Error reading memory - W3WP.exe after running rpt

We have a few reports that are causing memory errors to occur. This is under Windows Server 2003 using CR 2008. The reports are exported from a Windows application to .rpt files. These are then displayed using the Report Viewer from a .Net web app. Most of the reports we generate run fine but there are about 6 that are causing these errors. The problem .rpts do display fine when viewing the report using the VS CR designer.
The scenario for report 'X' is that I can display a number or reports without a problem and the first time I display report 'X' it also is correct. The next report I attempt to display after report 'X' pops up the error on W3WP.exe...The instruction at "0x7c81bb72" referenced memory at "0x30303030". The memory could not be "read". The event log after this shows...
Faulting application w3wp.exe, version 6.0.3790.3959, faulting module ntdll.dll, version 5.2.3790.4789, fault address 0x0002bac2.
I have tried a number of combinations for displaying reports but the error always occurs after running report 'X'. As a side note the same reports causing these problems have also been tested in CR2010 on Windows Server 2008 - 64 bit and they also have problems there. In that case we are getting the Event ID 4353 - KeycodeDecoder.dll error in the event log which I have seen in other posts.
Any ideas on what to look for in the problem reports? What other info can I supply?
Thank you.
- David

What CR Service pack are you on? You should be on SP3:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
Do you see the issue on your dev computer or after you deploy?
Create a new simple web app;
viewer
code; CrystalReportViewer1.Reportsource = <path to report"
Does the test app reproduce the issue? If it does, would you be able to share the report?
- Ludek

Similar Messages

SharePoint 2010 100% cpu w3wp.exe after windows server update desember 2013

Hi
Using SharePoint 2010 with 2 frontend webservers and 1 appserver:
Our ApplicationPool for our portal workerprocess has for a second time gone up to and stuck on 99% CPU on one of our 2 frontend webservers.
What happens is that this server falls out of the NLB cluster, and the only way to get it back is to log onto the server and through task manager stop the worker process (w3wp). We checked to see what the applicationPool was, and it was for the portal site.
The first time it happened was just after the installation of the following windows server patches: Actuall on the very same day. The patches were installed on the early morning of the 18th december 2013.
The event id for the spesific events show:
18.12.2013 14:45 Event id 7011, Service Control manager:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service.
and
09.01.2014 08:36 Event id 7011 Service Control Manager
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
In adition there are a lot of random:
Event id 105, Warning: NLB:
NLB cluster []: Timer starvation has been detected. This might be due to a denial of service attack or a very high server load. During this period, some connections might fail. If this problem recurs frequently, analyze the threat and take appropriate measures
and/or add more servers to the cluster. An informational event log entry will be logged when the attack has subsided.
I'm suspecting that this was caused because of one of the updates, allthough the "Event id 105", Warning: NLB did exist prior to the patch updates, but would only appear once every 2-3 weeks. After December 18 2013 these "Event id 105"
messages appear about 6-11 times a day!
any one seen something like it?
I see microsoft: http://support.microsoft.com/kb/922918/eng
Event 7011, has a workaround to increase the default time-out value for the service to for example 60 seconds instead of 30. Would this be a good solution?
brgs
Bjorn

Hi ,
For the temp solution u can do app pool recycle or iisreset when the cpu usage goes 100%.
And check which worker processor is consuming that much memory and checked related to that web application.
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful. It'll help other users who are visiting your thread for the similar problem.

After running ridc to checkin file into Oracle Content Center Server there is error: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line

Hi,
   I use ridc to check in file into Oracle Center Content server. There is no problem at the beginning. But after running for several days, there is following error.
I must restart my program to solve this issue.
   Can anyone help me solve this problem?
Thanks,
Tony
2013-07-11 12:24:31,189 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
        at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
        at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
        at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
        at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
        ... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
        ... 19 more
2013-07-11 12:24:33,005 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
        at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
        at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
        at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
        at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
        ... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
        ... 19 more
2013-07-11 12:24:37,870 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
        at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
        at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
        at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
        at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
        ... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
        ... 19 more
2013-07-11 12:24:39,722 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
        at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
        at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
        at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
        at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
        at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
        at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
        ... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
        at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
        at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
        ... 19 more

The following is my testing code.
package ebilling;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.security.SecureRandom;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.List;
import java.util.Properties;
import java.util.concurrent.LinkedBlockingQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
import oracle.stellent.ridc.IdcClient;
import oracle.stellent.ridc.IdcClientManager;
import oracle.stellent.ridc.IdcContext;
import oracle.stellent.ridc.model.DataBinder;
import oracle.stellent.ridc.model.DataObject;
import oracle.stellent.ridc.model.DataResultSet;
import oracle.stellent.ridc.model.TransferFile;
import oracle.stellent.ridc.protocol.ServiceResponse;
import org.apache.commons.lang.StringUtils;
public class UCMContentManager {
     * Check in a file into a Oracle WebCenter Content Server and return content id of uploaded content item in Oracle WebCenter Content Server.
     * @param properties        The Oracle WebCenter Content Server connection properties.
     * @param contentFile       This file will be checked in a Oracle WebCenter Content Server.
     * @param path              The location path of checked in file in Oracle WebCenter Content Server. This path includes the file name.<br>
     *                             For example, "/folder1/folder2/file1.txt". The "file1.txt" is the file name part. <br>
     *                             The file name will be used as dDocName in Oracle WebCenter Server. It must be unique.<br>
     * @throws ContentException The exception when uploading file into Oracle WebCenter Content Server.
     * @return                  The content id of uploaded content item in Oracle WebCenter Content Server.
    public String saveContent(Properties properties, File contentFile, String path) throws ContentException{
        if(path.endsWith(SLASH)) {
            throw new ContentException("Require file name in Content Management Server");
        if(!path.startsWith(SLASH)) {
            throw new ContentException("The file store path in Content Management Server should be absolute.");
        if (path.indexOf("//") != -1) {
            path = path.replace("//", SLASH);
        String[] paths = path.split(SLASH);
        String[] parents = new String[paths.length - 1];
        String itemName = paths[paths.length-1];
        System.arraycopy(paths, 0, parents, 0, paths.length-1);
        ServiceResponse response = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            //create the parent folders if they don't exist
            String folderGUID = makeFolders(properties, parents);
            //check in the file
            DataBinder requestData = client.createBinder();
            requestData.putLocal("IdcService", "CHECKIN_UNIVERSAL");
            requestData.putLocal("IsJava", "1");
            requestData.putLocal("dDocName", itemName);
            requestData.putLocal("dDocTitle", itemName);
            requestData.putLocal("dDocType", "Binary");
            requestData.putLocal("dSecurityGroup", "Public");
            requestData.addFile("primaryFile", new TransferFile(contentFile));
            response = client.sendRequest(connectionContext, requestData);
            DataBinder responseData = response.getResponseAsBinder();
            //String did = responseData.getLocal("dID");
            String dDocname = responseData.getLocal("dDocName");
            closeResponse(response);
            //link the file in a folder
            requestData = client.createBinder();
            requestData.putLocal("IdcService", "FLD_CREATE_FILE");
            requestData.putLocal("fParentGUID", folderGUID);
            String fileType = "owner";
            requestData.putLocal("fFileType", fileType);
            requestData.putLocal("dDocName", dDocname);
            response = client.sendRequest(connectionContext, requestData);
            return dDocname;
        } catch (Throwable e) {
            throw new ContentException(e);
        } finally{
            closeResponse(response);
    public void deleteContent(Properties properties, String contentId) throws ContentException{
        List<String> didList = getDIds(properties, contentId);
        contentId = contentId.toUpperCase();
        ServiceResponse    response = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            DataBinder requestData = null;
            for(int i=0; i<didList.size(); i++) {
                String did = didList.get(i);
                requestData = client.createBinder();
                requestData.putLocal("IdcService", "DELETE_DOC");
                requestData.putLocal("dDocName", contentId);
                requestData.putLocal("dID", did);
                response = client.sendRequest(connectionContext, requestData);
                closeResponse(response);
                //delete parent folder
//                try {
//                    requestData = client.createBinder();
//                    requestData.putLocal("IdcService", "FLD_DELETE");
//                    requestData.putLocal("item1", "path:" + parentPath);
//                    requestData.putLocal("constructDialog", "1");
//                    response = client.sendRequest(connectionContext, requestData);
//                } catch (Exception e) {
//                    // TODO: handle exception
        } catch (Exception e) {
            throw new ContentException(e);
        } finally {
            closeResponse(response);
    public int getFileCountInFolder(Properties properties, String path) throws ContentException{
        ServiceResponse    response = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            DataBinder binder = client.createBinder();
            binder.putLocal("IdcService", "FLD_BROWSE");
            binder.putLocal("path", path);
            response = client.sendRequest(connectionContext, binder);
            DataBinder result = response.getResponseAsBinder();
            String num = result.getLocal("numFiles");
            return Integer.parseInt(num);
        catch (Exception e) {
            throw new ContentException(e);
        } finally {
            closeResponse(response);
    private String getFolderGUID(Properties properties, String path) throws ContentException {
        ServiceResponse    response = null;
        String tmpFolderGUID = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            DataBinder requestData = client.createBinder();
            requestData.putLocal("IdcService", "FLD_INFO");
            requestData.putLocal("path", path);
            response = client.sendRequest(connectionContext,
                    requestData);
            DataResultSet result = response.getResponseAsBinder().getResultSet("FolderInfo");
            tmpFolderGUID = result.getRows().get(0).get("fFolderGUID")
                .toString();
            if(StringUtils.isBlank(tmpFolderGUID))
                tmpFolderGUID = null;
        } catch (Exception e) {
        } finally {
            closeResponse(response);
        return tmpFolderGUID;
    public boolean deleteFolder(Properties properties, String path) throws ContentException {
        if(getFolderGUID(properties, path)==null)
            return false;
        int fileCount = getFileCountInFolder(properties, path);
        ServiceResponse    response = null;
        if(fileCount==0) {
            try {
                IdcClientManager manager = new IdcClientManager();
                IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
                client.getConfig().setProperty ("http.library", "apache4");
                String user = properties.getProperty(USERNAME_PROPERTY);
                String pwd = properties.getProperty(PASSWORD_PROPERTY);
                IdcContext connectionContext = new IdcContext(user, pwd);
                pwd = null;
                DataBinder binder = client.createBinder();
                binder.putLocal("IdcService", "FLD_DELETE");
                binder.putLocal("item1", "path:" + path);
                binder.putLocal("constructDialog", "1");
                response = client.sendRequest(connectionContext, binder);
                return true;
            catch (Exception e) {
                throw new ContentException(e);
            } finally {
                closeResponse(response);
        } else {
            return false;
    private String buildPath(String[] arr, int i) {
        StringBuilder buf = new StringBuilder();
        for(int j=0; j<=i; j++) {
            buf.append(arr[j]);
            buf.append(SLASH);
        return buf.toString();
    private String makeFolders(Properties properties, String[] paths) throws ContentException{
        String folderGUID = "";
        ServiceResponse response = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            String parentFolderGUID = null;
            for(int i=0; i<paths.length; i++) {
                String fullPath = buildPath(paths, i);
                DataBinder requestData = null;
                parentFolderGUID = folderGUID;
                folderGUID = getFolderGUID(properties, fullPath);
                boolean exists = folderGUID!=null;
                DataResultSet result = null;
                if(!exists) {
                    //create new folder
                    try {
                        requestData = client.createBinder();
                        requestData.putLocal("IdcService", "FLD_CREATE_FOLDER");
                        requestData.putLocal("fParentGUID", parentFolderGUID);
                        requestData.putLocal("fFolderName", paths[i]);
                        response = client.sendRequest(connectionContext, requestData);
                    } finally {
                        closeResponse(response);
                    //retrieve folderGUID of new folder
                    folderGUID = getFolderGUID(properties, fullPath);
        } catch (Throwable e) {
            throw new ContentException(e);
        } finally{
            closeResponse(response);
        return folderGUID;
    public List<String> getDIds(Properties properties, String contentId) throws ContentException{
        contentId = contentId.toUpperCase();
        List<String> didList = new ArrayList<String>();
        ServiceResponse    response = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            DataBinder requestData = null;
            requestData = client.createBinder();
            requestData.putLocal("IdcService", "GET_SEARCH_RESULTS");
            requestData.putLocal("SortField", "dInDate");
            requestData.putLocal("SortType", "DESC");
            requestData.putLocal("QueryText", "dDocName <matches> `" + contentId +"`");
            response = client.sendRequest(connectionContext, requestData);
            DataBinder result = response.getResponseAsBinder();
            DataResultSet resultSet = result.getResultSet("SearchResults");
            for (DataObject dataObject : resultSet.getRows()) {
//                System.out.println("ID : " + dataObject.get("dID")+" dDocName : "
//                        + dataObject.get("dDocName") + " Title : " + dataObject.get("dDocTitle")
//                        + " Author : " + dataObject.get("dDocAuthor") + " Security Group : "
//                        + dataObject.get("dSecurityGroup"));
                String did = dataObject.get("dID");
                didList.add(did);
                //break;
        } catch (Exception e) {
            throw new ContentException(e);
        } finally{
            closeResponse(response);
        return didList;
     * Get the file content represented by contentId from a Oracle WebCenter Content Server.
     * The return value is the input stream of retrieved file content.
     * @param properties        The Oracle WebCenter Content Server connection properties.
     * @param contentId         The Content ID for the content item in Oracle WebCenter Content Server.
     * @throws ContentException The exception when retrieving content from Oracle WebCenter Content Server.
     * @return                  The input stream of retrieved file content.
    public InputStream retrieveContent(Properties properties, String contentId) throws ContentException{
        try {
            return new FileInputStream(retrieveContentFile(properties, contentId));
        } catch (Throwable e) {
            throw new ContentException(e);
    public File retrieveContentFile(Properties properties, String contentId) throws ContentException {
        contentId = contentId.toUpperCase();
        ServiceResponse response = null;
        try {
            IdcClientManager manager = new IdcClientManager();
            IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
            client.getConfig().setProperty ("http.library", "apache4");
            String user = properties.getProperty(USERNAME_PROPERTY);
            String pwd = properties.getProperty(PASSWORD_PROPERTY);
            IdcContext connectionContext = new IdcContext(user, pwd);
            pwd = null;
            DataBinder binder = client.createBinder();
            binder.putLocal("IdcService", "GET_FILE");
            //binder.putLocal("dID", dID);
            binder.putLocal("dDocName", contentId);
            binder.putLocal("RevisionSelectionMethod", "Latest");
            response = client.sendRequest(connectionContext, binder);
            InputStream in = null;
            OutputStream out = null;
            String edxhome = System.getProperty("edx.home");
            File tmpParent = new File(edxhome);
            tmpParent = new File(tmpParent, "Output");
            tmpParent = new File(tmpParent, "tmp");
            tmpParent.mkdirs();
            File tmpFile = File.createTempFile("down_", "_ucm", tmpParent);
            tmpFile.deleteOnExit();
            try {
                in = response.getResponseStream();
                out = new FileOutputStream(tmpFile);
                byte[] buf = new byte[1024];
                int read = -1;
                while((read = in.read(buf))!=-1) {
                    out.write(buf, 0, read);
            } finally{
                try {
                    if(in!=null)
                        in.close();
                } catch (Exception e2) {
                try {
                    if(out!=null)
                        out.close();
                } catch (Exception e2) {
            return tmpFile;
        } catch (Throwable e) {
            throw new ContentException(e);
        } finally{
            closeResponse(response);
    private void closeResponse(ServiceResponse response) {
        if(response!=null) {
            try {
                response.close();
            } catch (Exception e) {
    private static final String SLASH = "/";
    private static final String URL_PROPERTY = "contentServerURL";
    private static final String USERNAME_PROPERTY = "contentServerUser";
    private static final String PASSWORD_PROPERTY = "contentServerPassword";
    static volatile boolean flag = false;
    static class UploadTask implements Runnable{
        public void run() {
            try {
                while(!flag) {
                    UCMContentManager manager = new UCMContentManager();
                    Properties properties = new Properties();
                    properties.put(URL_PROPERTY, "https://slc402124:16201/cs/idcplg");
                    properties.put(USERNAME_PROPERTY, "weblogic");
                    properties.put(PASSWORD_PROPERTY, "weblogic1");
                    File contentFile = new File("C:/toding/mypro/UCM/test.txt");
                    String parentPath = "/new/test/multiThreadUpload/";
                    String location = makePath(parentPath);
                    manager.saveContent(properties, contentFile, location);
                    System.out.println(location);
                    Thread.sleep(5000);
            } catch (Exception e) {
                e.printStackTrace();
                flag = true;
    public static void main(String[] args) throws Exception{
        ThreadPoolExecutor executor = new ThreadPoolExecutor(10, 10, 60, TimeUnit.SECONDS,
                 new LinkedBlockingQueue<Runnable>());
        for(int i=0; i<10; i++) {
             UploadTask uploadTask = new UploadTask();
             executor.execute(uploadTask);
        while(!flag) {
            Thread.sleep(5000);
        executor.shutdown();
    public static String makePath(String parentPath) {
        StringBuilder buf = new StringBuilder();
        buf.append(parentPath);
        if(!parentPath.endsWith("/")) {
            buf.append("/");
        Calendar rightNow = Calendar.getInstance();
        String pattern = "yyyyMMdd";
        SimpleDateFormat simDateForm = new SimpleDateFormat(pattern);
        String dateStr = simDateForm.format((rightNow).getTime());
        pattern = "HHmmssSSS";
        simDateForm = new SimpleDateFormat(pattern);
        String timeStr = simDateForm.format((rightNow).getTime());
        buf.append(dateStr);
        buf.append("/");
        buf.append(timeStr);
        buf.append("_");
        buf.append(random.nextInt(10000));
        String finalLocation = buf.toString();
        return finalLocation;
    private static SecureRandom random = new SecureRandom();

Read Error logs after running the background jobs

Hi,
How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
Kindly suggest.
Thanks & Regards,
N. Laxman

Hi
you can check the back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
plz check in your case and revert back
Regards
Anupam Sharma

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ?

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72

Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

Application Error: "The memory could not be 'read'."

I am programming an application in C#.
I am using an Acrobat Reader control on my form to display PDFs within my program.
I have tried a couple of different configurations with the form control. I have drag-and-dropped the control prior to runtime. I have also tried to add the control dynamically.
When I run the program, then activate the control and close the form, I get the following error.
"sw:name.exe - Application Error; The instruction at "0x0700609c" referenced memory at "0x00000014". The memory could not be 'read'. Click on OK to terminate the program."
I have googled this error for hours now, and cannot find anything that truly explains this error and how to fix it.
Thank you for any help.

To who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.
It seems that, somehow, LabVIEW, and other programming tools, straggle with this version of Adobe (I assume that this is due to this bug) when closing the reference to Adobe created by the ActiveX container. So the solution would be closing "by hand" this reference, and telling Windows to free all the relation between the application (LabVIEW for us) and Adobe. The idea is that when we've done with the VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:
- process all the Windows messages currently in the message queue (.NET: System.Windows.Form.Application -> DoEvents
- run CoFreeUnusedLibraries in "ole32.dll"
I hope this information can help somebody, as I wasted too much time to figure this out (finding eventually the answer in a forum of Adobe!)
P.S. For those who program in C# as well, check this link; this was my source.

Event 1000, Application Error (Faulting application name: w3wp.exe - Faulting module name: KERNELBASE.dll)

Hello Guys,
While running a web application am getting an error like: Remote server not responding. Below are the details of event viewers which been captured at the same time when this error happened:
Event 1000, Application Error
Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb
Faulting module name: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1
Exception code: 0xe053534f
Fault offset: 0x000000000000a88d
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
Event 1001, Windows Error Reporting
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: w3wp.exe
P2: 7.5.7600.16385
P3: 4a5bd0eb
P4: KERNELBASE.dll
P5: 6.1.7600.16850
P6: 4e211da1
P7: e053534f
P8: 000000000000a88d
P9:
P10:
Attached files:
C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WERC9CE.tmp.hdmp
C:\Windows\Temp\WEREE30.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0
Analysis symbol:
Rechecking for solution: 0
Report Id: d46a6849-8f6a-11e1-98af-00215e6e4855
Report Status: 4
This is an priority issue which we are facing in IIS. IIS is configured for Framework 2.0 and underlying OS is - Windows
Server 2008 R2 Standard.This issue is replicable and occurring frequently Please suggest how to resolve it. Any input related to above issue is appreciable.

Please refer similar discussions and see if they help
Faulting application name: w3wp.exe
http://telligent.com/support/communityserver/community_server_2008/f/288/t/1067447.aspx
Event ID: 1000, Faulting application w3wp.exe, faulting module unknown,
http://social.msdn.microsoft.com/forums/en-US/clr/thread/9be88a2f-c8cc-4a73-9371-45ab73982123
For IIS related queries, please post them in IIS forum - http://forums.iis.net/
A UNIVERSE without WINDOWS is CHAOS !
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
About Me !!!

Error: Read failure when running any of self diagnostisc tests from BIOS

After Screen replacement my HP625 Laptop seems to work good as ever, but if running any of diagnostic test from BIOS (Memory, Start Up, Run In or Hard Drive Test) it throws the same Error: Read failure?!?
Should I be worried?
is is something wrong with testing software?
kind regards

Hi Arturb,
Your HP 625 is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

Hello,
I was able to reproduce the following problem on a T400.
- unattended installation of WXP-SP3 (slipstreamed)
- reboot
- install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
- reboot
At this point, the video driver is well configured.
- Reboot once or twice, video driver still good.
- Boot the T400 on WinPE 2.0
- Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
- Shutdown the T400, and reboot on C:\
- At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
Then I get an ATI error telling the driver is missing or not well installed.
- When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
(without re-installing the driver ...)
Anyone has an explanation ?
Please not I did not run "sysprep.exe" before capturing with ImageX.exe
stefan

Update on this problem.
After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
After rebooting the T400, the ATI driver was fine.
Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
Stefan

When i open reader two AcroRd32.exe*32 processes open and never close even after exiting the reader.

when i open reader two AcroRd32.exe*32 processes open and do not close after closing the reader. i have seen 10 AcroRd31.exe*32 processes open. do I have an undetectable virus or is the software just poorly written and tested. I am running Windows 7 premium that is fully up to date and the reader is up to date also. i have even deleted reader and reinstalled it.
All 8 Processors activity jumps really high while AcroRd.exe*32 is running with no pdf documents open and as soon as i end the processes the processor activity goes down to near 0 according to the performance tab in task manager. My fan also kicks on because of all the heat from the processor.

open acrord32.exe and go to edit, preferences, internet, and then uncheck "Allow fast web view" and "allow speculative downloading in the background". This will save your processor and keep your system from locking up from all of the acrord32.exe processes running.

Error after running Projector for a while

I run a projector in a kiosk. When being used there is no
problem, but at night if it is not being used for a bit I get one
of two errors
Faulting application dirproj.exe, version 10.1.0.11, faulting
module iml32.dll, version 10.1.0.11, fault address 0x000113d7.
Faulting application dirproj.exe, version 10.1.0.11, faulting
module iml32.dll, version 10.1.0.11, fault address 0x0000be06
These happen at various times and doesn't seem to be a
pattern for when it is one or the other. Any help is appreciated

You would need to make another application to monitor the
status of the
main one. Xtras like BuddyAPI will help there. It is easy to
check if
an app is open, and if not, open it.
Or you could have the main app write out a file every 5
minutes or so.
Have your monitoring application check the file date on that
file. If
it is >10 old, then that means that the main app is locked
up or
crashed. The monitor app can close it then re=open it.

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

Oracle 9i export error after running catexp.sql file

After running catexp.sql file in oracle 9i 9.2.0.7.0 as system user,it gives the following error while logging
ORA-04020: deadlock detected while trying to lock object SYS.DBMS_STANDARD
please help me..............

"catexp.sql" is to be run by SYS AS SYSDBA.
You'd have to cleanup any extra objects that you created in the SYSTEM account.
Why did you think that you needed to run "catexp.sql" ? Are you exporting using 9i exp against a 10g database or against a 9i database ?

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057)) After DPM 2012 SP1 to R2 Upgrade

Hi,
We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.
Now in File Protection Group, we receive error
"An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".
This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.
We tried,
Deleted entire protection group and recreated ,
Ran consistency job 2 to 3 times.
Ran Synchronize with consistency check.
But every time It failed. Before upgrade it was working fine.
Thanks

Hi
I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057)
issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here
http://support.microsoft.com/kb/2904687/en-us
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your
question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

To run an application on iAS6sp1 on HP-Unix, while starting the kjs from command line, it gives a GDS error and crashes. Subsequently, after stopping all services and restarting iAS wouldnot come up.

Hi,
Not a problem, please post the KJS error logs for me to hunt the
exact reason for the error.
Thanks & Regards
Raj
Neel John wrote:
To run an application on iAS6sp1 on HP-Unix, while starting the kjs
from command line, it gives a GDS error and crashes. Subsequently,
after stopping all services and restarting iAS wouldnot come up.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Error reading memory - W3WP.exe after running rpt

Similar Messages

Maybe you are looking for