Error when Update Oracle database statistics
HI All,
Just recent we have upgraded oracle 11 in SAP Landscape. while we are trying to update database statistics through this command
brconnect -c -u / -f stats -t all -f collect -p 4
It is throwing following message without completion
BR0280I BRCONNECT thread 2: time stamp: 2011-09-22 03.17.46
BR0881I Collecting statistics for table SAPSR3./BEV3/CHASTEU with method/sample
C ...
ORA-24550: signal received: Unhandled exception: Code=ebf00baa Flags=0
Can anyone guide us.
Thanks.
PrinceJ
Have you applied patches to your 11g database?... Theres some info online about ORA-24550 been a know issue and a patch has been released for that...
Regards
Juan
Similar Messages
-
Avoiding concurrency errors when updating a database through AJAX
What are some strategies for avoiding concurrency errors when updating a database through AJAX. That is, in cases where a given user could attempt to modify the same row in the database with simultaneous requests (say, that he updates one column with information with an AJAX call, then immediately submits a form that updates the same row), what are some good ways yo prevent the two updates from colliding? On the JavaScript side one might make the AJAX call synchronous, but I question whether that is the best way to do it. Has anyone else confronted this?
Well, since no one seems to have any ideas so far, I'll throw in my two cents worth.
I'm not too familiar with AJAX so my advice may be limited.
I suggest you do a google search on Optimistic concurrency database to get some ideas on how to handle it.
If your update/insert/delete query is thread safe, then even if the same user double clicks the button fast enough to immediately have another update to the same record, then the first update will complete before the second one is carried out. Therefore no harm is done since he is just updating the same record. Since a typical update/insert/delete takes only a few milliseconds (querying may take a lot more time), its not likely he can click the button that fast. (I assume your using connection pooling for speed).
The trouble comes up when two people call up data from the same record in different browsers. The first one updates/inserts/deletes the record. Now the other user is looking at old data. When he updates/inserts/deletes, there is a problem. One way to handle this is to keep a copy of all the fields from that record in each user's session scope when they first fetch it from the database (example: oldName). Then when you go to update some time later, to this:
sql= update person set name=newValue where personID=3344 and name=oldName
Note oldName is from session scope.
If name in the database has changed, the update will not occur and will return 0 records updated. If it didn't change, it will update.
Note your update function should not throw an exception if it cant update, it should return false. Return true if it worked.
Example: public boolean updateName(String name)
Similiarly, your insert should not throw an exception if the record already exists, it should return false meaning it cant insert.
Exaple: public bolean insertName(String name). Same thing with delete function.
If a record cant be updated due to someone else updating the record while the user was looking at data, return a message that it wasn't updated due to that problem. Then show the user the new value in the database ask him if he wants to overwrite the new change.
Note even if you show 100 records on the JSP, only update the ones that have changed and not all 100. This way, its not likely he has updated the same records someone else has altered. Less likely a colision compared to updating all 100.
If your updating/inserting/deleting more than 1 record (say, 3), then you should look into setting up a transaction in addition to all the above and rolling back all of them if one fails.
Reading the section on databases from http://www.javapractices.com/home/HomeAction.do may also help. -
I've been trying to figure out this error I get sometimes when I update my oracle database. I haven't been able to track down exact steps to make it happen but when it does happen, it seems to break any query call to the database that looks at the record I was attempting to update (at least that's what I'm thinking). The message I get is below. Has anyone else experienced this?
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver]Network problem, session aborted due to internal error in remote procedure call, connection closed.
Thanks!Hello,
I'm trying to connect to an oracle DB and i'm getting exactly the same error.
i use System.Data.OracleClient and OracleConnection to connect.
The code throughs the exception at "connection.Open()".
This is not an asp.net application.
Any help will be higly appreciated.
Thanks
/Kadji -
OCI-21500 error when upgrading Oracle database from 10.2 to 11.2
We have been running some test upgrades from 10.2 to 11.2 before running it on our production server. During one of these tests, the post-upgrade script utlu112s.sql generated the following output:
Oracle Database 11.2 Post-Upgrade Status Tool 12-12-2011 21:12:54
Component Status Version HH:MM:SS
Oracle Server
. VALID 11.2.0.2.0 00:53:59
JServer JAVA Virtual Machine
. VALID 11.2.0.2.0 00:31:25
Oracle Real Application Clusters
. INVALID 11.2.0.2.0 00:00:03
Oracle Enterprise Manager
. VALID 11.2.0.2.0 00:33:44
Oracle XDK
. VALID 11.2.0.2.0 00:13:00
Oracle Text
. VALID 11.2.0.2.0 00:05:19
Oracle XML Database
. OCI-21500: internal error code, arguments:
[KODDBG_PUSH_80IMGPTR:dbgecPushPtr
. failed], [0], [0xFFFFFFFF7FFF55E8], [0xFFFFFFFF7F22E2B8], [1], [], [], []
. OCI-21500: internal error code, arguments:
[KODDBG_PUSH_80IMGPTR:dbgecPushPtr
. failed], [0], [0xFFFFFFFF7FFF55E8], [0xFFFFFFFF7F22E2B8], [1], [], [], []
. OCI-21500: internal error code, arguments:
[KODDBG_PUSH_80IMGPTR:dbgecPushPtr
. failed], [0], [0xFFFFFFFF7FFF55E8], [0xFFFFFFFF7F22E2B8], [1], [], [], []
. VALID 11.2.0.2.0 00:20:49
Oracle Database Java Packages
. VALID 11.2.0.2.0 00:00:53
Oracle Multimedia
. VALID 11.2.0.2.0 00:13:00
Spatial
. VALID 11.2.0.2.0 00:20:00
Gathering Statistics
. 00:24:39
Total Upgrade Time: 03:37:02
PL/SQL procedure successfully completed.
As far as we can tell, everything appears to be up and running, but the OCI-21500 internal errors are troubling. I have not been able to find anything on metalink regarding this error, and I am wondering if anyone else has come across it before. Thanks for your help!
SimeonThe OS is Solaris 10 (SunOS 5.10) and the source DB version was 10.2.0.4. We are running the upgrade manually (NOT with DBUA). The upgrade log does not have any ORA-xxxx errors, but it does show a few instances of the same error, such as this example:
SQL> desc XDB.XDB$RESOURCE_T;
ERROR: OCI-21500: internal error code, arguments: [KODDBG_PUSH_80IMGPTR:dbgecPushPtr failed], [0], [0xFFFFFFFF7FFF55E8], [0xFFFFFFFF7F22E2B8], [1], [], [], []
Regards,
Simeon -
Oracle Universal Installer Error when Installing Oracle database Software
Hi Guru's
we are installing SAP ECC 6.0 on Linux:Oracle, we start the installation fine until we reach the oracle software installation step. we login as ora<sid> then set the DISPLAY variable setenv DISPLAY 192.168.1.155:0.0
The csh shell is the one that is being used we find this after executing echo $SHELL, when we execute echo $DISPLAY it returns 192.168.1.155:0.0.
When we run ./RUNINSTALLER it then returns Failed the DISPLAY variable is not set correctly, to check if it working execute xclock, we run that and it displays the clock.
what could be the problem with this installation.I am trying to install Oracle 10g on Suse Linux and I am getting the
following error...
Checking monitor: must be configured to display atleast 256
colors Failed <<<< >>>> could not execute auto check for display colors
using command /usr/X11R6/bin/xdpyinfo check if DISPLAY variable is set.
I checked the DISPLAY variable and it is set right. -
Error when update "locate" database
I'm running a Lion system (10.7.3) that was upgraded from Snow Leopard. I want to update the "locate" database. I tried what is prescribed everywehre I've searched on line:
sudo /usr/libexec/locate.updatedb
That gives errors:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
find: .: Permission denied
What's wrong and how does one fix this?
Note that now, whenever I try to use locate, I get no output; before I ran the locate.updatedb command, locate had been working as expected.What was suggested above didn't work for me.. typing "sudo" just gives me the help content, while "su" tells me "su: Sorry". Conversely "su -MYUSER" worked.
However, this single command DID work for me (clearly, I am an admin user):
sudo -u MYUSER /usr/libexec/locate.updatedb
OSX: 10.8.3, Build 12D78 (semi-fresh OSX install) -
Preventing concurrency errors when updating a database with AJAX
Here is a question that has arisen on my current project. What are some strategies for avoiding concurrency errors in cases where a given user could attempt to modify the same row in the database with simultaneous requests (say, that he updates one column with information with an AJAX call, then immediately submits a form that updates the same row)? In which layer(s) would this best be handled? Is the best alternative to make the AJAX updates synchronous, rather than asynchronous?
pford68 wrote:
Here is a question that has arisen on my current project. What are some strategies for avoiding concurrency errors in cases where a given user could attempt to modify the same row in the database with simultaneous requests (say, that he updates one column with information with an AJAX call, then immediately submits a form that updates the same row)? In which layer(s) would this best be handled? Is the best alternative to make the AJAX updates synchronous, rather than asynchronous?The database and database driver should handle that situation. -
I get the following errors when login Oracle database.
ERROR:
ORA-09925: Unable to create audit trail file
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 9925
ORA-09925: Unable to create audit trail file
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 9925
What went wrong?
Amycheck the Location of the parameter audit_file_dest from pfile and check whether you can create any files on the file system. Generally, the audit_file_dest shoule be $ORACLE_BASE/admin/$ORACLE_SID/adump or $ORACLE_HOME/rdbms/audit.
If you're not able to create any files, change the permission of audit directory to 751 using chmod 751.
HTH
Anantha. -
ORA-00054 error when loading Oracle table using Data Services
Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Mariethe ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright. -
I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.
-
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
Oradim error while initializing oracle database instance
I am trying to install the Oracle 91 personal edition for windows 98 on a windows Me PC. After all the files for the database are copied, I get an error for the file "Oradim" and then a prompt to close all programs and restart my PC. Restarting the PC does not help me either.
Thanks in advance for any help.
regards
Parthauser8484066 wrote:
when installing oracle database 11gR2 on windows 7 64-bit following error is occuring.
G:\app\DELL\product\11.2.0\dbhome_3\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
Error? What error? I don't see an error. I just see the name of a file.
Fortunately we've all seen that file name enough to know what your error is anyway
I have downloaded this file from
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Can anyone help me in this.You failed to follow the download/install instructions at two different points.
The first was on the very page you cited as the source of your download, where it says
*"- Make sure to download and unzip both files to the same directory. "*
I'm willing to bet you a cold one that you either downloaded only one file, or you downloaded both files but unzipped them into separate directories.
The second point you missed was in the Installation Guide where it lists the acceptable Operating Systems under "Database Software Requirements". It lists all the various versions of Windows, including this line:
Windows 7 - Professional, Enterprise, and Ultimate editions
Notice the absence of any "home" editions . . . -
While processing ALEAUD - "Error when locking the audit statistics"
Hello,
I am sending out IDOC for HR data and then prcessing ALEAUD inbound idoc immediatley (setting is done in WE21 partner profiles).
While processing these incomming idocs, I am getting this error "Error when locking the audit statistics for P01LOGSYS1 IMTIMEDEP HRMD_A" for few idocs. e.g. out of 1000 for 100 idocs this error will happen and IDOC goes to status 51.
If I try to process thes idocs ALEAUD using background processing and if I schedule 2 jobs at a time then I will get same error and IDOC goes to status 51.
Can someone help me out?Hi
I tried processing the idocs in background processing as you have suggested using program RBDAPP01 (inbound).
There are 2 options in this program serial processing and parallel processing. When I select serial processing everyhting goes smooth but it takes long time. But when I select parallel processing I get same locking error mentioned above and only few idocs will get processed successfully with status 53 and all other will error out with status 51.
If I schedule 2 different jobs in background program RBDAPP01 (inbound) using serial processing then same thing will happen. only few idocs will get processed successfully with status 53 and all other will error out with status 51.
And I will get locking error ....
Note 1333417 says, " these IDocs will be processed via background runs of report RBDAPP01 \ RSEOUT00 (using background work processes) in batch mode leaving dialog work processes free for users and mission-critical processes. Hence you will not encounter the resources problems you are currently experiencing. The only other option would be to try increasing the number of available dialog work processes. The number of dialog processes must be greater than or equal to the total of the number of update and background processes per application server and must be configured across all operation mode
switches (see SAP note 74141). *However when there are a large number of IDocs being processed this is not a practical solution."*
Does that mean there is no possoble solution for this issue. If I increase dialog work processes will it be helpfull ? -
RPLDAP_EXTRACT - Error when updating the LDAP directory
I am connecting SAP IdM 7.0 to SAP HCM via VDS.
So far:
The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
I didn't see anything that makes sense in tables mentioned in the error message above.
I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
Any pointers in going forward?
Edited by: pasikuikka on Oct 20, 2009 11:01 AMHi Pasikuikka,
just a few questions:
Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
Hope this puts you on the right track.
Kind regards,
Achim Heinekamp -
Error when making a database call froman ejb
Hello,
I am getting the following error when accessing the database from an ejb -
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.mapSystemException(ShutdownUtilDelegate.java:68)
at javax.rmi.CORBA.Util.mapSystemException(Util.java:65)
at com.ejb._EULookupRemoteIF_Stub.fetchAllLookups(Unknown Source)
at com.ejb._EULookupRemoteIF_Stub.fetchAllLookups(Unknown Source)
at com.servlets.login.EUClsLoginServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)
Caused by: java.rmi.RemoteException
at com.sun.enterprise.iiop.POAProtocolMgr.mapException(POAProtocolMgr.java:451)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:545)
at com.ejb.EUClsLookupBean_EJBObjectImpl.fetchAllLookups(EUClsLookupBean_EJBObjectImpl.java:101)
at com.ejb._EUClsLookupBean_EJBObjectImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(GenericPOAServerSC.java:569)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(GenericPOAServerSC.java:211)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(GenericPOAServerSC.java:113)
at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:275)
at com.sun.corba.ee.internal.iiop.LocalClientRequestImpl.invoke(LocalClientRequestImpl.java:96)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(ClientDelegate.java:237)
at com.sun.corba.ee.internal.POA.GenericPOAClientSC.invoke(GenericPOAClientSC.java:97)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
at com.ejb._EULookupRemoteIF_Stub.fetchAllLookups(Unknown Source)
... 16 more
Any help?Please look in those 16 other stack traces for more details, there should be an actual SQLException if
it's a database problem, and/or the actual bean method that caused the problem.
Regards,
Marina
Maybe you are looking for
-
I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID and accound now my husband can see all the text I send and I get everything he gets how could I get his phone out of my accound
-
PLDA Belgium Field 44 in AE (Export declaration)
We get always an error message from belgium customs that they miss the following in Field 44: Algen 06 <Vat.-no.> Has anyone of you expierence with the belgium PLDA-System and give me an idea where we have to setup this information in GTS? We created
-
CAN MAKE IMAGE FROM ITS PART IN A LIBRARY
AS PART OF MY PROJECT I WANT TO MAKE A IMAGE FROM SMALL PARTS BY PARTS OF IMAGE. I HAVE ATTACHED LIBRARY FILE WITH SMALL PARTS OF IMAGE AND FULL IMAGE WHICH WANT TO MAKE FROM ABOVE PARTS OF IMAGAES. IFA NY ONE CAN HELP ME ITS REALLY HELPFUL... AN ADV
-
Editing HTML to create image rollovers
Greetings, I think I've read everything in the forum archives about this, and have received helpful fragments of responses, but am still not able to get image rollovers to work in iWeb. 1) I've created the actual rollovers in ImageReady, which genera
-
Street and house number not showing for few customers in search xd03
Hi All, While trying to search for a customer number in XD03 using "Address Attributes", i get the list of customers which is fine. However for few of those customers, system does not show the street name or the house number in the initial search res