Error when trying to remove logical systems using SALE
Hello,
We are trying to remove obsolete entries from the logical system name table using transaction SALE. When doing this, for some entries, I am getting a message:
The logical system GB1MATDEV is still used in distribution model SUBSYSTEMS (client 010).
Confirm that the logical system GB1MATDEV is really no longer used. Delete it first from distribution model SUBSYSTEMS (client 010), then delete it here.
So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected.
It seems that I am stuck. Any ideas on how to resolve this?
Regards,
Michael Dube
Dear Michael
"So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected."
You need to delete the lowest possible node first, if you select the top node you get this type of error.
You need to expand the node and then delete the smallest part of the node first and work your way up until you can delete the node itself.
<removed_by_moderator>
Kind regards
Tom
Similar Messages
-
Receiving an error when trying to remove P00 Security role from the user
Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
VineetHi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore -
Runtime error (syntax error) when defining a new logical system
Hi!
I get a short dump when trying to define a logical system, the field <b>clidep</b> does is not defined in function module <b>SCPR_BCSET_PROT_GET_TABKEYS</b>:
CALL FUNCTION 'SCPR_HI_DB_SCPRACTR_READ'
EXPORTING
TABLENAME = wa_tabnames-low
VIEWNAME = viewname
CLIDEP = clidep
IMPORTING
ACTKEYS = actkeys
EXCEPTIONS
NO_DATA_FOUND = 1
OTHERS = 2.
I have searched for notes, but I haven't fiund anything to correct the error. Does anyone one how to correct this?
- Mari VirikHi!
I get a short dump when trying to define a logical system, the field <b>clidep</b> does is not defined in function module <b>SCPR_BCSET_PROT_GET_TABKEYS</b>:
CALL FUNCTION 'SCPR_HI_DB_SCPRACTR_READ'
EXPORTING
TABLENAME = wa_tabnames-low
VIEWNAME = viewname
CLIDEP = clidep
IMPORTING
ACTKEYS = actkeys
EXCEPTIONS
NO_DATA_FOUND = 1
OTHERS = 2.
I have searched for notes, but I haven't fiund anything to correct the error. Does anyone one how to correct this?
- Mari Virik -
I'm having this error when I try to remove a blob that was used for a VM in the pass, the VM was already removed and there's nothing using that blob nor even the storage account wh ere the blob is stored.
There is currently a lease on the blob and no lease ID was specified in the request. RequestId:0a441667-0001-0044-7861-bc17ef000000 Time:2014-12-18T15:53:04.5315752Z
I'm trying to delete the blob from the current web interface, and I haven't found a way to specify a lease ID or check what lease could it has.
Thanks in advanceHi jruiz,
When you delete a Virtual Machine on the Management Portal, the "Disk" resource used to mount the Virtual Machines VHD is kept.The "Disk" resource is responsible for mounting the blob for the VHD file, so it can be attached to virtual
machines as an OS Disk or Data Disk. It will continue to hold a lease on the blob for as long as it exists.
So you need to delete the "Disk" resource to break the lease on the blob.
Please refer to the link about how to delete disk resource to break lease on the blob.
http://blogs.msdn.com/b/mast/archive/2013/02/05/iaas-unable-to-delete-vhd-there-is-currently-a-lease-on-the-blob.aspx
Best Regards,
Kevin Shen. -
Error when trying to generate a report using BEX Quesry in Crystal Reoprts
HI Experts,
As per the SAP NOTE we did FP 2.6 Unicode Transports and then SP3 transports. Transports are imported with min Errors.
Now *when am trying to generate a report using BEX Quesry in Crystal Reoprts* am getting error
"Database Connector Error: BAPI Error #:0
Error occurred when starting the parser: timeout during allocate /CPIC-CALL: 'ThSAPCMRCV' "
*When trying to Generate using OLAP CUBE Report Wizard. AM getting Error*
" READING OLAP META DATA FAILED."
Thanks,
BharathThis is not really the correct forum to be posting Reports issues. However, if I were to guess, your issue is likely related to the known issues related to installing FMw11R1 on machines which had IPv6 enabled. In most cases, disabling IPv6 would correct the problem, however some issues were not resolved even after disabling IPv6 post-install. I would recommend patching to WLS 10.3.6 and FMw 11.1.1.6 as these versions include fixes for all of those issues as far as I recall.
Consider referring to this MyOracleSupport document if you have access:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1) -
Missing File error when trying to install HP 5610xi using Windows 7 64 bit download
I have tried several times to download and install the software and drivers for my old 5610xi on my new computer running Windows 7 Home Premium 64-bit OS. I keep getting a "missing file" message when trying to run the download, and it will not install. Can someone please help!?!?
Hi computeir, sorry to hear that you are having issues with getting your printer installed on to your computer. If you are connecting the printer to the computer with a usb cable, please remove it from the printer and the computer and set it aside. Please click the link I have provided for the HP Printer Install Wizard for Windows.
The installation will prompt you as to when to connect the usb cable. If you are still having issues, please feel free to write back.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Error when trying to login to InfoView using SAP credentials
I am working on connecting a Business Objects system with a SAP BW system. I have installed the "Integration Kit for SAP", but when I try to log into InfoView using Authentication = SAP and my SAP credentials, I get the following error:
Failed while trying to obtain the connection provider object for system AD4CLNT100. Unknown entitlement system: AD4CLNT100. Logon cannot proceed.
I tested with a dummy user/pw and I got the same error, which indicates that my SAP user is not recognized by BusinessObjects.
I checked the CMC, and correct the SAP users does not appear (I suppose this should be the case if the users was correctly syncronized?)
My question is, is my suspicion correct, is it the integration of users which has failed? If so, what can I do to fix it?
Thank you in advance.Hi Ingo,
I ollowed the section "Creating a user account for BusinessObjects Enterprise" when setting up the user and double checked the settings. If the settings are right is that what is required? Or do I need to aply other authorizations? (I am trying to narrow down the possible reasons for not getting more roles).
I have a huge number of roles in SAP which all have users assigned (not directly but nested via profiles etc. but I guess that is okay). None of these are shown in the list of groups.
I have copied the Profile of the user "crystal" which I created according to the Installation and Administrators Guide, it looks as follows:
Profile
+ T-A4340001 <PRO> Profile for role CRYSTAL_ENTITLEMENT
+ S_DATASET <OBJ> Authorization for file access
+ T-A434000100 <AUT> Authorization for file access
+ ACTVT <FLD> Activity
33
34
+ FILENAME <FLD> Physical file name
+ PROGRAM <FLD> Program Name with Search Help
+ S_RFC <OBJ> Authorization Check for RFC Access
+ T-A434000100 <AUT> Authorization Check for RFC Access
+ ACTVT <FLD> Activity
16
+ RFC_NAME <FLD> Name of RFC to be protected
/CRYSTAL/SECURITY
BDCH
PRGN_J2EE
STPA
SUNI
SUSO
SUUS
SU_USER
SYST
+ RFC_TYPE <FLD> Type of RFC object to be protected
FUGR
+ S_USER_GRP <OBJ> User Master Maintenance: User Groups
+ T-A434000100 <AUT> User Master Maintenance: User Groups
+ ACTVT <FLD> Activity
01
03
+ CLASS <FLD> User group in user master maintenance
Thank you in advance
Rasmus -
Error When Trying to Schedule Webi report using SAP authentication
Hii,
We are trying to Schedule Webi report in CMC for Group of Users using SAP authentication(SSO) ,While Trying this we are geting error Unable to Connect to SAP BW server Incomplete Logon Data ..(IES 10901) .
Authorization done at BI side and Its working properly.Users are able to login into BI Launchpad and View Report as per authorization
Some Webi reports are created using BICS connection and some are created using Universe Design Tool (.UNV) which are migrated from BO 3.1 to BO 4.0
Server Status:
BO server and Client Tools-:BO 4.0 SP6
BW System-7.01
Please refer attach Screen ShotHi Rupesh,
Please check the below note:
Seems issue with SNC/STS settings.
1798197 - Schedules fails with error "Database error: Unable to connect to SAP BW server Incomplete logon data.. (IES 10901)" in BI 4.0
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361… -
Keychain error when trying to open MobileMe system panel
I've had a lot of problems trying to get my iMac set up with MobileMe. My MacBook and iPod Touch are set up and working fine, but my iMac won't connect up (and never has). Following some advice on a forum here I did something in Keychain Assistant (can't remember what though!) and now I just get an error message when I try to open the system panel. -2147415734
I really don't want to have to do a clean install.
Any solutions?I just had the same error and found your posting with no reply, so I looked through the Apple Support pages and found the help I needed: http://support.apple.com/kb/HT1060. I worked my way down, with no luck, until the next to the last item, "Delete the MobileMe keychain entry." That worked for me, so I didn't need to completely reset my keychain.
Hope this helps -
We encountered an error when trying to create your account using worldship address
I am from saudi arabic I am trying to created account using addess of worldship but it's not working need you help to fix this issues
Hello majedmj,
Thank you for your message. I'm sorry to hear that you're still having difficulties in creating an account.
Creating an account on BestBuy.com requires only your first and last name, email address, zip code, and telephone number. Have you been able to successfully create an account by providing this information? If so, at what point are you receiving an error message? What specific error message(s) are you receiving? To my understanding, the address you provide must be a valid U.S. residential address. Does your address meet this requirement?
I look forward to hearing from you.
Sincerely, -
VMM error when trying to create logical unit (disk space) as part of the Fabric
This is the error message we get (underneath), has worked fine before, so not sure what has changed.
An internal error has occurred trying to contact the MBSSCVMM.MBS.local server: :a:DestinationUnreachable: :MI RESULT 6:The requested object could not be found..
WinRM: URL: [http://mbsscvmm.mbs.local:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/windows/storage/MSFT_StorageSubSystem?ObjectId={1}\\MBSSCVMM\root/Microsoft/Windows/Storage/Providers\EQL_StorageSubSystem.ObjectId="6090A0A8B05C103293E2A4"]
Check that WS-Management service is installed and running on server MBSSCVMM.MBS.local. For more information use the command "winrm helpmsg hresult". If MBSSCVMM.MBS.local is a host/library/update server or a PXE server role then ensure that VMM agent
is installed and running.
ID: 2912
Details: The handle is invalid (0x80070006)Can you verify that the storage provider is alive and healthy from VMM? A refresh should tell you the details.
Also, please tell a bit more about which storage provider you are using.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com ) -
Icotact gives me a memory error when trying to remove duplicates
Running the latest IOS. I launched icotact. then went in to Card menu, then look for duplicates. It took forever to find the duplicates and when it finally did I had about 8 duplicates. I then hit the merge duplicates button and the computer told me it has run out of system memory.
I have 8 gigs of ram in my system. I tried it a second time but on the second time i did a system restart same problem. Any thoughts?Oh, you mean Contacts? The contact management app?
I think that something is corrupted in the Contacts database which may be causing the problem you see.
Try deleting the index files which will rebuild the database.
Backup the Contacts by going to File menu and choosing Export to Contacts Archive
Close Contacts
Open Finder to this location
~/Library/Application Support/AddressBook
If you triple-click the above line, you can copy it and paste into Go To Folder (cmd-shift-g) in the Finder Go Menu.
You should see three files named with address book-v22.abcddb
AddressBook-v22.abcddb
AddressBook-v22.abcddb-shm
AddressBook-v22.abcddb-wal
Delete all three of them, then open Contacts.
It will take a moment to rebuild the index, but you should see all of you cards back.
Try merging the duplicates again.
If anything goes wrong, you can restore from the backup you made by double-clicking on it in the Finder. -
Problems error when trying to remove live
I couldnt start up any of the programs including audio HQ for my soundblaster li've 5.. I decided to try and reinstall but it kept giving me this error message halfway through the removal.
0x8004020 and then it shuts down.
Now i cant remove the soundblaster and therefor cant reinstall either. Ive tried all the manual remove stuff but that was no good either.
Hope you can help.
Thanksfrankh,
Check the steps in this Knowledgebase article SID682 and see if it helps you.
JasonMessage Edited by Jason-CL on 07-7-2006 05:46 PM -
Error when trying to compound source system
I am receiving the error message R7 405 "Inconsistent Compound with char x and Ref char x" when I try to compound 0SOURSYSTEM to some of my infoobjects.
Has anyone seen this issue and been able to resolve it?
A simple scenario would be to try to compound source system with 0Division. Division has a reference char of 0DIV_HEAD. Both are collected in RSD1 via the free selection of infoobjects. 0Division is changed and both objects are selected and activated. The resulting error R7 405 is then displayed by the system. We are receiving this for multiple objects. I was able to convert Material with all its dependencies.I get it.
This is what I did. I added source system as compounding IO to reference object, say ZDIVISION in IO editor. I saved it (it was giving me activation error). I then opened the referencing char, say ZDIV_HEAD in IO editor and added source system compounding. It was again giving me activation error, so I just saved it.
I went to RSD1, collected these two IOs and activated. I got an error because the reference IO was in a comm structure which had no source system. I deleted that infosource, and activated both the IOs again in RSD1. It activated just fine. Both IOs are active now.
By the way, the IO editor does allow you to add compounding for a referencing IO (it gives activation error though).
Not sure if this helps. -
RFC Error when trying to approve an system in that ransport domain
Hello gurus
We are running SAP on WIN2K3 ,MAxdb ERP6 and we are facing a prooblem when configuring that transport system
We are setting up a 2 tier system .We have created the domain controller VGB(devhost) but now the problem comes up when we try to approve BGH(prdhost) into the transport domain.It comes up with the following error in TMS alert viewer:
RFC communications error with system/destination
TMSADM at VGB.DOMAIN_VGB
File
devhost\sapmnt\trans\bin\TPPARAM could not be opened for reading (No such file or directory)-------i can connect from prdhost at os level to the shared directory in devhost can read and write to usr\sap\trans
TMS_CI_CHANGE_CONFIGURATION
TMS_PS_READ_PROFILE_FROM_DISK -
READ_PROFILE_FAILED
We have done the following as we need to have a single transport directory on VBH
1.shared usr/sap/tarns on VBH (
2.gave access BGH to VGB host read/write access to usr/sap/trans
3.created a profie dir_trans
devhost\usr\sap\trans on BGH(prdhost)
so is there some where am getting it wrong? Any ideas are welcomeon the prdhost the following errors came up:
Profile Cannot read tp profile
Version TMS profile management is not active
DB Connect Link to database failed
Offline Call error in transportprofil (param missin..
on devhost( domain controller) no errors
Maybe you are looking for
-
Crystal Report 10 to Xi 3.1 - Migration
Hi All, Is there any document or white paper available for Migration of CR 10 to Xi 3.1. I am looking for detail step by step document for the migration. Requesting to send the same . Thanks in advance. Regards, Sid
-
Display image in jsp by retrieving it from DB2
I insert image in to db2 table using the code given below PreparedStatement preparedStatement = connection.prepareStatement("INSERT INTO BOOKCOVERS VALUES(?,?)"); File imageFile = new File("c:\\redbookcover.jpg"); InputStream inputStream = new FileIn
-
I can't click on some items on the upper part of every page I go to.
I have been trying to click on some items on several pages and I realized that the upper part of the page is not even responding to my left and right click. I was lucky enough to be able interact on this part of the page. For example, I can't left cl
-
Concert Flex project from Mac to Windows?
What do I need to know to convert a Flex project that was developed on a Mac to a Windows machine?
-
Route-List not using 2nd Route-Group when PRI cable is removed from H323 gw
CCM 4.1.3sr3b Router - 2811 - 12.4.4T2 1 site with 2 gateways, gw1 and gw2 RL has both gateways as RG's. If gw1 has its PRI cable removed, CCM RL will not pass call into gw2 - Not working. If gw1 is turned of/Ethernet removed RL will wait the h323 ti