Error message with export pdf

logged into export from pdf get message " an error occured while signing in "

I WAS TRYING TO ACCESS THE SERVICE FROM WITHIN  ADOBE READER .
I WAS ACCESSING THE SERVICE FROM THE PDF I HAD ON MY SCREEN .
THE Adobe ExportPDF SITE WORKS GREAT !
THANKS
TED
<contact information removed by moderator>
Message was edited by: David Kastendick

Similar Messages

  • ICC error Message when Exporting PDF

    I hope someone can answer this for me, I searched the web and could not find anything like this. The Newspaper I work for had their Ink supplier create a custom ICC profile for their press. I set up Indesign to use the profile in the color settings as well as when exporting to PDF. Now when I export I get a error message stating "Version 4 ICC Profiles will be converted to Version 2 ICC profiles during PDF Export" most of the time the color on the pdfs come out fine, but there have been a few where the color changes/shifts. Does anyone know why this message appears and is there a way to fix it? I will be doing alot of testing to see if I can get the message to not come up.
    Thanks
    -Dustin Bell

    I'm not sure you'll find exactly the answer you are looking for, but there's a lot of information accessible through this search:
    http://www.google.com/search?q=%22icc+profiles%22+%22version+4%22
    It's some sort of incompatibility issue with the new standard.
    Peter

  • An error message when exporting pdf to word

    there is an error message when I try to convert a pdf into word. please advise

    What error message did you receive?

  • Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

    Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
    Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
    Uninstalled Acrobat 9, reinstalled, still same problem.
    Help please!

    Yes I can it only happens in the browser..
    I reinstalled Windows on my machine and started over a couple of weeks ago.
    When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
    I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
    Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
    Ever since then I get the error when something is downloaded and opened in the browser.
    Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
    Not sure what to do..

  • I receive error message when exporting or converting pdf to word

    i receive error message when exporting or converting pdf to word

    Me too and I cannot find online support of any kind. It was hard enough to get to find this forum. Is there a tech support chat or phone number anyone can provide? Thanks!

  • Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3

    Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3 Web Premium with Acrobat Professional 8.  I use it fine on my old computer with Windows XP.  I recently got a new laptop with Windows 7.  I installed all my Adobe programs, and I think they are working.  When I look at Adobe PDF in the device section of the Control Panel it looks okay.  But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens.  I have tried printing both as File>print and using the PDF tab on the top menu bar.  I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot.  I look at the document list and it says status "error".  When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print.  I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess).  I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work.  I think I successfully reinstalled using that dll file- no errors came up anyway.  But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice.  Help?

    I just compared the properties between the two computers.  On the old computer it has the port as "My Documents/*.pdf".  On my new computer it lists the port as "LPT1".  I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied".  I then tried to create a new port on the device control panel.  I tried to create a local port "My Documents/*.pdf" port but was denied.  I ten tried to create a new port type and control panel asked for an INF file.  I wonder if this is where my problem lies.  Thoughts?

  • Error Message with multiple line

    Hi
    How to display a error message with multiple line?
    Example
         Goods movement not possible for material 101
         Goods movement not possible for material 102
         Goods movement not possible for material 103
    is it possible is ABAP? If so please advice me.
    Best Regards
    Asheek

    Hi Anoop,
    You can use same thing like this
    I suggest write ur message through this.
    First set the obecj.
    CALL FUNCTION 'APPL_LOG_SET_OBJECT'
    for local memory
    FUNCTION 'APPL_LOG_WRITE_MESSAGES'
             EXPORTING
                  OBJECT              = OBJECT
                  SUBOBJECT           = SUBOBJECT
                  UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
             TABLES
                  MESSAGES            = MESSAGE_TABLE
             EXCEPTIONS
                  OBJECT_NOT_FOUND    = 1
                  SUBOBJECT_NOT_FOUND = 2
                  OTHERS              = 3.
    the call for physical memory
    CALL FUNCTION 'APPL_LOG_WRITE_DB'
    In this process you only need to provide the Itab with error messages.
    Reg,
    Arpit

  • Error message when exporting

    keep getting error message when exporting 12 min project from premier pro ,
    never had this problem.
    Adobe tech used remote access to assist me with something and changed settings etc.

    WHAT error message?
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Raid 1 error message with ASC: 0x11, ASCQ: 0x0, FRU: 0xf

    Dear All,
    There is a error message with ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU: 0xf
    And I reference the documentation at http://docs.oracle.com/cd/E19105-01/storedge.6320/817-5918-10/817-5918-10.pdf The error messages means:
    "The RAID controller firmware, during a normal read or volumes verification operation, corrects the bad sector on the drive by reconstructing the
    data (assuming a RAID 1+0 or RAID 5 configuration) and writing it back to the drive. The drive, in turn, writes the data to a spare sector.
    Ensure that the volume is scrubbed on a regular basis. If the volumes in the RAID device are configured as RAID 0,
    then the data is lost and drive replacement is required."
    But I am not understand if the harddisk in RAID 1. Is that the harddisk with problem will write the data to a spare sector but the other mirrored
    harddisk will not write to the spared block due to mirroring or they both write the data in the bad block to the spared block?
    If the data in the bad block moved to the spare sector in both mirrored harddisks.
    Is that the whole mirrored group will reuse the bad sector again after replacement?
    If the Mirror is built up by Veritas not the Solaris Volume Manager. Is there any difference?
    Thank You!
    Edited by: 960831 on 2012/9/23 下午 9:03
    Edited by: 960831 on 2012/9/23 下午 9:04

    It appears that SCSI disk #178, in an external array, has a bad data block
    and that the specific data block is #7564160. That data block
    additionally translates into sector #7560064 of LUN#1.
    Your computer system is finding it difficult to read whatever is in that part of the drive.
    Repair that disk by marking the block as unusable,
    or you can just replace the disk and rebuild the LUN.
    I've never had to do that, personally.
    That's what service contracts are for. The vendor does it for me.
    It seems that it is time for you to open a service case with the array vendor.

  • I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

    Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
    (When you replaced the Hardisk, you should also replace the battery.)
    Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
    You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
    Have a nice day!

  • Error message with hyperlink

    Hi Champs,
    I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
    We are using SRM 4.0 Version.
    I need to display the below error message with a hyperlink to a particular site:
    Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
    Is it possible to have hyperlink with an error message.
    Thanks
    Regards,
    Nishant

    Hello
    It is no possible.
    But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
    In this case hyperlink will be available after double click on error icon in left bottom corner.
    PS: and not duplicate posts.

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

    My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
    That's why i am interested on anyone's help.

    Welcome to the Apple Support Communities
    I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
    If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

  • Displaying an error message with a link to the error field

    By default, ADF validation usually displays an alert with an error message and a link to the error field.
    I have some custom validations where I finally display the error message with this:
      public static void MessageError(String messageText){
        //String messageText="No se han encontrado estos datos";
        FacesMessage fm = new FacesMessage(messageText);
         * set the type of the message.
         * Valid types: error, fatal,info,warning
        fm.setSeverity(FacesMessage.SEVERITY_ERROR);
        FacesContext context = FacesContext.getCurrentInstance();
        context.addMessage(null, fm);
    My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
    Is there any way to get this ?

    Can't you include this in your message?
    You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
    Timo

  • HT4910 My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    My iCal has frozen after I tried to paste info from an email into a reminder.  I get a "server reports an error" message with what I tried to paste in the box.  Calendar is frozen and will only close by forcing it.  Any help?

    Did another window open with the pasted information?  If so, try hitting "enter/return" key and "delete" key at the same time.  That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

Maybe you are looking for