Error While Automating Calculaion Script

Hi All,
I am trying to automate the calc script created in EAS, i have changed the calc script filetype to xml.
& calling it through maxl script and getting the following error in log file
" MAXL> execute calculation FDQM.plan1.opex.xml;
ERROR – 1242021 – (1) Syntax error near ['.']. ”
The script in maxl that is used to for execution is
“spool on to ‘D:\\BRTEST.log’;
LOGIN admin passwordXXX on 10.125.5.95;
execute calculation FDQM.plan1.test.xml;
spool off;
exit”
Can anybody guide me where i am wrong.??
Thanks in advance
Regards,

Dear John
Thank you, through your help i am able to automate the calc script.
I Can't see the execution of the calc script.
Is it recorded some where in logs or any thing?
Except (The log file which MAXL creates as mentioned in maxl script)

Similar Messages

Error while executing the script adgetlnxver.sh

Error while executing the script adgetlnxver.sh on apps&db tier during upgrade from 11.5.9 to 11.5.10.2
-bash: [: -lt: unary operator expected
[aptinst@dba5 TINST_dba5]$ sh adapcctl.sh restart
adapcctl.sh version 115.55
/u01/app/tinst/tinstappl/ad/11.5.0/bin/adgetlnxver.sh: line 123: [: -lt: unary operator expected
Apache Web Server Listener :httpd ( pid 8645 ) is running.
Restarting the Apache Web Server Dedicated HTTP Listener..
Apache Web Server Listener (PLSQL) :httpd ( pid 8673 ) is running.
Restarting the Apache Web Server Dedicated PLSQL Listener..
adapcctl.sh: exiting with status 0
In adgetlnxver.sh: line 123 says
if [ ${setflag}x = "x" -a $os = "RH" ]; then
redhatver=`grep -oP "Enterprise Linux [a-z A-Z 0-9]* release [0-9]+" /etc/redhat-release | sed 's/Enterprise Linux [a-z A-Z 0-9]* release //g'`
if [ $redhatver -lt 5 ]; then
LD_ASSUME_KERNEL="2.4.19"
export LD_ASSUME_KERNEL
fi
fi
Thanks,
Vamsi

Hi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim

Error while running OMBPlus Script

Hi,
I am getting below error while running OMBPlus script.
+../../../jdk/bin/java[87]: getconf: not found+
OMB*Plus: Release 9.2.0.4.0
Copyright (c) 2003 Oracle Corporation. All rights reserved.
Exception in thread "main"
I am not even able to run ./OMBPlus.sh.
Can anyone help me on this?
Thanks in advance,
Regards,
Sachin Bansal

Hi Nawneet,
Thanks for the reply..
I tried the same thing on our server. But there also I am getting the same error.
Am I missing anything?
What I am doing is:
1. Created one .tcl file (deploy_map.tcl).
2. Going to path where OMBPlus.sh resides i.e.$OWB_HOME/bin/unix
3.Then I called ./OMBPlus.sh and passed the path of deploy_map.tcl as an argument.
For e.g. if path of deploy_map.tcl is /abc/xyz/deploy_map.tcl
Then I would call OMBPlus like below:
./OMBPlus.sh /abc/xyz/deploy_map.tcl
Even if I would not pass any argument then still it should be connected to OMBPlus. But that's not happening.
Regards,
Sachin Bansal

"error while evaluating Java script for the package"

Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

Error while executing UNIX script from BODS - exit code 127

I am trying to execute a unix script by calling it in BODS job. It is giving an error saying Program terminated with exit code 127. The same script when i am executing in UNIX it is working fine. I am unable to trace the issue.

Hi Sabre,
As per the guidelines provided by the article, i had done below changes..
InputStream is = null;
InputStreamReader iStreamReader = null;
BufferedReader bReader = null;
String line = null;
try{
String fileName ="test.ksh";
String argValue ="satish"; // value passed to the script
String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
Process proc = Runtime.getRuntime().exec(exeParam);
is = proc.getErrorStream();
iStreamReader = new InputStreamReader(is);
bReader = new BufferedReader(iStreamReader);
System.out.println("<ERROR>");
while((line = bReader.readLine()) != null)
System.out.println("Error is : "+line);
System.out.println("</ERROR>");
int exitValue = proc.waitFor();
sop("Exit Value is : "+exitValue);
catch(Exception e)
e.printStackTrace();
Now , it's showing something like..
<ERROR>
</ERROR>

UCCX error while updating Cisco Script Application

Hi all,
I am using UCCX 9.0.2 in my lab.
I have a working Cisco Script Application mapped to a trigger.
I want to update to the script to a new script in this application.
When I click on the Update button I get this error: "Error while performing the operation. Please look into logs for more information. "
Please let me know what logs would be helpful to check further on this error. I could not see any logs matching the error in the default MIVR logs.
Thanks,
Dilip

Hi Dilip,
Can you check if the Cisco Unified CCX Database is IN SERVICE on both the nodes?
To verify the integrity can you run the following command on both the nodes (non-business impacting)
utils uccx database dbserver integrity
Check the update post that. If it still fails, look out for the Replication Servers under the Cisco Unified CCX Serviceability -- Tools -- Datastore Control Center -- Replication Servers.
Both nodes should show Connected and Active with the Reset replication button available.
then proceed to the Related Links for Datastores and check the Config Datastore. See if it shows both the nodes and if the status is RUNNING.
The Config Datastore works on the Informix 2 phase commit protocol which means that for a transaction to be commited into the DB, both the primary and target node (Informix terminology) needs to participate in the transactions.
This will fail if the one of the nodes is down, DB on one of the nodes is down. If the secondary node goes down, then to make a config update, the Disable CDS/HDS can be carried out which will remove this protocol and the config changes will be successful from the primary.
if the primary is down and the secondary is up and if you try to make a config change, it will fail always as the IDS need the primary to be up for the protocol and there is no workaround to this.
Hope this helps!
Regards,
Arundeep

Error while calling SAP script.

Hi all,
Has anyone faced this problem.
When I try to send an email from an activity in PB60 it does not work.
It pops up an error message - Error while calling SAPscript: <OPEN_FORM> <return code 1>.
Regards,
Bharat

Hi,
this means that some configuration info is missing! The driver program doesn't know which form to trigger in that case! You have to specify the SAPscript form to be trigerred for that case!
Regards,
Sooness

Error while running InstallOracleProfile script

good evening every one,
i have installed odac for VS 2010,while running the InstallOracleProfile script the following error occurs can any one help me in solving this problem.im using windows os. the error as follows
Connected.
------ Running 'C:\Users\johny.OOMSYSTECH.000\Desktop\prakash\odac_path\product\11.2.0\client_1\ASP.NET\SQL\InstallOracleProfile.sql' @PRAKASH.orcl ------
USER
PRAKASH
old 33: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProperties FOR &CurrentUser..ora_aspnet_Prof_GetProperties';
new 33: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProperties FOR PRAKASH.ora_aspnet_Prof_GetProperties';
old 34: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_SetProperties FOR &CurrentUser..ora_aspnet_Prof_SetProperties';
new 34: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_SetProperties FOR PRAKASH.ora_aspnet_Prof_SetProperties';
old 35: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetNOfInactPf FOR &CurrentUser..ora_aspnet_Prof_GetNOfInactPf';
new 35: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetNOfInactPf FOR PRAKASH.ora_aspnet_Prof_GetNOfInactPf';
old 36: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProfiles FOR &CurrentUser..ora_aspnet_Prof_GetProfiles';
new 36: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProfiles FOR PRAKASH.ora_aspnet_Prof_GetProfiles';
old 37: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteProfiles FOR &CurrentUser..ora_aspnet_Prof_DeleteProfiles';
new 37: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteProfiles FOR PRAKASH.ora_aspnet_Prof_DeleteProfiles';
old 38: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteInactPf FOR &CurrentUser..ora_aspnet_Prof_DeleteInactPf';
new 38: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteInactPf FOR PRAKASH.ora_aspnet_Prof_DeleteInactPf';
old 39: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_pkg FOR &CurrentUser..ora_aspnet_Prof_pkg';
new 39: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_pkg FOR PRAKASH.ora_aspnet_Prof_pkg';
PL/SQL procedure successfully completed.
Package created.
Package body created.
Function created.
Function created.
Function created.
Function created.
Function created.
Function created.
Grant succeeded.
Grant succeeded.
Grant succeeded.
GRANT ora_aspnet_Prof_BasicAccess TO ora_aspnet_Prof_FullAccess
ERROR at line 1:
ORA-01919: role 'ORA_ASPNET_PROF_BASICACCESS' does not exist
GRANT ora_aspnet_Prof_ReportAccess TO ora_aspnet_Prof_FullAccess
ERROR at line 1:
ORA-01919: role 'ORA_ASPNET_PROF_REPORTACCESS' does not exist
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
---------------------- Done ----------------------
thank you
prakash

Earlier in the script, the following CREATE statements were called:
-- Create roles. Create role privilege is required.
execute immediate 'CREATE ROLE ora_aspnet_Prof_BasicAccess';
execute immediate 'CREATE ROLE ora_aspnet_Prof_ReportAccess';
execute immediate 'CREATE ROLE ora_aspnet_Prof_FullAccess';
If they didn't succeed, that would explain the GRANT errors you see. If you didn't grant the CREATE ROLE privilege to the user, that would explain why CREATE ROLE calls failed.

Getting error while running shell scripts

Hi DBAS,
I Have one requirement,i want connect n database dynamically by using dynamic password and execute some oracle commands,i written some script ,but while running i am getting error,please any one correct my error ,i am not able to getting error
passwrd.pw like this
abc@abc
aaa@aaa
# vi healthcheck.ksh
#!/bin/ksh
export PW=`cat /applis/forum/pune/dbhealthchecks/.pw/passwrd.pw`
for (( i = 0 ; i < ${#PW[@]} ; i++ ))
do
sqlplus -s larry/$PW<<EOI
spool sysdate.dat
select sysdate from dual;
done
exit;
EOI
error :
line 2: syntax error at line 11: `for' unmatched
thanks!
larry
Edited by: tmadugula on Mar 18, 2011 6:26 AM

Could you explain the reason for the for loop and connection attempts while incrementing var $i?
It is also no a good idea to provide a password at the command line since it can be seen with 'ps' command.
Better:
sqlplus -s <<-EOI
connect larry/$PW
etc.

Attempted to divide by zero. Error while executing the script

Hi All,
I using a script I found long back and I'm trying to use to get disk space info from different servers with separate credentials.
I'm getting the below error and it has eaten my head but I'm not able to figure out where the problem lies in the code.
Attempted to divide by zero.
At D:\psscripts\ww.ps1:92 char:26
+ $freePercent = ($frspace/ <<<< $totSpace)*100
+ CategoryInfo : NotSpecified: (:) [], RuntimeException
+ FullyQualifiedErrorId : RuntimeException
I'm open to use any other way to find me Disk Space with different credentials..here security isn't a question.
This script uses computers.csv to reference the computer name and the referenced credentials in the script.
Thanks in advance
$freeSpaceFileName = "c:\script\FreeSpace.htm"
$warning = 50
$critical = 30
New-Item -ItemType file $freeSpaceFileName -Force
$ComputerList = Import-Csv -Path d:\Computers.csv;
$CredentialList = @{
Cred1 = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList 'laptop-pc\administrator', (ConvertTo-SecureString -String 'tamboli' -AsPlainText -Force);
Cred2 = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList 'contoso\administrator', (ConvertTo-SecureString -String 'Atlantic12' -AsPlainText -Force);
Function writeHtmlHeader
param($fileName)
$date = ( get-date ).ToString('dd/MM/yyyy HH:mm:ss')
Add-Content $fileName "<html>"
Add-Content $fileName "<head>"
Add-Content $fileName "<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'>"
Add-Content $fileName '<meta http-equiv="refresh" CONTENT="5">'
Add-Content $fileName '<title>All Servers DiskSpace Report©</title>'
add-content $fileName '<STYLE TYPE="text/css">'
add-content $fileName ""
add-content $fileName "</style>"
Add-Content $fileName "</head>"
Add-Content $fileName "<body>"
add-content $fileName "<br></br>"
add-content $fileName "<table width='100%' align=center>"
add-content $fileName "<tr bgcolor='#CCCCCC'>"
add-content $fileName "<td colspan='7' height='25' align='center'>"
add-content $fileName "<font face='tahoma' color='#003399' size='5'><strong>All Servers DiskSpace Report © - $date</strong></font>"
add-content $fileName "</td>"
add-content $fileName "</tr>"
add-content $fileName "</table>"
add-content $fileName "<br></br>"
# Function to write the HTML Header to the file
Function writeTableHeader
param($fileName)
Add-Content $fileName "<tr bgcolor=#CCCCCC>"
Add-Content $fileName "<td width='10%' align='center'>Drive</td>"
Add-Content $fileName "<td width='50%' align='center'>Drive Label</td>"
Add-Content $fileName "<td width='10%' align='center'>Total Capacity(GB)</td>"
Add-Content $fileName "<td width='10%' align='center'>Used Capacity(GB)</td>"
Add-Content $fileName "<td width='10%' align='center'>Free Space(GB)</td>"
Add-Content $fileName "<td width='10%' align='center'>Freespace %</td>"
Add-Content $fileName "</tr>"
Function writeHtmlFooter
param($fileName)
Add-Content $fileName "</body>"
Add-Content $fileName "</html>"
Function writeDiskInfo
param($fileName,$devId,$volName,$frSpace,$totSpace)
$totSpace=[math]::Round(($totSpace/1073741824),2)
$frSpace=[Math]::Round(($frSpace/1073741824),2)
$usedSpace = $totSpace - $frspace
$usedSpace=[Math]::Round($usedSpace,2)
$freePercent = ($frspace/$totSpace)*100
$freePercent = [Math]::Round($freePercent,0)
if ($freePercent -gt $warning)
Add-Content $fileName "<tr>"
Add-Content $fileName "<td>$devid</td>"
Add-Content $fileName "<td>$volName</td>"
Add-Content $fileName "<td>$totSpace</td>"
Add-Content $fileName "<td>$usedSpace</td>"
Add-Content $fileName "<td>$frSpace</td>"
Add-Content $fileName "<td>$freePercent</td>"
Add-Content $fileName "</tr>"
elseif ($freePercent -le $critical)
Add-Content $fileName "<tr>"
Add-Content $fileName "<td>$devid</td>"
Add-Content $fileName "<td>$volName</td>"
Add-Content $fileName "<td>$totSpace</td>"
Add-Content $fileName "<td>$usedSpace</td>"
Add-Content $fileName "<td>$frSpace</td>"
Add-Content $fileName "<td bgcolor='#FF0000' align=center>$freePercent</td>"
#<td bgcolor='#FF0000' align=center>
Add-Content $fileName "</tr>"
else
Add-Content $fileName "<tr>"
Add-Content $fileName "<td>$devid</td>"
Add-Content $fileName "<td>$volName</td>"
Add-Content $fileName "<td>$totSpace</td>"
Add-Content $fileName "<td>$usedSpace</td>"
Add-Content $fileName "<td>$frSpace</td>"
Add-Content $fileName "<td bgcolor='#FBB917' align=center>$freePercent</td>"
# #FBB917
Add-Content $fileName "</tr>"
foreach ($computer in $ComputerList)
Get-WmiObject -ComputerName $Computer.Name -Class Win32_LogicalDisk -Credential $CredentialList[$Computer.Credential] | Where-Object {$_.drivetype -eq 3}
Write-Host $item.DeviceID $item.VolumeName $item.FreeSpace $item.Size
writeDiskInfo $freeSpaceFileName $item.DeviceID $item.VolumeName $item.FreeSpace $item.Size
writeHtmlHeader $freeSpaceFileName
foreach($computer.Name in Get-Content Computers.csv)
Add-Content $freeSpaceFileName "<table width='100%'><tbody>"
Add-Content $freeSpaceFileName "<tr bgcolor='#CCCCCC'>"
Add-Content $freeSpaceFileName "<td width='100%' align='center' colSpan=6><font face='tahoma' color='#003399' size='2'><strong> $server</strong></font></td>"
Add-Content $freeSpaceFileName "</tr>"
Add-Content $freeSpaceFileName "<br>"
writeTableHeader $freeSpaceFileName
Thanks,

Hi Taher,
You got the error "Attempted to divide by zero.", because the input variable $totSpace is null, please note the variable $item when you invoked the function writeDiskInfo:
>>Get-WmiObject -ComputerName $Computer.Name -Class Win32_LogicalDisk -Credential $CredentialList[$Computer.Credential] | Where-Object {$_.drivetype -eq 3}
>>Write-Host $item.DeviceID $item.VolumeName $item.FreeSpace $item.Size
>>writeDiskInfo $freeSpaceFileName $item.DeviceID $item.VolumeName $item.FreeSpace $item.Size
And you haven't defined the variable $item before you used it, so please refer to the script below:
foreach ($computer in $ComputerList)
$items = Get-WmiObject -ComputerName $Computer.Name -Class Win32_LogicalDisk -Credential $CredentialList[$Computer.Credential] | Where-Object {$_.drivetype -eq 3}
foreach($item in $items){
Write-Host $item.DeviceID $item.VolumeName $item.FreeSpace $item.Size
writeDiskInfo $freeSpaceFileName $item.DeviceID $item.VolumeName $item.FreeSpace $item.Size}
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error while changing a script / UCCX 8.5

Hi,
While trying to change scripts last night I got the following error DBMgr:delete:failed: file name java.sql.SQL.Exception: Could not position within a table (informix.scriptsfiletbl)
I have never encounterd this error. This morning it seemed to have work fine. Anyone know what that error means?
Thanks,
AJ

Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
% truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

Data access error while running the script in fdm workbench script editor

Hello Experts,
I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                          -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
Thanks in advance...

Hi,
Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
Suggest your valuable suggestion's
Thanks in advance...
I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

Getting COM Component error while opening SSIS Script task.

Hi All,
While click on EDIT SCRIPT Button in script task it's not opening the script editing window.
Getting below error message:
"Error HRESULT E_FAIL has been returned from a call to a COM component. (EnvDTE)"
We have added ADODB reference in script task.
Thanks in advance, please give some suggestion.

I am using SSIS 2008 R2.
When I reload the package, script task visual studio opens first time, next time when I try to open script task visual studio from EDIT SCRIPT Button it gives below error:
"Error HRESULT E_FAIL has been returned from a call to a COM component. (EnvDTE)"

Error while saving logic script

Hello Everybody,
From this morning we are having this message:
Unhandled Error (HTTP Status:500): unmarshal.invalid.xml
While trying to saving logic scripts.
Anyone know the solution?
Have tried the sap notes in the other threads but they don't seem to work.
Got BPC 10 and installed recently the SP5
thanks for help

We have gone through the below SAP notes already but no luck!
http://service.sap.com/sap/support/notes/1693703
http://service.sap.com/sap/support/notes/1649819
-Srujana

EIS error while automating data loading

Hi,
We daily load ASO cube using EIS through planned jobs (.cbs).
This morning the load data process was still running after 3 hours... it last 20 mins normally. The only error I was having was the following, and nothing explicit in the olapisvr.log!
Error :
Environment variable ARBORPATH is not set.
Unable to open input file
Essbase Integration Services Shell - 11.1.1.3.0 (Build EIS111110B021)
Copyright(c) 1991, 2009, Oracle Corporation
All rights reserved
[LOCAL] ->
Script :
%EIS_BIN%\olapicmd.exe -f%EIS_BATCH%\dwh_cos.cbs

Hi,
While creating batch file did you set the ARBORPATH?
If not include SET ARBORPATH=Location of the essbase server in batch file and give a try.
Thanks,
Prathap

Error While Automating Calculaion Script

Similar Messages

Maybe you are looking for