Error/warning messages when trying to add a lookup field

I have gotten error and warning messages when I attempt to put a lookup field on a form. Based on a Municipality Code match in the Account table, I want to add to the form the Municipality Name from the Municipality Table.

After taking out a lookup field that was not looking up coreectly, I get this warning message and 3 simailar ones:
The referenced assembly "System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" could not be resolved because it has
a dependency on "System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" which is not in the currently targeted framework ".NETFramework,Version=v4.0,Profile=Client". Please remove references to assemblies not in the targeted
framework or consider retargeting your project.
I got this response on the message board:
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the issue is on ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum
THANKS.

Similar Messages

"clq: (C192716) I/O error." message when trying to add a quorum device

A little bit of history: Recently our storage folks migrated us from CLARiiON LUNs to VNX LUNs on all the shared disks. At the time, the cluster booted fine. However, since all the DID device IDs changed, we no longer have a valid quorum device:
<pre>bash-3.00$ sudo clq list
d11
host2
host1
bash-3.00$ sudo cldev show d11
cldev: (C727402) Could not locate instance "11".
bash-3.00$</pre>
When I try to add another quorum device I get the error shown in the title:
<pre>bash-3.00$ sudo clq add d41
clq: (C192716) I/O error.
bash-3.00$ sudo cldev show d41
=== DID Device Instances ===
DID Device Name: /dev/did/rdsk/d41
Full Device Path: host2:/dev/rdsk/c4t5006016B46E0574Ed0
Full Device Path: host2:/dev/rdsk/c6t5006016946E0574Ed0
Full Device Path: host2:/dev/rdsk/c4t5006016246E0574Ed0
Full Device Path: host2:/dev/rdsk/c6t5006016046E0574Ed0
Full Device Path: host2:/dev/rdsk/c8t5006016346E0574Ed0
Full Device Path: host2:/dev/rdsk/c2t5006016146E0574Ed0
Full Device Path: host2:/dev/rdsk/c8t5006016A46E0574Ed0
Full Device Path: host2:/dev/rdsk/c2t5006016846E0574Ed0
Full Device Path: host1:/dev/rdsk/c2t5006016846E0574Ed0
Full Device Path: host1:/dev/rdsk/c8t5006016A46E0574Ed0
Full Device Path: host1:/dev/rdsk/c2t5006016146E0574Ed0
Full Device Path: host1:/dev/rdsk/c8t5006016346E0574Ed0
Full Device Path: host1:/dev/rdsk/c4t5006016246E0574Ed0
Full Device Path: host1:/dev/rdsk/c6t5006016046E0574Ed0
Full Device Path: host1:/dev/rdsk/c6t5006016946E0574Ed0
Full Device Path: host1:/dev/rdsk/c4t5006016B46E0574Ed0
Replication: none
default_fencing: global
bash-3.00$</pre>
Another issue we are having is that all the shared disks are showing "failed" for their status:
<pre>bash-3.00$ sudo cldev status d41
=== Cluster DID Devices ===
Device Instance Node Status
/dev/did/rdsk/d41 host1 Fail
host2 Fail
bash-3.00$</pre>
The old CLARiiON devices had array failover mode of 1 and the new devices have array failover mode of 4. Anyone know if that is an issue? I have MPxIO disabled in the fp.conf file.
Any assistance would be greatly appreciated.

Here's an update: Had the storage group change the failover mode on the VNX LUNs to mode 1 and everything was happy. All the disk are in the Ok status and I was able to replace the quorum device. Not sure if the C192718 error was due to the status of the disk or the array failover mode...

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

I continue to get an error message when trying to add Header

I continue to get an error message when trying to add Header & Footer. Therefore I am unable to add page numbers to my pdf. Help!!

Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

Bizarre error message when trying to add BT Vision...

I am getting a bizarre message when trying to add BT Vision to my BT Infinity broadband which is due to install on Thursday. I'm hoping it is only due to the fact the order has not completed and will be fine in a week. I did speak to an "advisor" but I helpfully was told the line cannot be checked until the current order is complete and I'd obviously want to know if there will be any problem with me getting BT Vision prior to that!
Has anyone else seen this error message and have any advice? Note that I am definitely not in any trial and the 0800 number is now dead.

Hi Evil_Dan,
Welcome to the forum.
If you can email in your details we'll check this, you can get our "Contact Us" link by clicking on my profile page.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Getting an error 1 message when trying to restore iPad. Any suggestions?

Getting an error 1 message when trying to restore iPad 2. Any suggestions?

I too am getting the same error message. Along with "We Could not complete your itunes store request. The network connection was refused make sure your network settings are connected and your network connection is active"....im posting on this forum so how is my network not connected?
I am using the OSX Mountain Lion 10.8.3 on an iMac

HT201210 I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?

I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?

Did you manage to fix the issue?
I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update!

Error message when trying to add new user

Hello,
Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
They are working on this database since 2009.
No upgrade was recently done.
when trying to add a new user they get athe following error:
"A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
Could you please advice.
Regards,
Maya

Hi Maya......
Go to Administration--> Utility and select the restore no. series.
Update this and try to add User.
But do it first in your test DB.....
Regards,
Rahul

Get error 7 message when trying to open iTunes in windows vista

All of a studded my windows vista 64 bit computer will not open iTunes. It has a error 7 message. I have tried removing it according to supports instructions with no luck. One problem that I had is that it told you to delete the iTunes folder in the common files and it would not let me do that but everything else deleted.still no luck when I reinstalled, any help would be appreciated. I also tried updating the net framework, no luck.
Thanks in advance,
Karlluch

Karlluch...
Try here > iTunes for Windows: "Error 7" message when opening iTunes

Error message when trying to add a printer -50?

I'm using an HP LaserJet 2100M, connected to my iMac G5 with a JetDirect 610 networking card through the ethernet port.
Usually it works, but now when I've tried to reset the printing preferences (often necessary to get it to work) and go to choose a printer, I get an error message: "An error occurred while trying to add the selected printer.....error -50."
I've tried restarting, and using the disk utility, but it says nothing needs to be repaired. Anybody have any suggestions? Do I have to reinstall, or will any updates help? I'm using 10.4.3
thanks

Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
The supplied HP C3180 drivers will not work when the printer is connected to an Airport base station.
iFelix

Error message when trying to add item in change BOM goup

Hi I went to transaction cs05,and trying to add item to specific material with BOM group,an error message popped up and saying assign the item to an alternative,what does it mean? How to solve?

Hi,
A finished material can have multiple alternative BOMS which can be stored in a common BOM group number. CS05 is used to change these multiple boms.
When you add a new item in CS05, system will ask - to which alternative bom the new item should be assigned and that's how you are getting this message. For example, if in a bom group you have 3 differnet alternatvie boms for a FG material, when you add new item in CS05, you will see 3 checkbox at the right hand side of the screen. If you want to assign new item to all the three alternative BOMs , than select all the three check box and save.
Regards,
Ravi Thakkar.

Error message when trying to add printer

First my DeskJet 1125c wouldn't print then I got my fathers old deskjet 845c which worked for a few days. Now that doesn't work either and when I try to add a printer, I get an alert box with this message:
"An error occurred while trying to add the selected printers.
"server-error-service-unavailable."
So now I can't print from any of my two HP printers, DeskJet 845c or Deskjet 1125c.
Please advice
Best regds
PB G4 Mac OS X (10.4.9)

http://docs.info.apple.com/article.html?artnum=107054
You could use Printer Setup Repair from www.fixamac.net to help fix that, too.

What do i do when i get an error 2330 message when trying to update to the new itunes?, what do i do when i get an error 2330 message when trying to update to the new itunes?

What do I need to do when I go to download the new iTunes i get an error message 2330? And when I try to delete all the iTunes and other things that has to do with iTunes it will give me the message again?

Running iPhoto 9.4.3 under OS 10.8.4 "being updated" message when try to open the Application
Sounds like iPhoto is trying to update the library or thumbnails. Do the following: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Error 13 message when trying to addd Canon printer

We have a Canon IP2000 USB printer, which we have been using with our Imac for about 8 months. Suddenly we got a failed communication message and it would not print anything. The printer still works when connected to my ibook and it did still print test sheets. We have tried numerous things without success.
We have now uninstalled it and tried to reinstall but Printer setup utility now locates the printer but then comes up with a message saying unable to add printer error 13.
It is very frustrating being unable to print.

Generic print fixes - do these one at a time. Restart and try adding after.
Delete and re-ADD the printer(s) in Printer Setup.
Repair permissions (Disk Utility).
Delete Print Prefs - search for (File>Find) files that start with com.apple.print and delete them all and reboot.
Reset Printing System (new in Tiger) - In Printer Setup, click this menu item found just above Quit Printer Setup.
If there is a downloadable Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD.

Error/warning messages when trying to add a lookup field

Similar Messages

Maybe you are looking for