Error when uploading my App

I'm trying to get an app uploaded into the App Store, but the error I'm getting is different than others I've seen here the forum. I'm trying to figure out what I'm doing wrong.
I'm getting the following message when I upload the app:
"The binary you uploadad was invalid. The bundle identifier contains disallowed characters. (See the Uniform Type Identifiers Overview documentation on the ADC web site.)"
My bundle identifier is a "*" like its supposed to be when you are going to upload more than one app.
I've also noticed that when I'm debugging I can load the application cleanly on the iPhone, when I set it into Distribution mode, however, it has a problem connecting to the device, but the Application still appears to build correctly.
Any ideas?

Your Bundle Identifier should NOT have a * in it. It needs to be unique such as com.yourcompany.yourapp
The wildcard is only used in the portal to help generate your provision.
Distribution versions will NOT load onto the device and are not meant to.

Similar Messages

  • AIR for iOS getting error while uploading the app, ITMS-9000 "Missing Provisioning Profile"

    hi!
    I get this error, when uploading the binary to Itunes. Any help, on how to solve out this problem ? And what does it mean ?

    for install on devices, you need to use a distribution cert. and a distribution provisioning profile for adhoc. When ready for AppStore you can use same distribution cert. but distribution provision profile for appstore. i completely use Windows PC for my entire process and use testflight to distribute to my testers. I'm not sure how the process is for simulator on the Mac is.  I just the use mac to create my certs and profiles and then application loader.
    When you tried upload to testflight did u use a distribution cert (p12) and an adhoc distibution provisioning profile. Also are the devices you are sending to are also registered to that profile.
    Also ive been doing this for 3 years now but consider myself a newbie still cuz I'm self taught and still learning and my ways of doing things in an unorthodox way but on average I have about 10 uploads of updates or new apps to the AppStore a year and haven't had an app rejected. These forms will be your best resource of info with users like @colin.

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • No suitable driver error when upload a pdf

    We are going to develop our own packaging tool which can provide convenient service for   Adobe Content Server.
    Before we begin on this project, we use the java sample console program which is called UploadTest to find out
    how to interact with Adobe Content Server.
    However, when we use the  UploadTest jar tool to package a PDF to Adobe Content Server and send our request
    successfully, the server always response a error as below with “httpStatus:200 " and “contentType:application/vnd.adobe.adept+xml”:
    <error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://192.168.34.56:8080/packaging/Package
    No%20suitable%20driver"/>
    Other details:
    (1)I am in Guangzhou China now ,but the server is  in the charge of our USA Team in American.
    (2)The commandline we use:
    java -Xmx1024M -jar UploadTest-1_2.jar http://our website/packaging/Package PdfFilePath -pass password.
    Who can help me?Why do the error arise? Do I need some other steps to make? Waiting for help online .Thank you very much!

    Thank you for helping us to catch the error.
    2012/12/13 Jim_Lester <[email protected]>
       Re: no suitable driver error when upload a pdf  created by Jim_Lester<http://forums.adobe.com/people/Jim_Lester>in
    Adobe Content Server - View the full discussion<http://forums.adobe.com/message/4918463#4918463

  • Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.

    Hi everyone,
    I `m getting error message like this  "Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.". when i try to debug the application with "Start Action"="Internet Explorer".This
    application  is  an apps for office application with Oauth with Office 365
    Any help in this regard is greatly appreciated 
    Thanks!!
    Santosh Sutar

    Thanks Fei for your time.
    >>>I would suggest that you create a new project and set it start action with 'Internet Explorer'
    to see whether this issue could be reproduced.  If no, we can compare the difference between the two menifest files.
    As per your suggestion above ,With new project,I can debug with with start action "Internet Explorer" and I
    could not see much difference between the manifest files.
    Please find below my manifest file for the reference .
    <?xml version="1.0" encoding="UTF-8"?>
    <!--Created:cb85b80c-f585-40ff-8bfc-12ff4d0e34a9-->
    <OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="TaskPaneApp">
      <Id>084cd6cd-2908-44d1-a5cf-4fa029aec211</Id>
      <Version>1.0.0.0</Version>
      <ProviderName>[Provider name]</ProviderName>
      <DefaultLocale>en-US</DefaultLocale>
      <DisplayName DefaultValue="Office 365 MVC" />
      <Description DefaultValue="Office 365 MVC"/>
      <AppDomains>
        <AppDomain>https://login.microsoftonline.com</AppDomain>
      </AppDomains>
      <Hosts>
        <Host Name="Document" />
        <Host Name="Workbook" />
      </Hosts>
      <DefaultSettings>
        <SourceLocation DefaultValue="~remoteAppUrl/Home/Index/" />
      </DefaultSettings>
      <Permissions>ReadWriteDocument</Permissions>
    </OfficeApp>
    Please suggest on this.
    Thanks !!
    Santosh Sutar

  • 'Install App for SharePoint' There were errors when validating the App Package

    Hello,
    When testing with an app, I tried to add an
    app event receiver before learning that remote event receiver are not allowed with
    Sharepoint-hosted app. So I reseted the Handle app installed and
    Web Project properties of my project and tried to redeploy and this error occurred :
    'Install App for SharePoint' There were errors when validating the App Package
    Something other than the project's properties have been modified but I don't know what.

    I think the best way to figure real reason out is to look at ULS logs.
    This is example, what I had:
    Unexpected        App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
    exception:  The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

  • Experiencing "timed out" error when uploading podcast

    I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...

    - You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
    - You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
    - You should set the planning horizon and use NETPL (net change in planning horizon) in daily run.  So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
    - You should discuss with your BASIS team about the list of background job in the batch windows.  Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
    - You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
    Rgrds,

  • Can anyone list problems/errors when uploading data using BDC's and BAPI's?

    Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

    Hi,
    If you are actually creating a BDC to load data pls be more specific.
    Data format incorrect. Tab delimited/ etc
    Dates in wrong formats
    Currency incorrect formats
    Missing screens
    Wrong transaction code
    File not found,
    Missing Mandatory fields,
    Screen resoultion.
    You should always use refresh for your Bdcdata table.
    Loop at internal table.
    refresh Bdcdata.
    regards,
    sowjanya.

  • Error when uploading file : Return code = 6 in LSMW

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    did you define the file in step 7 without any error and allocate in step 8 without any error before? 
    I mean in the same system where you execute the read step.
    Make sure you have the file not open when you execute the read step.

  • I keep getting an error when uploading documents

    I keep getting an error when uploading pages, keynote, or word documents into icloud.com. It won't tell me what type or error and it acts like it loads and gets all the way to the end of the bar and then says "error please try again." Please help!

    Have you tried a different web browser when submitting your proof of eligibility?

  • TS1702 unknown error when using the app store

    unknown error when using the app store

    Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps  etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611.  I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

  • Error when uploading master data

    Hello everybody...
                                  I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
    Error 8 when compiling the upload program: row
    227, message: The data type
    /BIC/CCABZRAK_COUN_ATTR was modified
    plz suggest me.....
    Thanks & Regards
    Rakesh Jangir

    Hi,
    There might be two reasons..
    1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
    2. Close the flat file while loading data...
    Regards,
    viren..

  • Error when uploading file :( Return code = 6 )

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    Hi,
    If the Sy-Subrc is 0 then Success,
             Sy-SUBRC is 4 then failure,
             Sy-SUBRC = 6 then the user might be not access to read the file.
    This is due to authorization issue.

  • Error when uploading file

    Hi all,
    we just have upgraded our EREC system to Enhancement Package 4, and we have now lot's of issues when the candidates try to upload documents in their cockpit. Even if the type of document is ok or the file size is fine also, there is the following error message : Error when uploading; the file name is invalid, or the file is too big
    We have this error with lot's of web browser : IE6-IE7-IE8-Firefox 2.xx-Firefox 3.6-Safari 3 and 4-Chrome
    It is impossible to debug this error, there is no stop at the breakpoints.
    Did anyone have any suggestion ?
    Our system information :
      EREC 604 SP 5
      NW    701 SP 5
    Thanks in advance
    Dominique

    Hello Sai,
    we already put an external breakpoint on the first step of the method called by the button, but it does not stop on this breakpoint.
    It looks like the error message is generated by javascript or is in the cache, but it is not possible to find where.
    WD component : HRRCF_C_ATTACHMENTS_UI
    View : VW_ATTACHMENT_DETAIL
    Method : ONACTIONAPPLY
    Thanks for your help
    Dominique

  • Error when uploading a tif file

    Hi All,
    I want to upload a file in tif format.i am having the file with tiff format.
    when i upload through se78 /import and given the file name as c:\CCNA- Puerto Rico Region Logo.
    But it is showing the following error.
    Uploading TIFF Files to SAPscript Texts                                        1
    Load File
    c:\CCNA- Puerto Rico Region Logo
    The file contains  8,678,690  bytes
    This is a TIFF file with INTEL byte order
    First IFD offset:                                8,672,788
    Reading IFD from offset  8,672,788  Number of Tags         22
    ImageWidth:                                          2,226
    ImageLength:                                           910
    Error: BitsPerSample tag has length <> 1 or 3
    Compression:                                             1
    Photometric Interpretation:                              5
    Number of StripOffsets:                                  1
    SamplesPerPixel:                                         4
    RowsPerStrip:                                          910
    Number of StripByteCounts:                               1
    XResolution:                                     5,000,000  /     10,000
    YResolution:                                     5,000,000  /     10,000
    ResolutionUnit:                                          2
    TIFF format error: No baseline TIFF 6.0 file
    Appreciated ur valuable suggestions.
    Thanks,
    Aravinda

    Hi,
    Up loading tiff fife first activate rstxldmc program .
    excute the program give ur logo name.
    In se71 u can include that object , id, macrc or something (these are comes after excute the program give ur logo name)

Maybe you are looking for