Error while posting material using transaction code MB1C

Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT  IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHER

Dear Siraj,
I have extended the material to warehouse numbers as you suggested.  Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER.

Similar Messages

  • "Submission status" error while posting comments using evcom

    Hi friends,
    I am  getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
    The error text goes like this :
    Error Message -
    This cell can not be updated.  Submission status must be modified to allow changes.
         010_000|2009.TOTAL|INTERCO|NOPC
    How can we get rid of this error?

    That's means the status for that specific category, time entity is approved and you can not do any changes including
    comments chnages.
    You have to change first the work status for that entity and after that you will be able to submit your comments.
    Regards
    Sorin radulescu

  • Error while posting material  in MB1c

    Hi
    how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
    Kindly help.
    Thanx.

    Hi Mukesh
    In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
    However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
    Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
    If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
    This should solve your problem
    Rukshana

  • Error While Posting documents using F-28

    Dear Friends,
                            While posting Documents using 'F-28' after I passed posting key and account number I m getting the Error
    'Entry not Possible'. Can anyone tell what may be the problem how to clear this error.
    Regards
    Balamurugan N
    Moderator message: duplicate post locked, follow up on your previous one instead of opening a new thread for the identical problem.
    Edited by: Thomas Zloch on Apr 26, 2011 8:34 PM

    Hi,
    I Guess this error is occuring because of the posting key and account number (Account type) combination is not correct. For each account type a perticular posting is is defined for debit and credit entries.
    Check with your functional the correct posting key for account type and account number you are using.

  • Getting error while posting GR using IBD from BAPI_GOODSMVT_CREATE

    Hi Experts,
    While posting GR from IBD using BAPI_GOODSMVT_CREATE with all necessary values like plant,material,mvttype and serial numbers etc...
    getting error from BAPI return "1  E VLA 315 Item 000010 requires serial numbers; use the inbound delivery dialog".
    I have tried with same IBD number from Tx: VL32N able to post Goods receipt successfully with above data,but whereas tried to post same IBD with Tx:MIGO getting same bapi error as above mentioned.
    I have tried with solutions some of the blogs from SCN but no luck
    is it necessary to implement this note in my system?
    Error message VLA315 during GR for inbound deliv. using MIGO
    Can you please give me suggestions what i have missed in my code/Configurations.
    Thanks,
    Syam

    is it necessary to implement this note in my system?
    Error message VLA315 during GR for inbound deliv. using MIGO
    Yes. Installing notes using Tx SNOTE is very easy. If you find a note that is relevant for your system, just install it.

  • Error While posting  Cenvat in T-Code J1iex.

    Dear SAP Experts,
    I am facing one error that while posting cenvat in J1iex  system is giving message as " No Cenvat Amount to be  posted, No Cenvat amount to be reversed".
    Please guide me if any one has worked on this area and faced this kind of problem.
    With Best Regards
    Debjeet Banerjee

    Hi Debjeet,
    Kindly verify
    1] Whether chapter id is maintained in the material master or not.
    2] Whether excise duty is captured in MIGO or not
    3] Also verify Movement type versus register relevance in the menu path
    Logistics gen> tax on goods movement>India-->Business transactions --> Incoming invoice -->Specify which MoT involve Excise Invoice.
    Regards,
    Amol

  • Syntax Error while Posting Material

    Hi,
    when posting material the system is throwing a message
    Syntax error in program RGIMF000
    in Include RGIMF000
    in Line 1328
    Last changed by SAP*
    Author SAP
    The data object "GLU1" does not have a component called
    "RSPONSORED_CLASS".
    Is there anyway to solve this?
    Regards,
    Ajit

    Please look at the SAP note : 656431
    Hope this helps you ...
    Symptom
    When you post data, the system terminates with a syntax error in program RGIMF000.
    The error indicates that data object GLU1 does not have a component named RSPONSORED_CLASS.
    Reason and Prerequisites
    The cause is for this problem not completely clear yet.
    Probably program RGZZGLUX, which is to be automatically started for the postprocessing after a system copy, has not run completely or has not run at all.
    Solution
    Check your postprocessing logs to see whether or not program RGZZGLUX has run correctly.
    If the program has not run at all or with errors, inform SAP and indicate how to find the log.
    To eliminate the syntax error, call Transaction SE38 and start program RGZZGLUX for generating structure GLU1 and FI-SL programs.
    It takes a maximum of 5 minutes for the program to carry out the generations.
    Make sure that NO ONE is working in the PRODUCTION system at this time, otherwise documents posted then may disappear. If you are using a test system, this should not be a problem since it is only test data.
    If the problems are still not solved after the successful run of program RGZZGLUX, contact SAP Support again.

  • Getting error while posting invoice in T-code F-02

    Hello,
    When i try to post invoice in T-code F-02 gives me the error message"There is no item category assigned to account bank a/c/company"
    Can any one suggest me why this is error came up and how to resolve this.
    Thanks,
    Lavi

    Hi,
    I think u have activated doc splitting i.e. new gl acconting. Go to
    Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting  > Classify G/L Accounts for Document Splitting
    And make setting for u r account. Also see all the nodes there are configured, to avoid any other error.
    Regards

  • Error release purchase order using transaction code me29n

    i have warning error this purchasing document number cannot be released.
    while i enter me29n t code.why?
    then how to release purchase order using me29n t code?
    can anyone answer this two questions.

    hi
    i have warning error this purchasing document number cannot be released. while i enter me29n t code.why?
    is the release strategy is triggred for the po ?? check thisin  P order in me23n ,in header level check release strategy tab ,
    then how to release purchase order using me29n t code? can anyone answer this two questions.
    just go to me29n >release strategy tab here just click on the release button in front of the release code

  • Portal run time error while accessing R/3 transaction code

    Hi all,
    We have configured R/3 system and BW system to the Portal.
    In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
    But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
    Can any body have some ideas about this , pts will be assigned,
    Thanks ..

    Have you collected the error log details which looks similar to the below one??
    "The initial exception that caused the request to fail was:
    User has no RFC authorization for function group SDIFRUNTIME.
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
    at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
    at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

  • Getting error while posting doc using BAPI BAPI_ACC_DOCUMENT_POST

    Hi,
    I am passing the value for posting key in BAPI through TAX_CODE field in ACCOUNTGL (parameter name under tables).
    It is giving error "Tax code 01 in procedure TAXR0 is invalid".
    Can anyone help me to solve this .

    Try in these :
    BAPI_ACC_DOCUMENT_POST error
    Error in using BAPI_ACC_DOCUMENT_POST (urgent!!)
    BAPI_ACC_DOCUMENT_POST - Check error
    Regards
    Neha

  • Error while creating material using MMS1

    Hi All ,
             I am trying to create material (Material type - DIEN) using MMS1.... but its giving error as "The field Component 1 is defined as a required field; it does not contain an entry" .
            Pls suggest / advice on how to correct this error ....
    Thanks ,
    Mridul .

    hi,
    i believe some finctional consultant having knowledge in MM module can easily help u out on this.
    reg,
    nj

  • Error while posting mb1c

    He seniors,
    I am getting error while posting stock in T. code- MB1C
    Error- G/L account 799999 dose not exists in company code.
    dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
    thanks......

    Dear Sundyeep,
    As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
    CHART OF ACCOUNTS (MOST URGENT)
    Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
    Thanks,
    Davinder
    Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

  • Error while receiving Item using MB1C.

    I get the following error message while receiving Item using T-Code MB1C.
    Accounting Data not yet maintained for Material NPPL 2707.
    Not sure which setup is missing. Can somebody please help?

    Dear Nitesh Patil,
    After we do a posting, the changes need to be reflected in FI and since your material master does not contain the accounting 1 and accounting 2 views you are getting this problem.
    To rectify, go to MM01 > give the same material name for which you are getting this problem > select accounting 1 and 2 views and fill up the required data.
    Hope this helps.
    Thanks
    Murtuza

  • Making ECR No. Compulsory While Changing Material BOM (T. Code CS02)

    Hi,
    In our business scenario, we want to make ECR No. compulsory while changing BOM using transaction code CS02. Process which we are looking at would be as below.
    1)     Default initial status of BOM will be set as u20182u2019 (Inactive) through customizing.
    2)     ECR No. should not be compulsory for transaction code CS01.
    3)     When BOM creation is completed, status of BOM will be changed to u20181u2019 (Active With History Requirements) by user.
    4)     When user goes to transaction code CS02 for changing BOM,
    a.     If BOM status is u20181u2019 & ECR No. is not entered, system should give error message (Message No. 29045) & should not allow user to go further.
    b.     If BOM status is u20182u2019, system should allow user to change BOM without entering ECR No.
    5)     Once BOM status is set to u20181u2019, system should not allow to change it.
    Please guide me how this process can be achieved.

    Dear Abhijit,
    If my understanding is correct then it seems you want to make change number as mandatory for CS02 alone.
    apart from the configuration settings in OS27,setting the correct value for the authorization object C_STUE_NOH,normally it will be
    made for all the T.Codes CS01/CS02.In your case you want to make it mandatory only for CS02 alone,So check in this way.
    In this case you may have to create 2 different roles,one containing the authorization only for CS01 and for authorization object
    C_STUE_NOH with Yes.
    The other role for CS02 alone for the authorization object C_STUE_NOH with value set for No.
    The same user should not be containing both these roles.(for Roles creation check with your admin consultant).
    check whether this can help you.
    Regards
    Mangalraj.S

Maybe you are looking for