Error while entering Landed Cost

Hi Experts,
We are using Landed Cost to add freight charges to item cost.
For one of my GRPO it gives me error as...
Invalid Account Code (173-9)
will you please suggest me any way out.
Thanks,
Suryakant

Hi Suryakant,
Have you checked these threads?
Invalid Account Code error when posting AP Credit Note
Invalid Account Code (Message 173-9)
Thanks,
Gordon

Similar Messages

  • Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Hi Rajesh
    Go to System Initilization =>  General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
    Relase the Block and add the Document it will add.
    With Regards
    Balaji

  • Error While entering data in VA01

    Hi,
    I get the following error while entering data for "Plant" in Sales order creation (VA01). Can anyone please tell me how to solve this problem.
    Runtime Errors SAPSQL_INVALID_TABLENAME
    Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
    Date and Time 27.04.2009 12:57:13
    Short dump has not been completely stored (too big)
    Short text
    A table name, specified in an SQL command, is unknown.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLV61Z" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
    not caught in
    procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An invalid table name "A996" was specified in an Open SQL command:
    Due to one of the following reasons, the error occurs only at runtime:
    - the table name was specified dynamically, or
    - the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
    ORDER-BY clause was specified dynamically.
    Missing RAISING Clause in Interface
    Program SAPLV61Z
    Include LV61ZU01
    Row 260
    Module type (FORM)
    Module Name SEL_KONDTAB
    Trigger Location of Exception
    Program SAPLV61Z
    Include LV61ZU01
    Row 724
    Module type (FORM)
    Module Name SEL_KONDTAB
    Source Code Extract
    Line SourceCde
    694 and kschl = se_kschl
    695 and datbi >= se_date
    696 and datab <= se_date
    697 and (coding_tab).
    698 endif.
    699 endif.
    700 else.
    701 if t681-ksdat is initial.
    702 if not <entrytab> is assigned.
    703 select * from (t681-kotab) appending table <cond_tab>
    704 where kappl = se_kappl
    705 and kschl = se_kschl
    706 and (coding_tab).
    707 else.
    708 select * from (t681-kotab) appending table <cond_tab>
    709 for all entries in <entrytab>
    710 where kappl = se_kappl
    711 and kschl = se_kschl
    712 and (coding_tab).
    713 endif.
    714 h_subrc = sy-subrc.
    715 if select_split ne 0.
    716 modify coding_tab from coding_alter index select_split.
    717 select * from (t681-kotab) appending table <cond_tab>
    718 where kappl = se_kappl
    719 and kschl = se_kschl
    720 and (coding_tab).
    721 endif.
    722 else.
    723 if not <entrytab> is assigned.
    >>>>> select * from (t681-kotab) appending table <cond_tab>
    725 where kappl = se_kappl
    726 and kschl = se_kschl
    727 and datbi >= se_date
    728 and datab <= se_date
    729 and (coding_tab).
    730 else.
    731 select * from (t681-kotab) appending table <cond_tab>
    732 for all entries in <entrytab>
    733 where kappl = se_kappl
    734 and kschl = se_kschl
    735 and datbi >= se_date
    736 and datab <= se_date
    737 and (coding_tab).
    738 endif.
    739 h_subrc = sy-subrc.
    740 if select_split ne 0.
    741 modify coding_tab from coding_alter index select_split.
    742 select * from (t681-kotab) appending table <cond_tab>
    743 where kappl = se_kappl
    Thank you in advance....
    Regards,
    Sriram.

    An invalid table name "A996" was specified
       in an Open SQL command
    Find out the transport request pertaining to Table A996 and ensure that both that request and the configuration request pertaining to that table are moved simultaneously.
    thanks
    G. Lakshmipathi

  • Error while creating Product Cost Collector

    Hi SAP Gurus,
    While creating Product Cost Collector I am getting the following Error:
    Enter a distribution rule for Order without a validity limit
    Message no. KD059
    Diagnosis
    The settlement profile used requires you to define a distribution rule for Order. For period 009 2008, however, you have not created a distribution rule for Order.
    Procedure
    Create a distribution rule for Order without a validity limit, because, if the distribution rule does have a validity limit, the system always issues this message in the period following the last valid period.
    You can also use a different settlement profile that does not require such a distribution rule, or change the settlement rule used.
    Can any one help where exactly i need to maintain this.
    The settlement profile settings are fine.
    I am getting this error only after i have changed the scenario to Reproting point back flushing

    Dear Suryanarayana
    Please check the corresponding settlement profile for product orders.
    In most of the cases message KD059 means that no distribution rule is assigned to your production order.
    This is not an error, but the system design. In order to avoid message KD059 you will either have to enter settlements parameters and a distribution, or change settlement profile for valid receivers in transaction OKO7 from 'settlement required' to 'Can be settled'.
    I hope this helps resolve the issue for you. I wish you the best in your endeavours.
    Kind Regards,
    Brendan

  • Recursive Loop Error while doing standard cost estimate

    SAP Gurus,
    We are trying to do standard cost estimate on a material and we are getting error because it is going in recursive loop even though we have used "recursive allowed" indicator for item components in the BOM. The error message numbers are CK 730 and CK 740. We are using 4.6c. I have tried the same scenario in ECC 6.0 and still I get the same problem.
    Below is my BOM structure:
    Material 10890345 (has low-level code 012)
            ---> 10867220 (has low-level code 013) and has recursive allowed indicator
    10867220
            ---> 10846733  (has low-level code 014) and has recursive allowed indicator
    10846733
            ---> 10890345 (has low-level code 012) and has recursive allowed indicator
    According to me, the BOM for material 10846733 is causing the problem.
    For some weird reason while doing the costing run for material 10890345, it s not stopping and going in a loop.10890345  and 10846733 should ideally have the same low-level code as they are recursive.
    Please help to provide some solutions at the earliest on how to avoid recursive loop during costing.
    Regards,
    Swapnil

    Dear,
    I have 2 things to shear with you.
    The method we followed to solve the iteration is as below
    1.Config change -
    Valuation variant in the costing variant, we changed the sequence as below
    material valuation
    4 planned price 1
    2 std price
    3 Mov ave price
    2. Material master change
    made all the semi finished goods and finished goods
    procurement type = E,
    costing with qty structure,
    Enter the planned price1
    By doing this what happens is
    when system first start the iteration, takes the planned price 1 and start iterating and next time in the second iteration it takes the calculated price from qty structure till it finds the difference between the value calculated is less than .001. Then it gives the result
    Why lot size is important is, in our case in some levels the usage is very less compared to the first material header qty and system used to stop in between  and not even reaching the last level as during the cycle it was reaching less .001 difference. may be in your case it may not be the case...just check
    Please come back after trying this. this was the only last option i had to solve the issue in my client.
    Another alternative is to have a different material for costing purpose to stop the iteration which i will not recommend as we need to do some calculation for each stage and input the cost of dummy material in each stage.
    My client is happy with the result as the difference between manual calculation and system calculation is less then .1%...this is because SAP will not consider the difference beyond .001, but in excel you get as many as decimals you want.

  • Run Time Error while Entering Quantity in Sales Order

    Dear All,
    Iam getting Run time Error while iam entering material quantity in sales order.Please  find the screenshot of the same.
    kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
    Rgds
    Thomson
    ST22 Screenshot

    Dear All
    Its Resolved Thanks For your Valuable time Support
    INCLUDE LV03VFB4 inside below code trigger error.
    PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                        WA_AVBBD-APOMOBILE
                                        DA_SUBRC
                                        DA_UPDKZ
                                        DA_VVBBD_TABIX
                                        0.
    This Was the Error some how 0 was there we are removed the 0 now it is working fine
    Rgds
    Thomson

  • Error while entering the time card

    Hi,
    while entering the time card,I am getting the error in APPS.PA_OTC_API api.
    oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20020: Pa_Otc_Api ::: ->Validate_Otc_Data->Validate_Process :: Check for quantity being negative. : ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    ORA-01403: no data found

    Hi
    Please clarify where are you entering the time card.
    Is it on a form of Preapproved expenditures? Are you using OTL, or any other time application?
    Are you are trying to load transactions thru the PA interface?
    Dina

  • Error while entering transaction for a new customer in release 12.1.1

    Hi,
    I created a new customer in receivables (am using the version 12.1.1)
    First i got an error while creating the customer saying, "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively"
    I corrected the profile class amounts and now am allowed to create the customer but now the error comes while entering a transaction for this new customer:
    "The system cannot determine geographical information for this location and cannot derive a tax jurisdiction. Please contact your system administrator"
    please suggest a solution.
    regards,
    Shilpa

    I faced the same problem, Doc ID 420194.1 solved the problem. Shilpa kindly post the solutions moving forward so the users can benefit from it. Thank you!
    Solution
    run Geography Reference Program with parameter "Country code" for all records.
    Navigate to Trading Community Manager ->
    Requests -> Run
    Select "Geography Name Referencing" program
    Processing for Table : HZ_LOCATIONS and Run Type : ALL
    Parameters: Country Code :US
    Usage Code :ALL
    From Location Id :NULL: To Location Id:NULL
    Start Date :NULL: End Date:NULL
    Number of workers:1
    Total number of Processed Locations:9
    Number of Successfully Processed Locations:9
    Number of Locations in Error:0

  • Error While entering GR/GI slip number in MIGO (Message no. NR751 )

    Hi Experts,
    While entering GR/GI slip number in MIGO,system throws an error
    "For object XABBELEGNR , number range interval does not exist OMJ6"
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code: OMJ6
    Configuration settings are already done in OMC1.
    external number range already maintained for this plant and year 2010 in  OMC1  OMJ6 .but still this error comes.
    would appreciate the help.

    Check these links:
    Posting a "goods issue" msg NR751
    Re: GR posting problem
    Check in OMR4 - document types in IV - document type assigned to Tcode MR11 (say KP) and then check document type tab in same Tcode for number range series assigned to doc type KP - maintain series in FBN1. You can check in NRIV database table with object RF_BELEG for number range series maintained.

  • Tax code error while entering Expense Receipts in TRIP transaction

    While entering Expense Receipts in the transaction TRIP (Travel Manager), I get an error saying..
    "Entry TAXUSJ V0  does not exist in T007A (check entry)".
    1) Please help me understand the cause for this error. As the  Travel Expense system is connected to the FI (Finance) system, is any config in the FI table causing the error?
    2) Please suggest how to resolve this error.
    Thanks

    Hi,
    TAXUSJ--Sales Tax USA w. Jurisdictions and VO is a Tax code.
    Please mainbtain above combinations in below tables and try
    GOTO SM30
    J_1BTAXCODEV
    J_1BTXMMCV
    V_T007A_DEF
    Bhairavareddy
    Edited by: Mudupu123 on Dec 14, 2010 8:04 AM

  • Error while entering number range

    Dear All
    While entering number ranges for Assets using t-code AS08 i am getting the following error:
    Company code........ 2000 does not exist
    Message no. NR011
    The company code 2000 is assigned to Chart of depreciation also.
    Please advice.
    Thanks & Regards
    Kanwaljit

    Hi,
    In AO11, for your company code 2000, you might have assigned a diff company code for number range as cross company code asset number range.
    Change it to 2000 and then go to AS08 and enter 2000 and enter the required number range intervals to it.
    Thanks,
    Srinu

  • Error while entering Applicant Data PB10

    Dear Experts...
    While entering the initial data of applicant when in save the data ann error occurs : "No application assigned to this applicant no. (Infotype Application)".
    I have checked all integration components they are working fine. I also check the number ranges they are also assigned properly. Plz help.

    Dear Delik...
    I am selecting that.... Even then system gives me error....Even number ranges are properly choosen and activated. Basically this is not error message....its simple message but system doesnot allow us to save the data. Simple message means it is marked with Green tick... not red cross.

  • Error while entering Timesheet into SAP

    Hi All,
    While entering Timesheet data into SAP through interface, we are facing an error as follows....
    "The attendance/absence type 00/INOR does not exist".
    Can anyone explain me about this error?
    How to resolve this error?
    Thanks and Regards
    Pavan

    Pavan
    Attendance type means
    general atttendance
    Over time attendance
    etc
    I belive you are trying to upload attendance infotype 2002 that infotype might have subtype which is not matching properly
    Please check
    Best Regards

  • Error while entering address details in company code master data.

    Hi Experts,
    I am getting error while i am entering address details in company code master data that is while i am creating new company code.
    ERROR: message No. AM216
                  Incomplete Address : Enter Country.
    Here eventhough i am entering country as "IN" then still i am getting error.
    Thanx,

    Yes that is right what is mentioned above, first you give the company code and name then give the currency then select address (Shift+F5) and in that if you select country as IN then it will automatically come to master data.
    Edited by: venkata986 on Aug 31, 2010 12:31 PM

  • Error while entering timecard OTL

    Dear All.,
    I am in prod. support and one of the users is getting this error:
    "No Assignment" while entering time card .
    I have checked the setup through HRMS responsibility (Enter and Maintain form)
    and see that the "Status" - is set to 'Active Assignment' .
    Does anyone has any inputs , kindly reply back.
    Please also note that in the same setup there is nothing assigned agains "Job" . -is that the reason?
    Please let me know your thoughts.
    Thanks a lot!
    Anand

    HI
    Assignment setup - must have a Payroll and Job
    Some things to check for the OTL setup
    Profile Options must be set at the Responsibility level
    HR: Business Group
    HR: Security Profile
    HR:User Type - HR with Payroll User
    MO: Operating Unit
    Element has an Hours Input Value and is non-recurring,
    Element is linked, and the Assignment is eligible for it based on the link criteria,
    Element Set created and Generate Flexfield and Mapping process run,
    Check that the element is on the OTL Information Types Descriptive Flexfield,
    Alternate Name Definition set up with elements,
    Alternate Name preference attached to the Employee,
    Preference Eligibility Criteria Effective Date prior to the timecard date

Maybe you are looking for