Error Text in COGI : Multiple assignment of a line ID.How to resolve this?
Error Text in COGI : Multiple assignment of a line ID.How to resolve this?
Hi Sanchit
first you should implement notes 1506789 and 1494393. If then the issue is not resolved you should open a message in SAP Service Marketplace and let the SAP Support check the issue.
BR Sabine
Similar Messages
-
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
BAPI : Multiple assignment of a line ID error in BAPI_GOODSMVT_CREATE
Hi All,
I am using BAPI_GOODSMVT_CREATE for upload using excel ...........
but i find error when execute .... Multiple assignment of a line ID
anyone know about this..........
Thanks in advance
Santoshwhich movement type you are using and wht is your movement indicator?
-
when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum descHi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan -
How to resolve this Error ORA-04030: out of process memory when trying to a
Hi
I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
structs,krvuinl_InitNewLcr)
Can anyone guide me how to resolve this issue.
ThanksHi,
As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
inet:
udp_recvspace = 262144
Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
Nicolas. -
How to Resolve this Error comming in SMP2.3 HWC?
Hi Experts,
20140605T150459.418|1|MyDynamicChart:1 -- Request: <M><H></H><S>Start</S><A>GetCustomData</A><VS><V k="Port_et_key" t="T">1433</V><V k="User_Name_et_key" t="T">sup</V><V k="Password_et_key" t="T">123</V><V k="Vertical_Column_et_key" t="T">sal</V><V k="No_of_Rows_wt_key" t="T">7</V><V k="Horizontal_Column_et_key" t="T">name</V><V k="Database_Name_et_key" t="T">sup</V><V k="Ipaddress_et_key" t="T">192.168.1.7</V><V k="Table_Name_et_key" t="T">emp</V><V k="ErrorLogs" t="L" /></VS></M>
20140605T150459.418|1|MyDynamicChart:1 -- ResponseHeader: {"id":"a4af2a9cbf7c48f8a06c2c46a977fefc","cid":"46#MyDynamicChart:1","pv":"3","sig":"94f82e26311448c1901e444c7c7f475e","loginFailed":false,"method":"searchFailed","log":"[{\"_op\":\"N\",\"level\":\"ERROR\",\"code\":404,\"eisCode\":\"400\",\"message\":\"com.sybase.dataservices.DSException:HTTP status code is [400], expected [200]; response body is []\",\"component\":\"Newconnection_driverName_com_microsoft_sqlserver_jdbc_SQLServerD\",\"entityKey\":null,\"operation\":\"search\",\"requestId\":\"a4af2a9cbf7c48f8a06c2c46a977fefc\",\"timestamp\":\"2014-06-05 09:34:59.366\",\"messageId\":610003,\"_rc\":0}]","mbo":"Newconnection_driverName_com_microsoft_sqlserver_jdbc_SQLServerD","app":"MyDynamicChart:1","pkg":"dynamicdbchart:1.0"}
20140605T150946.650|3|Mychart:1 -- loading meta data from: C:\SAP\MobilePlatform\Servers\MessagingServer\Bin\Mobile Workflow\456_1\workflowclient.xml
20140605T150946.810|3|Mychart:1 -- loading meta data for screen: Start and action: Login
20140605T150946.912|3|Mychart:1 -- executing operation 'LoginQuery' of type 'search' on mbo 'ChartLogin' in package 'chart:1.0'
20140605T150946.920|3|Mychart:1 -- using username and password value from server context variables.
I am using a Rest Web Service, which takes input.
the service is working fine in the browser and Rest Client, but when I am calling this MBO, it is generating the above error.
How is this error comming?
How to Resolve this?
Regards,
Sravanya.Hello Midhun,
Yes, that is a data type problem. In my service is taking the noofrows in "INT" format.
This is my service,
/newconnection?noOfRows={noofrows}
when i created the MBO with this service it is taking the datatype of the "noofrows" in string format.
how to change that datatype to INT type?
Sravanya. -
I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.
Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424 -
I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you
Hi Ablondel24,
I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
First check the cache for the site:
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Second try to [[Delete cookies to remove the information websites have stored on your computer]]
Let us know if this solves the issues you are having. -
I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?
You won't be able to change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to correct your rescue email address for potential future use -
Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Installed Adobe XI Pro trial verison, when compared two pdf files it gives error "Expected a Name Object"..Can some one say how to fix this?
Installed Adobe XI Pro trial verison, when compared two pdf files it gives error "Expected a Name Object"..Can some one say how to fix this?
-
ORA-00600 how to resolve this error?
I was working on my Oracle 9i database and 6i form server. windows 2003
my server suddenly restarted and after that oracle showing the error ORA-01033: ORACLE initialization or shutdown in progress...
I try to resolve this error through this method. I received above mentioned error. please help how to resolve this error. ORA-00600.
C:\>sqlplus
SQL*Plus: Release 9.2.0.1.0 -
Copyright (c) 1982, 2005, Oracle Corporation. All rights reserved.
Enter user-name: sys as sysdba
Enter password :[password]
Shutdown Database
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
Startup Database (force)
SQL> startup force;
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-00600: internal error code, arguments: [kcratr1_lostwrt],[],[],[]..................There was an instance failure.
Then you did a clean shutdown using shutdown immediate
After that, was there any need for giving startup force.
Because that command starts up the database and shuts it down in abort mode, and then starts the database with an instance
recovery.
You should have tried a direct startup also before trying to attempt forceful startup.
*Startup force needs to be used with care.
For carrying out normal startup, simply typing startup will do.
Startup force is being used, when you want to refresh the already running database and facing issues like database showing errors while shutting down before starting up again.
Startup force actually, crashes the instance (just like shutdown abort) and then start your database normally. This do require instance level recovery.*
ORA-00600 are thrown when some internal errors happen. Ideally you should contact Oracle for metalink. For a first level step of troubleshooting, you can search in metalink
like what others said here. -
I have a Canon MG6120. When I start it I get error code 5050. Does anyone know how to resolve this?
I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
Solved!
Go to Solution.Hello gregg.
Please try the following to see if we can resolve your issue:
1. Turn the printer off.
2. Unplug the power from the printer for at least 5-10 minutes.
3. While unplugged, remove any paper from the unit.
4. Double check for any obstructions found in the unit or paper paths.
5. If no obstructions are found, plug the power back in and turn the unit on.
If the issue persists, the unit will require service for correction. We apologize for this inconvenience. Please contact our support group using the "Contact Us" option below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Maybe you are looking for
-
Every time I start the download process in iTunes, it stalls and nothing happens. I've tried restoring, and I've followed and tried all of Apple's instructions and directions but it still doesn't work. I do not see this specific problem addressed b
-
How to find Document flow / Relationships to a support message
Hi Friends, I am new to Solution manager. I would like to know how to find Document flow of a Support message. For example I have a Support message, there are few Change requests and tasks linked to it. This can be viewed from CRMD_ORDER transaction
-
Remove attachments from FITV_POWL_TRIPS for Expenses in overview screen
We are trying to remove the attachments from being available in the ABAP Web Dynpro ESS Travel/Expenses screens. In the My Trips & Expenses overview of the ABAP Web Dynpro - FITV_POWL_TRIPS - I believe - an ALV is displayed and one of the columns is
-
Getting New iPod. How to put already bought games on it.
I am returning my 120gb iPod classic to wal-mart. I just bought it yesterday so it doesent really matter. I plan to trade it in for another ipod classic as the click wheel stops responding for about 30 seconds once in a while and i know ti is not fro
-
Smart Album Face Name Do Not Find Names within UTF-8 Chars
I am using Photos Version 1.0 (209.52.0). OS X Yosemite version is 10.10.3. I didn't convert the library from iPhoto and I've created a new one. When I create a Smart Album with face name (even "Face is" or "Face includes" a name) with UTF-8 chars, (