Error When Trying to select a value project partner ComboBox in Sale Order

Hello,
I'm using a project partner comboBox in Order system form and i need to select a particular value in ValidValues comming from OPRJ table to fill this comboBox , is it possible?
This is my c# code
Form form = B1Connections.theAppl.Forms.Item("139");
//Create Project object;
                oPRJ = (SAPbobsCOM.Project)projectService.GetDataInterface(ProjectsServiceDataInterfaces.psProject);
                //Set Down Project Values
                oPRJ.Code = Numero_Dossier;
                oPRJ.Name = nom_dossier;
                try
                    if (Numero_Dossier != string.Empty)
                        projectService.AddProject(oPRJ);
                catch { }
oItem = form.Items.Item("157");
                oCmb = (ComboBox)oItem.Specific;
oCmb.ValidValues.Add (Numero_Dossier, nom_dossier);
oCmb.Select(nom_dossier,BoSearchKey.psk_ByDescription);
I get this error when running
Item -Form Item is not editable

Dear TENE BERTRAND,
It can not work by my test.
You may select the BP project in B1 application but not via SDK UI.
Best Regards
Jane Jing
SAP Business One Forums team

Similar Messages

Error when trying to add users to project

I am receiving an error when I try to add users to my projects. I have given all the new users the rights to see the projects I need them to see and when I go to the project right click select Project Access and click add users to project in the pop up window the next window that opens says "error" and has a Close button on the bottom right hand of the screen.
This is an urgent matter to get fixed need to have figured out as soon as possible need to get users added to have server go live by noon central time.
Thank you.

I presume if it's that urgent you've also logged a service request with Oracle Primavera Support, right?
What error does the server.log show?
have you checked if the MYPV user exists in the ADMN table, in the Expadmin db?

Run Time Error when trying to select hierarchy node

Hy all,
the situation is the following:
i attempt to create a variable of type "hierarchy node" (for cost center cha) in my planning area, i used the replacement type "user defined value", check on "input allowed by user" and then i create the user entry, in selection condition i run match code and when i try to select a single cost center (not a hierarchy node) expanding the hierarchy tree the system goes dump with the following message:
Runtime Errors         MESSAGE_TYPE_X
Error analysis
Short text of error message:
Program is inconsistent -> see long text
Technical information about the message:
Diagnosis:
An inconsistent program status has occurred. The program cannot be continued.
System response:
The system crashes.
Procedure
         1. Look in OSS for a note under the error message UPC099.
         2. When you open a problem message, send the first pages of the
             system crash message including the section 'Source code excerpt
             ' with the message.
     Procedure for System Administration
    Message classe...... "UPC"
    Number.............. 099
Selecting a hierarchy node (not a single cost center but a text node grouping more cost conter) this problem does not occur.
I appreciate (and reward) any hints.
Thanks in advance
Fabio

Hi,
Go through the oss notes with error message UPC099
Dump during hierarchy selection:<b>536694</b>
Dump when reading a hierarchy with intervals :<b>423953</b>
Regards-
Siddhu
Message was edited by: sidhartha

Getting error when trying to deploy the SQL project after making some changes

I’m getting the below error message, when I’m trying to deploy the project by making some changes.
In detail, The project was deployed successfully at first time. Later I did some changes(Added 1 more table) and I tried to deploy, but it was not sucess. I'm getting the below error message
Error message:Cannot upgrade the DAC for database CTR_FIN_FINNOTE_DB because the compatibility level is 70 or lower. Alter the database to support a compatibility level of 80 or higher
I checked in SQL, the compatibility level is 110 which is higher than 70.
Can any one help me out to overcome with this.
Regards
Sk.

Try to uninstall you application and then deploy again with the new changes.
jdweng

CUITe Error: Playback errors when trying to select treeitems

When I try to execute a tree item defined in a class as:
Object library:
public CUITe_WinTreeItem tree { get { return Get<CUITe_WinTreeItem>("Name=Flow Correlations"); } }
Test method class:
public Common common = new Common();
common.tree.Click();
it fails most of the time. I added
Playback.PlaybackSettings.WaitForReadyLevel = WaitForReadyLevel.AllThreads;
to give it enough time to complete the process but it doesn't work. Any help to figure this out would be great. I have been struggling to resolve this for a while now.
Thanks
Kajal
Kajal

Hi Kajal,
To really analyze this issue, please collect the detailed error log message.
https://msdn.microsoft.com/en-us/library/jj159363.aspx?f=255&MSPPError=-2147217396
I suggest you could try to add the DrawHighlight method check whether the control is found correctly.
Please also make sure that it captured all parent controls before it recognizes this child control.
A blog shared us more steps to troubleshoot the Coded UI test issue:
http://blogs.msdn.com/b/tapas_sahoos_blog/archive/2011/11/07/troubleshooting-record-and-playback-issues-in-coded-ui-test.aspx
If possible, you could refer to it.
If you get any latest information, please feel free to let me know.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Captivate 6 has a "fatal error" when trying to open a blank project.

Mac 10.8 Tried uninstalling and fresh install.

Hi Vikram
Thanks for getting back to me.
I am using windows 7. The error happens whenever I record L I did have a very full hard disk when the issue started – but this has now been resolved and as I said I did reinstall Captivate.
I am not using a different user account.
Best wishes
Susan

I'm getting an Internal Muxer Error when trying to build a DVD project with still menu images

It originally happened with moving menu content and a help search said it was due to the loop point on a menu being after the end point of the asset but this was not the case.
I've now changed all the menu content to static images and the error is still occurring.

If you want a still image for your DVD menu, click on the Menu in the Outline, then look at the Inspector. Is the Duration set to 0? If not then change it to zero. Also look below that to "At End" and make sure that is set to Still.
Also make sure the image that you imported was a RGB image in either JPEG, TIFF, PNG, or PICT format (PNG would be your best choice), and that the image is SD resolution (i.e., 720x480 for NTSC).

Error Occur when trying to select Item List

Hi Experts,
Machine gets Hang when trying to select Item List in row level PO,SO ect as well as in item master Data when Pressing Star ( * ) .
and when trying to close this window then error occur as close the program and problem occur on server itself
Test Database is working fine.
worked around
1.Restarted the machine
2.Restarted services
using SBO 9.0 PL 7
OS-Window 7 Professional
Please Find the Two Error Attachments
Please help me
Thanks & Regards
Navnath

Hi
Check the below thread
SAPB1 Application Hang and Not responding when i serch item in any document
With Regards
Balaji Sampath

List of values failure error when trying to use dynamic data values

Hi there,
I have a user who is experiencing problems when trying to use dynamic values in a report. Whenever he tries to insert dynamic parameters he gets the following error message:
Prompting failed with the following message: 'List of Values failure: Failed to get values. [Cause of error: Access is denied.] Error Source: prompt.dll Error Code: 0x8004380D
He even opened the sample report - prompting.rpt - that is included with CR and gets the same error.
We are using Crystal Reports XI Release 2 ver. 11.5.11.1470.
Any help would be appreciated.

Please excuse my ignorance of the product. I've had this problem dropped in my lap and I know practically nothing about Crystal Reports. In doing some digging it appears to me as if the BusinessObjects Enterprise software may not be installed properly, if at all. In the programs menu under the BusinessObjects XI Release 2 folder I see a BusinessObjects Enterprise folder, but the only icon listed in that folder is Software Inventory Tool.
Is the BusinessObjects Enterprise software a separate install from Crystal Reports or is it bundled together? I talked with the tech that did the install and he said that all he had was the Crystal Reports install media.

When trying to export an iMovie project I get the following error message (-108).

When trying to export an iMovie project I get the following error message (-108)

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

Error when trying to migrate project from labwindows 2010 SP1 over to VS2008

I'm sure I've been successful back with this when running CVI 8.5 and VS2003 / 2005, but I keep gettin the following error when trying to do this with my current configuration. What am I missing?
See attached image
Regards
Gavin
Attachments:
CVI-VS error.JPG ‏29 KB

Not recently, but what I would say is that CVI 2010 SP1 was installed after my VS2008 installation, so it ought to be in the right order.... When I get a moment I'll reinstall the CVI runtime and see what happens. Its not critical that I get this fixed, as the project in question is so small, and as the important parts are almost competely ANSI C, it should be really easy to reconstruct in C# anyway. I'll let you know what happens anyway

Internal unkown error when trying to import a web service

Hi!!!
I need help to achive the possiblity to select methods from a web service, I get following errors:
NET Web Service Proxy Tool Report for Web Service:
Monday, May 14, 2007 10:53:44 AM
Web Service URL: http://10.110.30.228/automation/v1.wsdl
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Internal Unknown Error.
Please contact National Instruments for help.
C:\Program Files\National Instruments\LabVIEW 8.2\user.lib\WebService\chassie\.dll
In addition, when opning Labview software I get a message that I do not have permission to read dll file located in directory of webservice.
Hope for quick response.
Best regards A

Hi!!
I did make a try with http post (see attachment) with the aim to send a soap xml in the http post.
I do get an error when trying to parse the soap message (see message below).
Do you have suggestions for improvement of this VI???
All advice will be appresiated.
A
#####################################################################################################3
HTTP/1.0 200 OK
Date: Tue, 15 May 2007 13:24:20 GMT
Server: Boa/0.94.13
Connection: close
Content-type: text/xml
Cache-Control: no-store
Expires: -1
<?xml version="1.0"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Body>
    <env:Fault>
      <env:Code>
        <env:Value>envender</env:Value>
      </env:Code>
      <env:Reason>
        <env:Text xml:lang="en">Failed to parse SOAP message</env:Text>
      </env:Reason>
    </env:Fault>
</env:Body>
</env:Envelope>#########################################################################
Attachments:
Soap_post html.vi ‏31 KB

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error when trying to run Advisor

Hi!
I get the following error when trying to run the Advisor (Application Builder > Application xxx > Utilities > Advisor) over our application:
Unknown type! View: APEX_APPLICATION_PAGE_PROC Column: CONDITION_EXPRESSION1 Value: WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED
... this happens every time, even if I uncheck all boxes except one (e.g. "References with substitution syntax").
I'm wondering if there is something wrong with our Apex installation as I can't see any other references to this problem in the forum. We don't seem to be suffering any other problems so I expect it's something small...
Has anyone else ever encountered this and does anyone know of a solution? I would like to use the Advisor for some QA processes as it looks like a handy tool.
Many thanks in advance,
Alex.
Versions:
Apex 4.1.1.00.23
Oracle DB 10.2.0.2

Hi Alex,
very interesting. Looks like one of your processes uses the WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED condition which has been deprecated for a very long time.
If you execute the following query in your workspace schema, you should find those processes which do use the condition. You might want to check if the reported pages/processes are still used in your application.
select application_id,
       application_name,
       page_id,
       page_name,
       process_name
from APEX_APPLICATION_PAGE_PROC
where CONDITION_EXPRESSION1 = 'WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED';Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Conflict error when trying to upload to the cloud from my Note tablet

Three days ago I started getting an error when trying to sync new files to the cloud. They will try over and over until I turn sync access off, in fact. I also have Photoshop CC6 and was just added to the early access for the desktop access and that is when this problem started. I really need to be able to save my psdx files in some way and at the moment the cloud is the only way from the touch app. Any way to fix this? I am on a Samsung Galaxy Note 10.1 and Android Jellybean 4.1.2.

Make sure you're signed into Creative Cloud properly via the Settings icon in the upper right of the project selection workspace > My Account. (Looks like a cogwheel.) From some reason, that option goes kablooey from time to time.

Error When Trying to select a value project partner ComboBox in Sale Order

Similar Messages

Maybe you are looking for