Error while recover logs

Hallo, 
 
I try to recover a Database with the HP Data Protector Plug-in. I had made a Full-Backup and a Trans-Backup. These sessions were terminated successfully. 
 
After that i had deleted the Data volume and the Log volume of the database and rebooted the Server. Now I want recover the Database. 
 
Following actions are done by Data Protector: 
 Executing the dbmcli command: `user_logon'. 
 Executing the dbmcli command: `dbm_configset -raw BSI_ENV /var/opt/omni/tmp/DEMODB.bsi_env'. 
 Executing the dbmcli command: `db_admin'. 
 Executing the dbmcli command: `dbm_configset -raw set_variable_10 OB2BACKUPAPPNAME=DEMODB'. 
 Executing the dbmcli command: `dbm_configset -raw set_variable_11 OB2BACKUPHOSTNAME=n4shost.sapdb.local'. 
 Executing the dbmcli command: `util_connect'. 
 Restoring backup 2009/06/04 0020. 
 Executing the dbmcli command: `medium_put BACKDP-Data[1]/1 /var/opt/omni/tmp/DEMODB.BACKDP-Data[1].1 PIPE DATA 0 8 NO NO \"\" BACK'. 
 Executing the dbmcli command: `recover_start BACKDP-Data[1] DATA ExternalBackupID "DEMODB 09060420:1 Stream"'. 
 
 STARTING Media Agent "LTO_drive2" 
 
 Starting OB2BAR Restore: n4shost.sapdb.local:/DEMODB/Data/1 "SAPDB" 
 
 Completed OB2BAR Restore: n4shost.sapdb.local:/DEMODB/Data/1 "SAPDB" 
 
 Restoring backup 2009/06/04 0021. 
 
 Executing the dbmcli command: `medium_put BACKDP-Archive/1 /var/opt/omni/tmp/DEMODB.BACKDP-Archive.1 PIPE LOG 0 8 NO NO \"\" BACK'. 
 
 Executing the dbmcli command: `db_state'. 
 
 Executing the dbmcli command: `recover_start BACKDP-Archive LOG ExternalBackupID "DEMODB 09060421:1 Stream"'. 
 
 Starting OB2BAR Restore: n4shost.sapdb.local:/DEMODB/Data/1 "SAPDB" 
 
 Completed OB2BAR Restore: n4shost.sapdb.local:/DEMODB/Data/1 "SAPDB" 
 
 Executing the dbmcli command: `db_state'. 
 
 Executing the dbmcli command: `recover_start BACKDP-Archive LOG ExternalBackupID "DEMODB 09060421:2 Stream"'. 
 
 Error: SAPDB responded with: -24920,ERR_BACKUPOP: backup operation was unsuccessful 
The database was unable to fulfill a request (-1, ). 
. 
 
 Executing the dbmcli command: `exit'.
 
 
 
The recovery of the last Full-Backup is successful. But the logfiles not. 
 
First time I get this error in the Kernel log: 
2009-06-04 17:25:57 35 ERR 11000 d0_vatta Cannot open volume, No such file or directory 
2009-06-04 17:25:57 35 ERR 11000 d0_vatta Volume name 'DISKL0001'
 
(DISKL001 is my Database Log file) 
I had generated a new Log-File with db_activate. 
 
Now I get: 
2009-06-04 17:50:09 24 ERR 51080 SYSERROR -9407 unexpected error 
2009-06-04 17:50:09 24 ERR 3 Admin Kernel_Administration.cpp:606 
2009-06-04 17:50:09 24 ERR 3 Admin 2009-06-04 17:50:09 Admin Error 3 
2009-06-04 17:50:09 24 ERR 3 Admin Database state: OFFLINE 
2009-06-04 17:50:09 24 ERR 3 Admin + Log_Volume.cpp:342 
2009-06-04 17:50:09 24 ERR 3 Admin + 2009-06-04 17:50:09 Log Error 20040 
2009-06-04 17:50:09 24 ERR 3 Admin - Logrecovery is not allowed, because state of log volume is 'HistoryLost' (log must be cleared) 
2009-06-04 17:50:09 24 ERR 3 Admin + Log_Volume.cpp:343 
2009-06-04 17:50:09 24 ERR 3 Admin + 2009-06-04 17:50:09 Log Info 8 
2009-06-04 17:50:09 24 ERR 3 Admin - Log- and Data are not compatible because 'Restore Log with Log State 'HistoryLost' is not allowed'. 
2009-06-04 17:50:09 24 ERR 3 Admin + Kernel_Administration.cpp:762 
2009-06-04 17:50:09 24 ERR 3 Admin + 2009-06-04 17:50:09 Admin Warning 20025 
2009-06-04 17:50:09 24 ERR 3 Admin - Initialization of log for 'restore log' failed with 'LogAndDataIncompatible' 
2009-06-04 17:50:11 0 ERR 12009 DBCRASH Kernel exited due to signal 0(Killed after timeout with state SERVER_KILL) 
2009-06-04 17:50:11 ___ Stopping GMT 2009-06-04 15:50:11 7.6.00 Build 018-123-119-055
 
 
How can I clear the History Log. I had try rename the dbm.knl file. Now the Backup history in the dbmcli is empty. But the error is still there. 
 
Can anyone help me to fix this issue? 
 
Thanks to everyone! 
Edited by: Timm Letzel on Jun 4, 2009 6:59 PM

This is the knldiag-file: 
 
 
Thread 0x45A Task 1 2009-06-15 12:49:25 SrvTasks 31: Permanently reserved 66 servertasks for 'Backup / Restore'. 
Thread 0x45A Task 1 2009-06-15 12:49:25 SrvTasks 31: Permanently reserved 2 servertasks for 'Backup / Restore'. 
Thread 0x45A Task 1 2009-06-15 12:49:25 SrvTasks 31: Permanently reserved 1 servertasks for 'Savepoint'. 
Thread 0x45A Task 1 2009-06-15 12:49:25 RTETask 18: Kernel initialization done 
 DESCRIPTION: 
 The initialization of the Kernel components has finished. All special tasks are started now. 
Thread 0x45B Task 232 2009-06-15 12:51:48 CONNECT 12633: Connect req. (MAXDB1, T232, connection obj. 0x2afdf1840070, Node:'n4shost-stby.sapdb.local', PID: 1065) 
Thread 0x45B Task 231 2009-06-15 12:51:51 CONNECT 12633: Connect req. (MAXDB1, T231, connection obj. 0x2afdf1840348, Node:'n4shost-stby.sapdb.local', PID: 1065) 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 112: Open of medium /var/opt/sdb/data/MAXDB1/log/DISKL0001 as number 3 for WRITE successfull 
 DESCRIPTION: 
 Opening medium /var/opt/sdb/data/MAXDB1/log/DISKL0001 as number 3 for WRITE was successfull. A medium is opened for data backup and data restoration. A database volume can also be opened as a medium. The medium received the internal number 3. 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 71: start of formatting of volume LOG_VOLUME_001 ( from file position 8192 to 52428800 ),PAGESIZE=6400,PAGE_OFFSET=1 
 DESCRIPTION: 
 Start of formatting volume LOG_VOLUME_001. Beginning to write from the 8192. byte to the size of 52428800. This matches the database page from 1 to the size of 6400 pages. The RTE header page is included here. 
Thread 0x45B Task 231 2009-06-15 12:51:51 CONNECT 12677: Client has released connection, T231 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 74: Number of pages left to format /var/opt/sdb/data/MAXDB1/log/DISKL0001:6399 
 DESCRIPTION: 
 Since formatting the volume /var/opt/sdb/data/MAXDB1/log/DISKL0001 takes some time, every 5 seconds the amount of remaining pages is put out. Currently 6399 pages are left. 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 76: formatting of volume /var/opt/sdb/data/MAXDB1/log/DISKL0001 completed 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 114: medium /var/opt/sdb/data/MAXDB1/log/DISKL0001 with number 3 was closed 
Thread 0x45B Task 231 2009-06-15 12:51:51 CONNECT 12651: Connection released (MAXDB1, T231, connection obj. 2afdf1840348) 
Thread 0x45B Task 232 2009-06-15 12:51:51 RTEIO 10: volume LOG_VOLUME_001 has identification 2,VOLUME_NO=1 
 DESCRIPTION: 
 The volume LOG_VOLUME_001 with the logical volume number 1 is identified by 2. 
 2009-06-15 12:51:51 RTEIO 8: attach volume LOG_VOLUME_001 on /var/opt/sdb/data/MAXDB1/log/DISKL0001,VOLUME_NO=1 
 DESCRIPTION: 
 The volume of the type LOG_VOLUME_001 with the logical number 1 and the path of /var/opt/sdb/data/MAXDB1/log/DISKL0001 is being attached. 
Thread 0x45B Task 232 2009-06-15 12:51:51 RTEIO 11: detach of volume LOG_VOLUME_001 path /var/opt/sdb/data/MAXDB1/log/DISKL0001 
 DESCRIPTION: 
 The volume LOG_VOLUME_001 is being detached from the active database configuration. The used path is /var/opt/sdb/data/MAXDB1/log/DISKL0001. 
Thread 0x45B Task 232 2009-06-15 12:51:51 RTEIO 10: volume LOG_VOLUME_001 has identification 2,VOLUME_NO=1 
 DESCRIPTION: 
 The volume LOG_VOLUME_001 with the logical volume number 1 is identified by 2. 
 2009-06-15 12:51:51 RTEIO 8: attach volume LOG_VOLUME_001 on /var/opt/sdb/data/MAXDB1/log/DISKL0001,VOLUME_NO=1 
 DESCRIPTION: 
 The volume of the type LOG_VOLUME_001 with the logical number 1 and the path of /var/opt/sdb/data/MAXDB1/log/DISKL0001 is being attached. 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 112: Open of medium /var/opt/sdb/data/MAXDB1/data/DISKD0001 as number 2 for WRITE successfull 
 DESCRIPTION: 
 Opening medium /var/opt/sdb/data/MAXDB1/data/DISKD0001 as number 2 for WRITE was successfull. A medium is opened for data backup and data restoration. A database volume can also be opened as a medium. The medium received the internal number 2. 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 71: start of formatting of volume DATA_VOLUME_0001 ( from file position 8192 to 1073741824 ),PAGESIZE=131072,PAGE_OFFSET=1 
 DESCRIPTION: 
 Start of formatting volume DATA_VOLUME_0001. Beginning to write from the 8192. byte to the size of 1073741824. This matches the database page from 1 to the size of 131072 pages. The RTE header page is included here. 
Thread 0x442 Task - 2009-06-15 12:51:51 RTEIO 74: Number of pages left to format /var/opt/sdb/data/MAXDB1/data/DISKD0001:131071 
 DESCRIPTION: 
 Since formatting the volume /var/opt/sdb/data/MAXDB1/data/DISKD0001 takes some time, every 5 seconds the amount of remaining pages is put out. Currently 131071 pages are left. 
Thread 0x45B Task 231 2009-06-15 12:51:52 CONNECT 12633: Connect req. (MAXDB1, T231, connection obj. 0x2afdf1841678, Node:'n4shost-stby.sapdb.local', PID: 1065) 
Thread 0x45B Task 231 2009-06-15 12:51:52 CONNECT 12677: Client has released connection, T231 
Thread 0x45B Task 231 2009-06-15 12:51:52 CONNECT 12651: Connection released (MAXDB1, T231, connection obj. 2afdf1841678) 
Thread 0x45B Task 231 2009-06-15 12:51:54 CONNECT 12633: Connect req. (MAXDB1, T231, connection obj. 0x2afdf1841678, Node:'n4shost-stby.sapdb.local', PID: 1065) 
Thread 0x45B Task 231 2009-06-15 12:51:54 CONNECT 12677: Client has released connection, T231 
Thread 0x45B Task 231 2009-06-15 12:51:54 CONNECT 12651: Connection released (MAXDB1, T231, connection obj. 2afdf1841678) 
Thread 0x442 Task - 2009-06-15 12:51:56 RTEIO 76: formatting of volume /var/opt/sdb/data/MAXDB1/data/DISKD0001 completed 
Thread 0x442 Task - 2009-06-15 12:51:56 RTEIO 114: medium /var/opt/sdb/data/MAXDB1/data/DISKD0001 with number 2 was closed 
Thread 0x45B Task 232 2009-06-15 12:51:57 RTEIO 10: volume DATA_VOLUME_0001 has identification 3,VOLUME_NO=1 
 DESCRIPTION: 
 The volume DATA_VOLUME_0001 with the logical volume number 1 is identified by 3. 
 2009-06-15 12:51:56 RTEIO 8: attach volume DATA_VOLUME_0001 on /var/opt/sdb/data/MAXDB1/data/DISKD0001,VOLUME_NO=1 
 DESCRIPTION: 
 The volume of the type DATA_VOLUME_0001 with the logical number 1 and the path of /var/opt/sdb/data/MAXDB1/data/DISKD0001 is being attached. 
Thread 0x45B Task 232 2009-06-15 12:51:57 RTEIO 11: detach of volume DATA_VOLUME_0001 path /var/opt/sdb/data/MAXDB1/data/DISKD0001 
 DESCRIPTION: 
 The volume DATA_VOLUME_0001 is being detached from the active database configuration. The used path is /var/opt/sdb/data/MAXDB1/data/DISKD0001. 
Thread 0x45B Task 232 2009-06-15 12:51:57 RTEIO 10: volume DATA_VOLUME_0001 has identification 3,VOLUME_NO=1 
 DESCRIPTION: 
 The volume DATA_VOLUME_0001 with the logical volume number 1 is identified by 3. 
 2009-06-15 12:51:57 RTEIO 8: attach volume DATA_VOLUME_0001 on /var/opt/sdb/data/MAXDB1/data/DISKD0001,VOLUME_NO=1 
 DESCRIPTION: 
 The volume of the type DATA_VOLUME_0001 with the logical number 1 and the path of /var/opt/sdb/data/MAXDB1/data/DISKD0001 is being attached. 
Thread 0x45B Task 232 2009-06-15 12:51:57 DATACACH 53000: Begin data cache restart 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynpool 54003: DATACACHE STRIPES : 16 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynpool 54003: DATACACHE HASH LIST :2553088 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynpool 54003: DATACACHE head item siz: 16 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynpool 54003: DATACACHE CONTROLBLOCKS:4954112 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynpool 54003: DATACACHE cblock size : 128 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 20 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 30 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 40 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 50 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 60 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 70 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 80 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 90 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 95 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 KernelDBE_ 20005: data cache size rise above 99 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynpool 54003: DYNP_B20_DATACACHE :7816832 
Thread 0x45B Task 232 2009-06-15 12:51:57 dynDATA 54003: DYND_B20_DATACACHE : 38704 
Thread 0x45B Task 232 2009-06-15 12:51:57 DATACACH 53000: Finish data cache restart 
Thread 0x45B Task 231 2009-06-15 12:51:58 CONNECT 12633: Connect req. (MAXDB1, T231, connection obj. 0x2afdf18435f8, Node:'n4shost-stby.sapdb.local', PID: 1065) 
Thread 0x45B Task 231 2009-06-15 12:51:58 CONNECT 12677: Client has released connection, T231 
Thread 0x45B Task 231 2009-06-15 12:51:58 CONNECT 12651: Connection released (MAXDB1, T231, connection obj. 2afdf18435f8) 
Thread 0x45B Task 232 2009-06-15 12:51:58 DATACACH 53000: Begin data cache shutdown 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 95 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 90 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 80 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 70 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 60 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 50 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 40 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 30 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 KernelDBE_ 20006: data cache size fell below 20 percent of initial size 
Thread 0x45B Task 232 2009-06-15 12:51:58 DATACACH 54003: Released cache frames: 38704 
Thread 0x45B Task 232 2009-06-15 12:51:58 DATACACH 53000: Finish data cache shutdown

Similar Messages

Getting error while fetching Log data using B1TE Tools

Hi,
i am using B1TE Tools to test an add on which generating an error while fetching the Log File using DI Logs Reader. The error is below:
"Wrong Xml file format. "The data at the root level is invalid, Line 1, position 1.".
please report it on B1TE blog"
Please help..
Regards,
Sunita

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while recovering datafile using rman

Hi Friends,
I was trying to recover the deleted datafile 5 , but getting the following error... ( oracle 10g , database archive log mode )
RMAN> startup
database is already started
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 02/28/2012 10:54:30
ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
ORA-01110: data file 5: 'F:\ORACLE\ORADATA\DEMO\DEM01.DBF'
RMAN> restore datafile 5;
Starting restore at 28-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
released channel: ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/28/2012 10:54:49
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
RMAN>
Whats the way out...

RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
ult
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 100 M;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 100 M;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'G:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\S
NCFDEMO.ORA'; # default

Error while viewing log in the portal

Hi,
When i try to access the log files in the portal, i get this error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.logviewer620.logviewer
Component Name : com.sap.portal.logviewer620.logviewer
The exception was logged. Inform your system administrator..
Exception id: 04:31_12/05/06_0030_4049850
See the details for the exception ID in the log file
Any clues as what the problem must be. Please do let me know.
Regards,
Akash

Hi James,
This component is not available in EP7. To view the logs use the url http://<host>:<port>/nwa > Monitoring.
Cheers!!

Got error while recover controlfile with rman

Dear all,
My controlfile and some datafiles were crash and i tried to recover their with rman as the following step:
1. startup nomount;
2. restore controlfile from autobackup;
3. alter database mount;
4. restore database;
5.SELECT archivelog_change#-1 FROM v$database;
ARCHIVELOG_CHANGE#-1
1301671
6.run {
set until scn 1301671;
recover database;
executing command: SET until clause
Starting recover at 01 พ.ย. 2006
using channel ORA_DISK_1
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 11/01/2006 15:38:01
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database reco
ver if needed
start until change 1301671 using backup controlfile
ORA-00283: recovery session canceled due to errors
ORA-01190: controlfile or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\DB01\SYSTEM01.DBF'
What happend? Please give me some advise.
Thaks for advance !
Chara

After every resetlogs you have to take fresh backup.
It seems you have opened your database in resetlogs and your backup is prior to this resetlogs.So the controlfile is showing inconsistance with the other datafiles.

Error: while configuring logs for changes in infotype data

Hi All,
I am configuring the following Tables for maintain logs for changes in infotype data.
V_T585A, V_T585B and V_T585C
While configuring V_T585B, when i input * in 'field name' column it gives me an warning message " All data fields in **** infotype 31 will be deleted.
Please let me know, what does this warning message means?
Also, How is the report RPUAUD00 read?
Regards
Simran

Hi Simran,
you are not suppose to give the IT 0031-Reference Personnel Numbers in these tables. why because this will done at the time of Employee hiring only and we don't change this. if you change you will lost the old data in the IT.
Normally we assign only the IT which we change frequently for the master data. example like 0 1 2 7 8 9 27 582 - 589 2001 2006.
if you are configuring today means from today on-wards any changes had made to these IT's you can see in the report. before changes will not be seen. in the report you have to choose either long-term document / short-term document and remaining fields as per the requirement.
Regards,
Praneeth kumar

Error while Changing log level in Agentry 6.0.44.1

Hi ,
I am trying to change the log level from the Agentry Administration client, but i am getting the below error message.
And it is showing any option to change the log levels for users. How can I change log level for users also.
How can I resolve this error.
Regards,
Shyam

Shyam,
This is fixed or planned fixed in 6.0.46 Agentry Server (supposed to be available anytime soon in the Service Marketplace - it was submitted already to the SMP team). The fix was in SMP 2.3 and SMP 3.0 but it was ported back to the Agentry 6.0.X release. If you have no access to the Agentry 6.0.X patches this means that your SAP License is preventing you from downloading it. You may need to contact the SAP CIC (customer interaction center) group.
Or you can do the manual setup for a workaround for now.
SAP KBA article: 2048202 - AgentryGUI does not allow to change log settings - Not all setttings were successfully changed.
Regards,
Mark Pe
SAP Senior Support Engineer (Mobility)

Error while recovering

i put the recovery disc in laptop, after it asks for all the disks and copies all the files to hdd it resstarts but at the beginning of process it says "An unmaed file was not found"
the error is so unclear, what should i do?
i have dv6 3190ee, it's the windows 7 64bit recovery, i have totally formated the HDD, and deleted all partitions,including recovery(after it gave me the error i installed ubuntu linux, so the recovery partition was healthy when it gave me the error)
This question was solved.
View Solution.

Hi,
If you have or can borrow a retail Windows 7 installation disc ( it must be exactly the same version so if your notebook came with Windows 7 Home Premium 64bit, this is the retail disc you must use ), you can use this disc to perform the installation. When you get to the point of entering the Activation Key, use the one on your notebooks COA sticker ( on the underside of your notebook ) and then complete the installation.
When the installation has completed, open windows Control Panel and open System. You will probably see that Windows is not yet activated - use the 'Phone Method' described in the link below to perform the activation.
Activate Windows 7 - Phone Method.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error while recovering laptop.

I was restoring my laptop with the included CD, when towards the end it said an error occurred. The CD popped out, and the computer shut down.
I started the computer again and put the CD back in.
It says that System32 was deleted (which I know is necessary for the computer to run) and to replace the file.
The CD does nothing.

what was the exact error that it said before the system shut down. post exactly what was on the screen in its own line of your reply.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Unexpected Error while looging in to FR Studio

Hi
We are using FR studio 11.1.1 and getting error while user logs in. it shows following error
"An unexpected error occurred".
and then blank repository is shown to user. No reports are shown and available for editing.
This error we get intermittently...till last week it was working fine and today it started popping up..
we are using FR studio to connect to Prod and QA servers. Prod its fine but QA it shows this error.
Any help appreciated.
Thanks
Shyam

Check out the following support doc ID 1111287.1:
1 - You are trying to connect to 2 different Financial Reporting Reports Servers from one Financial Reporting Studio, one server name works but the other does not you may get one of these or both errors:
a) "Unexpected error occurred"
Then as soon as you close that error, you immediately get this error:
b) "DatasourceIDLoginLoadDatasoureceName Error: -2147467259 Error Loading DatasourceList to Repository"
If you only see error b) then go to Step 2.
If you only see error a) then go to Step 3.
If you see both errors a) and b) then you need to check in hyperion\common\config\9.5.0.0 for the reg.properties file on your Financial Reporting Studio machine. If you find this file there then rename it to something different and save it. Then go back to make sure the file has been renamed. If you do not find this file, then refer to Doc ID 1109585.1 for more Financial Reporting Studio connectivity troubleshooting.
2 - If you only see error b), locate the HReports.jar and Foundation.jar files on the Financial Reporting Reports Server and the client machine and do a comparison of size, date and location.
In versions 11.1.1.1 and 11.1.1.3:
The HReports.jar file is located in \Hyperion\products\biplus\lib.
The Foundation.jar file is located in \Hyperion\products\Foundation\workspace\lib.
In 11.1.1.2:
The HReports.jar file is located in \Hyperion\products\biplus\lib.
The Foundation.jar file is in both lib folders -- the one for Foundation and the one for BIPlus.
Both of these files need match exactly in size, date and location. If they match exactly, then refer to Doc ID 1109585.1 for more Financial Reporting Studio connectivity troubleshooting.
3 - If the HReports.jar and the Foundation.jar file do not match exactly in size, date and location on the Financial Reporting Reports Server and the desktop Financial Reporting Studio, then:
a. Rename the the HReports.jar and the Foundation.jar on the client machine.
b. Stop all Hyperion Financial Reporting services on the Financial Reporting Reports Server.
c. Copy both of these files over from the Financial Reporting Reports server to the same locations on the client machine.
d. Restart all Hyperion Financial Reporting services on the Financial Reporting Server.
e. Go back to the Financial Reporting Studio log in page. Log in testing the different Financial Reporting Servers to make sure they work properly.
f. If they do not, refer to Doc ID 1109585.1 for more Financial Reporting Studio connectivity troubleshooting.

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
 at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
 ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
 at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
 ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe

Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while trying to log into dealer portal - Organisational data not main

Error while trying to log into dealer portal - Organisational data not maintained. This is happening for a specific user.
This information is used in the URL for the VMS dealer portal.
<Protocol>://< Host Name>:<Port>/sap/bc/bsp/sapdii/dwb/c_vms_main.do?sap-client=<Client number>
Does anyone have any experience of similar problem ?

so why are you posting this to Oracle database forum?
I see nothing involving the database.

Error while logging to OIM11g

Hello experts,
after deploying in WLS a simple java class just to test the login functionality, I'm not anymore able to access to OIM logging through the user form, while I'm still able to login through SSO.
When I try to login I get the following error into the log:
+<Apr 26, 2012 9:54:55 AM CEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /OIM/opt/oracle/middleware/user_projects/domains/oim_domain/servers/oim_server1/logs/oim_server1.log00861. Log messages will continue to be logged in /OIM/opt/oracle/middleware/user_projects/domains/oim_domain/servers/oim_server1/logs/oim_server1.log.>+
+<Apr 26, 2012 9:55:04 AM CEST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <BEA-000000> <Class/Method: tcDefaultDBEncryptionImpl/initKeyStore encounter some problems: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oim,keyName=.xldatabasekey read)+
java.security.AccessControlException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oim,keyName=.xldatabasekey read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:374)
at java.security.AccessController.checkPermission(AccessController.java:546)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:436)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:496)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:519)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:611)
at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.containsCredential(SspCredentialStore.java:299)
at oracle.iam.platform.utils.config.OIMPrivilegedExceptionAction.run(CSFCredentialProvider.java:205)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.iam.platform.utils.config.CSFCredentialProvider.getPassword(CSFCredentialProvider.java:75)
at oracle.iam.platform.utils.config.standalone.StandAloneCryptoConfig.getPassword(StandAloneCryptoConfig.java:80)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.initKeyStore(tcDefaultDBEncryptionImpl.java:67)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.getCipher(tcDefaultDBEncryptionImpl.java:96)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.encrypt(tcDefaultDBEncryptionImpl.java:193)
at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:118)
at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:275)
at oracle.iam.platform.auth.impl.Authenticator.encrypt(Authenticator.java:185)
at oracle.iam.platform.auth.impl.Authenticator.authenticateWithPassword(Authenticator.java:160)
at oracle.iam.platform.auth.impl.Authenticator.authenticate(Authenticator.java:133)
at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMAuthLoginModule.java:44)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor576.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
and..
+<Apr 26, 2012 9:55:04 AM CEST> <Error> <OIM Authenticator> <BEA-000000> <Error encrypting password>+
javax.security.auth.login.LoginException: Error encrypting password com.thortech.xl.crypto.tcCryptoException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oim,keyName=.xldatabasekey read)
at oracle.iam.platform.auth.impl.Authenticator.encrypt(Authenticator.java:189)
at oracle.iam.platform.auth.impl.Authenticator.authenticateWithPassword(Authenticator.java:160)
at oracle.iam.platform.auth.impl.Authenticator.authenticate(Authenticator.java:133)
at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMAuthLoginModule.java:44)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor576.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
I did reference to the following topic:
Unable to login to OIM 11g admin console
OIM 11g - Unable to login into OIM Administrative and User console
but none of them resulted useful, we both check into the file system the files that may be with the wrong access rights, we also applied the metalink node "1327577.1", but we got no good result.
We undeployed the jar that we think gave us this problem, we also removed it from the WLS cache, we restarted the server, we restarted the machine, but the situation is still the same.
Do you have any idea?
Thanks for your help

I didn't find any solution, at the end the faster solution have been the one of restore an old backup of the OIM_DOMAIN.
We just cross the fingers and we hope that it wont happen again.
Thanks

Error while logging into BI Publisher

Hello All,
I get the below error while logging into BI Publisher with the Default credentials
"oracle.apps.xdo.servlet.resourc eNotFoundException: %s_Reports_Path%/Admin/Security/principals.xml "
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi ,
Check the following thread
BI Publisher login fails
May be the same issue is sloved...
Thanks,
Ananth

Error while recover logs

Similar Messages

Maybe you are looking for