Error when Parking G/L Account Document for Ledger Group

Dear Frds,
When my client try to park document for General ledger group (T-Code: FV50L), he is getting the error like CHECK_PLANTS_ABRO with the message No # FF804.
Can anybody guide me what is this regard..
Regards,
Laxma

Do one this items:
1. Refer Note. 904036
2. Check your configuration in terms of plants, company code, company name. Something might have been missing.

Similar Messages

  • FB50L - Enter G/L account document for ledger Group

    Dear all,
    Can anyone explain what is the use FB50L - Enter G/L account document for ledger Group?
    Will award good points.
    Thanks & Regards,
    AR

    if the company having parallel ledgers, posting of entries in one particular ledger using  FB50L and FB0 , in parallel ledger concept if u post any entry all ledgers will be updated. this facility available in ECC 5.00 and 6.00 versions.
    if u want further information relating to parallel accounting refer the link
    http://help.sap.com/saphelp_erp2005vp/helpdata/EN/2d/830e405c538f5ce10000000a155106/frameset.htm
    please assign the points if its useful

  • BAPI to park G/L Account document with ledger

    Hi Experts,
    I have been looking for BAPI to park G/L account document with ledger (FV50L).
    Can you please let me know, if you have know about it.
    I have found the one for posting BAPI_ACC_DOCUMENT_POST, but It should not be used in our case.
    It is park G/L account document without ledger.
    Thank you in advance.
    Kyongkeum Im.
    Edited by: Kyoung Keun Im on Aug 13, 2010 1:11 PM
    Edited by: Kyoung Keun Im on Aug 13, 2010 1:12 PM

    Hi,
    There is not function module for that. I am using BDC to park GL document. For BDC parking you can use Function module -
    POSTING_INTERFACE_START and POSTING_INTERFACE_DOCUMENT.
    Sample Logic:
    Loop at header.
    populate header.
      loop at item.
       populate item.
      endloop.
    call function POSTING_INTERFACE_START
    call function POSTING_INTERFACE_DOCUMENT
    call function POSTING_INTERFACE_END
    BAPI COMMIT.
    Endloop.

  • Error when releasing billing to accounting document

    Why we tried to release the billing to accounting document. There is the below error.
    Could someone please kindly help?
    Message Identification: F5
    System Message Number: 358
    Output type: E
    The Diagnosis is 'This document refers to a document which contains an invoice reference.
    The Procedure is 'Enter a different document as the invoice reference'.
    Thanks,

    You might be creating the billing document for a flow where there might be original invoice and/or credit memo also.
    So check that the original invoice and/or credit memo has an invoice reference to itself (i.e. the invoice reference = the accounting document number) than there is an incorrect referencing.
    Remove this reference via FB02 in the original invoice and/or credit memo and it should work
    Regards,
    Gaurav

  • Error creating accounting document for a credit note

    Hi All,
    I am facing an issue while creating an accounting document for the credit note created.
    The scenario is as follows:
    Created a credit memo --> created credit note --> create accounting document
    While creating accounting document, i'm getting an error message as 'The G/L account XXXXXXXX requires an assignement to CO object'.
    Please let me know why i'm getting this error and how to overcome this issue.
    Thanks,
    Anil Kumar

    While creating accounting document,
      i'm getting an error message
    First of all, I am not clear on your above statement as in normal circumstances, once you generate a credit memo, in bacground an accounting document will also be generated.
    In your case, I believe while saving the credit memo, system throws the error to maintain CO object in which case, do the following:-
    Go to TCode KA02 enter the controlling area, give the G/L acoount No and click on Master data tab.  There  select  "Default Acc Assgmnt" tab  and enter Cost centr and save.
    Next Go to FS00, input the G/L Account and click on Edit Cost Element on top.  There click on Basic Data and for the field CElem category, maintain the required numeric value.  Now select the tab Default Acct Assgnmt and there maintain the required cost center and save.
    thanks
    G. Lakshmipathi

  • Error in accounting document for Billing - Costing Key does not exist

    Hi,
    We had activated COPA for updating Record Type - A (Sale Order) and Record Type - F (Billing Document).  Subsequently we have removed all the settings done for Record Type A (Sale Order) including Costing key.
    Now after this change we get the error of "Costing Key XXXX does not exist" during generation of accounting document for Billing.
    Can any body suggest how to over come this error without creating costing key of Record Type A (Sale Order).
    Regards,
    Ela.

    Hi Ela,
    Please use T. code KE4J and remove Costing Key from record type F( Billing) then system wonu2019t look for Costing key during releasing billing document to accounting & use T. code KE40 to correct Costing key settings  if required.
    Regards,
    Shailesh Verma

  • Work around to force trigger Accounting documents for Billing documents

    Hi All,
    I have an issue very similar to:
    [Accounting Document not posted for Cancelled Invoice -error in FI interface|Accounting Document not posted for Cancelled Invoice -error in FI interface]
    The invoices number range were changed recently and few documents created during that time range did not create the accounting documents. Now, if I try VF02-> ReleasetoAccounting, it says:
    "Incorrect doc.no.: 98020923. Select document number between 3000000000 and 3999999999."
    Is there a workaround here to re-trigger the accounting documents for these Cancellation documents(Type S1)?
    I've also tried cancelling them, but I get the below error message:
    "For billing type S1, no cancellation billing type is maintained"
    I've found a few hits when i searched the forum but none talked about a workaround.
    Any help would be appreciated.
    Thanks,
    Tabraiz

    Hi,
    Thanks for the reply. I've checked the note, it states the below steps for the solution:
    1) Implement Notes 331771 and 363717 first if they are relevant for your release.
    2) Implement the attached program corrections
    3) Branch to Customizing of the billing document types and enter a cancellation billing document type for the affected billing document type of the cancellation document itself.
    I was wondering if only the step 3 will be enough to cancel the cancellation invoices. I am still not sure what is the significance of point (2) here.
    I haven't implemented a SAP note so far, have you encountered this problem, and have you implemented the whole three steps?
    Thanks,
    Tabraiz

  • Accounting document for Excise Invoice

    Hi,
    Accounting Document generated for Excise Condition types.We do not want to generate Accounting document for Excise Invoice.
    We have marked the Excise Condition types JEXP,JECP,JA1X as Stastical in Pricing procedure & also not assigned the Account Keys for the same.
    How to make other settings for non generation of Accounting document for Excise Invoice.It's a Domestic scenario.
    Please suggets.
    Thanks & Regards,
    Hemant PAtil

    Hi,
    Instead of creating the Excise Group i have created the Sub Trasaction type (DS) ETT Type DLFC.
    In SPRO Specified the Excise Account per Excise Transaction DLFC & DS.
    Also Specified G/L Accounts per Excise Transactions.
    Excise Grp (P2),ETT (DLFC),Company Code (MU51),Chart of Accts(XXX),all the G/L Accounts kept BLANK.
    While creating the Excise Invoice thor.J1IIN,if i put Sub Transaction type DS then the system gives the following error.
    Excise modvat accounts not defined for DLFC transaction and  excise group
    Message no. 8I402
    Please suggests.
    Thanks & Regards,
    Hemant Patil

  • Unable to create Accounting document for my Outgoing excise Invoice

    Dear All,
    I am implementing sales from Factory. I am unable to creat accounting document for my Outgoing excise invoice.  When I click the Utilization button, The excise invoice type is selected Deemed.
    1. How to control which Which Excise invoice type should be selected in J1IIN.
    2. For Deemed exports will system not genererate Accounting document for Excise Invoice?
    3. Where to view the excise invoice document types (Like Billing and order types)
    Thanks & Regards

    For deemed export sales,
    -Accounting documents will not get generated. (ref: Excise Acct Determination in CIN settings, you will not find Excise Tranraction type:ARE3 for which G/L account will not be assigned)
    -Excise Invoice type will be automatically triggered based on configuration : Excise Group / Series Group detetermination.
    - For Deemed Exports , only Quantity will get updated in RG1, but not the value. thats the reason, accounting document will not get generated.
    - This excise invoice is created, for - to update the RG1 registry / ARE3 creation.
    hope it clears
    regards,

  • Adobe Reader error when downloading a Form (IMM5257E - required for CIC - Canadá)

    I received an error when downloading a file viwh the Adobe Reader version 11.0.07.
    A message like this appear:
    To view the full contents of this document, you need a later version of the PDF viewer.

    Pat Willener!
    GREAT THANKS! GREAT THANKS! GREAT THANKS!
    I was using Google Chrome, and did not suspect that this could be the
    problem.
    I used I.E. and the download worked. So that's it.
    Great thanks again.
    Vilson Drehmer
    Rua Balduíno Pedro Vier, 693
    CEP 95.880-000 - Estrela - RS
    Fone: (51) 8401.2253
    E-mail: [email protected] <[email protected]>
    CRA-RS 6364
    2014-05-28 5:26 GMT-03:00 Pat Willener <[email protected]>:
        Adobe Reader error when downloading a Form (IMM5257E - required for
    CIC - Canadá)  created by Pat Willener<https://forums.adobe.com/people/pwillener>in *Adobe
    Reader* - View the full discussion<https://forums.adobe.com/message/6414530#6414530>

  • Error when generating IDoc from MC document - workitem to all the SAP users

    A workflow item with the subject of “Error when generating IDoc from MC document” is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
    It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

    Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
    Please check this link for
    http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
    <b>Reward points if useful and close thread if resolved</b>

  • Error when generating IDoc from MC document

    Hi,
    Our Workflow administrator is getting the following error  in his inbox daily for a particular IDOC type.
    Error when generating IDoc from MC document
    Please let me know how to disable this message.
    Regards
    Elini.P

    Hi  experts,
                i got the error msg when generating idoc from mc document
    this error msg goes to all sap users inbox,how to resolve this problem
    pl give me solutions
    regards
    kumar

  • I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

    I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • To purchase lightroom 5 for student and teacher edition, upon check out "Error in Your Order. Account registered for a different country. Please help. Thanks.

    to purchase lightroom 5 for student and teacher edition, upon check out "Error in Your Order. Account registered for a different country." Please help, thanks.

    Hi boags2014,
    Please refer this link and know the work-arounds for the same:
    How do I complete a purchase when I get an incorrect "country" error?
    Regards,
    Anubha

  • Invoice Posting with two accounting documents for Service PO

    Hi Gurus,
    We have created one service (GR based Invoice verification) PO for which we have assigned a costcenter which has been created for different company code(rather than what company code we have mentioned in PO).
    Now during Invoice creation out of 6 invoice entries only one Invoice has been created with two accounting documents for two different company codes, when we found this and canceled the same only basic entries has been reversed.
    I just wanted to know how this single invoice has been created with two different accounting documents for two different company codes.
    Please guide me in this regard.
    Thanks and Regards,
    Ravindra C.M

    Hi Aasif,
    Thanks for your reply, if that would have been case then each Invoice created for that PO should have two accounting documents but out of 6 invoice created only one invoice has been created with two accounting documents.
    I am completely agree with you that it has posted as inter-company transfer but why only one invoice has been created with two accounting documents.
    In addition to the above I just wanted to know if for GR-based invoice verified PO if we create a Invoice before creating service entry sheet whether two accounting documents will be created as we have mentioned different company code costcenter.
    Please guide me in this regard.
    Thanks and Regards,
    Ravindra C.M

Maybe you are looking for