Error rman

hello everybody
i have a problem , when i try to registry a database apears the follow errro:
RMAN> register database;
starting full resync of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 10/21/2010 14:33:47
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 10/21/2010 14:33:47
RMAN-20079: full resync from primary database is not done
someone can i help me?

Hello , thanks for reply
i try to follow that steps but i don´t know if i made some wrong
$ export ORACLE_SID=plascdm1
mxcpt5krks19ldc5 oracle OracleVersion:11.1.0 plascdm1 /export/home/oracle
$ rman target / catalog rman11g/xxxxx@rcat11g1
Recovery Manager: Release 11.1.0.7.0 - Production on Thu Oct 21 14:33:29 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: PLASCDM (DBID=637859704)
connected to recovery catalog database
RMAN>
RMAN>
RMAN> register database;
starting full resync of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 10/21/2010 14:33:47
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 10/21/2010 14:33:47
RMAN-20079: full resync from primary database is not done
RMAN> resync catalog;
starting full resync of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of resync command on default channel at 10/21/2010 14:46:59
RMAN-20079: full resync from primary database is not done
can you help me
Edited by: luix97 on 21/10/2010 12:52 PM
Edited by: luix97 on 21/10/2010 12:54 PM

Similar Messages

Error : RMAN-06054

Hi,
I get the error "Error : RMAN-06054" when I try to recover a full database backup.
The backup command used was:
BACKUP DATABASE PLUS ARCHIVELOG;
In my tests, when I dont remove the ONLINE redo log files the recovering works OK!
I use auto backup controlfile configuration.
Thank you,
Faria

I get the same problem. I followed this guide:
http://www.orafusion.com/art_rman3.htm
and get the error:
RMAN-00571: ==============================
RMAN-00569: =ERROR MESSAGE STACK FOLLOWS =
RMAN-00571: ===============================
RMAN-03002: failure of recover command at 04/01/2005 14:14:43
RMAN-06054: media recovery requesting unknown log: thread 1 scn 32230460
How to avoid it?

ORA-12560: TNS:protocol adapter error rman

hello all,
i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA....
I droped the database to do a test restore...but i cant even login to rman or sqlplus ??? i was able to login to rman before to take a backup....but now i cant.... could not figure out why...any help would be appericiated....
C:\oracle\sql>set ORACLE_SID=comp
C:\oracle\sql>
C:\oracle\sql>echo %ORACLE_SID%
comp
C:\oracle\sql>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 09:54:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12560: TNS:protocol adapter error
C:\oracle\sql>
C:\oracle\sql>
C:\oracle\sql>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUL-2011 09:54:20
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxxxxxx)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date                06-JUL-2011 09:53:53
Uptime                    0 days 0 hr. 0 min. 26 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File         C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxxxx)(PORT=1521)))
Services Summary...
Service "COMP" has 1 instance(s).
Instance "COMP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\oracle\sql>

user8363520 wrote:
hello all,
i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA....
I droped the database to do a test restore...but i cant even login to rman or sqlplus ??? i was able to login to rman before to take a backup....but now i cant.... could not figure out why...any help would be appericiated....
If you have backup and you dropped database then you can create it again.
1) Create directories for background,user,audit dumpdest and control,online log,datafiles.
2) Create OracleServiceComp if that is not exists using ORADIM utility(oradim -new -sid COMP -intpwd <syspass> -pfile <pfile location>)
3) After starting oracle service
set ORACLE_SID=COMP
rman target /
/*if you do not have spfile also then you have to restore it from
full/auto backup or startup database using pfile(create it manually)*/
startup nomount ;
restore controlfile from 'full or autobackup location';
alter database mount;
catalog start with 'backup location';
restore database;
recover database;
alter database open resetlogs;

Error RMAN-20242

Good morning,
When I do an incremental level0 backup I do have:
Starting backup at 21/07/06
released channel: bck_chan1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 07/21/2006 14:56:11
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20242: specification does not match any archive log in the recovery catalog
I do the archive log current, my script is
run
sql "alter system archive log current";
allocate channel bck_chan1 type disk;
backup
incremental level = 0
format '/orabackup/CATGRID/rman/CATGRID_%s_%p_%t_inc0.bck'
tag 'CATGRID_fullinc_backup'
database;
# backup all archive logs
backup
filesperset 50
format '/orabackup/CATGRID/rman/CATGRID_%s_%p_%t_arch.bck'
(archivelog until time 'SYSDATE-1' delete input);
release channel bck_chan1;
any help will be very appreciate
Fabrice

Yes, I made an 'archive log current'
with this command, all is working well
RMAN> crosscheck archivelog all;
Regards
Fabrice

Restore error RMAN-11003

Hi,
Db :11.2.0.1
Os : Aix 6
we are doing refresh from production to test server using rman.We started instance and restored the control file.
we got the following error when execute restore script.
MAN> connect target *
2> RUN
3> {
4> allocate channel t1 type 'SBT_TAPE' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_iit6.opt)';
5> allocate channel t2 type 'SBT_TAPE' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_iit6.opt)';
6> allocate channel t3 type 'SBT_TAPE' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_iit6.opt)';
7> allocate channel t4 type 'SBT_TAPE' parms 'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo_iit6.opt)';
8> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/system01.dbf' TO '+P7_DATAGROUP01/P7/system01.dbf';
9> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/sysaux01.dbf' TO '+P7_DATAGROUP01/P7/sysaux01.dbf';
10> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/undotbs01.dbf' TO '+P7_DATAGROUP01/P7/undotbs01.dbf';
11> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/users01.dbf' TO '+P7_DATAGROUP01/P7/users01.dbf';
12> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/tools01.dbf' TO '+P7_DATAGROUP01/P7/tools01.dbf';
13> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/two_kb_tbs.dbf' TO '+P7_DATAGROUP01/P7/two_kb_tbs.dbf';
14> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/wwfdata01.dbf' TO '+P7_DATAGROUP01/P7/wwfdata01.dbf';
15> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/wwfindex01.dbf' TO '+P7_DATAGROUP01/P7/wwfindex01.dbf';
16> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/ntwksdata01.dbf' TO '+P7_DATAGROUP01/P7/ntwksdata01.dbf';
17> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/ntwksindex01.dbf' TO '+P7_DATAGROUP01/P7/ntwksindex01.dbf';
18> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/emadata01.dbf' TO '+P7_DATAGROUP01/P7/emadata01.dbf';
19> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/emaindex01.dbf' TO '+P7_DATAGROUP01/P7/emaindex01.dbf';
20> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/scpodata01.dbf' TO '+P7_DATAGROUP01/P7/scpodata01.dbf';
21> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/scpoindex01.dbf' TO '+P7_DATAGROUP01/P7/scpoindex01.dbf';
22> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/igpdata01.dbf' TO '+P7_DATAGROUP01/P7/igpdata01.dbf';
23> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/ikeadata01.dbf' TO '+P7_DATAGROUP01/P7/ikeadata01.dbf';
24> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/ikeaindex01.dbf' TO '+P7_DATAGROUP01/P7/ikeaindex01.dbf';
25> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/fedata01.dbf' TO '+P7_DATAGROUP01/P7/fedata01.dbf';
26> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/indx01.dbf' TO '+P7_DATAGROUP01/P7/indx01.dbf';
27> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/prefstat01.dbf' TO '+P7_DATAGROUP01/P7/prefstat01.dbf';
28> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/support01.dbf' TO '+P7_DATAGROUP01/P7/support01.dbf';
29> SET NEWNAME FOR DATAFILE '+IIT6_DATAGROUP01/iit6/tmpscpix01.dbf' TO '+P7_DATAGROUP01/P7/tmpscpix01.dbf';
30> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo01a.log'' TO ''+P7_REDOGROUP01/P7/redo01a.log'' ";
31> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo02a.log'' TO ''+P7_REDOGROUP01/P7/redo02a.log'' ";
32> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo03a.log'' TO ''+P7_REDOGROUP01/P7/redo03a.log'' ";
33> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo01b.log'' TO ''+P7_REDOGROUP01/P7/redo01b.log'' ";
34> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo02b.log'' TO ''+P7_REDOGROUP01/P7/redo02b.log'' ";
35> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo03b.log'' TO ''+P7_REDOGROUP01/P7/redo03b.log'' ";
36> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo04a.log'' TO ''+P7_REDOGROUP01/P7/redo04a.log'' ";
37> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo04b.log'' TO ''+P7_REDOGROUP01/P7/redo04b.log'' ";
38> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo05a.log'' TO ''+P7_REDOGROUP01/P7/redo05a.log'' ";
39> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo05b.log'' TO ''+P7_REDOGROUP01/P7/redo05b.log'' ";
40> RESTORE DATABASE until time "to_date('2012-10:28-11:15:40','YYYY-MM-DD-HH24:MI:SS')";
41> SWITCH DATAFILE ALL;
42> release channel t1;
43> release channel t2;
44> release channel t3;
45> release channel t4;
46> }
47>
connected to target database: iit6 (DBID=3947283088, not open)
using target database control file instead of recovery catalog
allocated channel: t1
channel t1: SID=4975 device type=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.5.2.1
allocated channel: t2
channel t2: SID=5427 device type=SBT_TAPE
channel t2: Data Protection for Oracle: version 5.5.2.1
allocated channel: t3
channel t3: SID=5879 device type=SBT_TAPE
channel t3: Data Protection for Oracle: version 5.5.2.1
allocated channel: t4
channel t4: SID=6331 device type=SBT_TAPE
channel t4: Data Protection for Oracle: version 5.5.2.1
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
sql statement: ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo01a.log'' TO ''+P7_REDOGROUP01/P7/redo01a.log''
sql statement: ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo02a.log'' TO ''+P7_REDOGROUP01/P7/redo02a.log''
sql statement: ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo03a.log'' TO ''+P7_REDOGROUP01/P7/redo03a.log''
sql statement: ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo01b.log'' TO ''+P7_REDOGROUP01/P7/redo01b.log''
released channel: t1
released channel: t2
released channel: t3
released channel: t4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/28/2012 12:47:47
RMAN-11003: failure during parse/execution of SQL statement: ALTER DATABASE RENAME FILE '+IIT6_REDOGROUP01/iit6/redo01b.log' TO '+P7_REDOGROUP01/P7/redo01b.log'
ORA-01511: error in renaming log/data files
ORA-01516: nonexistent log file, data file, or temporary file "+IIT6_REDOGROUP01/iit6/redo01b.log"
Recovery Manager complete.
we have the following data group in target machine.
P7_ARCHGROUP01/
P7_DATAGROUP01/
P7_REDOGROUP01/
P7_REDOGROUP02/
Any suggestions.
Thanks

30> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo01a.log'' TO ''+P7_REDOGROUP01/P7/redo01a.log'' ";
31> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo02a.log'' TO ''+P7_REDOGROUP01/P7/redo02a.log'' ";
32> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo03a.log'' TO ''+P7_REDOGROUP01/P7/redo03a.log'' ";
33> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo01b.log'' TO ''+P7_REDOGROUP01/P7/redo01b.log'' ";
34> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo02b.log'' TO ''+P7_REDOGROUP01/P7/redo02b.log'' ";
35> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo03b.log'' TO ''+P7_REDOGROUP01/P7/redo03b.log'' ";
36> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo04a.log'' TO ''+P7_REDOGROUP01/P7/redo04a.log'' ";
37> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo04b.log'' TO ''+P7_REDOGROUP01/P7/redo04b.log'' ";
38> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo05a.log'' TO ''+P7_REDOGROUP01/P7/redo05a.log'' ";
39> SQL "ALTER DATABASE RENAME FILE ''+IIT6_REDOGROUP01/iit6/redo05b.log'' TO ''+P7_REDOGROUP01/P7/redo05b.log'' ";Check v$logfile and see the location of the member and use
SQL>ALTER DATABASE RENAME FILE '<old path>' TO 'new path';after do this comment the above lines and run script again .

Rman with error RMAN-06003

C:\>rman
Recovery Manager: Release 8.1.5.0.0 - Production
RMAN> connect rcvcat rman/rman@new4
RMAN-06008: connected to recovery catalog database
RMAN> connect target sys/change_on_install@new5
RMAN-06005: connected to target database: new5 (DBID=1527753793)
RMAN> run{
2> allocate channel d1 type disk ;
3> backup ( database format '/opt/oracle/oradata/bp/bp_%s_%p' ) ;
4> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: d1
RMAN-08500: channel d1: sid=8 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03023: executing command: backup
RMAN-08008: channel d1: starting full datafile backupset
RMAN-08502: set_count=2 set_stamp=437501496 creation_time=11-8TB -01
RMAN-08010: channel d1: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00001 name=/opt/oracle/oradata/system01.dbf
RMAN-08011: including current controlfile in backupset
RMAN-08522: input datafile fno=00007 name=/opt/oracle/oradata/drsys01.dbf
RMAN-08522: input datafile fno=00003 name=/opt/oracle/oradata/rbs01.dbf
RMAN-08522: input datafile fno=00004 name=/opt/oracle/oradata/temp01.dbf
RMAN-08522: input datafile fno=00005 name=/opt/oracle/oradata/users01.dbf
RMAN-08522: input datafile fno=00006 name=/opt/oracle/oradata/indx01.dbf
RMAN-08522: input datafile fno=00008 name=/opt/oracle/oradata/test01.dbf
RMAN-08522: input datafile fno=00002 name=/opt/oracle/oradata/oemrep01.dbf
RMAN-08013: channel d1: piece 1 created
RMAN-08503: piece handle=/opt/oracle/oradata/bp/bp_2_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:00:38
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-08031: released channel: d1
RMAN> run{
2> allocate channel d1 type disk ;
3> restore database ;
4> recover database ;
5> release channel d1 ;
6> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: d1
RMAN-08500: channel d1: sid=8 devtype=DISK
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: d1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03002: failure during compilation of command
RMAN-03013: command type: IRESTORE
RMAN-06003: ORACLE error from target database: ORA-01843: not a valid month
RMAN-06097: text of failing SQL statement: select decode(bitand(festa,(4096+128)
),128,fecps,4096,fecps,0) ,decode(bitand(festa,(4096+128)),128,281474976710655,4
096,controlfile_change#,0) ,decode(bitand(festa,(4096+128)),128,SYSDATE,4096,con
trolfile_time,to_date('JAN 01 1988','MON DD YYYY')) ,feofs ,feonc_scn ,to_date(n
vl(feonc_tim,'01/01/88 00:01:01'),'MM/DD/RR HH24:MI:SS') into :b1,:b2,:b3,:b4,:b
5,:b6 from x$kccfe ,v$database where (fenum=:b7 and fedup=1)

Ben,
I can't say I've tried this, but maybe Gaby intended to point you to the initialization parameters in the init.ora file. There's more info at
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a76961/ch1110.htm#33671
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a76961/ch1106.htm#33656
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a76961/ch12.htm#1188
(As to that third one: That's only valuable if the concept of "initialization parameter" is still unfamiliar to you.)
I hope that's a help.
. . . Garry

Rman with error RMAN-06054

first, i backup all datafiles. then i delete the datafile of system tablesapce.
then i recover database by recovery manager. it makes these errors.i do not
how slove it.i nees help,i will thank ereryone who help me
RMAN-03022: compiling command: recover(4)
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover(4)
RMAN-06054: media recovery requesting unknown log: thread 1 scn 1869941
null

Why don't review your syntax of your recover statements? Maybe there're some surprises waiting for you.

Error rman-20021 while trying to backup dataabase

Hi,
I built a new instance 11g and tried to backup this database. My settings:
RMAN> show all
2> ;
RMAN-Konfigurationsparameter f³r Datenbank mit db_unique_name ORATOSHI sind:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT "C:\ORATOSHI_BACKUP\%U";
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BZIP2'; # default
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei show Befehl auf 07/12/2009 06:51:35
RMAN-20021: Datenbank nicht festgelegt
RMAN-06031: Datenbank-Schl³sselwort konnte nicht ³bersetzt werden
Where is my fault?
Please help me
Siegwin

with or without a repository?
how did you log onto RMAN?
can you translate the following:
RMAN-03002: Fehler bei show Befehl auf 07/12/2009 06:51:35
RMAN-20021: Datenbank nicht festgelegt
RMAN-06031: Datenbank-Schl³sselwort konnte nicht ³bersetzt werden
into English for us?
Thanks.

RMAN Error RMAN-06100:

Hi,
I'm testing RMAN Backup on a new database,I first tested the backup and backup was successful.Now thet I need to test restoring the backup i'm getting error msg below.
"RMAN-06100: no channel to restore a backup or copy of datafile".
I'm not sure if the command I use is wrong,here is wat I did.Pls correct me if i'm wrong.I run following script
run {
shutdown immediate; # use abort if this fails
startup mount;
restore database;
recover database;
alter database open;
}

Thank you everyone!! I manage to resolve the prblm.I did not include TDPO_OPTFILE path when I run the restore script. I tried the following script and now database is restoring.Haha.. I'm So happy.. Thank you so much for all the metalink notes id.
# Recovery database from backup tape
startup mount;
run {
set until time "to_date('17-OCT-2007 19:00:00','DD-MON-YYYY HH24:MI:SS')";
allocate channel t1 type 'sbt_tape' parms
'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
restore database;
recover database ;
release channel t1;
alter database open resetlogs;

Error RMAN connection to auxiliary database ORA- 12514

Hi,
I'm trying to make a clone of my database in another server but when I'm trying to connect as follow the RMAN return
to me the error ORA-12514.
C:\Documents and Settings\joses.morales>rman TARGET sys/pass@iswgen nocatalog
AUXILIARY sys/[email protected]
Recovery Manager: Release 8.1.7.4.1 - Production
RMAN-06005: connected to target database: ISWGEN (DBID=2348350645)
RMAN-06009: using target database controlfile instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
For more information:
- the auxiliary database is started whit nomount option.
- this is my listener.ora in the auxiliary host
     LISTENER =
     (DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = WSSP61)(PORT = 1521))
     SID_LIST_LISTENER =
     (SID_LIST =
     (SID_DESC =
     (GLOBAL_DBNAME = oracle8)
     (ORACLE_HOME = C:\oracle\ora81)
     (SID_NAME = iswgen)
     (SID_DESC =
     (GLOBAL_DBNAME = oracle8)
     (ORACLE_HOME = C:\oracle\ora81)
     (SID_NAME = oracle8)
- this is my tnsnames.ora in the auxiliary host
     ISWGEN =
     (DESCRIPTION =
     (ADDRESS_LIST =
     (ADDRESS = (PROTOCOL = TCP)(HOST = wssp61)(PORT = 1521))
     (CONNECT_DATA =
     (SERVICE_NAME = iswgen)
     ORACLE8 =
     (DESCRIPTION =
     (ADDRESS_LIST =
     (ADDRESS = (PROTOCOL = TCP)(HOST = WSSP61)(PORT = 1521))
     (CONNECT_DATA =
     (SERVICE_NAME = oracle8)
- this is my tnsnames.ora in the target host
iswgen =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = gdcoracle)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = iswgen)
     iswgen.wssp61 =
     (DESCRIPTION =
     (ADDRESS_LIST =
     (ADDRESS = (PROTOCOL = TCP)(HOST = wssp61)(PORT = 1521))
     (CONNECT_DATA =
     (SERVICE_NAME = iswgen)
- target server: gdcoracle
- auxiliary server: wssp61
- global name in auxiliary: Oracle8
- intances in auxiliary: Oracle8 & Iswgen
I was expecting the follow message:
connected to target database: ISWGEN (DBID=519338572)
using target database control file instead of recovery catalog
connected to auxiliary database: ISWGEN.WSSP61 (not mounted)
Can anybody help me to resolve this error ORA-12514??
Thanks

I'm try to connect to the auxiliary server at SQLPLUS and I get the follow:
C:\Documents and Settings\joses.morales>sqlplus /nolog
SQL*Plus: Release 8.1.7.0.0 - Production on Sex Jun 1 12:26:09 2007
(c) Copyright 2000 Oracle Corporation. All rights reserved.
SQL> conn sys@iswgen
Informe a senha:
ERROR:
ORA-12514: TNS:listener nao conseguiu resolver o SERVICE_NAME fornecido no
descitor de conexao
SQL> conn sys@iswgen as sysdba
Informe a senha:
ERROR:
ORA-12514: TNS:listener nao conseguiu resolver o SERVICE_NAME fornecido no
descitor de conexao
SQL> conn internal as sysdba
Conectado.
SQL>
Any sugestions?
Thanks everyone and regards

Can you help me? I meet errors when I do incomplete recovery with RMAN

In recover step, There are following errors:
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
question:
1. Should I restore archive log files generated on July 16th back to orignal archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
The following is the detail information:
The database is ok when I try to do incomplete recovery database that was fully backed up on July,16th,2004. The database is oracle 8.1.7 and is in the archive mode:
The following is the backup script:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=db01,OB2BARLIST=ora8i_online)';
backup incremental level 0 filesperset 1
format 'ora8i_online<db01_%s:%t:%p>.dbf'
database
include current controlfile
archivelog all delete input;
I use it to do a full backup on July 16th,17th successfully.
And I use the following scripts to do incomplete recovery:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=ORACLE8,OB2APPNAME=db01)';
sql "alter database mount";
set until time ='17.07.2004';
restore database;
recover database;
sql "alter database open resetlogs";
sql "alter database open";
There script is successful in restore step. But there are some errors in recover step. The detail information is showing in following log:
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: dev_0
RMAN-08500: channel dev_0: sid=13 devtype=SBT_TAPE
RMAN-08526: channel dev_0: HP OpenView OmniBack II A.04.10/176
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter database mount
RMAN-03023: executing command: sql
RMAN-03022: compiling command: set
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2056 set_stamp=531622798 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2180 set_stamp=531623409 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08523: restoring datafile 00001 to /d/db/oradata/db01/system01.dbf
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2180:531623409:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2212:531623994:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-03022: compiling command: recover
RMAN-03022: compiling command: recover(1)
RMAN-03022: compiling command: recover(2)
RMAN-03022: compiling command: recover(3)
RMAN-03023: executing command: recover(3)
RMAN-08054: starting media recovery
RMAN-03022: compiling command: recover(4)
RMAN-03026: error recovery releasing channel resources
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
RMAN-08031: released channel: dev_1
RMAN-08031: released channel: dev_2
RMAN-08031: released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover(4)
RMAN-06003: ORACLE error from target database: ORA-01220: file based sort illegal before database is open
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 7220
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 5053
ORA-06512: at line 1
I repeat my questions:
1. Should I restore archive log files generated on July 16th back to original archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
Can you help me ? Thank you.

which o.s u are using i can't help you as i never worked on ver 8i,i can tell you incomplete recovery on oracle 9i on win 2000 server.
thanks : alok kumar

Can you help me? I meet some errors when I do incomplete recovery with RMAN

In recover step, There are following errors:
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
question:
1. Should I restore archive log files generated on July 16th back to orignal archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
The following is the detail information:
The database is ok when I try to do incomplete recovery database that was fully backed up on July,16th,2004. The database is oracle 8.1.7 and is in the archive mode:
The following is the backup script:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=db01,OB2BARLIST=ora8i_online)';
backup incremental level 0 filesperset 1
format 'ora8i_online<db01_%s:%t:%p>.dbf'
database
include current controlfile
archivelog all delete input;
I use it to do a full backup on July 16th,17th successfully.
And I use the following scripts to do incomplete recovery:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=ORACLE8,OB2APPNAME=db01)';
sql "alter database mount";
set until time ='17.07.2004';
restore database;
recover database;
sql "alter database open resetlogs";
sql "alter database open";
There script is successful in restore step. But there are some errors in recover step. The detail information is showing in following log:
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: dev_0
RMAN-08500: channel dev_0: sid=13 devtype=SBT_TAPE
RMAN-08526: channel dev_0: HP OpenView OmniBack II A.04.10/176
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter database mount
RMAN-03023: executing command: sql
RMAN-03022: compiling command: set
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2056 set_stamp=531622798 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2180 set_stamp=531623409 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08523: restoring datafile 00001 to /d/db/oradata/db01/system01.dbf
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2180:531623409:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2212:531623994:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-03022: compiling command: recover
RMAN-03022: compiling command: recover(1)
RMAN-03022: compiling command: recover(2)
RMAN-03022: compiling command: recover(3)
RMAN-03023: executing command: recover(3)
RMAN-08054: starting media recovery
RMAN-03022: compiling command: recover(4)
RMAN-03026: error recovery releasing channel resources
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
RMAN-08031: released channel: dev_1
RMAN-08031: released channel: dev_2
RMAN-08031: released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover(4)
RMAN-06003: ORACLE error from target database: ORA-01220: file based sort illegal before database is open
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 7220
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 5053
ORA-06512: at line 1
I repeat my questions:
1. Should I restore archive log files generated on July 16th back to original archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
Can you help me ? Thank you.

You are correct. In RMAN8i, you should add the "alter system archive log current; command before you backup the archive logs.
You are running into the case where Oracle needs additional redo to make the database consistent that was located in the current online log at the time of the backup.
If you set UNTIL TIME to an earlier time does the recover work?
In Oracle9i, if you issue the command, "backup database plus archive logs", RMAN will automatically archive the current online log before performing the archive log backups.
Thanks, Tammy

Got error while recover controlfile with rman

Dear all,
My controlfile and some datafiles were crash and i tried to recover their with rman as the following step:
1. startup nomount;
2. restore controlfile from autobackup;
3. alter database mount;
4. restore database;
5.SELECT archivelog_change#-1 FROM v$database;
ARCHIVELOG_CHANGE#-1
1301671
6.run {
set until scn 1301671;
recover database;
executing command: SET until clause
Starting recover at 01 พ.ย. 2006
using channel ORA_DISK_1
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 11/01/2006 15:38:01
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database reco
ver if needed
start until change 1301671 using backup controlfile
ORA-00283: recovery session canceled due to errors
ORA-01190: controlfile or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\DB01\SYSTEM01.DBF'
What happend? Please give me some advise.
Thaks for advance !
Chara

After every resetlogs you have to take fresh backup.
It seems you have opened your database in resetlogs and your backup is prior to this resetlogs.So the controlfile is showing inconsistance with the other datafiles.

ORA-27067 Error while restoring database using RMAN

Hi All,
I am trying to restore the backups from my production database to an other server. I was able to restore the spfile and control files but at the step where I restore the datafiles I get the following error:
RMAN-03002: failure of restore command at 11/03/2008 14:28:16
ORA-19587: error occurred reading 0 bytes at block number 1
ORA-27091: skgfqio: unable to queue I/O
ORA-27067: skgfdisp: size of buffer is invalid
The OS and the Oracle version on the source server (on which the backups were taken) and the target server (the backups being restored to) are the same. They both are running SUNOS 5.9 and Oracle 9.2. I
Below are what were reported in the trace files:
Unix process pid: 12359, image: oracle@ (TNS V1-V3)
*** SESSION ID:(13.1) 2008-11-03 15:23:26.265
*** 2008-11-03 15:23:26.275
corrupt block 1 found during reading backup piece,file=/xxx/xxx/36jucqpe_1_1.bak, corr_type=1
dump corrupted block
2F11600 00020000 00000001 00000000 00000101 [................]
2F11610 00000000 00000000 00000000 00000000 [................]
Repeat 6 times
*** 2008-11-03 16:19:29.778
corrupt block 1 found during reading backup piece,file=/xxx/xxx/36jucqpe_1_1.bak, corr_type=1
dump corrupted block
3211C00 00020000 00000001 00000000 00000101 [................]
3211C10 00000000 00000000 00000000 00000000 [................]
Repeat 6 times
Redo thread mounted by this instance: 0 <none>
Oracle process number: 14
Unix process pid: 12194, image: oracle@ (TNS V1-V3)
*** SESSION ID:(11.3) 2008-11-03 14:09:42.986
(blkno = 0x88, size = 276, max = 1, in-use = 1, last-recid= 0)
(blkno = 0x89, size = 56, max = 145, in-use = 1, last-recid= 1)
*** 2008-11-03 15:16:40.960
*** SESSION ID:(13.1) 2008-11-03 15:16:40.951
=====================
PARSING IN CURSOR #2 len=68 dep=0 uid=0 oct=42 lid=0 tim=172140509128 hv=287842151 ad='35cd9364'
alter session set events '10046 trace name context forever, level 8'
END OF STMT
EXEC #2:c=0,e=250,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=4,tim=172140509103
WAIT #2: nam='SQL*Net message to client' ela= 8 p1=1650815232 p2=1 p3=0
*** 2008-11-03 15:17:18.666
WAIT #2: nam='SQL*Net message from client' ela= 36822299 p1=1650815232 p2=1 p3=0
=====================
PARSE ERROR #2:len=50 dep=0 uid=0 oct=3 lid=0 tim=172177341974 err=1219
select /*+ FULL(t) */ count(*) from sys.source$ t
WAIT #2: nam='SQL*Net break/reset to client' ela= 61 p1=1650815232 p2=1 p3=0
WAIT #2: nam='SQL*Net break/reset to client' ela= 279 p1=1650815232 p2=0 p3=0
WAIT #2: nam='SQL*Net message to client' ela= 5 p1=1650815232 p2=1 p3=0
Unix process pid: 12156, image: oracle@ (TNS V1-V3)
*** SESSION ID:(11.3) 2008-11-03 14:09:08.687
Archiving is disabled
Archiving is disabled
Can anyone help me resolve this error?
Thanks,
Ashok

Hi,
We finally got this issue resolved. I think the error was because the source database server was running 64 bit Oracle 9.2.0 and we installed a 32 bit Oracle 9.2.0 database on the target server. We then did a fresh install of 64 bit Oracle 9.2.0 database on the target server and the restoration worked. Also, after copying all the backup files to the target DB server, change the access rights of all those files and the folder containing them to 777.
Thanks,
Ashok

RMAN Backup error:ORA-04030: out of process memory

Hi,
Our RMAN backup is failing with below error:
===========================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 05:31:33
ORA-04030: out of process memory when trying to allocate 82444 bytes (pga heap,control file i/o buffer)
=============================
Please suggest
Thanks and Regards

We upgrade our catalog database(Linux) to 10.2.0.4 and our target database is 10.2.0.3(Windows),
we executed upgrade catalog twice and then when we again tried to execute the below command
rman sys/syspwd@targetdb catalog rman/rman@rmancat
Recovery Manager: Release 10.2.0.4.0 - Production on Sat May 22 15:10:36 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
connected to target database: WEBCT (DBID=3699379059)
connected to recovery catalog database
RMAN>
=======================
Still we are getting this error
and our backup falied with below errors:
======================
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current connected to target database: WEBCT (DBID=3699379059) connected to recovery catalog database
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 15:09:44
ORA-06550: line 1, column 14:
PLS-00306: wrong number or types of arguments in call to 'VALIDATEARCHIVEDLOG'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
==========================
Please suggest

Error rman

Similar Messages

Maybe you are looking for