Error when changing PO quantity through me22n Tcode.

Hi SDN
When i try to change PO quantity through me22n Tcode. I am getting the following popup message as. 'No update of sales order xxxx from purchase order'. So can anybody guide me to rectify this error.
Thanks in Advance.
Basha

Dear Baji,
You might created this PO with the reference of the sales order so the system is telling that the quantity update will not happen for sales order at PO level you need to Update the quantity at Sales order level.
Regards,
Murali.

Similar Messages

Avoiding concurrency errors when updating a database through AJAX

What are some strategies for avoiding concurrency errors when updating a database through AJAX. That is, in cases where a given user could attempt to modify the same row in the database with simultaneous requests (say, that he updates one column with information with an AJAX call, then immediately submits a form that updates the same row), what are some good ways yo prevent the two updates from colliding? On the JavaScript side one might make the AJAX call synchronous, but I question whether that is the best way to do it. Has anyone else confronted this?

Well, since no one seems to have any ideas so far, I'll throw in my two cents worth.
I'm not too familiar with AJAX so my advice may be limited.
I suggest you do a google search on Optimistic concurrency database to get some ideas on how to handle it.
If your update/insert/delete query is thread safe, then even if the same user double clicks the button fast enough to immediately have another update to the same record, then the first update will complete before the second one is carried out. Therefore no harm is done since he is just updating the same record. Since a typical update/insert/delete takes only a few milliseconds (querying may take a lot more time), its not likely he can click the button that fast. (I assume your using connection pooling for speed).
The trouble comes up when two people call up data from the same record in different browsers. The first one updates/inserts/deletes the record. Now the other user is looking at old data. When he updates/inserts/deletes, there is a problem. One way to handle this is to keep a copy of all the fields from that record in each user's session scope when they first fetch it from the database (example: oldName). Then when you go to update some time later, to this:
sql= update person set name=newValue where personID=3344 and name=oldName
Note oldName is from session scope.
If name in the database has changed, the update will not occur and will return 0 records updated. If it didn't change, it will update.
Note your update function should not throw an exception if it cant update, it should return false. Return true if it worked.
Example: public boolean updateName(String name)
Similiarly, your insert should not throw an exception if the record already exists, it should return false meaning it cant insert.
Exaple: public bolean insertName(String name). Same thing with delete function.
If a record cant be updated due to someone else updating the record while the user was looking at data, return a message that it wasn't updated due to that problem. Then show the user the new value in the database ask him if he wants to overwrite the new change.
Note even if you show 100 records on the JSP, only update the ones that have changed and not all 100. This way, its not likely he has updated the same records someone else has altered. Less likely a colision compared to updating all 100.
If your updating/inserting/deleting more than 1 record (say, 3), then you should look into setting up a transaction in addition to all the above and rolling back all of them if one fails.
Reading the section on databases from http://www.javapractices.com/home/HomeAction.do may also help.

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

Error when changing a Scheduling Agreement

Hello experts,
When we change the quantity of an scheduling agreement in VA32 the error Update cancelled apperars. In ST22 there is a DUMP "The ABAP/4 Open SQL array insert results in duplicate database records".
We have already implement the SAP note 1484401 but the error still remains,
Can anybody help me?
Thanks
Laura

hi,
this is an SQL error:
in your case, this comes when already a scheduling agreement is there and system is trying to re enter the same number in data base.
please check with an ABAPER and DEBUGG IT to solve it.
balajia

Error when importing Shared Dimension through LCM

We are using Hyperion Planning 11.1.1.3 with an EPMA application. We have one environment where all of the dimensions are in the Shared Library, and the application dimensions are shared from there (DEV environment). In another environment, we have the same application, but its using only local dimensions (UAT environment)
We are looking to migrate some changes to members from DEV to UAT, but don't want to share the dimensions in UAT (yet anyways). Here is how I was going about migrating the dimensions:
1. In Shared Services in DEV, exporting the dimensions from EPM Architect from Foundation Services (from under Dimensions (Shared))
2. In Shared Services in UAT, importing the dimensions from the file system into EPMA from Foundation Services (into Dimensions (Shared)), then using the "Synchronize > From Shared Library" to push those changes to the application's local dimensions.
When I import the file system from DEV into UAT, the import fails and gives me the following error message for the Account dimension (only trying the one dimension for now):
REPORTED WITHOUT ERROR DETAILS
Here is a link to the screenshot of the error: http://dl.dropbox.com/u/12604803/HSS-LCM-Error.jpg
It appears that the LCM import does work as it creates the dimension in the Shared Library, but I am not sure why I am getting this error message.
I also tried to import the exported Shared Dimension for Account directly into the application (rather than the Shared Library) by just moving the "Account" file from:
<export file name>\resource\Dimensions (Shared)
to
<export file name>\resource\Application Metadata\Planning Applications\<appname>\Common Dimensions
And this imports without any errors! I'd rather not go this way as it's more of a manual process, and I'd like to keep it as straightforward as possible.
I have searched the error message on OTN, the Oracle Knowledge Base and Google, but haven't really been able to come across any real information.
Any insight you may have would be greatly appreciated!

More of an update. We have a sandbox environment as well, and I was able to import the Shared Dimensions through LCM without any issue on that server.
I also tried rebooting the server with the issues, but still get that cryptic error message.
I looked through the logs and saw this in the EPMA.log
2011-03-31 15:51:13,194 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.hyperion.awb.web.lcm.ArtifactManager - Error code is AWB_WEB_ERR_LCM_IMPORT_ARTIFACTS_PATHNAME
2011-03-31 15:51:13,194 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.hyperion.awb.web.lcm.ArtifactManager - doImportArtifacts: Error importing 'Account' at path '/Dimensions (Shared)'
Seems to be connected to the issue I am having, but couldn't find anything on OTN, Oracle KB or Google. Other imports to this environment work, so not sure why the pathname would throw issues.
I also verified that EPMA and HSS on all environments are using the same version.

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

My login is showing server error when tryinng to login through my application

Server Error in '/' Application. Failed to generate a user instance of SQL Server due to a failure in copying database files. The connection will be closed. Description: An unhandled exception occurred during the execution of the current web request. Please
review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error: The connection string specifies a local Sql Server Express instance using a database location within the application's
App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence
of the application services database and automatically create the application services database: If the application is running on either Windows 7 or Windows Server 2008R2, special configuration steps are necessary to enable automatic creation of the provider
database. Additional information is available at: http://go.microsoft.com/fwlink/?LinkId=160102. If the application's App_Data directory does not already exist, the web server account must have read and write access to the application's directory. This is
necessary because the web server account will automatically create the App_Data directory if it does not already exist. If the application's App_Data directory already exists, the web server account only requires read and write access to the application's
App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the application's App_Data directory. Revoking read access on the App_Data directory from the web server
account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the
web server account's credentials are used when creating the new database. Sql Server Express must be installed on the machine. The process identity for the web server account must have a local user profile. See the readme document for details on how to create
a local user profile for both machine and domain accounts.

Hi migold,
As other post, please help to post more details for analysis.
Based on my research, the error “Failed to generate a user instance of SQL Server due to a failure in copying database files” is usually caused by that User Instance is set improperly. Please check for the existence of the "User Instance=True;" in
your connection string, if it exists, change it to "User Instance=False;". For more details, please review the following blog.
http://blog.benhall.me.uk/2008/03/sql-express-error-failed-to-generate-a-user-instance-of-sql-server/
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Error when executing DBMS_ERRLOG pkg through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
it throws the following error...
ORA-01031: insufficient privileges
Please let me know the solution at the earliest.
Thanks.
-Saravanan

duplicate post
Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

Changing Purchase Order through ME22N

Hi,
We are experiencing a problem with the following cenario:
The PO was created in environment with a purchase requisition,a agreement and it was already some subsequent documents then this PO was migrated to another environment but only the PO. I mean the Purchase Requisition, the agreement and also the subsequent documents were not migrated to the new environment.
We need to change the quantity of this PO but when we try to save the new quantity it says that the agreement do not exist. And when we try to remove the agreement and the purchase requisition the system do not allows, the fields are closed to edit.
Is there a way to remove this relation between the PO and the Purchase Requisition and the agreement to edit the quantity of the PO item?
Thanks,
Rafael

Thanks for you answer.
Now I have another doubt, if we have the purchase requistion and the agreement removed from the EKPO table, would we be able to modify the PO item quantity? Even if we already had a partial goods receipt?
Thanks,
Rafael

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Facing an error when change the sysadmin password

hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjan

Hi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards,

Error when changing PO quantity through me22n Tcode.

Similar Messages

Maybe you are looking for