No suitable driver error when upload a pdf

We are going to develop our own packaging tool which can provide convenient service for Adobe Content Server.
Before we begin on this project, we use the java sample console program which is called UploadTest to find out
how to interact with Adobe Content Server.
However, when we use the UploadTest jar tool to package a PDF to Adobe Content Server and send our request
successfully, the server always response a error as below with “httpStatus:200 " and “contentType:application/vnd.adobe.adept+xml”:
<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://192.168.34.56:8080/packaging/Package
No%20suitable%20driver"/>
Other details:
(1)I am in Guangzhou China now ,but the server is in the charge of our USA Team in American.
(2)The commandline we use:
java -Xmx1024M -jar UploadTest-1_2.jar http://our website/packaging/Package PdfFilePath -pass password.
Who can help me?Why do the error arise? Do I need some other steps to make? Waiting for help online .Thank you very much!

Thank you for helping us to catch the error.
2012/12/13 Jim_Lester <[email protected]>
Re: no suitable driver error when upload a pdf created by Jim_Lester<http://forums.adobe.com/people/Jim_Lester>in
Adobe Content Server - View the full discussion<http://forums.adobe.com/message/4918463#4918463

Similar Messages

Urgent: Error while uploading into pdf file

Hi ,
I got a requirement that converting smartform into pdf file and sending into application server, And uploading the that pdf file into presentation server once a day am geting error when uploading into pdf format from application server .
Error : There was an error while tryinging to parse an image.
Please help me out its urgent.
Thanks in advance
Regards
krishna
Edited by: krishna rao on Feb 13, 2008 12:05 PM

U can use this code
Reward if useful
REPORT ZMN_PDF_UPLOAD.
data: begin of itab occurs 0,
field(256),
end of itab.
data: dsn(100) value '\usr\sap\DEV\DVEBMGS00\work\testpdf',
length like sy-tabix,
lengthn like sy-tabix.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\temp\test.pdf'
filetype = 'BIN'
importing
filelength = length
tables
data_tab = itab.
open dataset dsn for output in binary mode.
loop at itab.
transfer itab-field to dsn.
endloop.
close dataset dsn.
clear itab.
refresh itab.
*To crosscheck if it went well
open dataset dsn for input in binary mode.
do.
read dataset dsn into itab-field.
if sy-subrc = 0.
append itab.
else.
exit.
endif.
enddo.
call function 'GUI_DOWNLOAD'
exporting
filename = 'c:\temp\testn.pdf'
filetype = 'BIN'
bin_filesize = length
importing
filelength = lengthn
tables
data_tab = itab.
*Or
*Use the TCode
*CG3Z or CG3Y
*for downloading to Application Server.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Error when exporting a pdf in SAP

She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex image

See your other thread.

No Driver Error when including Traditional DAQ in CVI 9.0 Distribution Kit

I have some legacy code (CVI 6.0) that I wanted to upgrade recently. The biggest reason was the ability to add the device drivers to the distribution kit. When I installed the software on a new machine I got a No Driver Error when doing a CounterStart call . In the past that error meant that I had not included CVI support when I installed Traditional DAQ. Since it was installed as part of a distribution kit I can't see what elements were installed. I assume since it was included as part if a CVI distribution kit that CVI support is automatically. How can I get rid of the no driver error?
Thanks,
CP
Solved!
Go to Solution.

Hi, Clutch
try this, build->distribution->managing distribution -> build step. and in drivers&components Table, you can select the driver you want to include.
see graph below
hope this can help !
B.R
Gerry
Attachments:
kits.JPG ‏116 KB

Experiencing "timed out" error when uploading podcast

I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...

- You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
- You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
- You should set the planning horizon and use NETPL (net change in planning horizon) in daily run. So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
- You should discuss with your BASIS team about the list of background job in the batch windows. Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
- You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
Rgrds,

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Error when uploading file : Return code = 6 in LSMW

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

did you define the file in step 7 without any error and allocate in step 8 without any error before?
I mean in the same system where you execute the read step.
Make sure you have the file not open when you execute the read step.

I keep getting an error when uploading documents

I keep getting an error when uploading pages, keynote, or word documents into icloud.com. It won't tell me what type or error and it acts like it loads and gets all the way to the end of the bar and then says "error please try again." Please help!

Have you tried a different web browser when submitting your proof of eligibility?

Error when uploading master data

Hello everybody...
I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
Error 8 when compiling the upload program: row
227, message: The data type
/BIC/CCABZRAK_COUN_ATTR was modified
plz suggest me.....
Thanks & Regards
Rakesh Jangir

Hi,
There might be two reasons..
1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
2. Close the flat file while loading data...
Regards,
viren..

Error when uploading file :( Return code = 6 )

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

Hi,
If the Sy-Subrc is 0 then Success,
Sy-SUBRC is 4 then failure,
Sy-SUBRC = 6 then the user might be not access to read the file.
This is due to authorization issue.

Error when uploading file

Hi all,
we just have upgraded our EREC system to Enhancement Package 4, and we have now lot's of issues when the candidates try to upload documents in their cockpit. Even if the type of document is ok or the file size is fine also, there is the following error message : Error when uploading; the file name is invalid, or the file is too big
We have this error with lot's of web browser : IE6-IE7-IE8-Firefox 2.xx-Firefox 3.6-Safari 3 and 4-Chrome
It is impossible to debug this error, there is no stop at the breakpoints.
Did anyone have any suggestion ?
Our system information :
EREC 604 SP 5
NW 701 SP 5
Thanks in advance
Dominique

Hello Sai,
we already put an external breakpoint on the first step of the method called by the button, but it does not stop on this breakpoint.
It looks like the error message is generated by javascript or is in the cache, but it is not possible to find where.
WD component : HRRCF_C_ATTACHMENTS_UI
View : VW_ATTACHMENT_DETAIL
Method : ONACTIONAPPLY
Thanks for your help
Dominique

No suitable driver error

Hi when i compile the folowing piece of code i get and error say
"no suitable driver"
can anybody explain this for me
import java.sql.*;
public class JDBC {
public static void main(String args[]) {
String url = "jdbc:mySubprotocol:Grace.mdb";
Connection con;
String createString;
createString = "create table Student " +
"(Student VARCHAR(32), " +
"username INTEGER, " +
"password FLOAT)";
Statement stmt;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url, "", "");
stmt = con.createStatement();
stmt.executeUpdate(createString);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
}

If you are going to use the JDBC-ODBC bridge you will need to change your URL to be:
String url = "jdbc:odbc:Grace";where Grace is an ODBC data source name that points to your Access file Grace.mdb
Take a look here for more info
http://java.sun.com/docs/books/tutorial/jdbc/basics/connecting.html
Col

Error when uploading book to Blurb from LR 4.1 and after 4.3 update

I have been trying for over 24 hours to upload a 75 page book successfully from LR 4.1, and also after updating to LR 4.3! I was initially able to upload to pdf format in LR 4.1, then it stopped working. Book upload to Blurb took a very long time to upload the 75 pages plus cover and got stuck in the process of uploading pages, finally returning an error message: "There was an error in uploading your book, would you like to try again?"
After several attempts to upload the book, updating to LR 4.3., then the process stopped working in upload to pdf. I checked the box on background "Apply Background Globally" to get to the "Graphic" checkbox that was checked. I unchecked it and then removed the "Apply Background Globally" checkbox. After doing that, I was able to upload to pdf, but still received the error message when uploading to Blurb, even after several of retry attempts.
As a workaround, I was going to try to upload the pdf file directly to Blurb but received a statement saying the pdf was not the right size. Please help with this issue. I purchased LR4 to be able to use the book feature and I am very disappointed in both Adobe and Blurb for the lack of support found in all of the FAQ's, How To's, etc. I have seen so many posts similar to mine. Surely there should be some fix for these common issues by now.
I would appreciate any help you can provide.

Hello,
I had this problem as well - the upload to Blurb would not work. Creation of a PDF and export as JPEG in the book module worked.
For me, the solution was to turn off the Windows Firewall while uploading. Now it works!
Two-in-Love (Photographe de Mariage en Suisse Romande)
http://www.two-in-love.ch

Weblogic 6.1 sp2 "No suitable driver" error

We have weblogic6.1 sp2 installed on a Windows NT box .
The config.xml has the following entry :
<JDBCConnectionPool CapacityIncrement="1"
DriverName="weblogic.jdbc.oci.Driver" InitialCapacity="4"
MaxCapacity="8" Name="TrainingPool"
Password="XXXX"
Properties="user=XXXXX;server=yyyyy" Targets="myserver" URL="jdbc:weblogic:oracle:mons817"/>
When weblogic is started, the connection pool TrainingPool is created fine with initial
4 connections .
However, when we try to connect to the connection pool using this piece of code in
an entity bean :
DriverManager.getConnection("jdbc:weblogic:jts:TrainingPool")
we get this error : "No suitable Driver"
CLIENT DEBUG - Finder Error in CClassTracking javax.ejb.FinderException: java.sql.
SQLException: No suitable driver
Start server side stack trace:
javax.ejb.FinderException: java.sql.SQLException: No suitable driver
at teamscape.server.entities.EClassTrackingBean.EClassTrackingBean._select
Anyone has any ideas on what could be wrong ?
Thx,
~sanil

Sanil Pillai wrote:
We have weblogic6.1 sp2 installed on a Windows NT box .
The config.xml has the following entry :
<JDBCConnectionPool CapacityIncrement="1"
DriverName="weblogic.jdbc.oci.Driver" InitialCapacity="4"
MaxCapacity="8" Name="TrainingPool"
Password="XXXX"
Properties="user=XXXXX;server=yyyyy" Targets="myserver" URL="jdbc:weblogic:oracle:mons817"/>
When weblogic is started, the connection pool TrainingPool is created fine with initial
4 connections .
However, when we try to connect to the connection pool using this piece of code in
an entity bean :
DriverManager.getConnection("jdbc:weblogic:jts:TrainingPool")Hi. Don't use DriverManager. It isn't causing the problem, but it does cause other ones. Do this:
Driver d = (Driver)Class.forName("weblogic.jdbc.jts.Driver").newInstance();
conn = d.connect("jdbc:weblogic:jts:TrainingPool", null);
Joe
>
we get this error : "No suitable Driver"
CLIENT DEBUG - Finder Error in CClassTracking javax.ejb.FinderException: java.sql.
SQLException: No suitable driver
Start server side stack trace:
javax.ejb.FinderException: java.sql.SQLException: No suitable driver
at teamscape.server.entities.EClassTrackingBean.EClassTrackingBean._select
Anyone has any ideas on what could be wrong ?
Thx,
~sanil

No suitable driver error when upload a pdf

Similar Messages

Maybe you are looking for