut down.
    I recommend to do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I would suggest a date of just over a week before the issue started.
    When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Do not disconnect show continually.  Error message is files on the ipod are being used by another program

    I get the "Do not disconnect" message all the time.  When I try to eject the ipod the error message is that the ipod can not be disconnected because it is in use with an other application.  I turn off all antivirus protection and the same result.  I can not find what other application is accessing the ipod.  The only way I can disconnect is to go to the drive that it is assigned to, and do an eject.  The unit will sync properly but will not eject for itunes.

    Forgot to say the mananging files manually and disk usage are not checked

  • Problem with JDK 6 update 5 - Error Message says cant find java compiler

    Hi i am a complete beginner to programming and i am having trouble with the latest java development kit. jdk 6 update 5.
    The problem is i have set the path and the program cant find my compiler.
    I have installed the latest java development kit 6 update 5 on my windows xp machine.
    I have created a simple program as shown below:
    class Hello
         public static void main(String[] args)
                   System.out.println("Hello from java");
    saved the file to my desktop as Hello.java
    I have set the path variable like so:
    Go to control panel then click system icon then click advanced tab then click environmental variables.
    Now in system variables the path is shown as this - %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Java\jdk1.6.0_05\bin;C:\Program Files\QuickTime\QTSystem\;c:\Program Files\Microsoft SQL Server\90\Tools\binn\
    I then add this to the end;C:\Program Files\Java\jdk1.6.0_05\bin
    This is the location to the things like compiler, applet viewer etc.
    No in the command prompt i type javac Hello.java and i get this error message:
    C:\> javac Hello.java
    javac: file not found: Hello.java
    Usage: javac <options> <source files>
    use -help for a list of possible options
    The jdk is installed properly im sure but it can find my compiler.
    What mistake have i made in setting the path because im guessing that is related to the problem?
    Could someone out there please help me?
    Thank You
    Rafeeq

    saved the file to my desktop as Hello.java
    C:\> javac Hello.javaC:\ is not the desktop!
    The jdk is installed properly im sure but it can find my compiler.Of course it can! It just can't find the file you are trying to compile, because that's not in the root directory.
    I suggest you make a directory C:\java and save your source file there rather than on the desktop. In the command prompt, enter cd \java to make it the current working directory and then enter javac Hello.java.
    @Pravin: The question is about compiling, not running. CLASSPATH has nothing to do with this problem.
    db

  • Upgrade to 3.13.4-1 causes drm error message

    Before the recent update to kernel 3.13.4-1 to accommodate modular keyboard support, I didn't have any error messages printing at boot time. Now drm is complaining:
    dmesg | grep drm
    [ 0.651849] [drm] Initialized drm 1.1.0 20060810
    [ 0.678595] [drm] Memory usable by graphics device = 2048M
    [ 0.678602] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 0.781919] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 0.781922] [drm] Driver supports precise vblank timestamp query.
    [ 0.878594] [drm] Wrong MCH_SSKPD value: 0x16040307
    [ 0.878597] [drm] This can cause pipe underruns and display issues.
    [ 0.878598] [drm] Please upgrade your BIOS to fix this.
    [ 0.894216] fbcon: inteldrmfb (fb0) is primary device
    [ 2.348167] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 2.381521] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up
    [ 3.077032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.105865] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    I'm running on an ASUS UX31E, so I have i915.i915_enable_rc6=1 in my kernel line.

    I'm pretty sure my original upgrade was from 3.12.
    I just upgraded to 3.13.6 today, and now I'm experiencing crashing sometimes when xscreensaver starts (it was while watching a youtube video; my window manager is XMonad, which also crashed; I killed X from another tty and it automatically came back to my lightdm login). This crashing was happening pre-3.12 as well, but went away with 3.12 and also wasn't there with 3.13.{4,5}.
    My guess is the xf86-video-intel package sucks and isn't keeping up with changes to the kernel.

  • How to prevent error message for material description in MDG material detail screen, when user click on check action

    Dear Experts,
    I have a requirement for making material description as non mandetory in change request view of mdg material screen.
    I have done that using field usage in get data method of feeder classes, but still message is displaying.
    This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
    How to prevent error message for material description in MDG material detail screen, when user click on check action.
    Thanks
    Sukumar

    Hello Sukumar
    In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
    You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
    Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
    Regards, Ingo Bruß

  • Is there a facility to more easily sync music my four Apple devices and my wife's three Apple devices without the horrid iTunes error messages when there is nothing wrong with our connection?

    We’ve been using iTunes Match pretty much since the beginning, but recently my wife has turned it off and refused to re-subscribe. I’m fast getting to the same place. It just seems so unstable, wishing Apple would invest some of their billions into it. I read with dismay how many people find Google Play to be so much better. As I write this I see a “Cannot connect to iTunes store” on my iPhone. Noting wrong with our connection … it’s alive and well.
    Bearing in mind that I have two Macs, an iPhone and an iPad and my wife has a Mac, iPhone and iPad what we really want is the following.
    I want all our music to go up to one location (iCloud or even better our own server). I want an app or web app that I see on the right hand side a list of artists or albums (or playlists) and columns for each device. I want to be able to tick the “matrix” to specify which devices the artist/album/playlist should be downloaded to. When the device is switched on, it must download (no fuss no bother and no stupid I-can’t-do-anything-about error message). A nice enhancement would be to specify three options for each entity (Download, Stream, Not Available). There must be options to easily bulk select.
    So … is there such a thing out there?
    In my immediate family plus spouses and kids girlfriends/boyfriends there are 11 Macs, three iPads and 10 iPhones. My brothers are very similar. I have nieces and nephews that use Apple. My parents also use Apple. Collectively, we have a bunch of Apple equipment.
    Did I mention I'd like it to be stable?

    Unless you have EE 4G service the UK 3G networks are the base of your problem - they are just far to variable in download and streaming speeds.
    Add to the fact that use can/will eat into your Data usage !
    ITunes Match as a service is pretty experimental at best over 3G and really i think so long as you have a 32GB or larger iOS device sync'ing via iTunes on a PC/Mac remains the best way to transfer music.
    Remember even with iTune Match your music is STILL ON your own PC/Mac HDD !
    Usng the devices tab in iTunes you can customize each differing identified iOS device and load as you please.
    When we have a competitively priced stable and extensive LTE network in the UK then reconsider Match at that point.

  • Suggest a way to raise error message.

    Hi Gurus,
    i am developing an enhancement for transaction QA10, QA11, QA12, QA16 , QA17, QA40, QA41.
    above transactions are to perform UD or Change UD (Usage Decision ) in foreground or background mode.
    Our requirement is to raise a error message if any NOTIFICATIONS are OPEN in QMEL Table for Material and Batch Combination for which UD is been done.
    We have to generate an error message as-  Open Notification XXXX for material XXXX Batch XXXX exist.
    But we can have more than one Notification for a material and batch combination, notifications can be of any number.
    we cannot show the error message as a-
    1.  pop-up with alv containing error's as UD can be also done in background mode.
    2.  nor we can raise a long message as Notification's can be of any number.
    what are the ways we can show error message in this scenario.
    Regards,
    Akash Rana

    Issue Resolved

  • Inline Error Message in a table cell

    There is a requirement where in an error message is to be thrown in a table cell.
    (For eg, when the filed value is getting populated from a VO.Considering the scenario where the value is null for some reasons.)Can anyone suggest to implement the same?

    It is possible with the controller coding.
    User putAttrDialogMessage method on pageContext.
    public void putAttrDialogMessage(OAWebBean webBean,
    OAException message)
    Registers a dialog message for a web bean that is not based on a view object. The dialog message will be displayed in the message box located in the top section of the current page and also attached to the corresponding region item as an inline message.
    The proper way for preserving the bad value which caused the exception is by using OAAttrValException as follows:
    OAMessageTextInputBean textField = ....; // webBean in question
    OAAttrValException attrEx = new OAAttrValException(
    OAAttrValException.TYP_VIEW_OBJECT, // Just default it to ViewObject
    null, // View Usage Name as null
    null, // The primary key as null
    textField.getDataAttributeName(), // The attribute name
    value, // The attribute bad value which caused validation failure
    "FND", // Message application short name
    "ATTR_EXCEPTION_MSG"); // Message code
    pageContext.putAttrDialogMessage(textField, attrEx);
    Parameters:
    webBean - the web bean to which the message belongs
    message - an OAException object representing the dialog message. An appropriate message type must be set on the exception object through the constructor.
    Do let me know if you got struck.

  • RAR: Error message while running role risk analysis.

    Hi All,
             We are implementing RAR 5.3. When running permission level risk analysis we get the following error message:
    "Error while executing the Job:Cannot assign a blank-padded string to host variable 1.u201D
    This happens only at permission level for just one single role and for all the composite roles that contain this one.
    The rules were generated without any issue and we cannot find anything unusual on that particular single role.
    Any ideas of what could be the cause of this error?

    Hi Iliya:
              Please find below the job log with the detailed error description:
    Mon Dec 15 10:06:37 GMT-02:00 2008 : -----------------------Scheduling Job =>233---------------------------------------------------------------
    Mon Dec 15 10:06:37 GMT-02:00 2008 : --- Starting Job ID:233 (RISK_ANALYSIS_ADHOC) - mm:user10
    Mon Dec 15 10:06:37 GMT-02:00 2008 : ----------- Background Job History: job id=233, status=1, message=mm:user10 started
    Mon Dec 15 10:06:37 GMT-02:00 2008 :  Job ID:233 : Exec Risk Analysis
    Mon Dec 15 10:06:37 GMT-02:00 2008 : Start Analysis Engine->Risk Analysis .....  memory usage: free=1571M, total=1962M
    Mon Dec 15 10:06:38 GMT-02:00 2008 : Rule Loader Syskey => *
    Mon Dec 15 10:06:38 GMT-02:00 2008 : No of Systems=1
    Mon Dec 15 10:06:51 GMT-02:00 2008 : Action rules cache loaded: memory used in cache=56M, free=1512M, total=1962M
    Mon Dec 15 10:06:51 GMT-02:00 2008 :  Job ID:233 : Rules loaded,  elapsed time: 13694 ms
    Mon Dec 15 10:06:57 GMT-02:00 2008 :  Job ID:233 :
    Mon Dec 15 10:06:57 GMT-02:00 2008 :  Job ID:233 : Analysis starts: MM:USER10
    Mon Dec 15 10:07:16 GMT-02:00 2008 : Auth Map cache reloaded successfully
    Mon Dec 15 10:07:32 GMT-02:00 2008 : Cannot assign a blank-padded string to host variable 1.com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
    com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
    com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:66)
    com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
    com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
    com.virsa.cc.xsys.util.ObjTextReader.lookupByKey(ObjTextReader.java:353)
    com.virsa.cc.xsys.util.ObjTextReader.getFieldValueDesc(ObjTextReader.java:261)
    com.virsa.cc.xsys.riskanalysis.AnalysisEngine.insertPermReportLines(AnalysisEngine.java:2286)
    com.virsa.cc.xsys.riskanalysis.AnalysisEngine.outputPermissionViolation(AnalysisEngine.java:1858)
    com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1182)
    com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:243)
    com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:207)
    com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:305)
    com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:183)
    com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:154)
    com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:81)
    com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:434)
    com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1223)
    com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
    com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
    com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
    com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
    com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
    com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
    com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
    com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    java.security.AccessController.doPrivileged(Native Method)
    com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Mon Dec 15 10:07:32 GMT-02:00 2008 : Cannot assign a blank-padded string to host variable 1.com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:309)
    com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:183)
    com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:154)
    com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:81)
    com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:434)
    com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1223)
    com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
    com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
    com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
    com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
    com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
    com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
    com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
    com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    java.security.AccessController.doPrivileged(Native Method)
    com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Mon Dec 15 10:07:32 GMT-02:00 2008 : Job ID: 233 Status: Error
    Mon Dec 15 10:07:32 GMT-02:00 2008 : ----------- Background Job History: job id=233, status=2, message=Error while executing the Job:Cannot assign a blank-padded string to host variable 1.
    Mon Dec 15 10:07:32 GMT-02:00 2008 : -----------------------Complted Job =>233---------------------------------------------------------------
    Regards.
    Leandro.

  • Error message while re-placing the MIC

    Hi all,
    I want to replace a MIC (Complete copy model type) for the master recipe. When i tried to replace the MIC in QS27 i got the following error message.
    Message no. QP879
    Diagnosis
    There may be several reasons that lock indicators appear in the first column. For example:
    The master inspection characteristic is unlocked and only used as a copy model.
    The characteristic is not completely maintained.
    A user exit is active (see Implementation Guide).
    The replacement was happening for "Reference char" but not for complete copy model.
    I have to replace the MIC's for more than 2000 materials( Master Recipe). Kindly suggest how to address this issue.
    My requirement is i want to change the version number of one particular MIC in all master recipe.
    Example: To replace MIC_APP version 1 with MIC_APP version 2
    Awaiting for your inputs
    Regards
    Hari
    Edited by: Harikris_83 on Feb 20, 2012 7:15 PM

    Hi FF,
    Thanks for your reply.
    I tried through CWBQM. But the working area is not available for master recipes.
    It is available only for the following.
    N     Routing
    S     Reference operation set
    Q     Inspection plan
    Also i tried to create working area for master recipe in QCC0>>>Quality Planning>>Engineering work bench>> Define Work Areas.(Txn code: OQ77)
    But here the Usage area by default it is coming as Q(Inspection plans) am not able to create for Master recipes.
    Kindly suggest me how to proceed on.
    If i go for LSMW option i am having the following issue.
    One recipe group will have this MIC in operation 70 and the other recipe group will have this MIC in operation 80. Then how can be address this issue in LSMW, will it be possible through recording method?
    Provide your valuable inputs.
    Thanks and Regards
    Hari

Maybe you are looking for