Error after running Projector for a while

I run a projector in a kiosk. When being used there is no
problem, but at night if it is not being used for a bit I get one
of two errors
Faulting application dirproj.exe, version 10.1.0.11, faulting
module iml32.dll, version 10.1.0.11, fault address 0x000113d7.
Faulting application dirproj.exe, version 10.1.0.11, faulting
module iml32.dll, version 10.1.0.11, fault address 0x0000be06
These happen at various times and doesn't seem to be a
pattern for when it is one or the other. Any help is appreciated

You would need to make another application to monitor the
status of the
main one. Xtras like BuddyAPI will help there. It is easy to
check if
an app is open, and if not, open it.
Or you could have the main app write out a file every 5
minutes or so.
Have your monitoring application check the file date on that
file. If
it is >10 old, then that means that the main app is locked
up or
crashed. The monitor app can close it then re=open it.

Similar Messages

  • ABAP Program gives error after running  successfully for few days / months

    I have a problem that sometimes my programs start giving errors or does not run at all after successfully running for few days / months.
    But, when I copy the same program with a different name (without any changes ) it starts running again.
    Yesterday I had another problem. I was sending a request to be transported to Production Client, and the request was not getting transported. But when I changed just the name of the program, It was transported to Production Client.
    I can't understand where the problem lies and what happens to the programs after running successfully for few days. All I have to do is just copy that programm into another name and it starts running.
    Can anyone help me?
    Regards,
    SK Daniel

    about the transport thing..i had the same problem few months back the reason was,  i included a table which is having different package  from my program..so wot im thinking is when you creating a different program u might be assigning different package to this new program  and this package is same as all the tables included in your program...
    regards

  • VISA Write hangs after running OK for a while

    VISA Write function (VISA abc W) in my VI runs OK, with a Return Count of 4, for a while (100's to 1000's of times)  then it hangs.  The Return Count from this function is then 0.  The Error In and Error Out show no errors.  Clicking HIGHLIGHT EXECUTION shows the output wires from the VISA Write as colored grey, while everything else has normal color. 
    Clicking the VI red ABORT button, or any of the sub VIs red ABORT buttons, fails to abort or reset the VI even after 20 minutes.  Task Manager will stop LabVIEW, but then LabVIEW will not start up again without shutting down and restarting the computer.  Changing to a different Windows XP computer and a different PCI-GPIB, NI-488.2  board, as well as reinstalling LabVIEW 7.0, or using a different LabVIEW 7.0 serial number, has not solved the problem. 
    Thank you for your help.

    Thanks for your reply.  Attached is a PowerPoint file that shows info on our computer and LabView, and a For Loop
    (Slide 3) that runs the VIs addressing one of our instruments (Hart 1590 Super Thermometer).  Slide 4 shows the
    block diagram that is pretty much as downloaded from National Instruments.  The block diagrams for each of the
    colored sub VIs contains a sub VI having a VISA abc W function as shown in Slide 5.  The only places this VISA
    function hangs is in inside the While Loop, inside the yellow Meas. Status. VI or the blue Read Meas. VI.  The
    Meas. Status. VI sends "new", and  the Read Meas. VI sends "tem" to the Hart instrument. 
    Also attaced are the VIs for the Measurement Status and the Read Measurement.  In the course of trying to fix this
    problem I've added various time delays of 50, 100 msec, up to 1 sec, thinking that the Hart needed more time to
    respond before receiving another command; none of this improved the situation.  I added indicators and arrays to
    capture the last several strings that were input to the VISA function, but I saw nothing unusual.  All I've been
    able to determine is that the VISA abc W function hangs as described in my posted message. 
    Attachments:
    VISA Write Hang 9-15-05.zip ‏282 KB

  • Airport Express becomes unstable after running Azureus for a while

    I have bought a new Airport Express yesterday, and it worked great. But then I let Azureus run overnight, and this morning I wanted to surf the web, but some pages took forever to load. I thought it was Azureus taking all the bandwidth, so I quit it, but the problems persisted:
    The problem is that in Safari/Firefox/whatever, 1 out of 4 or perhaps 1 out of 6 pages I open just take forever to load, even when these are pages from the same server. So it's definitely not a problem with my internet connection (which is 2Mbps over cable, BTW). Stopping the loading of the page and hitting the reload button then opens the page just fine.
    It seems that the Airport Express has some kind of minor crash, so that it won't lock up completely but will not load a page once in a while (and this while is sometimes 5 seconds and not just every 10 minutes).
    The other Mac in my house gets these problems too, so the problem lies not with my Mac, but with the Airport Express.
    Restarting the Airport Express resolves this problem, and all the pages will load just fine. I reproduced this behaviour about 4 times today, just a short while of running Azureus "crashes" the Airport Express again.
    What's the problem here and how do I resolve it?
    Thanks,
    Oliver
    PS: excuse me for my not-perfect english

    hi there!
    i had the same problem. the thing is that i used a repeater in my house in order to catch the original signal in other parts of the house.
    it now seems that the repeater was the reason for the drop outs.
    in the meantime i use the power outlets to distribute the signal (e.g. http://www.zdnet.com/blog/gadgetreviews/d-link-turns-every-power-outlet-into-wal l-to-wall-network/3287) and i connect the airport straight to the power outlet with an ethernet cable.
    since i use this method i do not have any drop outs anymore.
    hope this helps.
    cheers.

  • I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
    Thanks in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated 19 September 2014 08:07:14 GMT+8
    Hardware Information: ?
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
    Disk Information: ?
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    Launch Agents: ?
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [running] com.sophos.uiserver.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.music.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      iTunesHelper
      TomTomHOMERunner
      AdobeResourceSynchronizer
      Dropbox
    Internet Plug-ins: ?
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ?
      Ultimate
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Perian  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 99
      Oldest backup: 2012-04-20 17:05:32 +0000
      Last backup: 2014-09-18 23:49:25 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          6% InterCheck
          5% iCalExternalSync
          3% WindowServer
          2% CalendarAgent
          2% SystemUIServer
    Top Processes by Memory: ?
      152 MB SophosScanD
      147 MB InterCheck
      106 MB SophosAntiVirus
      66 MB Dropbox
      57 MB com.apple.iTunesLibraryService
    Virtual Memory Information: ?
      161 MB Free RAM
      1.55 GB Active RAM
      1.41 GB Inactive RAM
      902 MB Wired RAM
      611 MB Page-ins
      0 B Page-outs

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • Hi. I am running Windows 8.1 on a  64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK  for a while, but then suddenly it won't work. I uni

    Hi. I am running Windows 8.1 on a  64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK  for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?

    I think you'd be much better off asking in the Acrobar forum, Acrobat

  • My Macbook turns off randomly after being on for a while and usually occurs when streaming video on netflix or something. I think it is overheating. Any thoughts?

    My Macbook turns off randomly after being on for a while and usually occurs when streaming video on netflix or something. I think it is overheating. Any thoughts?

    You might be right about the reheating. Get iStat Pro https://www.apple.com/downloads/dashboard/status/istatpro.html
    To monitor your tems and fan speeds.

  • Error 10846 after running VI for a day

    I am trying to develop a program that acquires data continuously from 9 analog input channels, then processed the data to extract the mean, max, min for each signal and do some calculation and then store the data in a spreadsheet every minute. The VI works fine if I run it for a short time (less than 5 hours) but if I tried to run it for a long period (an all day), I get an AI error 10846. If I ignored the message error and keep running the program, the error message 10846 keeps appearing and every thing in the VI seems slowing down. If I restart the VI without restarting the computer, the VI will run but the same message error 10846 will reappear after a short time. So I have finally had to stop the program and restart the co
    mputer so that the VI reruns normally. The VI is running at a scan rate = 1000 scans and a scan to read = 2000 scans, the buffer size is set up to 20000 scans. I tried to increase the buffer size up to 100000 scans and increase the scan to read up to 10000 scans but the message error keeps appearing. If I look at my scan backlog, for the first couple hours, it is equal to 0 and after that, for no reason, once in a while, the scan backlog show a value different of 0.
    I do not have really a lot of experiment with Data acquisition system and I am not sure to use the correct values of those parameters. But at the same time, I do not understand why the VI is running fine for couple hours and then crashed.
    Concerning the system that I am using, my computer is a 1 GHz Duron Processor running Windows 98 with 120 MB of RAM and I used:
    NI software = LabView version 6.1
    DAQ card = PCI-6071E
    I attached my code for the ones who will have time to run it.
    If anyone can offer some wisdom on
    that it would be greatly appreciated.
    Thanks
    PS: I am also wondering if the problem could come of my computer or hardware I am using?
    Attachments:
    TAH_DAQ_050703.zip ‏749 KB

    Right off hand, I would say that the fact you have to restart the computer to recover is very odd indeed--and troubling. Have you tried to run any of the continuous acquisition examples that ship with LV to see if they exhibit the same behaviour? Also, is the computer on a network? If so, try unplugging it and see if you still get the problem. Finally, when the thing is slowing down, what does the computer's overall CPU utilization look like?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Kernel_data_inpage_error & non-system disk error but everything running OK for a while

    Hi,
    can someone please help me out since I have a deadline in coming up and need my laptop to work properly!
    I have windows 7 64bit running on a HP ProBook 6550b. My PC runs fine for about an hour, after an hour the screen freezes for 10 seconds and then I get the KERNEL_DATA_INPAGE_ERROR. He reboots and then I get the message 'Non-system disk or disk error'
    Then I just shut down my PC and start it back up and everything works perfectly fine again for about 45 minutes. Then again the same problem.
    I have tried multiple things. I executed a chkdsk /f /r  This did find some problems. I tried and followed some instructions about changing the paging file settings. I ran a memtest. No errors with the memtest.
    Finally I went in the BIOS and I did a HP harddrive test. This one failed almost immediately but I can just close the BIOS and start my PC and windows runs fine.
    What can I do to resolve this problem other then buying a new harddrive. (I intend to buy a new laptop anyways in couple of months after I have passed my deadline and test period has finished. But for short term I really needs this to work.)
    Many thanks!!
     Johan 
    This question was solved.
    View Solution.

    Just in case someone else encouters this.
    The problem was due to my SSD M4 hard drive. There was a problem with the firmware causing hourly crashes after the disk has been in use for more then +-5200 hours. Upgrading the firmware fixed this for me.

  • Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

    So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
    Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

    Thank you for the tips!
    OGELTHORPE wrote:
    I would check to see if the WD HDD has its own Sudden Motion Sensor.  If so, it may be coming in conflict with the one in the Mac.  If that is the case, I suggest disabling the SMS in the Mac.
    WD5000BEVT does indeed have it's own protection:
    ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
    Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
    Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
    Melophage wrote:
    this could be indicative of a faulty internal SATA cable. /.../
    Reteep,
    you could try the same thing as well.
    In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

  • OIM: Error after running in patch_oimapp.sh

    Hi All,
    I have OIM11gR2 installed and I am trying to configure the LDAP Synch with OID via OVD. As per the documentation, after running the patch_oimapp.sh, I am getting below error:
    explode-archived-apps-was:
    seed-ootb-jobs:
    seed-ootb-jobs:
    +[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS+
    +*[java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver+*
    *+[java]* at java.net.URLClassLoader$1.run(URLClassLoader.java:202)+
    +[java] at java.security.AccessController.doPrivileged(Native Method)+
    +[java] at java.net.URLClassLoader.findClass(URLClassLoader.java:190)+
    +[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:306)+
    +[java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)+
    +[java] at java.lang.ClassLoader.loadClass(ClassLoader.java:247)+
    +[java] at java.lang.Class.forName0(Native Method)+
    +[java] at java.lang.Class.forName(Class.java:169)+
    +[java] at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:723)+
    +[java] at oracle.iam.scheduler.seed.SeedSchedulerData.main(SeedSchedulerData.java:111)+
    BUILD FAILED
    +/opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:+
    +/opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:+
    +/opt/oracle/Middleware/Oracle_IAM/server/seed_data/seed-rcu-data.xml:37: Java returned: 1+
    Total time: 44 seconds
    Below is my appserver.profile file:
    # Please fill the information below before running the post-patch script.
    # Put the OIM DB schema owner name here
    operationsDB.user=DEV_OIM
    # Put the DB driver to be used
    operationsDB.driver=oracle.jdbc.OracleDriver
    # Put the absolute path to the Weblogic/Websphere server directory here.
    appserver.dir=/opt/oracle/Middleware/wlserver_10.3
    # The host on which OIM db is running
    operationsDB.host=oracle
    # The service name of the OIM db [Do not mention the SID here.]
    operationsDB.serviceName=ORACLE11G
    # The port of the OIM db
    operationsDB.port=1521
    # Application server was or wls
    appserver.type=wls
    Any pointers what could be wrong?
    Regards,
    Sunny

    Hi Guys,
    Thanks for the reply.
    Copied the ojdbc6.jar in WLS_HOME/server/lib, OIM_HOME/server/lib,DOMAIN_HOME/lib, restarted the server but still no luck:
    patch:
    check-appserver-type:
    [echo]
    [echo] websphere.server----${appserver.was}
    [echo]
    explode-archived-apps:
    [delete] Deleting directory /opt/oracle/Middleware/Oracle_IAM/server/apps/oim.ear
    [delete] Deleting directory /opt/oracle/Middleware/Oracle_IAM/server/apps/Nexaweb.ear
    [mkdir] Created dir: /opt/oracle/Middleware/Oracle_IAM/server/apps/oim.ear
    [mkdir] Created dir: /opt/oracle/Middleware/Oracle_IAM/server/apps/Nexaweb.ear
    [unzip] Expanding: /opt/oracle/Middleware/Oracle_IAM/server/patching/oim.ear into /opt/oracle/Middleware/Oracle_IAM/server/apps/oim.ear
    [unzip] Expanding: /opt/oracle/Middleware/Oracle_IAM/server/patching/Nexaweb.ear into /opt/oracle/Middleware/Oracle_IAM/server/apps/Nexaweb.ear
    check-appserver-type:
    [echo]
    [echo] websphere.server----${appserver.was}
    [echo]
    explode-archived-apps-was:
    seed-ootb-jobs:
    seed-ootb-jobs:
    [echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
    [java] Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
    [java] at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    [java] at java.security.AccessController.doPrivileged(Native Method)
    [java] at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    [java] at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    [java] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    [java] at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    [java] at java.lang.Class.forName0(Native Method)
    [java] at java.lang.Class.forName(Class.java:169)
    [java] at oracle.iam.scheduler.seed.SeedSchedulerData.startSeeding(SeedSchedulerData.java:723)
    [java] at oracle.iam.scheduler.seed.SeedSchedulerData.main(SeedSchedulerData.java:111)
    BUILD FAILED
    /opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:21: The following error occurred while executing this line:
    /opt/oracle/Middleware/Oracle_IAM/server/setup/deploy-files/setup.xml:84: The following error occurred while executing this line:
    /opt/oracle/Middleware/Oracle_IAM/server/seed_data/seed-rcu-data.xml:37: Java returned: 1
    Total time: 50 seconds
    Regards,
    Sunny

  • Oracle 9i export error after running catexp.sql file

    After running catexp.sql file in oracle 9i 9.2.0.7.0 as system user,it gives the following error while logging
    ORA-04020: deadlock detected while trying to lock object SYS.DBMS_STANDARD
    please help me..............

    "catexp.sql" is to be run by SYS AS SYSDBA.
    You'd have to cleanup any extra objects that you created in the SYSTEM account.
    Why did you think that you needed to run "catexp.sql" ? Are you exporting using 9i exp against a 10g database or against a 9i database ?

  • Several errors after running catalog.sql

    I did a fresh installation of oracle apps EBS 11.5.10.2 on Linux OEL and was trying to do an import/export and it was not working as expected. So after i looked at Oracle's documentation it said catalog.sql has to be run before using the import/export. So i ran catalog.sql first but i did not run it with SYSDBA but ran it as SYSTEM and i saw several errors like access denied etcv. after i ran the catalog.sql i was not able to login via apps or any other user except SYSTEM and was giving me erros like ORA-04065:not executed,altered or dropped stored procedure "SYS.DBMS_SESSION"
    After this to fix the issue i ran @?/rdbms/admin/catpatch.sql and @?/rdbms/admin/utlrp as SYSDBA but both executed a lot of grants etc but are haging at some point and not finishing.
    The current state of the database is that im not able to login via any user except SYSTEM and i think i corrupted the db dictionary as everywhere i see they say running catalog.sql on an existing database is a bad idea. Can anyone help?

    Hi Dheeraj,
    My db version is 9.2.0.5.0 and OS is OEL 5.7.
    The doc where it was mentioned to run catalog.sql before using import/export is below:
    http://docs.oracle.com/cd/B10501_01/server.920/a96652/ch01.htm
    Please do not follow the steps in this link and instead follow the steps in (9i Export/Import Process for Oracle Applications Release 11i [ID 230627.1]).
    Currently when im trying to login using apps or any other user below are errors i get.
    ERROR:
    ORA-00604: error occurred at recursive SQL level1
    ORA-04068: existing state of packages has been discarded
    ORA-04065: not executed, altered or dropped stored procedure "SYS.DBMS_SESSION"
    ORA-06508: PL/SQL: could not find program unit being called
    ORA-06512:at "SYS.OWA_VPD_CTX", line 5
    ORA-06512:at "SYS.PORTAL_LOGIN", line 3
    ORA-06512:at line 2
    Can you pls help me to fix this.The status of the package is invalid and you need to validate it. Connect as sysdba and issue:
    SQL> select owner, object_type, status
    from dba_objects
    where object_name = 'DBMS_SESSION';
    SQL> alter package DBMS_SESSION compile body;
    SQL> show error
    SQL> alter package DBMS_SESSION compile;
    SQL> show errorPlease also see:
    Data Dictionary Objects Invalid after Running catalog.sql, catproc.sql, utlrp.sql or catpatch.sql [ID 752783.1]
    Debug and Validate Invalid Objects [ID 300056.1]
    How to Diagnose Invalid or Missing Data Dictionary (SYS) Objects [ID 554520.1]
    Thanks,
    Hussein

  • Won't print after sitting idle for a while

    Officejet Pro 8600 Plus. I have to turn the printer off and back on after it sits idle for a while. The printer shows on line in the control panel until you try to print then it goes off line. Wireless network Windows 7.

    Hello LARMC, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing idle issues.  I would like to help.
    I would recommend performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Macbook Air 11" (Mid 2013) takes time to become active after being inactive for a while

    I've got Macbook Air 11" (Mid 2013). But it has an issue of taking up some time to be active after it has been inactive for a while (like when i dont use it for a while the macbook autosleeps and then when i want to work on it and try to get it active the screen only shows mouse pointer in a black screen and then the other components like the small window where you enter password and other takes time to appear...)
    plz help...I've been facing this problem for 2 weeks now...and wanna fix it as soon as possible....plz help...

        Hope this helps.
        http://support.apple.com/kb/PH13976
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Best.

Maybe you are looking for