Error when compiling AppleScript for CS2, need help
I've recently started learning AppleScript, and while I'm no stranger to programming I'm a little lost when it comes to errors like this one. I have both InDesign CS2 and InDesign CS3 installed so I'm not sure if my problem is caused by that, they were installed before I started working on this mac. I've also been recently upgraded from Tiger to Leopard, in case that might be a probable cause.
Basically, my problem stems from this:
tell application "Adobe InDesign CS2"
get active document
end tell
When I try to compile this I get a Syntax Error that says "Expected end of line but found class name." and highlights "document". I've also had problems trying to use things like "page 1" or "view preferences" with similar errors. With the case of things like "page 1" I've had to replace it with "item 1 of pages" to get it to compile.
If I change it to "Adobe InDesign CS3" it works fine, but I need to compile for CS2 for backwards compatability. Strangely, this method works:
set indesign to application "Adobe InDesign CS2"
tell indesign
using terms from application "Adobe InDesign CS3"
get active document
end using terms from
end tell
Does this mean my CS2 dictionary is broken? I can view it fine from the Script Editor, and I've seen things like "active document" used in example scripts, so this syntax error is confusing me.
I'm not sure why you're getting that error, but a couple of things:
Using "document 1" instead of "active document" is not a bad habit,
because there are cases where active document doesn't work.
When you compile the scripts, the version is somewhat irrelevant -- when
you go to run them, they look for a running application of the same creator
code, and use that. It's a bit like when you double-click on a document in
the Finder -- it doesn't matter what version of ID you made it in, it will
try to open in whatever version is running first.
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro
Similar Messages
-
Typedef Error when compiling niScope for DLL using CVI
I am getting the following error when trying to compile a DLL for the NI 5122 digitizer using CVI:
Error creating type library:
All structs, unions, and enums required by exported functions must be typedefs in order to create a type library. The struct/union/enum "niScope_wfmInfo" does not use such a typedef.
I have created a variable and "typedefed" it as niScope_wfmInfo to try and get rid of this error. This did not work. I have tried making several other changes. Some have eliminated the error but created problems with the DLL.
Has anyone had a similar error to this? If so, how did you get around it?
Thanks,
HeatherHi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick -
Error when compiling code for crio 9068 using LV 2014 SP1
I have a project that was mostly developed in LV 2013 SP1. I recently upgraded to LV 2014 SP1, and I can no longer compile the FPGA VI. At first, I received an error stating that the Xilinx Vivado 2013.4 compilation tool was not installed. I found this tool on your site, downloaded it, and installed it on my computer. When I try to compile now, the compilation advances to a certain point, seems to hang there for a while, and then returns an error stating that toplevel_gen_propImpl.xds cannot be accessed "because it is being used by another process." I have repeated this exact same scenario on both by desktop and my laptop. I've attached a PDF of the error I windows I have received.
Attachments:
compile_error.pdf 114 KBHi scg,
I took a look at your file and researched a little bit about your issue, I have not been so lucky with the research since most of the doceuments are related to previous versions of the software, nevertheless it is also what makes me think that the file might be corrupted or some issue related to it so and I have found some tests that you could try:
1. Create a new FPGA file with your code on it and compile it again.
2. Turn off the firewall and compile again
3. Restart the compiler Services
Hope you might find this information helpful!
Regards,
S.Jimenez -
ERROR:HDLParsers:3370 Compile Error when compiling for NI-5640R
I'm trying to get a FFT Core working inside the NI-5640R FPGA. In my latest debugging step, I have received the following error when compiling:
Compiling vhdl file "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" in Library work.
Entity <bushold> compiled.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 142. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkMaxWidth.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 143. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkCounterWidth.
Has anybody seen this before? I am including my FPGA VI that is causing this error (FFT (FPGA).vi). I am also including my previous step in debugging the FFT that worked (FFTworking (FPGA).vi).
Attachments:
FFT (FPGA).vi 125 KB
FFTworking (FPGA).vi 119 KBHi,
The main cause of this error message is the large array size. You configured a 16-bit fixed-size array with 4096 element for a total array size of 65536 (16 * 4096). Array uses a lot of FPGA resource and the general recommendation to limit the use and size of array as much as possible on the FPGA VI. This VI will certainly overmap the FPGA resource because of the large array size.
Although this error message is not directly related to the array size, it has however been reported to R&D (#4G3COBJ0) for further investigation. A possible workaround would be to reduce the size of the array or use DMA FIFO to pass the data to the host.
Thanks for the feedback!
Tunde A.
LabVIEW FPGA -
I'm trying to use the HDL interface node in LV8 FPGA with a PCI-5640R and had the "timing constraint" error when compiling my VI, however, the same VI was successfully compiled on a CRIO-9104, it seems the FPGA on PCI-5640R is not good as the one on CRIO-9104, or I'm not using it right. could you please kindly help me out?
I tested it with the sample code downloaded from NI website
( http://zone.ni.com/devzone/conceptd.nsf/webmain/456722DDDE17986A86256E7B0065EE6F ) which demonstrates using an IP core for a filter. To simplify it, I only keep the HDL Interface Node and the While Loop (see "UsingFilterCore.vi" in attached zip file), and then I created 2 projects including this VI (1 for CRIO-9104, in sub folder "CRIO-9104", the other for PCI-5640R, in sub folder "IFRIO 5640"). When opening the 2 projects separately in LV8.0 and selecting the VI for compile, the one for 9104 passed and the other failed. Here I attach the source code, error message screenshot and the NIReport from MAX, hope you can reduplicate the problem.
Can you help me out? Thanks very much !
Message Edited by Jerry_L on 03-26-2006 09:28 PM
Message Edited by Jerry_L on 03-26-2006 09:29 PMHi Jerry,
I'm just tried to make all these steps by myself (http://zone.ni.com/devzone/cda/tut/p/id/3516). I have generated FIR filter using Xilinx ISE and got *.VHD file which was going to use in HDL Node.
In the Parameters tab of the HDL Interface Node configuration dialog, double-click in the Names column to add parameters. Create parameters as shown below.
Next, switch to the Code tab. Notice that your parameters now appear in the entity section. To complete the next two sections of code, you will need to refer to the filt.vhd file that you generated earlier and interface the filter core to the LabVIEW FPGA execution system.
1. The first problem I met was integrating VHDL code from earlier generated *.VHD file to CODE tab in properties of HDL Node. Content of entity section in *.VHD is not the same that in your attached file. Please check it in attached files. I'm sure this is the main reasen of problem.
Next, switch to the External Files tab. Click the Add File button and select the filt.edn file that you created earlier. This is the EDIF netlist file that you generated earlier.
2. I have no idea where can I get it and when during filter generation using Xilinx ISE it was generated too. How can I get it? I had to use your attached file filt.edn.
3. After that I have made the same schematics like you have in your VI FPGA and try to run. But I've got two error messages:
HDL Interfave node: enable chain not handled. Details: Refer to the documentation for the correct assignments for the enable_out output from your HDL code.
HDL Interfave node: output not handled. Details: Right-click the node, select Configure to open the Configure HDL Interface Node dialog box, and use the Code tab to handle all output parameters.
Actually I need to model FIR filter:
Bandwidth 200-600 Hz
Sampling 8 KHz
Attenuation 80 dB
That's why I tried to follow all these steps by myself to understand how does it work.
Thanks a lot.
Nikita
Attachments:
Filter1.vi 16 KB -
Pragma error when compiling with SDK X
Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
MagdaWithout seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378 -
Errors when compiling the web service (SAP Web Service Design Tool)
After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PMHello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip] -
Error in compiling swf for Flex 2 application
Hello experts!
After applying SPS 7 for EHP1 7.0 I am receiving the following error when deploying my model.
Error in compiling swf for Flex 2 application. The log is appended below.
I realized the error only occurs when I use value help.
Can anybody advise please.
Thanks,
Ibrahim
Error in compiling Flex application: /usr/sap/QJB/JC01/j2ee/cluster/server0/GUIMachine_Business_Packages/[xxx]MyModels.QM.Tab_test/FLEX_COMPILATION_FOLDER/AAD3KX_P.mxml(17): col: 145 Error: Element type "vc:LabeledDropDown" must be followed by either attribute specifications, ">" or "/>".
<vc:LabeledDropDown comboHeight="16" width="200" labelField="text" selectedIndex="{VC.getEnumIndex(AXCWV1, AAA3L21.Current.SELOP_TYPE || "BT", 'value')}" valueProperty="SELOP_TYPE" valueObject="{(AAA3L21.Current)}" id="ACA3L21_DropDown1" dataProvider="" comboComponent_y="40" prompt="" label="{(Languser1.BhlfcdeBHckjkGcInkHE)}" comboY="40" visible="{DE.NOT(false)}" creationComplete="AXCWV1.addEventListener(InfosetEvent.DATA_REFILLED, selectDefaultACA3L21_DropDown1)" component_x="88" x="8"/>
Edited by: Ibrahim Ibrahim on Apr 15, 2011 1:19 PMWe have solved this by applying note: 1510453 - Certain default values in list-based controls causes error
-
.class expected error when compiling
Ive been getting this frustrating error when compiling. My program is essentially supposed to add the values in two matrixes and return a new matrix using the added values
Heres my code:
public Matrix add(Matrix comp)
int[][] temp = new int[this.numRows()][this.numCols()];
for (int a = 0; a < comp.numRows(); a++) {
for (int b = 0; b < comp.numCols(); b++) {
temp[a] = this.myCells[a][b] + comp.getVal(a, b);
Matrix addedMatrix = new Matrix(temp[][]);
return addedMatrix;
heres the constructor for Matrix object:
public Matrix(int[][] mat)
int[][] myCells = new int[mat.length][mat[0].length];
for (int i = 0; i < mat.length; i++) {
for (int j = 0; j < mat[0].length; j++) {
myCells[i][j] = mat[i][j];
}getVal, numRows, and numCols are all helper methods that just return values.
The error is '.class' expected in the line which says Matrix addedMatrix = new Matrix(temp[][]); I checked for extra brackets but there dont seem to be any.
Any help would be appreciated. Thanks.I think you just needMatrix addedMatrix = new Matrix(temp);
-
Revision: 10641
Author: [email protected]
Date: 2009-09-28 08:44:38 -0700 (Mon, 28 Sep 2009)
Log Message:
Fix ambiguous reference error when compiling a performance test.
Fully qualify mx.events.Requests in generated code for FlexInit.
QE notes: None.
Doc notes: None.
Bugs:
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.javaStart by validating your HTML code. You have numerous code validation errors on line 230 caused by UPPER case tags. XHTML doc types, need lower case tags. After you fix your code errors, republish your page.
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
Error when executing statement for table/stored proc
Hi All,
I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
In my stored procedure I have three insert statements to insert rows in to 3 tables.
This stored procedure is working fine for two insert statements i.e,
For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
<i><b>Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
<i><b>Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error</b></i>
Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
<i><b> Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.</b></i>
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
MurthyHi narasimha,
This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati -
Error when loggong on for external ID "": Error during SAML 2.0 logon
Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding: POST
N SAML20 IdP Name: http://xxxxxx/adfs/services/trust
N SAML20 Status Code: urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c 16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c 16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c 16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c 16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>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</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ -
Error when trying to launch iTunes! Help!
Hi!
I've tried to seek through the forums to find someone with the same error, but i haven't found anyone.
Here's the problem:
When i try to launch iTunes I get a Windows Error saying that iTunes har encountered a problem and has to quit. It's that kind of error where you can send an error-report. And when I try to restart Windows, I get the same error when I log on. Please help! I've tried to reintall and repair iTunes, but it won't help.
iPod Mini Windows XP Pro Sygate Personal Firewall Pro, F-Secure Antivirus 06hi
I had this same problem for ages and tried all sorts
of things. I think the problem was Quicktime
actually, but what eventually worked was:-
Uninstall itunes, then reboot. Close the Quicktime
program tray icon (lower right corner of taskbar) and
uninstall Quicktime. Then install the standalone of
Quicktime before installing itunes again.
Hope this helps.
Thanks!
I'll try it out! Havent't thought of that.
Will come back to say if it worked. -
Method not found in class errors when compiling project
Hi,
I am getting the following errors when compiling my project:
Error(3,8): ReqLinesNotificationsVORowImpl not found
Error(25,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(31,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(37,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(43,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(49,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(55,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(61,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(79,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(85,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(91,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(97,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(103,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(109,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(115,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(121,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(127,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(133,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(139,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(145,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(151,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(157,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(163,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(169,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(175,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(181,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(187,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(193,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(199,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImplError(205,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
I have ReqLinesNotificationsVORowImpl and ReqLinesNotificationsVOImpl files in myprojects directory. Can anyone help please?
ThanksHi,
From the error it seems that the code is refering ReqLinesNotificationsVOExRowImpl file.
Please make sure that its class file is present in myclasses folder.
Since u have mentioned that ReqLinesNotificationsVORowImpl is already placed in myclasses folder. Hope this should resolve your issue.
Regards,
Raj Papdeja -
Error when creating files for transport request SAPK-700BGINPLMWUI
Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj
Maybe you are looking for
-
Invalid security code for iphone 4
I'm not sure if I am posting in the correct area of this page but oh well. I recently received a iphone 4 from my husband. And after having the phone for one week, I could not download any apps to my phone because of billing info or invalid security
-
Somehow the settings changed so the search results page has text so small that I can't read it
when I launch firefox the initial page is find. I type in a search phrase, and the search results page comes up with print so small I can't read it. I can't find any way of changing the "view" of the results pages.
-
Need to add a filter to imported SQL
I used the File\Import-SQL menu option to import an existing query from another application. The query runs and creates a results table. I do not see an option in the Query\Request section to add a filter so that the user can select a range of values
-
I want to use the Siebel CRM in module offline, but every time I try to make the transfer of data, errors occur. How do I solve this problem? Already disable the Antivirus and firewall of Windows. Follow the link of errors Process ok: http://byfiles.
-
My computer looses the printer drivers every so often and some times they come back? is there something i can do or stop doing? i can print one day and then it may be quite awhile before it will print again? johnny